Best jewelry loupes according to redditors

We found 230 Reddit comments discussing the best jewelry loupes. We ranked the 46 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top Reddit comments about Jewelry Loupes:

u/WigglestonTheFourth · 33 pointsr/mtgfinance

Exodus has color fluctuations between cards. Buy a loupe, it's $2.

u/klundtasaur · 12 pointsr/fountainpens

My vote: Nib tuning supplies. Some micromesh, and a decent loupe. Then grab one of your Jinhao nibs or a goulet steel nib and learn how to make a nib buttery smooth. Then, whatever pen you end up buying in the future, you can fix and modify to your liking.

Or, a shit ton of ink samples. Get a bunch of colors, and throw in a few "Random" ones, too. Breathe new life into pens you already love.

u/RockyMtnAristocrat · 11 pointsr/wicked_edge

Here's a copy-paste I put together that might be useful.

Equipment Essentials

  • A pro honed razor at your side. You need to compare the sharpness of the razor you're working on, with the sharpness of a razor that is shave ready. This will decrease your learning curve considerably. You're working blind otherwise.

  • DMT flattening stone. Your hones don't ship flat, and you must even them out to ensure a smooth edge. Flattening before every use is a good idea. If you don't want to buy the DMT, use 400 grit wet/dry sandpaper and atop piece of marble/glass.

  • Norton 4K/8K A popular choice for general honing, and can perform a laborious restoration/bevel set (if you do more than a few razors, get the 1k below to set a bevel).

  • A jewelers loop to see what happens to the blade as you hone, polish, stop and shave. I feel watching the scratch patterns of a straight razor bevel change is a critical educational step in straight razor bevel maintenance.

  • Chromium Oxide on a strop for final polish, or a diamond pasted strop.


    Honing Supplies for Restoring a Few Straights

  • If you end up honing a few razor from antique stores or ebay, it's good to have a stone dedicated to bevel setting. This stage is 50% of the sharpening process, so it pays to have quality gear at this level King 1000 K For bevel setting on a budget (beware, it's a slow cutter). Or a nice bevel setter like this Chosera.


  • Niawa 12K For a nice final polishing of your razor. 8K is fine, but this puts a great edge on your blade.

    To hone:

    First, you need to flatten your stone, making sure you've removed the top 1/64th or so of stone material to reach the true grits (the top is a bit rough on Nortons especially).Make sure your stone is perfectly flat. Use the DMT or the sandpaper I described above for this.

    Next, clean your SR in soap/warm water. Dry it, and put a piece of electrical tape along the spine and fold it over (like a book binding) if you'd like (not necessary, and I don't do this, but some prefer the look of the end product).

    I like to clear the edge of possible errand burs before I hone, so I drag the shaving edge against my thumbnail or a glass bottle. These burs can cause issues, and may make for a rough feeling edge. I've found that this is a good way to remove them. It may be unnecessary for some/most blades, but it's part of my bevel setting routine, and by doing this, I've notice good things and increased consistency when I hone.

    Now, to hone. You're going to get your razor sharp in these stages:

  • Set the bevel (establish the sharp edge shape)
  • Polish the bevel (polish the shape you created earlier)
  • True the bevel (strop the bevel to make sure the edge is very uniform)

    Setting the bevel:

    While all steps are important, this step is foundational. Place your razor on your bevel setting stone, keeping the razor spine and edge completely flat on the surface togehter. Do tiny circle strokes (circular motion down the hone) so you do about 30-40 tiny circles as you move own the bottom hone. Repeat on the other side of the razor, moving up the hone in the opposite direction (and counter-wise circle direction). Now do 15 x strokes. This is a set.

    Repeat doing these sets until you can shave hair on your arm or leg by very slowly grazing over the tops of the hair - it should catch and cut with a bit of a tug.

    It will take many many of these sets with a 4k stone, and less with a 1K.

    Once you can shave hair on your arm or leg all along the bevel (toe to heel) with uniform sharpness and cutting, you may be set. Do another 10 or so x-strokes, very lightly, very perfectly as a final sharpening for your bevel. See if this helps your edge.

    Once you're happy with your bevel, strop it and shave. If it's painful, it's likely your bevel isn't set. If it's decent, you're ready to move on.

    Polishing the bevel

    Now move up to polishing. On the 4K and do 35 light x strokes. Go to the 8K and do 35 light x-strokes. Repeat this back and forth going 4K 30, 8K 30. Now keep this up, decreasing the stroke number by 5. When you're at 10 strokes, just do 25 on the 8K.

    Always check for sharpness along the edge by trimming a bit of arm hair. You'll learn a lot from an edge by doing this.

    Following the grits up in this fashion should give you a fairly polished bevel. It's best to go higher than 8K with a high grit chinese hone from a woodworking store, or a naninwa 12k, but 8K will do for now.

    Truing the edge:

    Strop about 30 passes on your chromium oxide, clean the blade, and the perform 200 passes on leather - all spine leading, done very lightly.

    The Shave

    After all this, you should have a great edge. Give it a test shave and compare it to your pro honed blade.

    While honing, you'll likely get frustrated, but keep at it! If you're getting aggressive with the razor, just give it a break, and come back later. If the shave is no good, post back here and we'll help you diagnose.


    Some thoughts:

    I tired to present information that's very searchable. Straight razor place has archived many of the ideas that I just presented. I highly recommend researching on your own and reaching a personal conclusion. What follows are my personal opinions.

    This equipment I suggest is not necessarily the best, nor is it bad at all. It's great way to get started and find out what you like in a stone/routine. Some ideas to consider if you upgrade your set:

  • Try a natural stone for a finisher. I use a vintage Thuringian hone called an Barber's Delight Escher.
  • Upgrade your progression by adding various in-between grits. I really like going from a Chosera 1K, to Shapton Pro (not glass version) 2K, 5K, 8K, 15K, then finish.
  • Try finishing a blade with a pasted strop, and try without. Some love one over the other.

    The back and forth honing I recommend is a honing series called pyramid honing, where you go between two different grit hones to ensure you don't form a wire edge or a bur. I like to recommend this for folks getting into honing since this is one of the most documented methods for get a razor to shave ready from a bevel set. A quick google search on pyramid honing will give you plenty of reading. I don't hone this way any more.

    I highly recommend honing your razor as sharp as possible on one stone, strop as I've outlined, and give it a shave. For example, sharpen as much as you can at the 4K stage, and strop it 200 times. If it shaves ok, you're on the right track. If not, you've got more work to do at that level of stone. You'll be amazed that such a low grit can shave so well. If it's painful to shave after your lowest stone.... you're not done, and moving up the stones will not benefit your edge. Repeating this process of shaving up all the stone grits (4K, 8K, 12K) will help you get a feel for what honing at the different levels provide. Shaving off my 1K bevel provided me the biggest leap in edge quality while learning.

