Best nintendo 3ds & 2ds accessory kits according to redditors
We found 259 Reddit comments discussing the best nintendo 3ds & 2ds accessory kits. We ranked the 35 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 259 Reddit comments discussing the best nintendo 3ds & 2ds accessory kits. We ranked the 35 resulting products by number of redditors who mentioned them. Here are the top 20.
Here are the links for anyone interested:
And finally I ordered through Zen Market because hardly anyone shipped to my country
I have this. I have almost 30 games in there and there's still room in there for the console too.
This one holds 48 3DS games and 20 Switch games.
I'd ask your sister what happened (and never let her borrow your stuff again...)
If all else fails, use a circle pad cover.
https://www.amazon.com/Cyber-Premium-Slide-Cover-Clear-Black/dp/B00UURTXK6/ref=pd_sbs_63_t_0?_encoding=UTF8&psc=1&refRID=RWYRFQR2Z807PN97881A
Screen protector, yes; amFilm
Pro controller: I’d say no. My kids (7,6,4 yo) prefer the joycons. For adults, the Pro Controller is a more optimal experience imo.
Battery Life: depends on the game, but call it 3 hours.
Charger: car charger or power bank may make sense of will be in the car for more than a full charge.
Get a carrying case: Butterfox
Other games: Super Mario Odyssey (1-2 players); Snipperclips Plus (retail and digital) and Overcooked (digital only) are good games for 2+ players. To play 3 player you would need an extra set of joycons or a pro controller.
There is always the Circle Pad Cover.
https://www.amazon.com/Mcbazel-Plastic-Holder-Nintendo-version/dp/B00WU8EEAC?pldnSite=1
I got you man, order this one from Amazon. It says LL but that is Japanese for XL, the circle pad pro isn't region locked so all you have to do is put the battery in it, then snap your 3DS XL into that bad boy and change the controls in game to allow the CPP and you are golden.http://www.amazon.com/dp/B009LGO88E/ref=cm_sw_r_udp_awd_fsy3tb13R7WTJ
here you go!
> http://www.amazon.com/gp/product/B009LGO26W/
Yes, but tinyurl, bit.ly, goo.gl, etc. are not.
This one I've seen used a couple times.
I think I can do that for ya, honestly. I also have, for the left joystick, little caps that make grip better if that interests you too. Maybe private message me I suppose, get this goin!
Edit: and no purchasing, they're so silly cheap, I got it n the postage etc..
Edit 2: This is the left joystick cover, could hook you up with one of those. I honestly love it. Long gaming sessions are perfect for this seemingly simple and pointless lil' grip.
Edit 3: And this is the c-stick replacement. Someone else linked it above as well, but yeah, the psp-1,000 joystick or whatever. Works really great.
Edit 4: Since I'm really gettin down on all this N3DS speak, I'd like to share this as well. My goodness, it makes gaming 1,000x better. Since the grips are not directly under the 3DS, and they are almost basically on the sides, it makes it feel like a legit, comfortable ass videogame controller! (In the vein of an Xbox or PS4 controller) With how I said the grips are on the sides, it makes it not feel so damn cramped like some of the other N3DS grips can. It's seriously so, SO worth the $15 bucks.
Do you have the circle pad pro? It honestly really helps alot, and its pretty cheap, the japan version works with any 3ds
http://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-Included/dp/B009LGO88E/ref=sr_1_1?ie=UTF8&qid=1426256505&sr=8-1&keywords=nintendo+control+pad+plus
This happened to my ambassador program 3ds aswell. Here's what I did. I ordered these: http://www.amazon.com/gp/aw/d/B00C1XYUSM?pc_redir=1409138447&robot_redir=1
And I put a piece of two way tape on the inside of it and stuck it in place of the analog. The tape is secure, it won't come off unless you want it to, and this way you can change the analog to any one you want. Here's some pics: http://imgur.com/a/V0Q7Z
The only problem is the analog is a tiny bit taller than the original, so there will be a very small gap when closing the 3ds. If this bothers you, the circle pad grip also comes with a keychain you can attach to the 3ds that holds 2 of the circle pad grips. So you can just place them on that and attach it when you play it. Hope this helps!
Bought these a year ago and they fit fine, I don't use PAL but it should not be different. Strange.
Edit: I got this one, actually https://www.amazon.com/dp/B00C1XYUY6/ref=cm_sw_r_other_apa_IhqNxbEG6K1T7
Works fine, I hated the concave thumb stick, works perfectly for my n3ds
>I've seen those plastic things that go over the pad, but you can't close your DS with one on!
Mine is a Cybergadget Circle Pad Cover (slim type). I can close my N3DS XL perfectly with it.
https://www.amazon.com/Cyber-x30FB-Premium-Slide-Cover-Clear/dp/B00UURTXK6/ref=pd_sim_63_4?ie=UTF8&dpID=51gRgGou0uL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&psc=1&refRID=X9B0YNGBJJSAT3HJFJBR
would that help?
https://www.amazon.com/Cover-Plates-Mario-playing-cards-Nintendo/dp/B016XIA6QK
I'd recommend the Butterfox case instead of the licensed one, since it's more versatile, aesthetically pleasing, cheaper and fits more stuff. (i.e. ac adapter). If you want this one than make sure it's the 9 cartridge one, since that's the newest version. Also a 128 SD card class 10 will most likely go on sale this coming black friday/cyber monday.
I think I've the one you're looking for: butterfox V3. I use this when I don't need to bring my dock. This butterfox case can fit 1 extra pair of joy-con and a AC adapter/or Powerbank
The only things that the IR port could be used for are built in to the body the New3DS(XL) systems.
