(Part 2) Top products from r/HTC10

Jump to the top 20

We found 20 product mentions on r/HTC10. We ranked the 46 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/HTC10:

u/Just2_Stare_at_Stars · 2 pointsr/HTC10

https://www.amazon.com/Love-Ying-Anti-Scratches-Flexible-Protective/dp/B01DB6SR8Q

I've had this case since July/August when I bought the topaz gold HTC 10. It's the greatest, non-staining, non discoloration, just enough grip, soft TPU case ever. I wanted the gold 10 so bad, finally got it through T-Mobile, and now can still show off my phone. Pics don't do it justice. Just enough lip over the screen to keep the screen perfect. I've had zero scratches. My phone is basically still brand new. I've dropped it about 3 times on accident (not intentional dropping) and it's done beautifully.

I am not sure how much you're okay with not having a hybrid or some lack of hard material on the exterior of your case, but I never have and these kinds of clear, soft TPU are incredible.

I recommended this case to my co-worker and now he has it with his gray HTC 10. He's happy as fuck.

u/Murphysburger · 2 pointsr/HTC10

Here is a similar one I bought a year ago, it has been perfect, except now it's starting to yellow a little. The HTC 10 is really a great phone, isn't it?

[Another slim cover ] (https://www.amazon.com/dp/B01BRD1WXW/ref=cm_sw_r_cp_apa_aa48ybSRD1AT9)

u/bonesingyre · 3 pointsr/HTC10

The charger isn't compliant with the USB charging spec, not the cable. I bought this. It's pretty good and "Benson" approved

u/SpydreX · 1 pointr/HTC10

These are the ones I use: https://www.amazon.com/Comply-Foam-Premium-Earphone-Tips/dp/B002OOWBWK

They slightly degrade the clarity of the highs but not by much as long as you roll them right. I use them because they really widen the soundstage and give an overall warm sound to the music. They also conform to your ear and are very comfortable. Since you have momentums which are a differnt size eartip you would want these: https://www.amazon.com/Comply-Premium-Earphone-Sennheiser-Momentum/dp/B01JAT1F5K/ref=sr_1_1?s=electronics&ie=UTF8&qid=1494733116&sr=1-1&keywords=sennheiser+momentum+comply

u/Tycow · 1 pointr/HTC10

Can do!
This is the mount. It sits nicely in an airvent.


The mount came with a metal plate for the phone case, however I ordered a couple of replacement plates too.


Hope this helps! :)

u/ggKevin · 1 pointr/HTC10

This and this are both amazing cards. I use the 64GB Sandisk, myself.

u/csoulr666 · 1 pointr/HTC10

Here's one I got that supports fast charging as well

u/failsafe0 · 2 pointsr/HTC10

I see; the large center section gives it rigidity for first placement. But yes, you're right I've already got the screen attached internally so I will have to remove it.

I ended up purchasing one from a local phone repair shop as Witrigs was 5-10 days shipping at best (... and for $25 in shipping charges). Buying locally only cost me $5, (score!). If I mess it up I'll go get another one.

I think I'll try this tomorrow.

EDIT: I did this. I ended up cutting a line up the side of the adhesive and I DIDN'T remove the center as there didn't appear to be a good way to do so. Mine came with an antennae (or wifi?) cutout for the center of the screen. I think all of the adhesive is actually important to stabilize the screen (or it was, in my case).

I still noticed after putting it all meticulously back together that the side stuck up a little bit. I purchased a new Spigen HTC 10 Case from amazon and the lip of the case extends past where the screen meets the frame. Otherwise I'd feel uncomfortable about it peeling and subsequently cracking the screen again. I also purchased a screen protector (tempered glass from Amazon, I believe) and put that on. My only complaint is that there's a couple mm around the edges that's unprotected from the screen and the case.

u/cajunflavoredbob · 2 pointsr/HTC10

It is going to heat up a bit while charging with any version of QC. QC raises the voltage with the amperage to let your phone charge faster. Whether it uses 5, 9, or 12 volts is determined by your phone's specs and what the charger can output.

It doesn't get too hot to pick it up. It gets noticeably warm with internal temperatures reaching around 32-35C or so. Idle temperature, for comparison, is around 28C. When you pick it up, it will feel kind of warm, but not hot. Your phone can take much higher temperatures than what it experiences during charging, so you're not causing any damage.

I have personally used all of the following Benson approved USB type-C items.

u/TimmyP7 · 1 pointr/HTC10

I have the older version of this and it works great. Charges quite quickly, but not as fast as the one that came with the phone. https://www.amazon.com/dp/B01LCDJ7LG/ref=cm_sw_r_cp_apa_sd4-ybBYAN333

u/Ypallage · 1 pointr/HTC10

I bought it from Amazon, this one

u/xGetSweatyx · 1 pointr/HTC10

Found this deal awhile ago. 6 cables for the price of one. Can't beat it

AUKEY USB-C to USB 3.0 Cable Braided Nylon (5-Pack 3.3ft x 3, 6.6ft x 1, 1ft x 1) for Samsung Galaxy S8, Nexus 6P 5X, Google Pixel, LG G5 V20, HTC 10 and More https://www.amazon.com/dp/B01B634WNK/ref=cm_sw_r_cp_apa_AG6-ybFMHG3T4

u/whereisdelete · 1 pointr/HTC10

Cable was a Tronsmart compatible with HTC 10.
Actual reference: http://www.amazon.com/dp/B018S34AWO

u/NiceGuysFinishLast · 2 pointsr/HTC10

You may have issues as it is only a class I card. Class 3 is recommended.

You want UHS class 1, speed class 3.

I know, this is confusing. There is also UHS class 2, with speed classes 1-3.

UHS class 2 is fastest, but also more expensive. I have this UHS class 1, speed class 3 card. Sorry for link formatting, I'm on mobile and lazy.

https://www.amazon.com/gp/aw/d/B010NE3N3S/ref=yo_ii_img?ie=UTF8&psc=1

Card is set as internal storage, phone is blazing fast, records and plays back 4K and HD video with no problems.