    Don't limit your techniques. Once you can confidently bring a restored razor to shave with consistency, I'd recommend playing around and experimenting. Though this, I've developed some strokes that are critical to my routine, and used effectively with every blade I sharpen.

u/ReMeDyIII · 10 pointsr/mtgfinance

Buy a Jeweler's Loupe btw. They're cheap. This is the one I use:
https://www.amazon.com/gp/product/B015VGEBS4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/Glaroon · 9 pointsr/magicTCG

Just spend $3 on a jewelers loupe and keep it with your stuff. It costs less than a booster pack, and will actually show you if a card is fake, vs all the guesswork methods out there

http://www.amazon.com/Illuminated-Jewelers-Loupe-40x-25mm-Lighting/dp/B007GJJRZC/ref=sr_1_1?ie=UTF8&qid=1427823510&sr=8-1&keywords=jewelers+loupe

40x illuminated loupe for $3 with free shipping.

u/JelloLegs · 9 pointsr/mtgfinance

DREAME 30X 60X LED Lighted Illuminated Jewelers Eye Loupe Jewelry Magnifier for Gems Jewelry Rocks Stamps Coins Watches Hobbies Antiques Models Photos https://www.amazon.com/dp/B01DWG89KQ?ref=yo_pop_ma_swf

That’s the one I use. Works perfectly, is super affordable, and has saved me twice already.

u/NET_1 · 8 pointsr/mtgfinance

A jeweler's loupe works just fine, too. I utilize this one from Amazon and cross-reference cards of the same color/set to check for fakes.

u/Astral_Sight · 7 pointsr/magicTCG

I purchased a Jeweler's Loupe after reading about identifying legit vs. counterfeit cards. There was an image and link in r/MagicTCG a while ago showing what a legit Mythic symbol looked like through one of these Loupes. It was pretty cool. I'll see if I can find the link.

u/benry87 · 7 pointsr/bootlegmtg

https://www.youtube.com/watch?v=etY_v7A3P2k

​

Please, for your sanity, watch this video. It gives multiple tests that will help you better distinguish between real and fake cards.

​

https://www.amazon.com/gp/product/B00K0BGNNC/ref=ppx_yo_dt_b_asin_title_o02__o00_s00?ie=UTF8&psc=1

​

Buy this or an equivalent. For ~$10 you'll save yourself a lot of grief and heartache.

u/asciiaardvark · 7 pointsr/fountainpens

heh, diving right in then?

  • tines are about 0.08mm apart. Various vendors sell brass sheets, or you can use a feeler-guage. The Pilot Parallel comes with a mylar sheet for flossing tines. I don't actually use this often, but I usually use nice paper that doesn't shed fiber.
  • magnifier - I like 30x with LED, and use it all the time to check tine alignment, for modifying feeds, etc.
  • sand paper - woah there. Unless you're grinding nibs you'll want micromesh to do smoothing. I like feedback, but if you want glassy-smooth you can use mylar to put a super-polish on. 12,000 micromesh is probably all you need.
u/anneoneemouse · 6 pointsr/fountainpens

I bought a 30x jeweler's loupe off of Amazon for less than $6.

https://www.amazon.com/gp/product/B008BXQVO2/ref=od_aui_detailpages00?ie=UTF8&psc=1

I use this to check to see if the nib is out of whack.

u/kryptikguy · 6 pointsr/fountainpens

Get a Belomo 10x from Amazon for $32. I’ve got a 10x and a 20x, the 10x is more than perfect.

u/kkinderen · 5 pointsr/fountainpens

Here's what's in my toolkit...

Polishing cloth

Fine Mesh Pads

20x Loupe

10x Loupe

! Canned Air

Cotton Tipped Applicators

Goulet Mylar Paper

Goulet Brass Sheets

Goulet Grip

Goulet Silicone Grease

! Careful with the canned air. It can be the cause of some funny and not so funny accidents.

A bright desk light with a magnifier comes in handy.

u/stldanceartist · 5 pointsr/coins

Books: This is what I said when replying to another thread for book recommendations. I love the CherryPicker's Guide - these will pay for themselves over and over. I don't personally recommend Striking it Rich, but to each their own. I'd rather see you "creep" a coin forum where die varieties and mint errors are discussed and new finds shared than spend a ton on books right out of the gate. I might also recommend learning about the entire minting process (I think a book called From Mine to Mint?) - this will help you understand how die varieties and mint errors are created in the first place and eliminate the confusion between a true doubled die and something like strike doubling.

​

Bookmarks: John Wexler has a very useful site called doubleddie.com with lots of images and descriptions of die varieties. CONECA has a Master Listing of all known die varieties for US Coins and a forum (that, honestly, I rarely visit because no one ever replies to my posts there.) These are just a couple examples; there are tons of great websites out there for you to reference (even PCGS and NGC have some nice high-quality images of varieties they attribute, which also can be very helpful when determining value.) Start building your set of web bookmarks and it will make things easier for you in the long run. PCGS Photograde is a free online reference to help you learn how to grade US Coins, for example.

​

Loupe: I'm always happy to recommend the BelOMO 10x Triplet Loupe - it's the loupe I've been using for about a decade now. IMO 10x is large enough to see even tiny varieties, and you'll mostly be concerned with the quality of the glass and metal. Lots of those cheap plastic loupes say they are higher magnifications, but aren't, or the "glass" isn't even glass (let alone high-quality glass.) I like the shape of the loupe and the texture of it - if your hands get sweaty, it won't slip out (like the cheaper chrome-plated examples you find at every coin shop.) You really, really want good quality glass here - save your eyes - and the better quality glass and larger field of vision (wider glass) the easier it will be on you. Cheap loupes make it hard to focus properly.

​

Magnet: Get yourself a decently strong magnet - this will help diagnose some bad counterfeits out there. I think I got mine at a local hardware store. I'm always amazed when a coin shop doesn't USE the magnet and buys a bunch of fakes...like, did we forget how to deal coins today or something?

​

Scale: I have been using an AWS SC-2kg scale for a few years now with decent results. My older version doesn't have an AC Adapter (just battery operated.) This will also help you diagnose counterfeits and other various mint errors.

​

Lamps: IKEA sells their Jansjo gooseneck LED lamps for less than ten bucks. They have a few different styles of these including some with clamps. They will be bright enough for variety hunting and if you get a few of them can be useful in coin imaging.

​

I tried to use gloves, I really did. But when you drop half the coins because the cotton is too slippery, it's best to learn how to properly hold a coin in your hand. I bought a really nice set of coin tongs in person at a coin shop somewhere - can't remember where - but they are sold on Amazon and eBay now. The problem with them, though, is that the company is in Germany and the shipping is more than the cost of the item.

​

I'd start learning how to image your coins as you look for varieties and errors. If you can take a good image of a die variety, chances are someone will be able to help you attribute it. I've never had good luck with the cheapo LED USB microscopes that are available, they all take crappy images, don't work with my computer, etc. I've returned every one. This could be an entire other discussion, honestly.

​

I love using my tablet (I maxed out with an iPad Pro a couple years ago) for reference books and cherrypicking on eBay. It's wonderful to have a ton of reference books/manuals/coin images handy and portable.

​

Other than that - best of luck to you, and we'll do our best to help. Just remember at the beginning to take a breath before you get all amped up and start thinking you've found a valuable variety on every coin you see. I've seen it so many times - new person shows up, posts thirty threads about thirty different coins, none of which have usable images (all out of focus for example) and then gets butt hurt when people tell them their coins are worth face value.

​

Don't take it personally.

​

It takes time and persistence to learn how to find real varieties. THEY ARE OUT THERE, though...I just found a nice 1934 DDO Quarter in a bag someone told me fifty times had been searched and searched (he's just that kind of a person, though, so I just ignored him.)

​

u/LabManiac · 5 pointsr/magicTCG

These cheap "jeweler's loupes" on amazon do the trick usually. They claim up to 60x or something, I don't really believe that, but they work. You really don't need much.

I have one like this https://www.amazon.com/Bluedot-Trading-jewelers-loop-60x-Jewelers-Magnification/dp/B00MMP6YJW/ref=zg_bs_8090802011_34/131-9874862-0971406?_encoding=UTF8&psc=1&refRID=KZZ0NZVTM7TRMRNBQ9E2 (mine has some different brand but they're from the same factory anyway I'm sure) but I've seen various others from just searching "jewelers loupe" on amazon used and they all worked fine.
With how cheap they are it's also no big risk.

u/awesometacos900 · 4 pointsr/microgrowery

Like Mr fluffy said, 4-5 more weeks.

Those buds look like they aren't even done growing. They'll chunk up quite a bit more and then the calyxs will finally swell.