The Circle Pad Pro for Regular Size 3DS and XL size 3DS are not required for the N3DS(XL) as not only are the new systems the wrong size, but the CPP's features are all built in standard equipment for the New2/3DS systems! That's the two extra shoulder buttons on the back (ZL, ZR) and the gray rubber C-stick nub above your ABXY buttons.
The Amiibo Reader (AKA: Nintendo NFC Reader/Writer) is also already built in as any Amiibo can be gently placed on your bottom touchscreen when prompted to activate or save your Amiibo figurines' progress.
Since the 3DS is in its twilight life cycle (we're sadly in the last year closeout to obsolete status) to make way for the Nintendo Switch fully taking over, I highly doubt that a new accessory is going to be released for the Nintendo 3DS that will utilize the IR port. As long as everything else works okay on the system, I don't see a reason to send it in to Nintendo Repair.
As long as this means the little black oval window on the back of the system next to the charging port, that is the one that is not used.
However, like pawlik23 asked, if it's the little dot next to the inside camera on the top shell, that is an IR light emitter. That IR LED is used to shine IR light on your face in poor lighting conditions if you want to use 3D in low, no, or poor light conditions as cameras can see IR, but our eyes can't. That allows the Stable 3D to work in nearly all situations. If that is what is scratched, your Stable 3D may not work correctly when your face is dark or if a light source is behind your face, and that may be worth sending in to Nintendo.
If you plan on getting a 3DS XL, I have to recommend this.
It makes your 3DSXL FEEL like a controller.
And if it's any kind of 3DS, reguklar, 2ds or Xl I reccomend this it makes it feel better, and it;s easier to do tilts.
its just a problem with the 3ds originally not having any "right stick" if nintendo designed the 3ds to have dual circle pads, it would be one of the best gaming experiences
on mine, I use this along with the psp cap mod
https://www.amazon.com/Monster-Hunter-Cross-hunting-gear-Nintendo/dp/B016XCSBC2
Feels good for medium and large hands and makes the shoulders feel like the dual shock 2 r2/l2. though only for New 3ds XL models
*https://www.amazon.com/Cyber-Premium-Slide-Cover-Clear-Black/dp/B00UURTXK6/ref=pd_lpo_sbs_63_t_1?_encoding=UTF8&psc=1&refRID=SPMB3DE8X9E9NBD7DQ7V
this too
https://www.amazon.com/gp/aw/d/B00UURTXK6?psc=1&ref=yo_pop_mb_pd_title
Oh, nice. I have a slightly older model that I like better because it doesn't have the second flap. Still has a ton of room in it.
https://www.amazon.com/gp/product/B06Y52CDHT
I love this case because it holds 29 games
https://www.amazon.com/dp/B07316FNJK/ref=cm_sw_r_other_apa_i_Pe97Ab4JAF2W1
You can use both sticks to move around and shoot during the sky sections, but it doesn't work that way during ground sections.
It's not really something you need unless you're left-handed. The purpose of the CPP in this game is simply to give lefties a circle pad to use.
The controls are a bit strange and your hands might cramp if you don't hold the system right, but you'll adjust and eventually get used to them.
EDIT: Oh and one more thing. You said you have the XL. The standard Circle Pad Pro does NOT work with a 3DS XL. You have to purchase the bigger "Circle Pad Pro XL", specifically made for the system.
It isn't sold in normal stores, but you can buy it from Amazon here
Circle pad pro, its this battery powered peripheral for 3ds that allows the player to use an extra stick and two extra shoulder buttons. looks like this
Which version of 3ds do you have? If you have an original version of the 3ds or 3ds XL I would suggest the claw pad pro I linked to. It puts an additional Circle pad a little below the L button on the system. Gives you have claw feelings and is way more comfortable at the same time.
I honestly have considered buying an OG 3DS again so I can use it with my American release monster hunter games.Though due to time since release they are getting a bit more spendy.... but it is amazing.
edit: Also could try just the normal Circle Pad Pro. 3DS XL OG 3DS
I think /u/8drawr means the pro controller but the actual pro pad is a tool for the 3DS
you could try these
Hori clear case & screen protectors.
I also use this circle pad cover, it adds more grip to the circle pad.
A few different products like these exist, where you place them over the circle pad. You have to be careful to remove it with each use and to not close the system with them on.
You could also completely open up the system and replace the pad with one of your choosing, like this.
Be cautious of using anything sticky, like bandaids or circles of velcro. Some adhesives leave icky residue that's hard to safely remove.
There's really no perfectly safe or easy solution other than pausing your battle and wiping your hand off a lot. :/
https://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUY6
this is the sort of cover I was speaking of.
https://www.amazon.com/gp/aw/d/B002E0B2BK
this kind of grip tape.
I ordered these grips that you put on the circle pad which prevents thumbs from slipping, and it can be very helpful for intense games like Smash Bros.
These arent the same exact ones I got, but its more or less identical: https://www.amazon.ca/Cyber-Premium-Slide-Cover-Clear/dp/B00UURTXK6/ref=sr_1_2?ie=UTF8&qid=1502851159&sr=8-2&keywords=3ds+circle+pad
Thanks! These are actually faceplates from Japan though!
https://www.amazon.co.jp/gp/product/B016XIA6QK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Edit: I just realized the title is kind of misleading...oh well.
The new butterfox case is good. I have one and can carry two extra joycons, the 4 attachments for them, switch + joycons attached. And some more room for other things.
It has game slots but most cases do.
Link to the one I have!
Links for all the items I got for your reference:
Screen Protector
Memory Card
Case
Stand
Battery Pack
Pro Controller
Nyko Dock
I use those too!
