(Part 2) Best kvm switches according to redditors
We found 636 Reddit comments discussing the best kvm switches. We ranked the 159 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
Here is what I got going on (top to bottom, left to right):
I have my monitor and keyboard sitting on a lack side table
Then on top of my lack side table on casters (I could no longer find it on ikea for the link, not sure if they stopped selling them?) I have:
an AT&T MicroCell - which is awesome since my office (and this closet) is in the basement.
NETGEAR R6250 - which is used for guest Wi-Fi access only.
ieGeek USB LVM switch (behind the NETGEAR)
CyberPower CP1500AVRLCD UPS - Which is currently supporting only my 2 R710's for battery, the rest pictured for surge protection.
Then inside the lackrack:
Cablox Mini Cord Organizers stuck to the roof for clean cable management
Dell PowerConnect 5324 - 24 Port Gigabit
Dell R710 2x Xeon L5520, 32GB RAM, 8GB thumb, 120GB Samsung SSD, 6x2TB Seagate NAS HDD
6x2TB in RaidZ2
Dell R710 2x Xeon E5530, 32GB RAM, 8GB thumb, 6x1TB Seagate Barracuda HDD
edit: listing stuffs..
FWIW, your internet not being reliable and your internal network not being reliable are two different things, you might be able to get away with a basic VNC session to the desktop, since that doesn't use the internet and your internal network should be snappy enough for this.
Or get a CAT5 VGA/USB extender, like this (you'll need a second monitor, though) - https://smile.amazon.com/StarTech-SV565UTPU-Console-Extender-500-ft/dp/B00267TXZ8?sa-no-redirect=1
There is another way to set it up if you have 4 sources. There are these cheap multi viewers on amazon that I have used the last year or so. Its a no name brand box but it is amazing. I have mine set up with my cable box, an OTA tuner, chromecast, and a PS4.
https://www.amazon.com/gp/product/B079SHZFRX/ref=oh_aui_detailpage_o00_s00?ie=UTF8&th=1
KVM
It's actually really hard to find one with two HDMI (never mind DP) outputs though. However at least one exists:
https://www.amazon.com/CKL-Monitor-Extended-Display-CKL-944HUA/dp/B07KVJ54X2/ref=sr_1_3?keywords=dual%2Bmonitor%2Bhdmi%2Bkvm&qid=1559184983&s=electronics&sr=1-3&th=1
There are a couple solutions to running video from a PC to a TV over long distance (HDMI doesn't run very far).
I used to use the Steam Link method, but it was a little too troublesome, and doesn't really work if you want to play asymmetric local multiplayer games (all controller inputs quit the steam link software), and it had a ton of trouble with audio mirroring if the headset came unplugged temporarily. I've generally found the second option to work pretty well, though. :) It uses an ethernet cable to extend HDMI and USB over 50m from your TV area to your PC
That, or a KVM switch, or you can use Looking Glass. I personally opted to use this KVM switch to get FreeSync in Windows, the one downside is that Windows really doesn't like not having any monitors plugged in and can throw a hissy fit in some edge cases.
If it has a serial header, get a backplate for it
The KBTalking Pro is still somewhat available, but not running whites. You can also get a USB to Bluetooth hub to make any keyboard wireless, which sounds like your best bet. I haven't heard if that one works well, but its Amazon page isn't that bad.
Sort of. Nulaxy had one, then IOGear, now this company sell one
> 27' 144 hz display
This is going to be a problem. KVM switches that support 144Hz pass-through are pretty damned pricey.
So the only way this could be done cheaply is if you use the multiple inputs on the monitors and then switch them over manually when you also switch over on the KVM switch.
Just wondering, would a usb-over-ethernet dongle actually give any isolation?
Something like: https://www.amazon.com/AV-Access-Extender-Operating-Synchronously/dp/B01EV33R8S
which would theoretically offer isolation over the ethernet magnetics?
/u/shiftingtech
> Don't get me wrong, I hate monopolist Microsoft and Windows 10's Freemium
What does this even mean though?
> even the occasional reboot to switch between OSes for a game is something my lazy ass would rather not do unless security demands it
Rebooting into multiple systems is a pain in the ass. I use a KVM to switch between systems (https://www.amazon.com/gp/product/B01AH0BMPO/). It's super convenient (only downside with this model is that it doesn't do USB3).
PS/2 keyboard and mouse to USB adapter?
