(Part 2) Best mounting tape according to redditors
We found 258 Reddit comments discussing the best mounting tape. We ranked the 52 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
I use some 3m heavy duty mounting tape and it will absolutely tear the paint off your wall when you remove these unfortunately. If you want a good hold there's probably no way to avoid some kind of surface damage upon removal.
https://www.amazon.com/gp/product/B07D2LWV7P/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
I tried this today to test it out: double-sided tape on the back of an outdated gift card, and stuck it on the stall door. Worked like gangbusters. In fact, it all but locked me in the stall; it took an effort to get the door open.
Any sort of double-sided tape would likely work. I used Gorilla double sided tape squares, which are designed to permanently bond surfaces, so maybe I'm lucky I didn't trap myself in there.
Moving forward, I'll be keeping one of these in my wallet. I can definitely picture using it in additional, non-bathroom scenarios where I have two items that need to be attached.
I actually use this double-sided foam tape:
XFasten Double Sided Tape Foam Mounting Tape, 3/4-Inch x 350-Inch https://www.amazon.com/dp/B01E9FG960/ref=cm_sw_r_cp_apip_17Dk17Eq7lYra
Cheaper than buying the normal 3M stuff at Wally World and Durant damage the surfaces I choose.
My insole was sliding back also, tried putting my 50$ moonrocks insole and the same thing happened which doesn't on moonrocks.
http://www.amazon.com/3M-Mounting-Squares-68-Inch-35-Pack/dp/B00004Z4A7
I just bought this and sticked 2 pieces per insole and solved the issue completely without the feel of them. Can't say anything about the comfort since I don't own the 2nd batch but they are very comfy. Anyway sometimes my toe hurts which doesn't even happen on the raf stans.
https://www.amazon.com/wall26-Heavy-Duty-Removable-Traceless-Transparent/dp/B07Z8SK16Y/
That's a really ugly url...
Edit: fixed
Velco sticky backs.
Here
I actually do this for the Eeveelutions hanged frame (see my submitted). I had terrible problems with the cards falling. I however didn't want to bend them (they go back to falling after awhile and also just didn't want to mess them up). I found these:
http://www.amazon.com/3M-Mounting-Squares-68-Inch-35-Pack/dp/B00004Z4A7
to work amazingly. They come off the cards really easily, but they give just enough tack to the cards to keep them staying in place forever. Plus they also allow you to more accurately place the cards and arrange them before putting the back piece on (since they stay, nice for measuring accurate spacing). Plus they are clear, so they're not an eyesore if you happen to be able to see the back of the picture.
Anyways, that's my two cents.
i pop my battery off to charge it, i use industrial ( for want of a better word ) velcro, this is what i use.
https://www.amazon.co.uk/gp/product/B00186Q7XY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
**UPDATE: download link for the files are now on thingiverse link so easier to get**
​
OK so here is the list of parts and the files you will need to do this mod
​
List-o-things
Link to the files you need is HERE (please be aware the sizing may need adjusting)(ALSO! The Clip holder wasn't made by me)
The Strap I'm using is HERE
Heavy duty Gorilla tape Double sided
2x M10 or M8* nut and bolt (you will need very short ones or be able to cut them down to size) (*M8 nut and bolt will give it room to move a bit).
​
Please feel free to use the files i have made but please give credit if you use or re-upload them, Thank you
​
A standard 60mm drill tip, makes a 60mm hole in your desk. I have one under my 1m mouse mat which has my keyboard, mouse and headset mix amp which cables go through to keep cables off my desk. Then I will drill another hole to the left of my peripherals for a wireless desk charger which is 60mm as well.
Another thing as some have mentioned are monitor arms, gives so much more desk room. Then another are cable clips and 3m scotch pads. These things keep cables off the floor and underneath the desk. (This is good for the cables now going through that hole you made earlier if you do do it). The 3m can then stick a USB hub under your desk to easily access a USB port to charge your stuff. Give me a second and I’ll link some of the stuff.
60mm wireless desk charger
Universal drill thing
Cable clips
Scotch 3m
Mouse mat
Headset hangar
I've experimented with Command strips, but have found that double-sided foam tape was a better solution in my home. Not only can you cut the tape to any length, the foam core allows you to press the strip to the tape and the tape to any surface without damaging the light strip. Command strips are still a good solution. It's just a matter of preference.
XFasten Double Sided Tape Foam Mounting Tape, 3/4-Inch x 350-Inch https://www.amazon.com/dp/B01E9FG960/ref=cm_sw_r_cp_api_4fKIybASZX8YN
I can personally recommend this double sided tape.
I didn't use it for this purpose but I used it to stick something to my dashboard in my car, still holding strong.
Nice work by the way :)
What you're looking for is 3M VHB tape.
You will need to clean of the residue. Try and rub/roll up what's there with the pad of your thumb. If you don't have luck, you can try alcohol and/or naptha (lighter fluid).
Once the surface is clean and dry on both the bumper and Surface, you can use an appropriate width VHB tape. It's not cheap stuff, but it's used to hold badges on cars and windows on skyscrapers. It's the right tool for the job.