Invest in a loupe and check your trichs, it's the only accurate means of checking, and a vital part of your grow.

https://www.amazon.com/gp/aw/d/B0052G7EX8/ref=pd_aw_sim_60_of_20?ie=UTF8&psc=1&refRID=KZYZZSDXCM64DS342HYP

u/weedconnoiseur · 4 pointsr/trees

Look through a jeweler's loupe or equivalent and look at the trichomes to look at when to harvest for your desired effect :-) check /r/microgrowery for more tips if google fails.

u/BlxckTxpes · 4 pointsr/outdoorgrowing

Pistils have nothing to do with time frame. You need a loupe. To check the tiny little “diamonds” on the buds. (Not on the sugar leaves)

Some people like to look at pistils, but really the best way to judge is by looking at trichomes. You’re going to want more cloudy, less amber(I wouldn’t do no amber. It’s better to have some amber rather than more clear.)

If you don’t have a loupe I would recommend buying one. It’s like 10-15$ on amazon. one I use, nothing fancy

Edit: from the photo you recently posted, you look like you have a ways to go!

u/melliott2811 · 4 pointsr/EDH

Do you have a proper jeweler's loupe? As far as I know, most fake don't even pass the light test let alone pass the loupe check on the green dot on the back of the card.

EDIT: Good, inexpensive loupe: https://www.amazon.com/gp/product/B078N34WZR

u/shamelessjames · 3 pointsr/electronic_cigarette

SE - Loupe Set - Dual 10x+20x, 10x, 30x, 3 Pc - MJ361830C https://www.amazon.com/dp/B001C9LG60/ref=cm_sw_r_awd_7l-IwbFE08DGC

u/chromic · 3 pointsr/magicTCG

Best $5 trade insurance ever.

I got this one. Construction is a bit shitty and the battery sometimes need a bit of jiggling, but having a LED is very nice and it works perfectly:
http://www.amazon.com/SE-MJ362242L-Power-Illuminated-Jewelers/dp/B003MCHXT4/ref=sr_1_2?ie=UTF8&qid=1368053581&sr=8-2&keywords=loupe

u/k_omega · 3 pointsr/MTGLegacy

I've used this one for three years and really like it. It's small, cheap, and has good magnification. It also comes with batteries for the built-in light.

u/USCoinGuysBen · 3 pointsr/USCoinGuys

I got mine on amazon too for around $2.5 with free shipping

https://www.amazon.com/gp/aw/d/B007GJJRZC/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1

It's probably not really 40x, but it definitely is better than when I was trying to details with my eyes alone. I got lasik, but it didn't make my vision THAT good haha

u/Chalcophile · 3 pointsr/geology

The cheaper ones I've used seem to distort more near the edges of the lens and just feel cheap. I've done my fair share of core logging and the Belomo is my go to and is popular with loggers I've worked with (who use their lenses ALOT). It has a bigger lens than the Bausch and Lomb and is reasonably cheap. I also have a Bausch and Lomb and it's a fine handlens

u/prince_oysterdate · 3 pointsr/Watches

I like this one. Compact and easy to use. No problem looking at watches, dials, movements, jewelry, or anything else up close.

u/cobrajet04 · 3 pointsr/microgrowery

Most of them come in a 30x and 60x combo for like $8 on amazon.

This is the one I have

Beemoon Jewelry Magnifier, 30 X 60X Illuminated Jewelry Loupe for Gems Jewelry Rocks Stamps Coins Watches Antiques Models Photos https://www.amazon.com/dp/B00K0BGNNC/ref=cm_sw_r_cp_apa_i_y-VRCbC1F1RKM

u/tbest3 · 3 pointsr/microgrowery

Nutes: https://www.amazon.com/gp/aw/d/B006XTQGLO?psc=1&ref=yo_pop_mb_pd_t2

Few packages of these to hang lights and filter:
https://www.amazon.com/gp/aw/d/B010DD743O?psc=1&ref=yo_pop_mb_pd_t2

Extension cords
Plenty of options

Lights
https://www.amazon.com/gp/aw/d/B01B4GQ6MO?psc=1&ref=yo_pop_mb_pd_t2

Fabric pots:
https://www.amazon.com/gp/aw/d/B00TF9E6XE?psc=1&ref=yo_pop_mb_pd_t2

Air control
https://www.amazon.com/gp/aw/d/B01H1R0K68?psc=1&ref=yo_pop_mb_pd_t2

Fans
https://www.amazon.com/gp/aw/d/B001R1RXUG/ref=yo_ii_img?ie=UTF8&psc=1

Outlet timer:
https://www.amazon.com/gp/aw/d/B06XC7GTCN/ref=yo_ii_img?ie=UTF8&psc=1

Tent https://www.amazon.com/gp/aw/d/B01731MNJE/ref=yo_ii_img?ie=UTF8&psc=1

Carbon filter
https://www.amazon.com/gp/aw/d/B01CJ5D4AG/ref=yo_ii_img?ie=UTF8&psc=1

4 inch duct
Can find anywhere

Jewelers loop (super important)
https://www.amazon.com/gp/aw/d/B00K0BGNNC?psc=1&ref=yo_pop_mb_pd_t2

To dry your buds
https://www.amazon.com/gp/aw/d/B01GXHQIKO?psc=1&ref=yo_pop_mb_pd_t2

Surge protectors and ext cords
Find anywhere

Inline fans
https://www.amazon.com/gp/aw/d/B01M7S46YZ?psc=1&ref=yo_pop_mb_pd_t2

Soil probe

https://www.amazon.com/gp/aw/d/B017GQ9VVY/ref=yo_ii_img?ie=UTF8&psc=1

A few other things I got locally from grow shops. Quality seeds are important. Greenpointseeds.com is always having bomb sales, ship from Colorado, and are top quality. Soil from local grow shops but can also buy from online. I went cheaper on light, but I wouldn't do that again. Get good quality lights.


u/SurpriseOcelot · 3 pointsr/microgrowery

Here is the link to the Canadian Amazon, same thing but skips the duty and import fees.

u/veni_vidi_vale · 3 pointsr/headphones

IMO the trick is to find a felt where the fibers arent too tight, but not open weave either.

Now this story will probably reveal me for the geek I am but whatever - I spent some time at a Michaels with one of these looking at the architecture of different felt and foam sheets. There was a typical Michaels sales person (if you have ever been to the store, you know the type) who spent about 5 minutes staring at me with increasing curiosity and concern until she could no longer control herself - she came up to me and in an agitated whisper said "WTF are you doing?"

I tried to explain but it was no use, it was obvious that she thought I was a complete asshat :-)

u/ClosetCaseGrowSpace · 3 pointsr/microgrowery

Learn in stages. Right now you need to figure out how big you want to go, and pick out your three fundamental pieces of equipment. Tent, light and blower/filter. First you pick out a tent. Common tent sizes are 2x2, 2x4, 3x3 or 4x4. They will get you around 4oz, 8oz, 8oz, or 16 oz per grow. They will require around 150w, 300w, 300w, or 600w of quality light. Quantum board lights from alibaba.com are an excellent affordable option, but you need to be comfortable ordering from China and putting it together. 315w or 630w CMH lighting is a very good option if you want plug-and-play. CMH runs a little warmer than quantum boards, and fits best in a tall tent. This Active Air 6" is a great blower/filter for a medium-large tent. You can use the 4" version for a small-medium tent.

u/Biscuit_of_Doom · 3 pointsr/magicTCG

DREAME 30X 60X LED Lighted Illuminated Jewelers Eye Loupe Jewelry Magnifier for Gems Jewelry Rocks Stamps Coins Watches Hobbies Antiques Models Photos https://www.amazon.com/dp/B01DWG89KQ/ref=cm_sw_r_cp_apa_n4KFyb8GRG988

