Best turbocharger & supercharger parts according to redditors
We found 30 Reddit comments discussing the best turbocharger & supercharger parts. We ranked the 21 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 30 Reddit comments discussing the best turbocharger & supercharger parts. We ranked the 21 resulting products by number of redditors who mentioned them. Here are the top 20.
Way too expensive IMO. Here's one for $99
That'll save you enough for this quality blow off valve
Get something like this and install it on the pipe between the intercooler and throttle body.
https://www.amazon.com/Turbo-Valve-Flange-Adapter-Type-S/dp/B00U4A3GGG
Make sure the flange matches what you have currently
I'd recommend against modifying the intercooler.
link
Sounds like you have a bad bypass valve. Time for an upgrade. Just buy a blow off valve and replace it. Easy install.. Takes about 20 min, if that.
https://www.amazon.com/Boomba-Racing-BLOW-VALVE-Focus/dp/B01IJ6M824/ref=sr_1_4?crid=2ZF5H7D1OEWPW&keywords=boomba+blow+off+valve+focus+st&qid=1565374069&s=gateway&sprefix=boomba+blow+off+%2Caps%2C160&sr=8-4
It could be that too.
Here's another example of a finished product if it helps. https://www.amazon.com/Aluminum-Intake-Turbo-Intercooler-Piping/dp/B00KSVDJYK
Sure, looks like a few places make intercooler kits, there isn't enough room for a supercharger so you'll have to stick to turbo(s).
Basically you're doing your turbo conversion at the same time since the plumbing in these kits are designed for turbo versions.
Then you'll really have cold, condensed air, instead of just sticking a cone in a wheel well that doesn't really do anything.
Tl;dr: Skip what you're trying to do now, go all the way later.
Ignore the title.... and the wron measurements in the picture lol. This is by far the cheapest and most useful mod on my car, the only thing not "name brand" and i absolutely love it. I have 0 regrets.https://www.amazon.com/dp/B07DNZG5KY?ref=ppx_pop_mob_ap_share
The intercooler is actually just sitting on the rad support. I think I put rubber under the feet. You can see in one of the pics the bar that spans the 2 verticals. The bolts through that have hooks on the end and hook to the bar of steel bolted to the top of the IC to kind of clamp it in place. It's not perfect but it works. It's simple and makes it relatively easy if I have to pull it for some reason.
This is the actual kit I used to plumb mine. Had to order a few other adapters to make it hook up to the turbo and intake manifold, but that's about it.
https://www.amazon.com/dp/B00EW9D796/ref=cm_sw_r_other_apa_SlwUBbTXJPTBB
Edit: Sorry if I like to ramble. I'm weirdly passionate about two things.
Oh, and turbochargers. Everything should be diesel and turbocharged in my world. Haha
I'm not aware of any specific products, but if they were out there, I assume it would've just been a standard (and overpriced) silicone sleeve - which you could just measure the E-Nano's diameter and match it to the I.D. of a piece of silicone tubing yourself.
They're generally not too expensive and you can pick from any color/style. You can get a non-glossy style that looks pretty clean (can't see the ridges) and has a nice "fabric-y" feel to them. I run them on one of my cars, don't remember where I got them though...
https://www.amazon.com/dp/B00CB20PD2/
Those are meant for motor/plumbing system applications, which is likely what you're going to see in the size you'd need. They'll work fine, but you may get a bit of a rubbery smell when warmed for a while...
You could also use a wrist (sweat) band. The ones I have would fit perfectly around an E-Nano without slipping, but it's putting nylon near an electric heater. I don't think it would be an issue, but I don't know how much that would bother you.
https://www.amazon.com/Nike-Dri-Fit-Home-Doublewide-Wristbands/dp/B00I3VN596
I um...use those on my all aluminum shift knob in the Winter/Summer.
I have no idea why any idea I'm coming up with is from my damn cars lol.
Past that, I don't really know dude.
Anything else I can think of is probably gonna look ghetto or leave adhesive/residue on the E-Nano...which I'd avoid.
Boomba Racing BLOW OFF VALVE SILVER for 2013+ Ford Focus ST https://www.amazon.com/dp/B01IJ6M18K/ref=cm_sw_r_cp_apa_79eMBbR5CBT7M
Turbosmart TS-0203-1061 Blow-Off... https://www.amazon.com/dp/B00IGWW5UC?ref=ppx_pop_mob_ap_share
Ok so I am looking at these items
[https://www.amazon.com/gp/product/B000CMHIR4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A15DTMM40CG6VX](Green Air)
and
https://www.amazon.com/gp/product/B00IGWW5UC/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A26YKA1AMO7VO
The part number should be.. 15192AA501
https://www.amazon.com/Subaru-15192AA501-Oil-Feed-Line/dp/B00IGZR7HK
or aftermarket
https://www.rallysportdirect.com/part/oil-feed-lines-and-fittings/ste-ss-sub-sti-ofl-01-steamspeed-avcs-journal-bearing-turbo-oil-feed-line
http://www.fastwrx.com/products/turbo-oil-feed-line-04-wrx-sti
https://www.amazon.com/Twin-Intercooler-Upgrade-Silicone-Volkswagen/dp/B07DNZG5KY/ref=sr_1_4?crid=2KUNVSXXNUR3J&keywords=mk7+gti+intercooler&qid=1572322561&s=automotive&sprefix=mk7+gti+inter%2Cautomotive%2C-1&sr=1-4
​
Is it this one?