For anyone interested, they come in "3DS Clean and Protect" kits. Target has them on sale for $7 sometimes. Amazon link: https://www.amazon.com/Nintendo-Official-Clean-Protect-Kit-3DS/dp/B004J1DD14
I have a US 3DS XL. I bought a Japanese Circle Pad Pro for the LL from Amazon. It work's perfectly.
The Japanese import is cheaper.
Circle Pad Pro - Nintendo 3DS LL Accessory (3DS LL Console Not Included) Japan Inport https://www.amazon.com/dp/B009LGO88E/
If you're looking for something more neutral
MHGen is the easier game, MH4U is the better game. That being said MHGen is still a really good game and fun. If MH4U were 8/10 MHG would be like 7/10.
MH4U is by far more difficult than MHG tho, MH4U will kick you in the teeth and call you a little bitch when you get to end game Guild Quest level 140.
The ingame story isn't that important, your hunt and journey through progression at the story. If you get Monster Hunter on your 3ds XL make sure to buy a circle pad pro, they aren't that expensive but it's kind of important to have.
https://smile.amazon.com/Nintendo-Circle-Pad-Pro-3DS-XL/dp/B00B3TXJ14?sa-no-redirect=1
Here it is.
I'm assuming your 3dsxl is not a new 3ds xl. Try and find a circle pad pro XL (make sure it's an XL size and NOT the regular circle pad pro). If your hands are big you'll love this thing. It's great for monster hunter. Here's one on amazon. I didn't check for the lowest price I just found one as fast as I could so you could see it. http://www.amazon.com/Nintendo-3DS-Circle-Pad-Pro-Sonstiges/dp/B00B3TXJ14
Google "circle pad pro games" and you'll get more info on it.
http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUSM
There's a lot of different kinds, so look around.
I don't believe there's a replacement part for that, but you could always buy a circle pad grip http://www.amazon.com/gp/aw/d/B00C1XYUSM?pc_redir=1409138447&robot_redir=1
Or you can just gut out a broken unit or circle pad pro for the part.
Protip: buy actual circle pad covers.
Before they were on amazon, I imported these and am still on my first cover.
I even have a second cover on my CPP for when I'm wanting to MonHun on the go.
A ton of grip options + several backups if any are lost/wear away for 8 dollarydoos- I'm still weirded out these aren't a more talked-about/mainstream thing 'round these parts.
Good luck OP!
Here, try these
I have these thumb grips and the gamecube style one is perfect for the 2ds and gives great grip, no complaints (I have used it on the 2ds for a while).
https://www.amazon.com/gp/aw/d/B00C1XYUY6/ref=yo_ii_img?ie=UTF8&psc=1
The circle pad cover is from this set: http://www.amazon.com/gp/product/B00C1XYUY6/
That's weird, cause I bought that from Amazon too
Here the link : https://www.amazon.com/Cyber-x30FB-Premium-Slide-Cover-Clear/dp/B00UURTXK6/ref=dp_ob_title_vg
You can buy small grips that go over the circle pad
https://www.amazon.com/dp/B00UURTXK6/
Think they even have different colors.
This would solve both sliding off your finger due to sweat and will hide the bump that OP has.
I was having a lot of problems with circle pad slipperiness, so I invested in these: Cyber Premium Slidepad Cover. It just sticks to your OEM circle pad with a little bit of double-sided tape. Also five stars.
As a bonus, I'm using the Monster Hunter Cross Hunting Gear grip. It's really outstanding for avoiding Fantasy Life and Kid Icarus Uprising cramps.
Buy these for grip. http://www.amazon.com/gp/product/B00UURTXK6?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
They just clip onto the top of your circle pad.
I just bought them and they seem to work well for grip. Make sure you put them on CORRECTLY, otherwise they will fall off. I use the one with the dots on my N3DSXL. My circle pad was slippery as well. This is a huge improvement.
The link provided there isn't a grip, it's a Circle Pad Pro for the original 3DS. You already have a C-Stick on the New 3DS, so it's pointless even if it did fit.
Either https://www.amazon.com/gp/product/B00WU8EEAC/ (which I bought) or https://www.amazon.com/dp/B00OTEMTD4/ are considered the best ones. There are pros and cons to each.
The first one doesn't have a cartridge slot open to pull your carts in and out, meaning you have to take the grip off to change physical cartridge games. However, it's more comfortable to access the triggers than the second one.
The second one is generally the more popular one despite being more expensive. There's room to carry two extra games in the back stand, and isn't as hard to take off as the first grip. However, the positions of the "fake triggers" can be confusing and uncomfortable for when you do actually want to use the 3DS triggers.
Butterfox has another case that just came out hat can fit the AC adapter. I didn't get the RDS case because in all the videos I saw the Switch was difficult to take out of the case.
https://www.amazon.com/ButterFox-Nintendo-Storage-Official-Adapter/dp/B06Y4VXRJZ/ref=sr_1_12?ie=UTF8&qid=1492268798&sr=8-12&keywords=butterfox+switch+case
68
https://www.amazon.com/Butterfox-Storage-Holder-Nintendo-Switch/dp/B07146988L/ref=sr_1_5?ie=UTF8&qid=1523496177&sr=8-5&keywords=nintendo+plastic+storage+cases
or you can just put them in your pockets, 25 for each front pocket (since you don't want to crush them in your back pockets).
a cheaper alternative would be use those bags that you get at grocery stores that hold your groceries.
https://www.amazon.com/gp/product/B07316FNJK/ref=ox_sc_act_title_1?smid=A2SKJWZFXSLPUZ&psc=1 Is this a good case?
