Reddit reviews UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, Most Micro USB Security Camera and Tablet - IEEE 802.3af Compliant
We found 14 Reddit comments about UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, Most Micro USB Security Camera and Tablet - IEEE 802.3af Compliant. Here are the top ones, ranked by their Reddit score.
5V/2.4A & 1000Mbps - Power micro-USB devices via an Ethernet cable, along with gigabit data transfer (which you can put aside if you only need power)PoE HAT Alternative - Use no GPIO pins. Compatible with Raspberry Pi case with fan or add-on screen. Support Raspberry Pi 3b+ and previous modelsExtend Powerline - Deliver power to micro USB devices without nearby AC outlets and upgrade them to PoE (Power over Ethernet) from up to 400 feetReplace Power Supply - Remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devicesSave Your Time - Plug and play compatibility and quick seller response. NOTE: an 802.3af compliant PoE injector/switch is required to use this device (not included)
The switch and LED are nothing special. They came in a bulk electronics supply kit that I purchased a long while back.
Here is a full parts list sans the Raspberry Pi:
I need a couple days to re-visit the python code and make sure it's easily re-distributable and I'll make another post with a GitHub link.
I use these for my splitters depending on the device:
This was the one I used, but there are likely cheaper ones. https://www.amazon.com/dp/B07CNKX14C/
i used these fairly useful
https://www.amazon.com/gp/product/B07CNKX14C/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
You could also go with a POE to USB adapter for giving it power and never have to worry about batteries and the Ethernet could be it's way of getting calendar updates in real time.
UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power and Ethernet https://www.amazon.com/dp/B07CNKX14C/ref=cm_sw_r_cp_apa_i_OK31DbFBV969Q
As promised, here are my sourcing links:
​
​
The rest of it is pretty standard stuff, Raspberry pi, misc hardware from any local hardware store etc...
I am using something like this on the raspberry pi side https://www.amazon.com/dp/B07CNKX14C/ref=cm_sw_r_cp_api_Q.31Bb2Y6TM9Y
PoE injector on the switch
Run ethernet cabling instead of trying to figure out how to get 5v power to the cameras. Ethernet is more flexible and will be more robust in the long term. If you already have a sunk cost into your Wyze cams and you don't want to replace them with proper PoE cameras, you can get PoE USB splitters that will provide power. This would allow you to upgrade to better quality, wired cameras later on. I wouldn't recommend wifi cameras for any critical security applications.
This is one of the cheaper options which still supports Gigabit:
https://www.amazon.com/UCTRONICS-PoE-Splitter-Gigabit-Raspberry/dp/B07CNKX14C
This one costs twice as much but uses the native RJ45 jack on the newer Pi 3B+
https://navolabs.com/product/raspberry-pi-3-micro-poe-hat/
Yup, it’s a 5V micro USB output from the splitter that connects directly to the hub. This is an example of the kind of splitter I’m using. I bought a bulk pack of these on EBay to power a bunch of different hubs and raspberry pi’s.
https://www.amazon.com/UCTRONICS-PoE-Splitter-Gigabit-Raspberry/dp/B07CNKX14C
This is the other option
Also - if you have a good PoE switch there are other options out there that are not "hats":
https://www.amazon.com/UCTRONICS-PoE-Splitter-Gigabit-Raspberry/dp/B07CNKX14C?keywords=Micro+USB+Active+PoE+Splitter+Power+Over+Ethernet&qid=1540832819&sr=8-6&ref=sr_1_6
UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, Most Micro USB Security Camera and Tablet - IEEE 802.3af Compliant https://www.amazon.com/dp/B07CNKX14C/ref=cm_sw_r_cp_api_i_GbXFDb8TFFE8G
This works though. https://www.amazon.com/dp/B07CNKX14C/ref=cm_sw_r_sms_tai_aFSIDb