You need this thing usually. I wouldn't call it a jumper though. You may have to turn it on in the BIOS too.
I have a gaming machine a work laptop and a media server all connected to my 34” Alienware using this KVM.
https://www.amazon.com/dp/B078KG5N2Q/
The drawbacks are it doesn’t support my gaming mouse, so I keep a basic mouse for the KVM and leave my gaming mouse plugged in to my gaming pc. Also I can’t get GSync using HDMI. So when I switch between gaming and the other computers I have to change the monitor input. But it is still faster than swapping any wires and a lot cheaper than a gsync compatible DisplayPort kvm.
At least one person reported that this kvm does what you're looking for IOGEAR 2-Port DisplayPort KVM -GCS62DP https://www.amazon.com/dp/B01BSNSOPU/ref=cm_sw_r_cp_tai_3nCmyb8DAC4BM
You want a multi monitor kvm. How many monitors do you need? What type of connection? Looks like you want 4 ports.
Try getting one of these https://www.amazon.com/gp/aw/d/B002RCTNKW/ref=mp_s_a_1_3?ie=UTF8&qid=1494899122&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=kvm+dvi+4+port+switch&dpPl=1&dpID=41GJjaVQtGL&ref=plSrch
And one of these https://www.amazon.com/Plugable-Graphics-Multiple-2048x1152-1920x1080/dp/B00A2E1MQA
Plug the displaylink into the extra port on the back of kvm. This should get you dual monitors. If you're lucky, you could plug a second into the front for triple monitors, but remember you're pulling them through a single usb port.
We've been using this IOGEAR 4-Port DVI KVMP Switch with Audio and Cables for about 5 years and we haven't had any problems with it. We have hundreds of Dell DisplayPort to DVI adapters, so we pulled 4 that are always connected to the KVM.
Just to clarify,
You're looking to use one set of keyboard and mouse for two laptops.
Like you sort of mentioned about, you aren't looking for a docking station but a KVM.
Here's a two channel HDMI.
https://www.amazon.com/JideTech-Peripheral-Sharing-Support-Resolution/dp/B07QM6ND7R/ref=sr_1_4?keywords=two+computer+kvm&qid=1574806469&smid=A1DL8MO0B89SKG&sr=8-4
Since you are setting the laptops up on their own displays you don't need to plug in the HDMI
It has an HDMI in, and a USB hub. It'll work with anything that outputs HDMI and can connect to a USB hub.
Does your Nexus (which model?) have HDMI out? A Nexus phone may require a SlimPort adapter to get HDMI out. I don't know if you can split your Nexus microUSB into HDMI & USB or not. If not, the only way I can think of using the keyboard & touchpad would be by adding a USB/Bluetooth adapter of some sort--an Aten tap or IOGEAR Keyshair or something.
I have used it with a Sero 7 Pro, which is very similar to the 2012 Nexus 7 tablet, with the addition of an HDMI port.
Ipad Air works with:
Leopold FC660C without a USB HUB (only requires Lightning --> CCK cable)
HHKB Pro 2! - I use an Aten Tap USB to Bluetooth Switch with a Power Bank:
http://imgur.com/a/5jBYD
http://www.amazon.com/Aten-Technologies-Bluetooth-Switch-CS533/dp/B0094FN81K
Switching over one of the displays is trivial. You get something called a KVM and connect it to both computers and one display (+mouse and keyboard), and then switch with a button. This one is very similar to the one I use with my very similar setup:
https://www.amazon.com/CS782DP2Port-DisplayPort-Switch-Supported-Included/dp/B01AH0BMPO/ref=sr_1_4?ie=UTF8&qid=1539292202&sr=8-4
If you want to switch over multiple displays, it suddenly gets more complex. First up, that MBP only supports two external displays (three with the internal), so you can’t connect all of them without some sort of hack. That hack would be a DisplayPort MST hub, which might work, depending on the resolution you use? Secondly, you need a KVM that supports more than one display, and those tend to be in the Not Cheap part of the spectrum. I could see various ways of doing it with docks and video compression, but those things usually don’t work great with gaming, as they add significant lag.
What I do is use a stand for the MBP to raise it to eye height and use that as my second Mac display, and use the PC mouse and keyboard (connected to the KVM) for input. This means that the Mac gets two displays, the work laptop (on the same stand) gets two displays, and the old PC that I mostly use for gaming get only one display, the main. It works well enough for me.
if you want an easy pushbutton sort of way to do it, you'll need a dual monitor kvm (Keyboard, Video, Mouse) switch. Which switch you get depends on what types of monitor connections.