A New 3DS XL is 160mm x 93.5mm x 21.5mm.
A New 2DS XL is 160mm x 86mm x 20mm.
So the 2DS XL isn't quite as tall or as thick, but it's just as wide. I'd bet that most of the thickness difference comes from the top screen.
You can always get a hand grip to make it easier for you to hold.
[Updated] Hand Grip for Nintendo 2DS XL with 1 Stylus and 1 Clear Case for Nintendo 2DS XL https://www.amazon.com/dp/B075YP1CTH/ref=cm_sw_r_cp_apa_i_f..PCb6DV7DWE
This is the one I have, the fastsnail one is too narrow
I need these and if you have a DS, they will help you out for gaming on the go!
When does the contest end?
I was looking for them a while ago, too. They come in some kits, like this one: http://www.amazon.com/Nintendo-Official-Clean-Protect-Kit-3DS/dp/B004J1DD14
UK single game cases: http://www.amazon.co.uk/Assecure-Single-Black-holder-Nintendo/dp/B009UH7V60
US 3-game cases (close?): http://www.amazon.com/3ds-Traveler-Holders-Styluses-Essentials-nintendo/dp/B00ED4VIFU
It's nowhere near $400-500. Japanese LL, MH4, and a CPP is $268 off of amazon.
Just get the CPP
The CPP for XL would cost about $20 (As does the CPP for regular 3DS), and right now importing from Japan costs a little over $20, and there's no difference between JP, NA, and PAL consoles in terms of accessories. So there really isn't anything to stop you from getting one.
http://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-Included/dp/B009LGO88E
If the extra opinion helps, I bought a CPP grip for my friend hoping he'd play 4u. That recommendation failed, but when I tried it out, I found it really ergonomic, and it doesn't have the adjustment period I felt with the cstick. You can pick one up from amazon for $12~. It's the japanese LL version, but the accessory is region free and works with any language 3DS XL.
http://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-3dsXL/dp/B009LGO88E/ref=sr_1_1?ie=UTF8&qid=1393956759&sr=8-1&keywords=circle+pad+pro+xl
Japanese packaging but the circle pad pro is the same. The included club nintendo code only works for the Japanese club nintendo
you can buy both off of amazon for around the same price:
CPP XL
Cradle Charger
they're fulfilled by amazon so if you have prime you can get 2 day free shipping.
It's this guy right here.
There's also an official Nintendo product called the Circle Pad Pro that's a bit cheaper, but I like the ergonomics on the Hori product better.
And even though they're Japanese products, they work just fine with old-model American 3DSXL's.
http://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-Included/dp/B009LGO88E/ref=sr_1_1?ie=UTF8&qid=1421526095&sr=8-1&keywords=3ds+xl+circle+pad+pro
This is the one for the older XL models (don't know if you have an XL, but the extra screen size is really helpful for Monster Hunter too) https://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-Included/dp/B009LGO88E
Basically just fits around your 3DS and adds an extra analog stick on the right. There's an option in the 4U settings menu to enable it once you get it. It's a godsend.
I thinkkk this is the one for non-XL models, but you may want to do a little more research and make sure https://www.amazon.com/Nintendo-3DS-Circle-pad-Replacement/dp/B00T5I2RXQ
Save yourself, man!
If you have Prime it's 18 bucks.
http://www.amazon.com/gp/product/B009LGO88E/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Yeah, the exact one I bought just dropped a bit (http://smile.amazon.com/gp/product/B009LGO88E/), but seems like we got it at a low point. fist bump
http://www.amazon.com/gp/offer-listing/B009LGO88E/sr=/qid=/ref=olp_tab_new?ie=UTF8&colid=&coliid=&condition=new&me=&qid=&seller=&sr=
Here is the list. Go past the featured sellers and you get to one that is 23.99 and has free shipping from ninja online. will take about 3 weeks to get to america though.
I bought mine from amazon and paid $25.50 including shipping. Let me see if I can find the link to the one I bought..
Edit: I can't find the exact buyer I got mine from but this link shows multiple ones for about 25 bucks and free shipping, you just have to pick one.
http://www.amazon.com/gp/offer-listing/B009LGO88E/ref=dp_olp_new?ie=UTF8&condition=new
https://www.amazon.com/dp/B006J66CPG/ref=cm_sw_r_cp_api_7MX4xbMXCEXYN
Edit: that's the wrong one
Edit part 2: Nintendo 3DS XL Circle Pad Pro - Sonstiges https://www.amazon.com/dp/B00B3TXJ14/ref=cm_sw_r_cp_api_ROX4xbZ6RJJRG
didnt they make a CPP for the XL?
https://www.amazon.com/Nintendo-Circle-Pad-Pro-3DS-XL/dp/B00B3TXJ14
I'm interested in something like this, but theres a lot of mixed reviews on it.
Not sure if they'd really help. but Amazon does sell covers for it. http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUSM
Maybe try this http://www.amazon.com/gp/aw/d/B00C1XYUSM?cache=d3ffa441e9dea3d0cb281b23d09744e8&pi=SY200_QL40&qid=1410632408&sr=8-1#ref=mp_s_a_1_1
You could try these.
https://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUY6
I don't have them but I have hear good things and you don't need to modify anything. It sounds like what you're after.
I got the grip, but the grip wasn't the only issue for me, I also got [this] (http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUY6/ref=sr_1_1?ie=UTF8&qid=1413385288&sr=8-1&keywords=circle+pad+cover) I shoul be getting them before the endof the week I hope it's gonna help.
I have issues keeping the circle centered without it slipping a tiny bit and making me lose the tilt or smash or dash attack I wanted to make. Hopefully it's gonna help.