Mishimoto MMINT-FOST-13BK Black Ford Focus ST Performance Intercooler, 2013+ https://www.amazon.com/dp/B07BPWVJVV/ref=cm_sw_r_cp_apa_i_8fx2Cb1FT2YHT
Yes because that means you're getting back pressure through your turbo. Here's the exact solenoid I replaced mine with. Only took about 15 minutes, havent had an issue since.
Tier1 Motorsports Push Lock Vacuum kit with Mac Boost Control Solenoid 35A-AAA-DDBA-1BA Turbo Honda Acura Universal fit https://www.amazon.com/dp/B019EUO02A/ref=cm_sw_r_cp_apa_i_6-LDDbMDXMH2Q
Here is the desktop version of your link
Oh yeah I actually did it in the fall on my '06 DC SR5. Right before they switched to the winter blend and my mileage went down to 13 or 14 over the winter. But now that the summer blend is back, I get 17+ mpg. But I also replaced my spark plugs and got new tires, so maybe it helped?
I used this silicone tube: https://smile.amazon.com/gp/aw/d/B00TGPJVCI/ref=ppx_yo_mob_b_inactive_ship_o0_img?ie=UTF8&psc=1
Where are you seeing $250? CJ has it for $170, and its $157 on amazon.
http://www.amazon.com/Turbosmart-TS-0203-1061-Blow-Off-Valve/dp/B00IGWW5UC/
Turbosmart TS-0203-1061 Blow-Off... https://www.amazon.com/dp/B00IGWW5UC?ref=ppx_pop_mob_ap_share
The dual port shortie is the 100% recirculating BOV. There is no ventilation into the atmosphere so you will not get the “pshhhh” sound when you close the throttle.
No none at all. It's honestly the perfect amount of noise. Loud enough for me when I want it, but quiet when I want it quiet.
The bov I have is www.amazon.com/Turbosmart-TS-0203-1061-Blow-Off-Valve/dp/B00IGWW5UC
Very easy install. Placement of BOV is behind front right wheel.
I have decided to start my upgrades with a new intercooler, a cold air intake and blacking out the chrome. I really have no idea about quality parts so can someone let me know if this intercooler is of quality: http://www.amazon.com/Godspeed-Evolution-Evo10-Ralliart-Intercooler/dp/B007SQ2HTG/ref=pd_sim_sbs_auto_1
Also if someone could recommend to me a good quality air intake, that would be awesome. After these mods my goal is to get a catback exhaust and the boost pill. Little by little I will get there. Thanks for you help!
Okay you guys helped me with my seats now i need some help making sure i got everything. im a next to a total noob hardest thing ive done is the quest alternator swap and rejetting my motorcycle carb. i've ordered some parts already and done a couple days worth of pouring over the forum guides and everything but just want to grab some advice. please and thank you, heres my tail for the troubles. ps sorry for format and everything. edit: going for a light build 7psi or so, engine is healthy rebuilt 15k or so miles ago. already have a air filter cone installed didnt know if i needed a different one.
injectors - ordered
https://www.ebay.com/itm/4x-OEM-NISMO-Yellow-Side-555cc-Fuel-Injectors-16600-RR543-For-Nissan-SR20DET/172633776477?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
maf - ordered
https://www.ebay.com/itm/22680-30P00-Fits-INFINITY-J30-NISSAN-300-300ZX-Z32-MASS-MAF-AIR-FLOW-SENSOR/181604925459?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
fuel pump - ordered
https://www.ebay.com/itm/Fuel-Pump-For-1990-1996-Nissan-300ZX-3-0L-6Cyl-Eng-Pump-Motor-w-Strainer/232264026350?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
manifold
https://www.enjukuracing.com/products/isr-performance-v2-tubular-exhaust-turbo-manifold-nissan-240sx-ka24de.html
intercooler
https://www.enjukuracing.com/products/isr-performance-m-spec-front-mount-intercooler-kit-nissan-240sx-ka24de.html
fuel filter - ordered
https://www.enjukuracing.com/products/isr-performance-oe-replacement-nissan-300zx-fuel-filter-sr20det.html
oil feed
https://www.amazon.com/gp/product/B00SA3TSXE/ref=ox_sc_act_title_1?smid=A2K3YY3CMSFPZ6&psc=1
blowoff
https://www.amazon.com/gp/product/B006C52VZ4/ref=ox_sc_act_title_2?smid=AA2G6TND0MHNU&psc=1
turbo - ordered
https://inlandempire.craigslist.org/pts/d/240sx-sr20-sr20det-garrett/6477969501.html
edit: oops forgot to find a means of boost control.. any suggestions?
That’s the same i have! In the kit it includes this little metal adapter that’s necessary for recirculation. If you got the bov second hand then he might not have given that part to you. You have to separately buy the rubber hose to have it vent though.
https://www.amazon.com/HKS-71002-AK004-SSQV-Recirculation-Fitting/dp/B00567A8QS
https://edgeautosport.com/hks-ssqv-recirculation-kit-mazdaspeed-3-2007-2013-mazdaspeed-6-2006-2007/
https://www.amazon.com/gp/aw/d/B00368PEQ8/ref=mp_s_a_1_1?ie=UTF8&qid=1482302497&sr=8-1&pi=SX200_QL40&keywords=mishimoto+intercooler&dpPl=1&dpID=31-vnThFlYL&ref=plSrch
This link
Car Fake Dump Valve Electronic Turbo Blow Off Valve BOV Analog Sound for Honda Toyata Mazada https://www.amazon.com/dp/B06Y22YQQ4/ref=cm_sw_r_cp_api_ZIbtzbXSP4QAH