I use a similar one. It's good enough to verify rosette pattern, clean black ink lines, blue paper layer, and the LEDs are strong enough for light tests.

u/MrRebs · 3 pointsr/microgrowery

Got the same one. Then got this DREAME 30X 60X LED Lighted Illuminated Jewelers Eye Loupe https://www.amazon.com/dp/B01DWG89KQ/ref=cm_sw_r_cp_apa_jo8uzb28VTH2J makes looking at trichomes very easy.
You can also just take a pinch from your bud and put it on a dish or table then use the one you have.

u/randomgroceryclerk · 3 pointsr/fakeid

I got this one

Would have been more helpful providing a pic of in use...oh wait, try these.

u/strandedonearth74055 · 3 pointsr/Autoflowers

2-3 probably, just depends on how you want your trichomes clear/cloudy/amber. She should continue to get fat, mine our. I've bought several different microscopes and this is my favorite

https://www.amazon.com/dp/B074SJJM32/ref=cm_sw_r_other_apa_JPh7BbW036QNH

u/tiny_saint · 3 pointsr/microgrowery

It is hard for me to tell from this picture. But I can see your plant is very healthy at this late stage, so you have little to lose by erring on the side of waiting another week or more. Of course I agree with those who said to use the trichomes as your guide as soon as you are able.

This little guy works really well and is only $8.99:

https://www.amazon.com/gp/product/B078N34WZR/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

u/Wellwellwall · 2 pointsr/microgrowery

I dealt with spider mites not too long ago.

Buy Diatomaceous Earth and sprinkle it around the base of your plant. Buy Neem Oil, insecticidal soap, and an insecticide like Captain Jack's Dead Bug Brew that uses Spinosad. Every 3 days, spray the tops AND bottoms of every leaf with one of these, using a different spray each time. Continue this for 5 weeks after you don't see anymore mites.

I might be an idiot for this, but I sprinkled some DE into a fan and blasted it all over my tent. Stupid or not, I didn't see a single mite for the rest of the grow after that combined with releasing predatory mites.

This might cost you 50 bucks or so, but it's worth it to knock them out now and not risk them returning or wiping out your plants.

If you wanna get a better look at the mites, you can buy a macro lens for your phone here. You could also buy a jeweler's loupe here.

u/jonny_goblin · 2 pointsr/microgrowery

the one i got from amazon works well.

u/mrmojorisingi · 2 pointsr/fountainpens

Don't use micromesh--your nib tipping is probably just fine, but the tines are out of alignment. I just bought this loupe (with Amazon Prime). Use that to look at the tines and use light finger pressure to adjust them until they are even. It's a good tool to have around anyway for general fountain pen maintenance, especially when you buy vintage pens that need some work.

u/leKreeg · 2 pointsr/microgrowery

In my experience those two finger turning adjustable types are garbage. They never last for very long and are dificult to manage.

I purchased these two years ago and it's all I've eve used.

[1] (https://www.amazon.com/KINGMAS-Pocket-Microscope-Jeweler-Magnifier/dp/B00AQAANDS/ref=pd_sim_200_2?_encoding=UTF8&psc=1&refRID=KEDEDRG711YM9A2DM25Y) 60x LED and adjustable. Is great for looking at trichomes.

2 40x fixed. Is great for everything else when you don't need to get as up close and personal.

u/BaneWayne · 2 pointsr/battlekits

I'm gonna copy a comment I made over on trees... Short answer is a container of steel screens in the top left and a jewelers loupe in the bottom right.

Everything is all labeled out here

I bought my grinder on [amazon for $7] (https://www.amazon.com/dp/B0023X32MA/ref=cm_sw_r_awd_KRYRub1MSFKSW). It works awesome.

I also got the screens (100) on [amazon] (https://www.amazon.com/dp/B007BQTC5U/ref=cm_sw_r_awd_tTYRub0BVP71J) for $4.

The empty green travel container is what I put a bit in if I'm heading over to a friends for the night. That and the two clear ones are from my recreational shop (WAent).

I don't use the normal sized lighters much, usually I choose the mini lighters.

I bought both the [zig zag roller] (https://www.amazon.com/dp/B002Q7WRDI/ref=cm_sw_r_awd_xUYRub0X73KSK) and the [blackberry juicy jay's] (https://www.amazon.com/dp/B00ESM6AMI/ref=cm_sw_r_awd_bXYRub1X7WAV1) at my smoke shop for $5 and $2 respectively.

My friend gave me the big old nug the other day so I just stashed it in here so I didn't mix strains.

The tweezers is for "handling" the nugs to put them in the grinder. I don't want to lose ANY crystals.

Burn gel (lidocane) because I'm clumsy as FUCK when I'm at a [6+].

Eye drops for dry eyes.

Hand sanitizer because I get stamped ash all over my hands from the way I hold my lighter.

Doob toob for obvious reasons. It's from a disposable e-cig from before I quit smoking.

I got the rainbow storage tube from the dollar store. I keep stems and glass screens in it. Sometimes I keep a few grams in it too if I have more than one strain.

Watermelon gum because it is my favorite taste when I'm high. Tic-tacs to take a minty toke. Emergency kit Kat for reasons.

A 30x21mm jeweler's loupe to look [closely] (http://imgur.com/f2knddq) at my [weed] (http://imgur.com/QRjZVc8)...and maybe [doritos] (http://imgur.com/BOS4v4t).

Edit: here is the link for the [jeweler's loupe] (http://www.amazon.com/dp/B008BXQVO2/ref=cm_sw_r_udp_awd_BxZRub1S2EF44).

u/bimboozled · 2 pointsr/fakeid

already have uv light, is this a good enough loupe?

u/cda555 · 2 pointsr/EDC

I've been thinking about picking THIS one up. It is really well received in the watch collecting community. I love the little leather pouch on yours.

u/sockalicious · 2 pointsr/coins

I've been very happy with this. I'd steer you away from cheaper loupes.

u/madcap76 · 2 pointsr/Silverbugs

I will second the 10x Belomo, although the price is closer to $30-35. The loupe feels very sturdy and has a much larger lens than the Bausch and Lomb. Belomo recommends you purchase through an authorized dealer but the page seems outdated. It appears the authorized Amazon seller ToysNGames (who I purchased mine from) is now called River Colony Trading.

I see above you are considering 30-60x magnification... Depending on what you want to use it for that may be overkill. A 10x is entirely sufficient for grading, determining varieties and counterfeit detection for most collectors.

u/LegitimateSpot · 2 pointsr/microgrowery

Hey I just read a comment the other day about how a quality 10x loupe is better than anything else and all you'll ever need, so I gave it a shot.

At first I was using this and it was OK. The 30x lens was easiest to use but still sucked so much.

I just got this one today and I am blown away. The quality of the optics and construction is unbelievable. I can't wait to look at trichs with it. Definitely invest in a good lens.

u/s0nicattack · 2 pointsr/mtgfinance

I see 60x loupes with LED light mentioned in this thread as well as a few others very recently. Awhile back someone linked to a Belomo on Amazon, which I bought. The Belomo is a 10x

https://www.amazon.com/gp/product/B00EXPWU8S/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Was this purchase made in error and I should make it a point to get the higher magnification loupe with LED? Or can I make things work with this loupe and my own separate LED?

u/Thelight413 · 2 pointsr/microgrowery

It's hard to tell through a picture since we don't know the strain..If you know the strain, look it up and see what it generally flowers for.
To be certain of when your plant is finishing, I highly suggest getting a Jewelers Loupe, Kinda like a magnifying glass, will allow you to see the trichomes go from clear to cloudy to amber.
https://www.amazon.com/Illuminated-Jewelers-Magnifier-Magnifying-Lighting/dp/B00K0BGNNC/ref=sr_1_3?s=arts-crafts&ie=UTF8&qid=1510069533&sr=1-3&keywords=jewelers+loupe+100x

u/Remedy1987 · 2 pointsr/microgrowery

When i was in the market for one, and not willing to spend a shit ton on it, most forums/people told me to got for this

u/Derb98 · 2 pointsr/microgrowery

Like Supremecowboy said, perhaps some nutrient issues, and probably a couple weeks left (2 at most, based on pic, but we need more info).