​
here's a good one for DVI:
https://smile.amazon.com/StarTech-com-SV231DDVDUA-Monitor-Switch-Audio/dp/B002VY8T2Y?ref_=fsclp_pl_dp_1&th=1
​
There are also software ways of doing it (install a program on both computers and change a setting depending on which computer you want to use at the time) but it's slow and would NOT be good for gaming. If you want to give this a shot for shits and giggles, try Synergy.
https://symless.com/synergy
This
https://www.amazon.com/dp/B0107W8UP2/ref=cm_sw_r_cp_apa_oKSlzb13Y8AEA
And this
https://www.amazon.com/dp/B01EV33R8S/ref=cm_sw_r_cp_apap_OGXWJEm5l6cLU
Are what you're after.
try a KVM switch, these typically support only 1 monitor but you can get triple head KVM if you want to spend the extra cash and your laptop\dock support multi monitors
https://www.amazon.co.uk/StarTech-com-Triple-Monitor-Switch-Audio/dp/B008CXFM96
I have never seen an USB C KVM device.
You could just switch HDMI and USB separately. This has the biggest chance of working without a hitch as there are no signals split or converted, however it requires switching twice every time and two cables plugged into each laptop.
You could use two USB C to DisplayPort adapters (preferably USB C to DP + USB A) and then a DisplayPort KVM or this one has cables built on and one MST hub to split the DP signal after switching.
The forthcoming solution works if you do not need audio.
You need something like this. It's a Dual Port, Triple Head KVM. This allows you to connect your two PCs and all three of your monitors. I would search for a different one, but this could also work.
This is something like you're looking for. Ethernet KVM extender
USB-C isn't a long-distance form factor. It's designed for adapters and dongles a couple inches away, maybe a couple feet. Not 30 feet away.
Regular USB3 doesn't have any kind of video protocol in it, and trying to run gaming output over it is an exercise in sadness.
Corning offers USB3 or Thunderbolt 2 over fibre lines, for a lot of money and mediocre reviews. Besides, USB3 (as mentioned above) won't cut it, and the other elements of a Thunderbolt 2 setup (TB2 card for host PC and dock for other end) are expensive.
Do enough looking on this and you'll likely come to the same conclusion I have: you need to put stuff over some cat6 lines. There's plenty of HDMI over cat6 boxes, and a lot of VGA+USB2 (KVM) over cat6 boxes, but neither of those are quite what you need.
A lot of searching has found me this product, which will do 1080p HDMI and USB2 over a single cat6 line. There's some other variants on that product page that will do 2160p DisplayPort over a longer distance, if that interests you.
This will get you down to two cat6 lines: one for ethernet, and one for HDMI+USB2. Getting down to a single cat6 line would mean either running HDMI and USB over IP (all the solutions for that are shit) or doing a higher-level transport (ie the Steam Link).
---
Side-note: Assuming you can do renovations to where you live, you should run some cat6 through the walls. If you (or someone you know) has basic home handiness skills and drywall repair talent, you can do it in a weekend. Otherwise, a professional A/V crew will run you $100-150 to run 4 cat6 lines from your entertainment center to your PC setup.
No it does. But I want to do something like this and split the signal so I can have my antenna and then a fire stick on the same screen.
link
Sorry for the incomplete answer. I read a lot of questions and don't spend as much time as I probably should reading them carefully.
What you can do is get a laptop dock, a USB switch (example), and two HDMI switches (example).
The HDMI switches would be optional if you're fine manually selecting inputs and I believe there are also audio switches for your speakers too.
Plug your USB devices into the USB switch and connect one output to your dock and one output to your PC. Ditto with the HDMI and audio connections. When you get home with your laptop, plug it into the dock and hit all the switches.
Looks like you might be right. I set my server up with enterprise hardware which came with graphics support without the need for a GPU or iGPU. I did some digging into the board and thought that you might be able to achieve everything through the onboard COM header and a serial connection.. I've read some advice that this won't work but I find that difficult to believe. IF you're technically minded this might be a route you could explore:
https://github.com/ynkjm/ubuntu-serial-install
https://help.ubuntu.com/community/SerialConsoleHowto
The unclear part would be how to enable serial connections in the bios without the monitor. It does seem like an easier solution to just buy a cheap GPU though.