These seems to be a good fix actually.
http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUY6/ref=sr_1_sc_1?ie=UTF8&qid=1413054196&sr=8-1-spell&keywords=circe+pad+3ds
I'm sure you could affix it with some tape or glue dots or something.
http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUY6
These ones?
That sucks. Sorry it hurts your hands.
Also, Check out these Circle Pads for the 3DS. They might help with traction.
I bought this one - Works great, very comfortable
There are more as well.
They have grip pads for the circle pad too
I think it's one of those analog slide pad attachments from Cyber Gadget but I'm not actually sure.
I got nothing for your hand cramps unfortunately, but even before smash I personally found the 3DS circle pad a bit too slippery for my taste. I grabbed some circle pad covers on amazon, and they've been working great:
http://www.amazon.com/gp/aw/d/B00C1XYUY6?cache=0061feed30983d095ab69c6adb6201f0&pi=SY200_QL40&qid=1411248560&sr=8-1#ref=mp_s_a_1_1
One's even got the same pattern as the GameCube stick =)
I ended up caving and buying a set of thumb thingies.
http://www.amazon.com/gp/product/B00C1XYUY6/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
If these don't work out, I know what to try next! Thanks, man!
I ordered it from Amazon.
http://www.amazon.com/gp/product/B00C1XYUY6/
There's an alternative circle pad pro for XL. The additional circle pad is on the left side, which allows you to control movement and camera with your left hand only, in the traditional PSP MH gripping fashion.
Yes I bought an XL because of this. It's much more comfortable for my right hand (the ABXY buttons are no longer far away from my small hands) and feels much more balanced. The only problem is my thumb still goes for the phantom circle pad and I need to unlearn that after playing through MH3G and MH4 village XD
Got it from here my friend, https://www.amazon.com/dp/B00UURTXK6/ref=cm_sw_r_cp_api_r.3CzbGM9DX26
https://www.amazon.com/gp/aw/d/B00UURTXK6
These are the best ones I've used. They're a little pricey, but they work really well.
I tried roughing the surface on mine as I found games unplayable with the default circle pad. It only helped marginally. The caps are a godsend and the best solution.
https://www.amazon.com/gp/product/B073TYDXLC/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B00UURTXK6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
For 20 bucks you can immeasurably improve your experience.
https://www.reddit.com/r/3DSdeals/comments/6zrk51/livingsocial_usa_new_3ds_xl_galaxy_160_new_2ds_xl/
3ds/2ds are currently on sale at this site
This one with the kickstand
You really need a grip to play monster hunter or its torture on your hands.
This glorious piece of plastic has allowed me to play 100+ hours of MH, I can't play without it now.
Someone else posted a grip for the XL, mine is for anyone that has a regular size N3DS like me.
The grip works wonders! Since it's a Non-XL "New" 3DS and since I no longer have my small hands, it makes extended play sessions very comfortable. It only cost me $5.99 too! I forgot where I got it from, but I'll take a look when I can.
Edit: Purchased it on Amazon
Gam3Gear Handle Grip with Stand for Nintendo New 3DS Black
https://www.amazon.com/dp/B00WU8EEAC/ref=cm_sw_r_sms_apip_xTzKOBsiqjIHo
They don't seem to be as common as the ones for the XL, but here are a couple of potentials. ebay [Amazon](https://www.amazon.com/Gam3Gear-Handle-Stand-Nintendo- Black/dp/B00WU8EEAC/ref=sr_1_1?ie=UTF8&qid=1479395397&sr=8-1&keywords=new+3ds+grip+-xl+-ll) For reference, mine looks like this.
This is the only plastic one I am aware of that is still easily obtainable for the n3ds (non-XL): Amazon Link
I think it feels great, but as other reviewers mentioned, it blocks the cartridge slot and can be a tight fit for some. It also makes the power button even harder to press.
Agreed. It felt painful dropping $30 on Amazon for 071, even with free two day shipping. I just know I'll get tired of Blastoise at some point and out of the entire numbered plates, that one really caught my eye. I figured I'd pick it up before it became a fad and everyone wanted one.
Still, I can almost understand why Boo is $100. Almost.
It's a DOBE charging grip. It almost triples my playtime lol
Edit: Here's the link if ever you're interested in getting one :P
https://www.amazon.com/Controller-3DS-LL-Rechargeable-Protective-Indicator/dp/B01HELQBI2
Just in case anyone was interested there appears to also be a duriflexi version of this case coming out in a starter set that comes with a couple other accessories
https://www.amazon.com/HORI-Pikachu-Pack-Starter-Kit-Nintendo/dp/B01J3Z5OOE/ref=sr_1_2?ie=UTF8&qid=1469902204&sr=8-2&keywords=hori+pikachu
This case fits the Switch, the AC adapter + joycons & games: https://www.amazon.com/ButterFox-Nintendo-Storage-Official-Adapter/dp/B06Y4VXRJZ/
I gotcha!
I have multiple cases, I primarily use this one:
https://www.amazon.com/gp/product/B06Y52CDHT/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
And I switch to this one when I need to carry more stuff:
https://www.amazon.com/gp/product/B071RC8N1S/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I actually hook my bike helmet to the back of my backpack on the outside using this backpack:
https://www.amazon.com/Deuter-Speed-Lite-20-Ultralight/dp/B013FX2JCU/ref=sr_1_9?ie=UTF8&qid=1522936596&sr=8-9&keywords=deuter+backpack
This one holds 20 Switch games and 48 3DS games.
I can personally vouch for this grip. I can't even imagine playing MH without a grip at this point.