Got a nice fade going on with the leaves, but the buds look as if they have stalled - they tend to get fatter/taller during flower, but this could be related to the strain itself.

Hard to tell with this kind of picture. One glaring "issue" is that we see no trichs/crystals on the base of the leaves close to the bud..

What're the specs? Days flowering, nutes, light, etc

The only way to tell if she's ready is by looking closely (get a loupe ) at the trichs.

Looks tasty no matter what, tho!

u/grundlesweat · 2 pointsr/microgrowery

This one. To take these photos, i align the 30x with my camera lens and use one of these chip clip things to hold it in place

u/Henchman_twenty-four · 2 pointsr/microgrowery

FWIW, I bought this one below and it works pretty well - it has a LED that really helps illuminate the trichs. I tried one that clips onto the phone lens but couldnt' get a good pic and returned it.

https://www.amazon.com/gp/product/B00K0BGNNC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/tootsmagoopdx · 2 pointsr/microgrowery

I bought one of the USB ones with a stand that does photos and videos and I think it's worthless for trying to look at the live plant. Trying to hold the camera still, the plant still, adjust the focus and look at your laptop screen and capture a photo... a lot to do at once. Plus the photos are potato quality.

I got this loupe and it works great.

http://www.amazon.com/gp/product/B00K0BGNNC?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

u/ObligateHalophile · 2 pointsr/Autoflowers

In my noob grower's opinion, looks like it could possibly fill out a bit more... maybe keep feeding over the next week and then flush to completion?

Most importantly invest in a loupe to take out a lot of the guess work. Here is the cheapest I could find, that still has both 30 and 60x magnification! KINGMAS Jewelry Loupe 2-Lens 30x 60x Jewelers Eye Loupes Magnifier LED Illuminated Magnifying https://www.amazon.com/dp/B00KMSE100/ref=cm_sw_r_cp_apap_DsN1MbbVvz3T8

u/thephalanx420 · 2 pointsr/canadagrows

I use the same one - it's also very easy to hold against your phone's camera and take pictures with.

Same one but a couple bucks more because Prime: https://www.amazon.ca/gp/product/B00MMP6VRW/ref=ox_sc_act_title_1?smid=A3DWYIK6Y9EEQB&psc=1

u/Sad_Vorthos · 2 pointsr/magicTCG

This one seems good but I'm not sure if the blacklight is strong/large enough. I want to illuminate a whole card. Also it seems bulky / awkward to use.

also I am not sure if 60x zoom is too much or not

I wanted to ask for advice in a store in person

u/Tuck_de_Fuck · 2 pointsr/coins

Most coin collectors I know use a loupe. Here is a very affordable one that lights up and is 40x magnification. It's the same type and specifics that I use, just a different brand.

u/gyrinophilus · 2 pointsr/herpetology

You might consider a folding hand lens.. Very cheap and useful for looking at little details (e.g. head scales) in all sorts of critters and other nature nuggets.

u/LeeSalt · 2 pointsr/mtgfinance

I highly recommend this one-piece style of loupe for cards: https://www.amazon.com/Fancii-Illuminated-Jewelers-Magnifier-Triplet/dp/B015VGEBS4

You just set it on top of the card and look, you don't have to hold anything or adjust the distance, it's already pre-calibrated and the light works better than the fold out or pop out kinds of loupes.

u/mtgvintagecrack · 2 pointsr/mtgfinance

I use this one. I haven't experimented with different magnifications, but 30x seemed fine. As another use pointed out above, you might want a cheap USB microscope instead

u/Antsy27 · 2 pointsr/fountainpens

I got this one for about $10 https://www.amazon.com/Lighted-Illuminated-Jewelers-Magnifier-Antiques/dp/B01DWG89KQ/ref=sr_1_3?ie=UTF8&qid=1504493035&sr=8-3&keywords=loupe and it works great, I prefer it to the Goulet type, which doesn't enlarge enough for me. I haven't tried one that fits on your head. The loupe enlarges the view so much and has such a small, shallow focal area that it would be hard to keep anything in focus while you were actually working on it. That really isn't a problem though - you make a tiny adjustment, check it, make another tiny adjustment, etc.

u/DabsnFrags · 2 pointsr/GrowingMarijuana

This is the one i got in case you did get one that doesnt work 😔


Happy Hydro - LED Loupe - 30x & 60x Magnifying Lens - Includes Batteries & Carrying Case https://www.amazon.ca/dp/B01M8MDTAN/ref=cm_sw_r_cp_apa_i_otQDDbTHKYA0R

u/atrevely · 2 pointsr/mtgfinance

Just got this one in the mail, has 30x and 60x. Comes with two of them, so maybe buy with a buddy? Has bright LEDs on each magnifier. Pretty solid overall, definitely recommend.

https://www.amazon.com/gp/product/B074SJJM32/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

u/arth365 · 2 pointsr/NoTillGrowery

Also if you can purchase this for nine bucks.

https://www.amazon.com/JARLINK-Illuminated-Jewelers-Magnifier-Foldable/dp/B078N34WZR

This will tell you for sure if you have a mite problem.

I was looking at the photo more and Some of the white specs look like you dropped some kind of white dust or something on them so in the picture I can have no way of telling whether this is mites or not but if you purchase this microscope and look on under the leaves you will see them

u/ddumbly · 2 pointsr/microgrowery

Purchase a jeweler's loupe.

Use it to look at the individual trichomes (crystals) on the buds. They will initially be glassy clear and will look like small mushrooms. Then will begin to turn cloudy/milky as the buds mature. Then amber. When about 30-40% of the trichomes are amber, she's ready. This will give you the most potent buds and the most accurate expression of the plant.

Looking great though!

u/ufgrow · 2 pointsr/Autoflowers

From Amazon: https://www.amazon.com/dp/B078N34WZR/ref=cm_sw_r_cp_apap_taOSjJI7Urjft

This picture was taken with the 30x magnification lens on the loupe with a Pixel 3. More importantly, my OtterBox Commuter case was still on, which provides a small gap between the lens and the loupe, which takes clearer pictures.

So Pixel 3 in the case, and the lens held directly to the case, if that makes sense. Hope this helps!

u/spamzzz · 2 pointsr/Autoflowers

I just bought this one today that a fellow redditor from this sub recommended me

u/FullFrontalNoodly · 2 pointsr/knives

I'd suggest picking up one of these for $10:

https://www.amazon.com/JARLINK-Illuminated-Jewelers-Magnifier-Foldable/dp/B078N34WZR

But if you are at all serious about edge performance I would highly recommend stepping up to a USB microscope. I've got this one and I am very happy with it:

https://www.amazon.com/dp/B00XNYXQHE

but I'd be willing to bet this one is going to be more than good enough at half the price:

https://www.amazon.com/Jiusion-Magnification-Endoscope-Microscope-Compatible/dp/B06WD843ZM

And for reference here, you'll need to step up to the $150 price point to get anything appreciably better. I have yet to see any reports of anything in the $40 - $150 price range that is any better than what you can get at the $40 price point.

In my opinion, once you've spent $100 on sharpening kit you'll get far more value from one of these cheap USB microscopes than anything else you can buy.

u/August-Black · 2 pointsr/microgrowery

I got a two pack on amazon for under $10.