If you were to get this working, you could install the OS, and PMS via terminal - i.e. from another computer you've connected to the headless server. You could use terminal screen or PuTTY to connect.
Try one of these KVMs from startech.
https://www.amazon.com/StarTech-com-Triple-Monitor-Switch-Audio/dp/B008CXFM96/ref=sr_1_2?ie=UTF8&qid=1492437365&sr=8-2&keywords=multi+monitor+kvm
KVM switch example on Amazon: https://www.amazon.com/StarTech-com-DisplayPort-Switch-Remote-Control/dp/B00FSARDCA/ref=sr_1_1?keywords=B00FSARDCA&qid=1571430921&sr=8-1&gclid=Cj0KCQjw0brtBRDOARIsANMDykb4eNtk5BKjjGoF8BejhTIms8Qw3-Zr3gtueqQv8K8O7LFquQ27eBYaAoFQEALw_wcB&th=1&psc=1 I didn't really look at reviews of this device, just wanted to give you the first example I could find.
Sounds like your looking for a KVM switch. Heres one from amazon they have a few options for display inputs for this one and it will support dual monitors.
Having a hard time finding a standalone DP switch and I also read some dont support heavy gpu rendering so it might not work with my gaming desktop. I think I'm going to go this route:
4k Monitor DP ---> Desktop
4k Monitor HDMI ---> Splitter --> Macbook
1440p Monitr HDMI --> Splitter --> Macbook
1440p Monitor DP --> Desktop
keyboard, mouse, headset, other usb devices --> 1-2x (maybe daisy chaining them?) USB 3.0 KVM SWITCH --> Desktop and Macbook
The only thing I would really need now is audio and ethernet switch...
I found this thing - https://www.amazon.com/StarTech-com-SV231DPDDUA2-DisplayPort-Dual-Display-Microphone/dp/B06XDRT9NX
and this - https://www.amazon.com/StarTech-com-Dual-Monitor-Docking-Station/dp/B011NLY5J6
This one I can use as a 1x usb, 1 DP and 1 HDMI monitor, and power and then add a couple usb extensions if needed?
Probably going to take my chances on https://www.amazon.com/dp/B01BSNSOPU?ref_=pe_623860_70668520_dpLink#
Wouldn’t something like this work?
You'll want something that'll switch HDMI as well, so an HDMI + USB KVM would be ideal, and maybe spend a bit more money to get a better quality product from iogear.
Tripple monitor KVM. That is what you need. Not a cheap solution!
Same thing recently happen to my gf's rather old MBP.
Does your monitor have a second input?
Or you could use a KVM switch. (example)
I don't see why you couldn't do it with HDMI and USB over Ethernet boxes.
https://www.amazon.com/Atlona-AT-UHD-EX-70-2PS-HDMI-Over-HDBaseT/dp/B015D2MBV0/ref=pd_sim_23_3?_encoding=UTF8&pd_rd_i=B015D2MBV0&pd_rd_r=KEXYX9PQ7FDQ864V9HM3&pd_rd_w=RIqtu&pd_rd_wg=fB8nB&psc=1&refRID=KEXYX9PQ7FDQ864V9HM3
https://www.amazon.com/AV-Access-Extender-Synchronous-Conference/dp/B01EV33R8S/ref=sr_1_4?ie=UTF8&qid=1479144833&sr=8-4&keywords=usb+ethernet+extender
Try something like this:
http://www.amazon.com/TRENDnet-2-Port-Switch-Includes-TK-209K/dp/B000L4D42Q/ref=pd_sim_sbs_indust_2
?
https://www.amazon.com/gp/aw/d/B073B84CY1/ref=mp_s_a_1_3?ie=UTF8&qid=1519231390&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=hdmi+kvm+extender&dpPl=1&dpID=51C0LYZUZoL&ref=plSrch
For the KVM extender. I'm not so certain it's the best option unless you NEED it to be one cable. You're not going to need cat7 if you're going that route. And probably shouldn't, it's not really standardized at this point. I don't have a link to anything I've used but it's been hit or miss every time I've needed it.