Here.
Have a 3dsxl [old model] I use the circle pad pro for mh4u. I like the extra grip as I find the 3dsxl to be a bit of a hand cramp. Still looking forward to getting a n3dsxl tho.
I ordered a circle pad pro from japan fit the old 3dsxl,
Circle Pad Pro - Nintendo 3DS LL Accessory (3DS LL Console Not Included) Japan Inport https://www.amazon.com/dp/B009LGO88E/ref=cm_sw_r_cp_apa_fB2JybEN32HH9
Works fine in my US 3dsxl. Uses 1 AAA battery, haven't had to change it much yet.
There's also a regular 3ds version if you go that route.
Something to add is that a lot of games get a load time decrease with the new 3ds (and xl) models. Usually a few seconds but kinda more noticeable in newer games.
I would recommend investing in a circle pad pro. These cannot be used with the N3DS though just fyi.
Here is one for a normal-sized 3DS - Here (no referral link)
Here is one for a 3DS XL - Here
I loved being able to use the zl and zr to move the camera.
For N3DS I just got used to the nipple.
I personally have tried one of these although I've heard it's very hard to get one these days. I only own an old 3DS and I use this all the time and it feels great.
just buy this.
bought mine from here to play MH.
https://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-Included/dp/B009LGO88E
Not sure where you're located if Amazon/Gamestop/Ebay are good choices for you? I've found that using the lock on/button to center on the monster is immensely helpful, both for making sure I know where it is and for maintaining the critical distance.
I think practice is really the best thing! Sometimes I've taken quite a long time to take down a monster simply because I took time to watch its moves and dodged around until I felt comfortable with its attacks. I picked up adept style for a few fights because the dodge is much more forgiving once you know where to dodge (With a great free charge rank up/power shot!).
If you're having trouble with the weapon itself there are really great videos up on youtube and guides online (and here) for different approaches. Again, it really depends on your playstyle. At a glance and a quick search, this page seemed helpful! http://laxgg.blogspot.com/p/mhgen-bow-mechanics.html
It also might help to have a protection/healer palico that has taunt and some heals for you if you're struggling with item management or aggro from the monster. As someone that plays LS offline and LBG/bow online, sometimes its harder when you don't have other hunters keeping it busy lol. You do have a pretty large chunk of time to complete your hunts so don't feel rushed that you can't watch the monster.
Amazon?
There there, this thing has a better control stick anyway
That is called a Circle pad Pro (CPP). You can snag one on Amazon.
http://smile.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-3dsXL/dp/B009LGO88E
I'm going to assume that it is this that I will want.
Also, is there a place you would recommend to purchase the game or a way to find it on sale?
You can solo with any weapon, in my opinion. With the ranged weapons, you have to take more care on how you place your shots since you're working with limited resources (ammo or coatings depending on if you go bowgun or bow,).
If you have the 3DS XL, I recommend the Circle Pad Pro for aiming. I like how it feels so much I haven't considered upgrading to the New 3DS. If you have the older, smaller 3DS I don't know if there's an option for you besides using the touchscreen to move the camera.
3DS (CPP) should be found in stores (GameStop?) no problem.
3DSXL (CPP LL) might be harder to find in stores, I got mine online (Japan Import) for $20.
there are circle pads for the 3DS XL too. my roommate just got one.
http://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-Included/dp/B009LGO88E
It works with the Japanese LL and the NA XL (same model)
Yes, but you have to import it. Here is a starting point. You may be able to find a better deal.
Or you could get one of these like me.
Hey, they're cheap now. I had to pay $50. Ha
You could get this one.
Unsure of how much the shipping will be if you order from American Amazon to Brazil, though. Maybe you can find it on the Brazilian Amazon?
But it is definitely worth it at that price.
Cheaper version here: http://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-Included/dp/B009LGO88E/ref=sr_1_1?ie=UTF8&qid=1426286751&sr=8-1&keywords=circle+pad+pro
Just got it the other day, works fine for my xl.
Its Nintendo made circle pad pro for the 3ds xl (3ds LL in japan).
https://www.amazon.com/dp/B009LGO88E/ref=cm_sw_r_other_apa_i_fsTbBbJS720ND
So I looked it up and found this:
http://www.amazon.com/Circle-Pad-Pro-Nintendo-Accessory-3dsXL/product-reviews/B009LGO88E/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
What the fuck am I looking at? It moves the left circle pad to the right?
I would suggest amazon, it's imported from Japan but it's still from nintendo. $20
http://www.amazon.com/gp/aw/d/B009LGO88E
look for a store near you: http://www.amazon.com/gp/offer-listing/B009LGO88E/ref=dp_olp_new?ie=UTF8&condition=new
also the total cost from Nintendo should be like 28 with avrg 2 week wait.
I found this one, so they're definitely out there. I can't speak to how good they are, though.
I have an XL with a CPP and use one of these cases. I like it a lot.
http://www.amazon.com/Nintendo-3DS-Circle-Pad-Pro-Sonstiges/dp/B00B3TXJ14
The moral of the story: don't buy consoles at launch unless you really, really want to play a launch title. It's not worth it. It's never worth it.
Will run on both, but the only thing is you might need a Circle Pad Pro for the original 3ds/3ds xl (http://www.amazon.com/Nintendo-3DS-Circle-Pad-Pro-Sonstiges/dp/B00B3TXJ14).
It may not be a solution you like but you might look into a Circle Pad Pro. I have used one for over 400 hours of Monster Hunter and am very glad I have one for this game.