Similar for me, but I went for actual heavy duty Velcro : https://www.amazon.co.uk/VELCRO-Brand-Heavy-Duty-Stick/dp/B00186Q7XY
This stuff is amazing. I've got an old iPad pro stuck to the wall with it aswell. Tried un-velcroing it the other day and gave up. Way too powerful.
Or:
https://www.amazon.com/4-Strips-Replacement-ZPass-Mounting-Strips/dp/B002DZJQ0A
or:
https://www.amazon.com/Power-Grip-Pedalboard-Velcro-Alternative-Mounting/dp/B004ZKIHVU
as other not-velcro alternatives to glue.
This camera inside of your helmet stuck in there with Velcro
I've been using these IKEA mirrors for years, but have had the devil of a time trying to mount them safely and effectively. They weigh about 1 lb each.
Reusable Scotch strips don't seem to do the trick (the mirrors fall after a day or so).
Permanent mounting tape holds... but rips up the wall on removal.
Are there any other options?
I used these EZ Pass/I-Pass/Toll Tag Tape Mounting Kit - Peel and Stick Adhesive Strips Dual Lock Tape - 4 Strips (2 Sets) with Alcohol Prep Pad https://www.amazon.com/dp/B07D4PK1TG/ref=cm_sw_r_cp_apa_i_xj-BCbY28T6S5
A double pack is also holding my 24 port switch to a board.
https://www.amazon.com/wall26-Heavy-Duty-Removable-Traceless-Transparent/dp/B07Z8SK16Y
/ref and everything after it is irrelevant garbage, all it does is tell Amazon how you got there and what other stuff you've viewed. Cut the useless bits off and you save your privacy and everyone else's eyes.
double sided clear mounting tape, ftw:
​
https://www.amazon.com/Outdoor-Mounting-Removable-Weatherproof-Thickness/dp/B07CDDBBN6/ref=sr_1_57_sspa?keywords=double+sided+clear+mounting+tape&qid=1559317736&s=gateway&sr=8-57-spons&psc=1
2 of those
Large Yellow Multipurpose Car / Household Cleaning Sponge https://www.amazon.co.uk/dp/B01NBUA7K9/ref=cm_sw_r_cp_api_CzRMAbA673C20
and this
Gorilla Glue 3044101 Heavy-Duty Double Sided Mounting Tape, 25.4 mm x 1.52 m https://www.amazon.co.uk/dp/B01FMXKIOM/ref=cm_sw_r_cp_api_hBRMAbD4G6VXX
would probably be a whole lot more comfortable if you can add your own about of foam to each section and they apply it to the headband.
Used for suction cup holders to allow better sticking to wall surfaces
https://www.amazon.com/BCP-Adhesive-Silicone-Sticker-Suction/dp/B07BT666TJ
I'm using this
https://www.amazon.it/dp/B01MDIZKTM/ref=cm_sw_r_cp_apa_i_meDTCbWPRJKY1
The best I've ever tried
I got them straight off Amazon when I lost mine. I just put in EZ Pass velcro strips
https://www.amazon.com/GOOACC-Pass-Mounting-Peel-Stick/dp/B002DZJQ0A/ref=sr_1_3?ie=UTF8&qid=1539620482&sr=8-3&keywords=ez+pass+velcro+strips
I'm sure you can get them cheaper per inch if you just buy a generic velcro strip roll you cut yourself, but whatever lol
Get some good double sided tape.
I've used this and it has held up well to the British winter so far.
To get it off cleanly just use some hot soapy water, it didn't leave a mark when I removed it before.
>I was wondering if there's anything I can use better than tape
3M VHB tape.
​
>that isn't harmful to my monitors
Well, RIP then...
Hi, you can use these and these or these if you prefer.
And then you just need to pick up some garden wire or something to make the tether.
You can mount things using these https://www.amazon.co.uk/Command-Mounting-Refill-Strips-Medium/dp/B008DCWJPG
Ive used them in my kitchen to mount a chalkboard.
Also, get a rug and some colour, maybe some cushions.
Maybe angle the single seater a bit more into the room rather than just at the tv.
Get a small shelving unit or sideboard to display things you like.
Hey, I actually fixed this pretty easily. I replaced the adhesive given with the Vivenchill and used this adhesive and cut it to sizes of the fans. Got rid of the the "vibration noise".
I used double sided adhesive pads to hang it on my cubicle. Something like these
http://www.amazon.com/gp/aw/d/B004NNEI94?pc_redir=1409306611&robot_redir=1
Link
Zna li neko dal ima u BGu da kupim ovo negde? Ili neka zamena?
I just use scotch restickable strips.
http://www.amazon.com/Scotch-Restickable-Strips-Inches-R101/dp/B0039N7EOA
two or three on each and they stick well enough without resorting to the 10lb hook and loop velcro which is a pain to remove from the desk later.
I tried bluetac type stuff too but my desk seems to be fairly nonstick. A lot of tapes and things won't stick well to the surface of mine for some reason. Worked fine on my old desk.
Wouldnt it be much more cost effective without losing the stickyness if I used clips like these and replacing the adhesive to make it stronger with these. I'm planning to use a flat ethernet cable like this so the clips I think should be fine. The cable length is quite long, which is why I mentioned price as I need quick a few clips.