Let's go cheap though.
https://www.amazon.com/gp/aw/d/B0716WQGXS/ref=mp_s_a_1_3?ie=UTF8&qid=1519232071&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=hdmi%2Brepeater&dpPl=1&dpID=41Cjp8ODTWL&ref=plSrch&th=1&psc=1
I have it, it works perfectly as an HDMI repeater. Use it close to the computer.
https://www.amazon.com/gp/aw/d/B005T3LKKM/ref=mp_s_a_1_7?ie=UTF8&qid=1519232203&sr=8-7&pi=AC_SX236_SY340_FMwebp_QL65&keywords=3ft+hdmi+cable&dpPl=1&dpID=51GfZIPjNZL&ref=plSrch
Use this to go from computer to repeater.
https://www.amazon.com/gp/aw/d/B00FX8Q3NM/ref=mp_s_a_1_12?ie=UTF8&qid=1519232352&sr=8-12&refinements=p_72%3A2661618011&pi=AC_SX236_SY340_FMwebp_QL65&keywords=100ft+hdmi+cable+2.0
This is the exact cable I used for my setup. This should take care of the main run of HDMI. Goes from repeater to your monitor.
https://www.amazon.com/gp/aw/d/B00I0T2V6O/ref=mp_s_a_1_4?ie=UTF8&qid=1519232631&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=usb+over+ethernet&dpPl=1&dpID=41ghBtd5wgL&ref=plSrch
The usb to ethernet I have is discontinued. This looks similar but might have to shop around. You WILL need a powered USB hub at your monitor/keyboard/everything setup.
https://www.amazon.com/gp/aw/d/B01MU4TOA0/ref=mp_s_a_1_2?ie=UTF8&qid=1519232911&sr=8-2-spons&refinements=p_72%3A2661618011&pi=AC_SX236_SY340_FMwebp_QL65&keywords=cat6%2Bethernet%2Bcable%2B100%2Bft&psc=1&th=1
For your main run of USB. I have not used this cable, but I've bought from the vendor before and been satisfied.
Once again, YMMV and do not buy anything that can't be returned.
Very strange indeed!
I use this product. It sould work out-of-the-box on Windows but I can't say because I'm on Debian 9 with Linux kernel 4.11.
Hey I did this same thing with an Xbox One X. I have it way down in the basement closet, connected to a TV two floors away. You really need 2 things. And you need 2 runs of ethernet (CAT6).
First, an HDBASET Transmitter and Receiver. Its just HDMI running over ethernet. The entry level Monoprice RX/TX kits have been running perfect for me for about 5 years now. If you scour eBay, you can find cheap Atlona kits. Those are solid. 1080p. If you want 4k, you might have to dig deeper.
The second thing you want is to run USB over ethernet. This will let you run your controller WIRED. You don't have to worry about signal or distance. It's just a straight up USB controller at this point. AV Access has a kit - same idea as the HDBaseT. It's cheap too: https://www.amazon.com/gp/product/B01EV33R8S/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Now, if you can find an HDBASET kit that combines the HDMI and the USB, that's the killer product right there. *Edit* - Damn I missed the obvious. Same Amazon listing with the USB extender, here's your combo product:
https://www.amazon.com/gp/product/B01GYKVWC4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
For $220, that's a steal for what that AV Access kit does.
I can tell you I went the cheap route because I didn't want to dump a ton of money into it at first and possible spacing issues on the board. This is the exact one i got: https://www.amazon.com/gp/product/B075JH3S54 with this adapter https://www.amazon.com/gp/product/B008DFVQFW/
I tested it on my other unit while I was waiting for my other parts to come in and it works perfectly in AdvMAME. Supposedly trackballs and spinners work in libretro-mame2003 but i couldn't get it to work at all in there. My only complaint with AdvMAME is you have to remap the buttons on every game. Not a huge deal, but it is an annoyance.
Say hello to analog! Ungodly savings: http://www.amazon.com/gp/product/B004JLFS58
edit: this one has better reviews
Ah. FYI, my scanner shows that you can get it for $220 on Amazon - http://www.amazon.com/gp/product/B002VY8T2Y?linkCode=xm2&tag=ihctc-10644-20
Google gave me this
You my friend need a USB switch so you don't need two keyboards/nice:
USB Switch Selector, KVM Switcher for 2 PC Sharing 4 USB Devices, One-Button Swapping for Keyboard, Mouse, Scanner, Printer, Computer https://www.amazon.com/dp/B07M66SD79/ref=cm_sw_r_sms_apa_i_X9.FDbAACTD52
This should work. https://smile.amazon.com/dp/B06XDRT9NX/
I can't help with the latency concerns.
EDIT:
>Does it support 144hz display?
>
>Yes, SV231DPU34K supports DisplayPort 1.2. Therefore, depending on the resolution it will be able to handle 144hz as long as it is within the limitations of DisplayPort 1.2.