JARLINK 30X 60X Illuminated Jewelers Eye Loupe Magnifier, Foldable Jewelry Magnifier with Bright LED Light for Gems, Jewelry, Coins, Stamps, etc https://www.amazon.com/dp/B078N34WZR/ref=cm_sw_r_cp_api_i_TqlKDbP81PPA4

u/glytchgod · 2 pointsr/Autoflowers

I bought this loupe and use my phone’s camera:
https://www.amazon.com/dp/B078N34WZR/ref=cm_sw_r_cp_api_i_7hFRDbT12N633

u/foxytit · 1 pointr/Blind

20x?!! Are you sure she's using a true 20x loupe? If you picked up a cheap loupe online, chances are, it's not a 20x. For instance: http://www.amazon.com/SE-Loupe-LED-Illuminated-21mm/dp/B0013E3DAG => advertised to be 20x, but turns out to be ~5.5x.

I would recommend first figuring out the minimum magnification power your wife needs to read small text. Reason: There is an inverse relationship between magnification power, and depth of field and field of view. Meaning, there is no 20x magnifier that can give you a huge field of view (I have a true 20x, and dear god, it is useless to me since it can only view about 1 character at a time).

Here's an example of the tradeoff: I own several Donegan OptiVISOR headband magnifiers. At first, I ordered their most powerful model, the 3.5x. The 3.5x has a focal length of 4", and a depth of field of about 1". This means, in order for me to have a clear image of what I'm observing, I need to make sure I maintain a 3" to 5" distance between the lens and the item under observation; it was just exhausting.

After trial and error, I ended up with the the 1.75x. It has a focal length of 14", and a depth of field of about 4". Which means, I can keep the item under observation at a distance of 10" - 18", which is much more forgiving.

In case you're interested in the headband magnifier: http://www.amazon.com/Donegan-OptiVisor-Headband-Magnifier-Magnification/dp/B0068OSIIS/

u/cdcox · 1 pointr/AskSciTech

http://www.reddit.com/r/askscience/comments/e1sa0/my_kids_asked_santa_for_a_microscope_for/ Some not bad advice in that thread. Let me second a stereo-microscope. The stereomicroscope in my lab is easily my favorite to play with. I'd start by reading this

I think something like this or something like this which are, as far as I can tell, modified dermatologist scopes, might be good for a 5th grader. (Reviews are pretty good indicators on this, though don't trust zoom numbers most zoom 20-30x and the rest is all digital.) I spent a summer volunteering at a place with something like these, they are fun. Also if you want something that doesn't take pictures but is a pretty neat field scope you should check out, this, this, or this (note, jeweler loupes do not have lights built in). If you want something kind of medium range, most sites recommend Celestron scopes as pretty good. If you really want a compound microscope (and you know how to operate a microscope, I can't emphasize this enough, otherwise it will not work!) this is recommended by the microscope buying guide. (Also as someone else said, you will run out of stuff to look at pretty fast with a compound scope.) Though that site has a number of nice compound microscopes.

u/quick_q_throwaway · 1 pointr/magicTCG

i can easily see the blue line with one of these, which fit on a keychain

http://www.amazon.com/SE-Loupe-Set-Dual-10x/dp/B001C9LG60/ref=pd_sim_op_3?ie=UTF8&refRID=0P8J0B8YSF68S4GM553V

loupes also effective in seeing the blue line in a stack of 100 or so cards very quickly


u/parsing_trees · 1 pointr/microgrowery

I use one of the 30x ones from this set, you could probably find one individually for $6 or so. 30x vs. 40x or 60x may not matter much for you. They're really common and there's nothing particularly special about that set. I already had them because they're also really useful for working with tiny electronics. :) It works to hold it to the lens on my phone, too.

When I started growing cannabis I tried getting one of the adjustable hand microscopes, but I found it much harder to use that the loupes I already had unless I cut buds off the plant and held them flat.

u/HackedDigit · 1 pointr/microgrowery

Don't waste your money on those expensive magnifiers. This is really all you need. Maybe 40 or 50x but any higher will be too hard to keep stable and at this level you will be able to see all you need to.

u/hediedofbarrelfever · 1 pointr/trees

The hair method is pretty unreliable, it varies from strain to strain. Just get one of these 30x jewelers loupes and look at the heads of the trichomes. When they seem at least 50% amber, 50% cloudy is a good time to harvest.

u/dralanmage · 1 pointr/fountainpens

I have this one now to check my final work: 12X,16X Illuminated Dual Lens Jeweler"s Loupe https://www.amazon.com/dp/B003MCHXT4/ref=cm_sw_r_other_awd_P4yDwbKCJ23HD It's pretty cheap but it gets the job done. The depth of field on the smaller magnification is decent. The larger magnification has a very small depth of field but wow, you can really see small details with it.

I generally wear a headset mounted loupe while working, then check it with that. Again, I'm not a professional or anything... Just learning a dying art.

u/kitten_based_economy · 1 pointr/coins

I've got one of these guys. I primarily use the 12x lens but if I really want to get into the nitty gritty I also have the 16x. The LED lights work quite well for illumination.

u/TrollsRLifeless · 1 pointr/Drugs

Poppy seeds

A jeweler's loupe for admiring your dank weed

There are some videos on r/lsd, I think, of someone who combined these two trip toys. It ends up looking pretty cool. http://www.amazon.com/Creative-Motion-12665-1-Laser-Sphere/dp/B003150CFO // https://www.amazon.com/dp/B009S3IBI8/ref=cm_sw_r_cp_awd_jq4xwbNWTAEY9

1500 lady bugs

Edit: here's a video of those two projectors together https://youtu.be/1LSuhEAC3u0

u/MrPractical1 · 1 pointr/magicTCG

This looks right to me. The corners look more real than most of the fakes i see imo. For more information on some fakes check out my post here. It needs some damn upvotes though for awareness ha
http://www.reddit.com/r/magicTCG/comments/30a4xa/what_are_all_of_the_different_fakes_you_all_are/

but ya, definitely get a loupe like this one which also works well for the light test
http://www.amazon.com/Illuminated-Jewelers-Loupe-40x-25mm-Lighting/dp/B007GJJRZC/ref=sr_1_3?ie=UTF8&qid=1427465874&sr=8-3&keywords=jewelers+loupe+led

u/420Saint · 1 pointr/microgrowery

This 40x Loupe from Amazon does a fine job. I chose it because it had a really big lens (25mm), two bright white LED lights, and enough magnification (40x) to really see the tricones. I hold it up to my iphone camera lens and easily get enough detail to tell me everything I need to know. Oh yea, it's dirt cheap too - about two fiddy. Here is a sample image taken today.

u/stonebit · 1 pointr/coins

It's obvious once you've seen it. I have a Carson 7x loupe. Grab a flashlight and point it at the coin. Look through the loupe. If there are tons of tiny scratches in one direction, it's cleaned. If you rotate the coin and see tons of tiny scratches in the same direction while the coin is rotating, it's cleaned. Basically, if there are any micro scratches in a little cluster, clusters, or on the whole coin, is cleaned.

If you don't have a loupe, I recommend you get one. They're also good for familiarizing yourself with real coins so that you can spot fakes. I'm surprised how easy it's gotten.

I have these and really like them.