[Or just go on Amazon?] (http://www.amazon.co.uk/Nintendo-3DS-Circle-Pad-Pro/dp/B00B3TXJ14/ref=sr_1_1?ie=UTF8&qid=1381254824&sr=8-1&keywords=cpp+xl)
Get this.
Right here. http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUSM
There is no known way to get them fixed without replacing the entire pad, but you can prevent further scratches by buying this: http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUSM.
Here is link for the Circle Pad Cover and the Controller Grip.
The circle pad cover elevates the stick more and has grips. Makes it easier to use. It's more plasticy than the soft touch of the original
The controller grip is a soft touch, satin finish and feels amazing. The triggers make it feel great compared to the original shoulder buttons. I was planning to post it when I got my Char X decal, but I decided to post it anyway.
You can buy grip type things that cover the circles. Makes the circle 100 x's better. I'll post a link from Amazon momentarily....
Edit: Circle Pad Cover - Nintendo (3DS LL/3DS) Black Accessory Japan Inport http://www.amazon.com/dp/B00C1XYUY6/ref=cm_sw_r_udp_awd_mCCdub0RBGXPR
It looks so sleek! Have you ever tried using a circle pad cover?
i bought this item https://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUY6
as the circle pad silicone had begun to tore off i went to rip it from the circle pad housing. as i was thinking glue is a bad idea, i got this material https://www.amazon.com/Faber-Castell-Multipurpose-Adhesive-Non-Toxic-Removable/dp/B01DMA7QW4
good thing is this adhesive is removable (though there are some traces but can be removed easily) so that you can adjust the thickness until it feels right. the way to apply it is like applying a thermal paste, but way smaller
edit: the circle pad silicone is glued to the housing but since the silicone is flimsy, the glue is somewhat flimsy as well. should be easy to rip the silicone apart
I've already damaged my 3DS XL analog stick to the point where it is almost unusable. The XL has a much shittier analog stick than the normal 3DS. But I've just ordered THIS so hopefully it will improve the shitty analog stick. Ive also noticed that the buttons are starting to cave in a bit :(
Or get this if you have play like a primate
They make some of those specifically for the 3DS. Why not just use one of those?
To be clear, you are getting the New 3DS XL?
As far as games go, either ORAS or Pokemon X/Y are good options. You might also like Legend of Zelda: A Link between Worlds. It's an adventure RPG, but it's top down style like old Zelda games and pokemon games. Fantasy Life is also a good choice.
As far as 3DS XL accessories, I recommend these. They come in a few different colors too. Also, this grip is a life saver. My hands tend to cramp up when holding the 3DS XL, but this grip eliminates that problem.
As for just generally good games, Mario Kart 7 is good, Animal Crossing: New Leaf. I'm not as well versed in DS games.
I'm thinking of investing in a set of these (or something similar):
http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUY6
http://www.amazon.com/Circle-Pad-Cover-Nintendo-Accessory-Inport/dp/B00C1XYUY6 You want these, trust me. They give me a sense of safety while I play, like my circle pad isn't going to get damaged, and the give you a better grip at the same time. Takes a little bit of force to get on and off at first, though.
http://www.amazon.com/gp/product/B00C1XYUY6/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687462&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00C1XYUSM&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1MXAJP5V6FXNJ6A3GCCA
I bought these a while ago for my XL to protect the rubber. They work well and have good grips, but sometimes fall off which is how i lost my first one. The second one I chose seems to hold up better since it hasn't fallen off after intense ssb.
Here is the mobile version of your link
I'm pretty sure you can buy just the cover, but I've never seen the original ones going around.
Example: https://www.amazon.com/d/Nintendo-3DS-Accessory-Kits/Circle-Pad-Cover-Nintendo-Accessory-Inport/B00C1XYUY6
http://www.amazon.com/gp/product/B00C1XYUY6/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
amazon
https://www.amazon.com/Cyber-Premium-Slide-Cover-Clear-Black/dp/B00UURTXK6
Here you go https://www.amazon.com/Cyber-x30FB-Premium-Slide-Cover-Clear/dp/B00UURTXK6/ref=dp_ob_title_vg
They do fit. I have these on them. You got the older version which means they might not fit. The newer ones that i have above actually fit. I can post pics iyw
They're like US$13 for 6.
https://www.amazon.com/Cyber-x30FB-Premium-Slide-Cover-Clear/dp/B00UURTXK6
As a fellow 3DS owner I highly recommend getting a grip accessory of some kind. I have a n3DSxl and got the official, Japan only monster Hunter grip and it's simply amazing. It's almost as good as any console controller, hopefully there's a good one for n2DSxl (I hate these acronyms). Also, I really like these circle pad covers: https://www.amazon.com/dp/B00UURTXK6/ref=cm_sw_r_cp_apa_i_WLs1CbSHQJ76G
Also also, I recommend installing cfw. It's easy to do and you get a lot of benefits that aren't just piracy like custom themes that can cycle, increasing the CPU clock speed which makes games like MGS3 3D much more playable, and installing game mods that even work with carts. No, you won't actually get banned from online unless you try to play a game online that hasn't officially been released yet (and it's still circumventable regardless)
https://3ds.hacks.guide/
If your circle pad actually still works and it's just the rubber cover that peeled off, i wouldn't risk opening up the console just to replace it.
Instead, you can grab one of these: https://www.amazon.com/Cyber-%E3%83%BBPremium-Slide-Cover-Clear-Black/dp/B00UURTXK6/
You basically just put it above your circle pad and you should have a pretty nice grip over it.
These are the ones that I bought a few months back.