>
>Atha, StarTech.com SupportBy StarTech·com Support Manufacturer on March 5, 2019
From this one: https://smile.amazon.com/dp/B07JDYTYST/
Which is the same but for only 1 monitor.
Maybe something like this? -- https://www.amazon.com/Revesun-Multi-Viewer-input-output-Switcher/dp/B01D89JEDI
or -- https://www.amazon.com/Expert-Connect-Multi-Viewer-Divider-Viewing/dp/B079SHZFRX
Do you know which one will support 3 monitors? The KVM's I see support multiple computers.. not necesarrily multiple monitors
http://www.amazon.com/IOGEAR-4-Port-Switch-Cables-GCS1104/dp/B002RCTNKW/ref=sr_1_5?s=electronics&ie=UTF8&qid=1324327374&sr=1-5
My personal favorite is the 2-Port IO Gear KVM for most setups, I use these on 3 of my gaming systems and have never had input lag. I don't use the VGA connect, just the USB and Audio, then I switch video directly on the monitor. I prefer these because the cables are not detachable and you can double tap the "Scroll Lock" key to switch between 1 & 2. TrendNet also has some nice KVM the main difference being the detachable cables.
https://www.amazon.com/IOGEAR-2-Port-Miniview-Switch-GCS632U/dp/B0001BVXI6/ref=sr_1_3?s=pc&ie=UTF8&qid=1511120123&sr=1-3&keywords=KVM&refinements=p_n_feature_keywords_two_browse-bin%3A5060496011
I have 5 of these 2-Port TrendNet KVM around the main building for various systems, I like them and have never seen input lag. These were purchased by someone else prior to my arrival, but they work great so I see no need to change them out. I usually order the IO Gear, but these are just as solid and reliable, again, personal preference because of the one-piece design of the IO Gear.
https://www.amazon.com/TRENDnet-Monitoring-Auto-Scan-Feedback-TK-207K/dp/B000F4C310/ref=sr_1_4?s=pc&ie=UTF8&qid=1511120123&sr=1-4&keywords=KVM&refinements=p_n_feature_keywords_two_browse-bin%3A5060496011
I use 3 of these 4-Port TrendNet KVM for another location. When I arrived there was already 1 on-site, and when I needed more I had no reason not to buy the same brand and style. Great price, very reliable, no input lag, and they have all lasted well over 2 years of constant use.
https://www.amazon.com/TRENDnet-Connections-Resolution-Computers-TK-407K/dp/B000JP1TFG/ref=sr_1_2?s=pc&ie=UTF8&qid=1511121027&sr=1-2&keywords=KVM&refinements=p_n_feature_keywords_two_browse-bin%3A5060498011
Now, I do have one of these 4-Port ieGeek KVM for a smaller server setup. I hate it. It just feels cheap, it has a single button that cycles through all 4 connections whether there is anything actively connected to it or not, and the cables are stiff and unwieldy. There is no input lag, the change response is fairly quick, but it doesn't support the double tap Scroll Lock to cycle like the IO Gear or TrendNet models, so I have to make sure it is physically within reach while using it.
https://www.amazon.com/ieGeek-Switch-Monitor-Keyboard-Control/dp/B00J7JGAHM/ref=sr_1_3?s=pc&ie=UTF8&qid=1511121027&sr=1-3&keywords=KVM&refinements=p_n_feature_keywords_two_browse-bin%3A5060498011
I use 1 of these 8-Port TrendNet KVM for one of my workbenches because I still needed PS/2 with the USB when I bought it, but it still works great after 3 years, and again, no noticeable input lag.
https://www.amazon.com/TRENDnet-Connection-Monitoring-Computers-TK-803R/dp/B000P05FAA/ref=sr_1_2?s=pc&ie=UTF8&qid=1511120407&sr=1-2&keywords=KVM&refinements=p_n_feature_keywords_two_browse-bin%3A5060502011
I use 1 of these 16-Port TrendNet KVM for another workbench because the 8-Port TrendNet was so reliable, I got this one. I didn't need the PS/2 this time, but it is nice to have just in case I do get any more really old systems in.
https://www.amazon.com/TRENDnet-Connection-Auto-Scan-Pluggable-TK-1603R/dp/B000P03EO4/ref=sr_1_1?s=pc&ie=UTF8&qid=1511120699&sr=1-1&keywords=KVM&refinements=p_n_feature_keywords_two_browse-bin%3A5060506011
I might just try ordering a couple ribbon cables, just for laughs. But i don't now if they are A or B type.
https://www.amazon.com/IOGEAR-4-Port-Switch-Compliant-GCS1104/dp/B002RCTNKW/
I have three of these on my desk at work and one at home. They're great.