Carson LumiLoupe 7X Power Stand Magnifier With Dual Lens (LL-77) https://www.amazon.com/dp/B0010PCL5Q

BelOMO 10x Triplet Loupe Folding Magnifier https://www.amazon.com/dp/B00EXPWU8S

u/scorchingray · 1 pointr/metaldetecting

I use a magnifying loupe. No batteries required. A good one is the BelOMO. Get it at https://www.amazon.com/dp/B00EXPWU8S

u/MangyCanine · 1 pointr/Watches

I don't think a lot of people here use loupes, and there's no one brand that they use. I happen to use this 10X one. There may be cheaper/better ones, though. Also, note that this is a 10X loupe. I have a 7X one (same brand) that I like better, as it has a wider field-of-view (less magnification). However, it doesn't seem to be available any more.

u/NDRob · 1 pointr/coins

Get something between 5x and 10x. Triplets are going to be some of the nicer ones.
https://www.amazon.com/s?k=bausch+%26+lomb+triplet+loupe&ref=nb_sb_noss_2
https://www.amazon.com/BelOMO-Triplet-Loupe-Folding-Magnifier/dp/B00EXPWU8S/ref=sr_1_3?keywords=triplet+loupe&qid=1555943740&s=gateway&sr=8-3

I bought the BelOMO most recently and like it a little more because it's bigger. I had owned and lost two of the bausch & lombs before getting this one.

u/ClardicFug · 1 pointr/AskElectronics

A 10X triplet loupe is a great place to start. I use one of these though it's probably a little pricey.

Also, there's a lot of cheap USB microscopes around these days, and I've found them to be pretty useful for trace/solder inspection on fine pitch SMDs.

u/QuiteARoughCustomer · 1 pointr/fountainpens

I've had this one for about two years and it works fine. It's just a cheap Chinese loupe that probably doesn't magnify anywhere near the extent that it claims, but it does what I need.

u/SenorFluffy · 1 pointr/SpaceBuckets

I use a jeweler's loupe for magnification, specifically I bought this one:
https://smile.amazon.com/DBPOWER-Illuminated-Jewelers-Magnifier-Magnifying/dp/B00K0BGNNC/ref=sr_1_5?ie=UTF8&qid=1486750468&sr=8-5&keywords=jewelers+loop

I just put my phone camera lens on the eyepiece to take pictures, and it works pretty well. The one I linked to is nice as well since it comes with LED lights to high illuminate it, which can be really useful considering how close you have to get.

u/Niwrad0 · 1 pointr/jewelry

amazon has a great selection of loupes

https://www.amazon.com/gp/product/B00K0BGNNC/ref=oh_aui_search_asin_title?ie=UTF8&psc=1

This one has a stronger 60x magnification. I use this to confirm the laser inscription on my diamond as well as to really look at small details on the diamond

u/Donkeydonkeydonk · 1 pointr/CannabisExtracts

You could answer so many of your own questions by picking up a loupe and having a look

See heads? Good job. Don't see heads? Bad job, go back and try again.

u/yogi420 · 1 pointr/microgrowery
u/DiYRDWC · 1 pointr/microgrowery

I generally do too, I just dont paying premium price or not getting exactly what I want because its out of stock or they dont carry that exact model. The loupes I could find locally were either way less power than they were stated for, or the lense was so small it was difficult to see as much as I wanted too, more the size of the 60x lense on the one I linked.

This is the Loupe I picked up, was there in under 24 hrs, its not amazing but it does what I need it too well and the price is amazing.

https://www.amazon.ca/KINGMAS-Illuminated-Jewelers-Magnifier-Magnifying/dp/B00KMSE100/ref=mp_s_a_1_3?keywords=jewelers+loupe&qid=1564073738&s=gateway&sprefix=jewelers+&sr=8-3

u/pakaloloha · 1 pointr/microgrowery

Solid choice. Cheap too. I have this one and am blown away how good it works for the price.

u/iceman012 · 1 pointr/mtgfinance

This is the one I got, and it's served me well so far. There's probably better ones, but it should show that you definitely won't break the bank.

u/smalltimebuds · 1 pointr/canadagrows

This style is the one I have. About $10. A little tricky to get used to, but easy once you know it. I have an led on mine and that makes a big difference.

À great $10 investment.

Blue Dot Trading 2 in 1 Jewelers Loupe, 30x/60x Magnified Jewlers loupe (jewelers-loupe-30x-60x) https://www.amazon.ca/dp/B00MMP6VRW/ref=cm_sw_r_cp_api_i_DZnFDbCMBKTST

u/riko_rikochet · 1 pointr/mtgfinance

Here is the loupe I use, it has a built in light and blacklight too: https://www.amazon.com/Illuminated-Magnifier-Construction-Kare-Kind/dp/B00YBHQ7X2/ref=sr_1_6?ie=UTF8&qid=1521233001&sr=8-6&keywords=jewelers+loupe&dpID=41kfrmUFCkL&preST=_SX342_QL70_&dpSrc=srch

The cover started getting wobbly after ~2 years of use, but other than that works really well!

u/punkfreak75 · 1 pointr/microgrowery

Just for ease of access.

$10 amazon$10 amazon

u/greatfulalways · 1 pointr/ProductTesting

Free Products for Amazon Reviews. We need Reviews on some of our new products.
We have headbands, Mascara, and a new Makeup Brush Organizer, Magnifier Glasses. Great if you also do you tube videos.

http://www.amazon.com/dp/B0070YFUV8 - Eyelash Extension Mascara

http://www.amazon.com/dp/B01BTC0O44 - Circle Makeup Brush Organizer

http://www.amazon.com/dp/B01BN1OMO4 -- Square Makeup Brush Organizer

http://www.amazon.com/dp/B01C4P1NTU - -Magnifier Glasses Headband

http://www.amazon.com/dp/B01BYOKMS0 -- Headband Purple

http://www.amazon.com/dp/B01BZ907Z2 -- Headband Blue

http://www.amazon.com/dp/B01BYMQKCO --Headband- Blue Diamond

The headbands we will have to choose which one and they ae so much fun because you can wear them over 50 different styles in under 1 min. They are so easy to put in and do a style great for moms on the go students or that messy hair day now gone in just 1 min. Just twist your hair here is the You tube link to show you.
https://www.youtube.com/watch?v=akZNaDFw8i4

If you are interested and can leave a photo in your review for Amazon then please write me at:

[email protected]

u/semmem1 · 1 pointr/ProductTesting

I would love to test out and review the Magnifier Glasses Headban
http://www.amazon.com/dp/B01C4P1NTU

u/HighGuyTheShyGuy · 1 pointr/microgrowery

You should get one...

u/Streiche93 · 1 pointr/microgrowery

Sorry I didn't see your reply, I use a loupe I got from amazon and I'm pretty happy with it.

DREAME 30X 60X LED Lighted Illuminated Jewelers Eye Loupe Jewelry Magnifier for Gems Jewelry Rocks Stamps Coins Watches Hobbies Antiques Models Photos https://www.amazon.com/dp/B01DWG89KQ/ref=cm_sw_r_cp_apip_jzAkWlzFE5QCn

Those pics are taken with my iPhone 7 though the 60x magnifier.

u/Mr-PFM · 1 pointr/fountainpens

I personally use: https://www.amazon.com/DREAME-Illuminated-Jewelers-Magnifier-Antiques/dp/B01DWG89KQ/ref=sr_1_3?ie=UTF8&qid=1539801468&sr=8-3&keywords=loupe

The bigger lens is mostly useless but the smaller one lets me tell if the tines are even even slightly misaligned and if there is a sharp edge somewhere which is great. You can also watch a comparison vid here: https://www.youtube.com/watch?v=RzfHkJggT7A

u/GrowInTheDark · 1 pointr/microgrowery

yea i went from this handheld loupe to the USB scope. Glad I did, it really is more convenient imo to snap photos and record video. Even has a button on the butt of it that you tap and it snaps photos. And can be hooked up to android phones if you get an OTG adapter too

u/creeder14 · 1 pointr/fountainpens

I'd check out a TWSBI Eco. Very nice pens for about 30 euros. Order it in a fine or extra fine nib.

And yeah, you can have some problems. Bleedthrough is an issue that can be solved by using a well behaved ink. Noodler's Black or X-Feather are good inks for preventing this. Using better paper is a good solution, too, but that's more expensive. Black n Red notebooks are pretty cheap and work well. In my experience, TOPS notebooks work super well with fountain pens and are dirt cheap.