A kVM like this is less than $200
Both cards support HDMI.
https://www.amazon.com/TESmart-HDMI-Ultra-Switch-3840x2160/dp/B078KG5N2Q/ref=zg_bs_13983771_19/143-5649160-3626521?_encoding=UTF8&psc=1&refRID=DZFXYRQPEP65CEZ96434
USB Switch Selector, KVM Switcher for 2 PC Sharing 4 USB Devices, One-Button Swapping for Keyboard, Mouse, Scanner, Printer, Computer https://www.amazon.com/dp/B07M66SD79/ref=cm_sw_r_cp_apa_i_gK1vDbMSFNWEK
Keep one of the plugs internal, plugged into your raspi, run the other one to something like this, with the port mounted towards the back.
StarTech.com 1 ft Panel Mount USB Cable B to B - F/M (USBPNLBFBM1) https://www.amazon.com/dp/B002M8VBIS/ref=cm_sw_r_cp_apa_i_7M1vDb5N53ENZ
As others have said, a 2x3 KVM switch isn't going to be so cheap. Looks like StarTech makes one (http://www.amazon.com/StarTech-com-Triple-Monitor-Switch-Audio/dp/B008CXFM96) but I've never had good luck with their KVM products. I'd say if you don't want to spend stupid large amounts of money, I'd go with 3 single-monitor KVMs.
If you do something with a remote (like http://www.iogear.com/product/GCS922U/), you could always splice the cables together so one button would control all 3 (Providing the remote is simply a close-contact relay). Then you just use one for the keyboard/mouse, and only use the other ones for power.
What's the misinformation you've already encountered (so that commenters not perpetuate frustration points)? Hopefully this won't be one of them. Are you using an active PS/2 to USB convertor vs. a passive passthrough adapter? https://www.amazon.com/Perixx-Adapter-Keyboard-Interface-PERIPRO-401/dp/B008DFVQFW/ (I'm assuming the "Built-in USB IC" in the description means it has the active circuitry to translate PS/2 protocol to USB.)
From the look of it I'd take a resolution hit to my desktop with that. "Supports video resolutions up to 2048 x 1536" I was wondering if there was an easier way to do what I was suggestion as two KVMs seems excessive. Looking at this at the moment, just quite expensive obviously
https://www.amazon.com/StarTech-com-2-Port-DisplayPort-Switch-SV211DPUA/dp/B00FSARDCA/ref=sr_1_2_sspa?keywords=displayport+usb+kvm&qid=1562886501&s=electronics&sr=1-2-spons&psc=1
As long as you have enough ports on the Surface pro dock to connect everything else.
i have the HDMI version and its nice keeping hardware count down on duplicate keyboards/ mice. etc.
A kvm switch im not sure if this one supports simultaneous input but this will get you on the right track.
Multiple monitor KVM switches with digital display inputs certainly exist, but you may need to find one which has the right inputs/outputs depending on what outputs the laptop (or dock) has.
For a KVM with digital inputs/outputs, image quality will not be degraded, but make sure to check the specifications for any limitations on use.
Another potentially slightly cheaper option than a KVM would be to use the extra video inputs on the monitors. For example if your monitors have DisplayPort and HDMI inputs, you can hook up your computer with DP, and her laptop with HDMI, and switch video with the monitor video select buttons. You can then put the peripherals (keyboard, mouse, audio with a USB interface) on a single usb hub, and move that one cable over.
If you want more help please list what exactly the laptop is (so we know the outputs and dock options), and what GTX 1080 (to know what video outputs it has), and your monitors (to know what inputs they have).
Maybe a KVM over ethernet?
https://www.amazon.com/StarTech-SV565UTPU-Console-Extender-500-ft/dp/B00267TXZ8
I did find some possible solutions:
$540$430.That's a bit steep, and I'd still have to figure out how to connect them all to the Macbook - it would likely mean purchasing a Thunderbolt docking station and USB GPUs on top of it. I may have to look for only remote desktop solutions.
I tried dual boot setups in the past and it never really worked out. Like you I would always eventually just boot in Windows.