A finer nib will be slightly more feedbacky (but it shouldn't be scratchy - it shouldn't feel like it's digging into the paper). If it feels like it's digging into the paper while writing, something's wrong. Try writing figure eights, and if it feels more scratchy in one direction than another, then the tines are probably out of alignment. This is a very very easy fix. All you need to fix it is some sort of magnifier (I find that a 30x/60x jeweler's loupe from Amazon is the best tool to get a good look at the tip of your nib. If you can't afford the ten buck to get one, that's fine, use a magnifying glass or whatever you can get your hands on. Even zoom on a camera would work. If you don't have ANY of that, you can even just do trial and error.

Basically, see if the two metal tines (the two sides of the nib) are misaligned at the tip, and if one is longer than the other. A head-on view and an above view work well for this. If they're misaligned, it's an easy fix and I'll tell you how to do it. If one is too long.... that's more complicated and if that's the case, I'll tell you how to fix it then.

So: To fix misaligned tines, basically just press the one that's too low up with your thumbnail. Don't push hard, just until you feel what feels like a little bit more resistance than you'd use while writing, and then let go. Keep doing this, and check through the magnifier to see if it's aligned yet. If it is, then go ahead and try writing with it and see if it's better. If it's not aligned or not better, keep trying.

Hope this helps, ask me any questions you want! Have a great day!

u/wildwild94 · 1 pointr/microgrowery

I use this one, specifically the 30x part to see closer up and have to use my cell phone to take 60x pictures because my hands are just too shaky. I'm probably going to end up ordering the USB microscope I saw somewhere else on this thread haha

u/mewincali · 1 pointr/microgrowery

I bought a Jewelers Loupe from Amazon and held it up in front of my Google Pixel phone. It took a few pictures to get a good one, but my phone has a pretty good camera to work with. I think next time I would get something with 100x, the 60x is decent (what I used for the closer ones), but the 30x is pretty hard to tell what color the trichs are.

u/WilliamBott · 1 pointr/CRH

I use a 30x/60x loupe with LED lighting. Super cheap and does a fine job. Loupe $11 now, same as when I bought it.

For coins or anything I need a finer, more stable look at, I use a 60x-120x LED-lit microscope. Microscope $13 now, bought it for $6.60 a couple years ago.

u/noirnegasi · 1 pointr/microgrowery

loupe

Use this with my iPhone

u/hiddent69 · 1 pointr/microgrowery

This loupe is super affordable and honestly I’m a huge fan, don’t have any issues seeing tric’s with her. I’ve heard this slightly higher priced loupe ($16 usd) is a bit better but I really don’t mind my cheaper loupe one bit!

u/WhisperingPotato · 1 pointr/microgrowery

Man I wish! Just found out I should have been wearing glasses my whole life. I'm 21 and I play baseball in college 😂 I have both the usb microscope and a loupe and let me be honest, i prefer the loupe.

Happy Hydro LED Loupe 30x & 60x Magnifying Lens - Includes Batteries & Carrying Case https://www.amazon.com/dp/B01M8MDTAN/ref=cm_sw_r_cp_api_b0DKzb5F4GHBA

u/Tyme2burn · 1 pointr/cannabiscultivation

I’m using this loupe
JARLINK 30X 60X Illuminated Jewelers Eye Loupe Magnifier, Foldable Jewelry Magnifier with Bright LED Light for Gems, Jewelry, Coins, Stamps, etc https://www.amazon.com/dp/B078N34WZR/ref=cm_sw_r_cp_api_i_a9GIDbYZTHBZE

u/shnethog · 1 pointr/microgrowery

I'd get a jeweler's loupe over a microscope, I've tried both and vastly preferred the loupe. The microscope (at least the one I tried) was really finicky to get properly in focus, with the loupe you just whip it out and you're ready to go with little to no adjustment.

Here's the loupe I use:

[Jarlink 30X 60X Illuminated Jewelers Eye Loupe Magnifier, Foldable Jewelry Magnifier with Bright LED Light for Gems, Jewelry, Coins, Stamps, etc] (https://www.amazon.com/dp/B078N34WZR/ref=cm_sw_r_cp_apa_eLzMBbB47M9SY)

Edit: as a bonus, it's way easier to take pictures through the loupe than the microscope.

u/prettylights18 · 1 pointr/microgrowery

Like this?

JARLINK 30X 60X Illuminated Jewelers Eye Loupe Magnifier, Foldable Jewelry Magnifier with Bright LED Light for Gems, Jewelry, Coins, Stamps, etc https://www.amazon.com/dp/B078N34WZR/ref=cm_sw_r_cp_apa_i_OG5JDbP0GQC6W

u/MySecretGardenIsDope · 0 pointsr/microgrowery

I thought I'd share my experience for the community, and hopefully my experiences help or encourage others to give this a shot on their own. I had absolutely no experience growing anything when I started, so if I can do it, so can anyone else!

I've got an equipment list of the stuff I'm using since it took me a long time to figure out what to buy. This doesn't include the $1.50/week for RO water from the local grocery store, the electricity, or the other stuff I ended up buying afterward for my clones.

No grow tent or ventiliation is needed for my scenario since I have full access to a basement. It's perfect since there is a water heater and a boiler in the same room so the temp is always pretty constant, there is plenty of CO2 from the gas that the appliances burn, and the humidity is also pretty constant.

A few of the mistakes I made that I'd fix next time:

  • Buying a heating mat for germination/clones. I only got 1 out of 5 seeds to germinate, and thankfully that one turned into a good plant. I think heat was where I went wrong since I also tried to do clones without a mat and none of them rooted. When using the mat I bought, I had much, much better success.

  • After transplanting my germinated seed, I let that plant go too long in a small container and it got a little root bound. Should have transplanted sooner.

  • I was in the veg stage longer than I think I needed to. Went on vacation in the middle and that screwed up my schedule a little bit, but I think I'd be better off with less veg time for the next plant

  • Buy a better pH pen. I cheaped out on that and I've never gotten it calibrated correctly, so I've been using the dropper/eye test method with the General Hydro test kit that comes with the pH Up/Down. That method seems to work just fine, but it's kind of a hassle.

    The images have some details about my grow, but I'll be happy to answer any other questions folks might have.

    Item | Cost | Product Link
    ---|---|----
    Seeds (OG Kush Feminized, 20ct) | $80 | Marijuana Seeds NL
    Coco Coir | $17 | Kempf Coco
    300W LED Lighting | $80 | GalaxyHydro
    Plastic Pot | $0 | Craigslist - Free
    Light Timers | $12 | Light Timers
    pH Tester | $18 | pH Pen
    pH Up and Down | $16 | General Hydro
    Jeweler's Loupe | $6 | Magnify Me
    Nutes | $35 | Canna Coco 1 & 2
    Perlite | $13 | Black Gold
    CalMag | $17 | Botanicare Supplement
    TOTAL | $294


    Also, THANK YOU to everyone in this sub. There is a ton of info out there about growing, but this place is the best location I found for timely info related to my new hobby.
u/Older_Man_Of_The_Sea · -6 pointsr/mtgfinance

Number 1: What is a "Crafle"?
Number 2: Make sure it is a real Crafle. There are a lot of fake Crafle's running around. It is one of the more commonly made fakes and there are numberous versions. Take the Crafle out of the sleeve and ensure that it feels like a normal card (compare it to another rare from the same set, preferably a known real Crafle, or another land). Also, use the light test, it is the easiest one to do. A jeweler's loupe or a small microscope would be good too.
Number 3: Seriously? I would trade in some goyfs for a Crafle any day of the week. Crafles are on the reserved list and will likely only go up. Goyf is practically on the "print 'til you can't cash in anymore" list.