Mu current setup is better, but it required two machines. My file server runs Linux mint. I bought a cheap switch to interact between the two with a single monitor, keyboard, mouse and speakers. So there's no delay when I want to use one or the other.
A KVM with the necessary cables and adapters would work:
https://www.amazon.com/TESmart-HDMI-Ultra-Switch-3840x2160/dp/B078KG5N2Q/ref=lp_13983771_1_7?s=pc&ie=UTF8&qid=1557870045&sr=1-7
I have never used this, but I THINK this is what you're looking for
https://www.amazon.com/StarTech-SV565UTPU-Console-Extender-500-ft/dp/B00267TXZ8
I put my workstation in the closet of my spare bedroom and my mouse / keyboard / monitor are in my living room. All you need is something like this and an HDMI <-> Cat6 extender (I'm using some now discontinued Cables2Go RapidRun cables, so I can't make a recommendation for the HDMI extender). For the distances you're talking, it should be physically easier to do than what I went through (cables up the closet wall, into and across the attic, then down the wall in the living room). :)
This guy has Display Port 1.2 that supports 4k 60Hz.
I use this one with a Windows 10 computer and another PC using Fedora:
https://www.amazon.com/TRENDnet-2-Port-Switch-Cable-TK-209K/dp/B000L4D42Q/ref=sr_1_3?ie=UTF8&amp;qid=1500988191&amp;sr=8-3&amp;keywords=trendnet+2-port+usb+kvm+switch
I only use it for the KB and mouse, not video, but it has worked fine.
Like this?
https://www.amazon.com/Aten-Technologies-Bluetooth-Switch-CS533/dp/B0094FN81K
Yes -- there are display port KVM switches.
Under $150 might be hard. You didn't specify connection type but this is dual dvi and just about your price range.
There are some Belkin ones that good as well, however they will be pricier. Also most KVM boxes these day require you to get your own cables.
You could, though I wouldn't. You would not gain any performance or anything as long as you use good cables in the first place.
If you're going to run a dedicated cable, you could try something like this: https://www.amazon.com/USB-Console-Extender-over-CAT5/dp/B00267TXZ8
I probably wouldn't use that exact one, it's just a good example of something to maybe try. Though if you do get that or something like it, get a good quality cable, something like a cat6 or cat6a.
You run a cable between the 2 units, put one unit at your desk with a monitor, keyboard and mouse hooked up to it; and put the other unit by the server. Just connect the second unit to the server and voila, you're done.
Have you seen Level 1 Tech's KVM? They make a dual monitor versions that supports 1440p at 144hz. While not officially supported G-Sync pass-through is reported to work as well as FreeSync. They're cheaper than comparable IOGear dual monitor DisplayPort KVM, but that's not saying much as it's still $565 without cables. https://store.level1techs.com/products/kvm-switch-dual-monitor-model
I've looked for a USB switch that is controllable via keyboard commands but have yet to find one. I'm currently using IOGear's GUS402 4-way USB switch with IOGear's GCS1104 4-way DVI KVM to switch my keyboard and mouse between the console and pass-through ports to get around console port limitations. It has a remote switcher that I put next to my keyboard. The switch works well for the most part but I do have issues with devices not being recognized occasionally and having to cycle through outputs. That's likely due to the fact that I have 20 ft of cable end to end including KVM, switch, and device cables.
You might have more luck asking for a solution in /r/homelab than here. It won't be anything custom built but there might be a used piece of enterprise gear that would do what you're looking for.
It's not extron, but I used this for about a solid year before I left my company. It was rock solid. It was only for mouse/keyboard though.
https://www.amazon.com/AV-Access-Extender-Operating-Synchronously/dp/B01EV33R8S
You need a KVM switch: StarTech.com 2-Port USB DisplayPort Cable KVM Switch with Audio (SV211DPUA) https://www.amazon.com/dp/B00FSARDCA/ref=cm_sw_r_cp_api_3XHCxbV0JH9RP
Purchase HDMI/USB ethernet extender and run ethernet cable from room with console to room with TV. That will give low latency output of the console on the TV.
Streaming through the laptop then out to the TV is a bad idea.
Alternatively just buy a cheap used Xbox and set it as your secondary console.
>I have a X1E 8750H 32GB RAM and two SSDs NVMe 970PRO 1Tb
You are not poor. No need to use poor people solutions to problems
Then all you need is some nice kvm switch or even just some cheap one and you are switching between the two systems instantly.