Cyber ・Premium Slide Pad Cover New 3ds / New 3ds Ll / 3ds Ll /3ds Clear Black https://www.amazon.com/dp/B00UURTXK6/ref=cm_sw_r_cp_awd_7do1wbDSGA0CN
The ones you linked were slightly more expensive than the ones I bought, so I avoided them. Ergo, I can't vouch for them :/. The ones I linked are pretty good though! Definitely an improvement, although the thumb slips will still happen after an hour or two of play. I highly recommend keeping some sort of small towel on standby just to wipe off the sticks and your hands in between hunts.
Link: http://www.amazon.com/Cyber-x30FB-Premium-Slide-Cover-Clear/dp/B00UURTXK6?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Though, the price went up since I bought them at $4.
You get like 6 grips though, so give them to your friends! Or when they shamelessly beat you at Pokemon because they discovered EVs while you didn't, Jared.
For OP or anyone else interested: You can buy covers that just fall into place over the existing circle pad.
https://www.amazon.com/dp/B00UURTXK6/ref=cm_sw_r_other_awd_xkf9wbM8QZ216
I have these on my N3DSXL and my fiancé's O3DS and they work well.
The grey cover of the circle pad of my n3ds xl is coming off, I saw this
https://www.amazon.com/Cyber-x30FB-Premium-Slide-Cover-Clear/dp/B00UURTXK6/ref=dp_ob_title_vg should I buy this?
https://www.amazon.com/Cyber-x30FB-Premium-Slide-Cover-Clear/dp/B00UURTXK6/ref=dp_ob_title_vg
Don't buy a new controller, clean/ fix your existing one. It will cost a lot less (~15$) and you will be able to clean/fix all of your other controllers as well. May sound weird because I'm telling you to fix your existing one but don't buy replacement joysticks... the rubber will just fall off on those too... =[ Ive wasted some $ on shitty "replacement" joysticks that don't even last a day. Buy 1 pack of these https://www.amazon.com/Cyber-%E3%83%BBPremium-Slide-Cover-Clear-Black/dp/B00UURTXK6/ref=sr_1_1?s=instant-video&amp;ie=UTF8&amp;qid=1479033751&amp;sr=8-1&amp;keywords=3ds+circle+pad+cover and glue it to your joystick. I used an epoxy resin because i figured it would do the best gluing plastic on plastic but super glue would probably work too. You should still buy a tri-wing screwdriver https://www.amazon.com/Gen-Lite-Tri-Wing-Triwing-Screwdriver-Tool/dp/B000VPBYS6/ref=sr_1_1?ie=UTF8&amp;qid=1479034061&amp;sr=8-1&amp;keywords=triwing+screwdriver and some wet-wipes to get inside the controller and clean up a bit. Mine works like brand new but even better because the joystick will never wear down. I'll never part with my original orange GC controller >.<
Is there any analog stick cover like this for the New 3DS XL but that I can close the 3DS completely?
They actually sell replacements on Amazon for the rubber piece for those inclined
https://www.amazon.com/gp/aw/d/B00UURTXK6/ref=ox_sc_act_image_2?smid=A3F4J0W0AYMIJX&amp;psc=1
I ordered these pad covers shortly after I bought my 3DS - https://www.amazon.com/gp/product/B00UURTXK6
Works like a charm, although some buyers are having issues with the covers themselves slipping off the pad. In that case try using super glue if you don't mind having a semi-permanent accessory.
I bought these, however they are a bit pricey for what they are, and I only really use one of them. But there isn't too much of a solution elsewhere from what I've found.
https://www.amazon.com/Pandaren-silicone-Protector-Hand-GRIP-New-Nintendo-3DS-old-version-3DS/dp/B01LKS7GVG/ref=sr_1_4?ie=UTF8&amp;qid=1496814439&amp;sr=8-4&amp;keywords=grip+for+new+3ds
this seems to be it, and there are also some plastic ones on amazon too.
https://www.amazon.com/Gam3Gear-Handle-Stand-Nintendo-Black/dp/B00WU8EEAC/ref=sr_1_5?ie=UTF8&amp;qid=1496814439&amp;sr=8-5&amp;keywords=grip+for+new+3ds
Link
Super cheap, but hooooly crap it made all the difference. I couldn't play Mario Kart for more than 10 minutes before I bought that, and after I got it I beat the game in like 2 days.
Here is the one I use. Works well, is comfortable, has a neat little stand that folds out the back. My only complaint is the bottom lip of it covers the game card slot so you have to take it off to change cards, although this isn't really an issue for me as most of my games are digital.
I was in a similar situation as you when I picked up one of Nintendo's refurbished N3DS systems last month. I was coming from a N3DS XL and had the Cyber Gadget grip for that; which I loved. Unfortunately, I found that tracking down non-XL N3DS accessories was not very easy. Additionally, I found that the Cyber Gadget version of the non-XL grip was outrageously expensive for what it was and couldn't be found anywhere from a non-3rd party seller. I checked just about everywhere from Amazon to eBay to PlayAsia, but no luck. I even tried Amazon Japan but no luck there either. I eventually just bit the bullet and decided to purchase one of the cheap ones on Amazon (this one). It isn't perfect, but for the price, I would buy it again and recommend it. It does its job of making the system easier to hold for longer play sessions which is exactly what I needed. Hope this helps!
I recently just got this one: https://www.amazon.com/gp/product/B00WU8EEAC/ref=oh_aui_detailpage_o03_s00?ie=UTF8&amp;psc=1
It is just plastic, but is cheap and fits the regular New N3DS. Had decent reviews. I haven't use it really yet, but think it will work well
I prefer the standard New 3DS myself. The size is great, bigger than the OG 3DS and smaller than the XLs. I still bought a grip, mostly to flesh out the thickness, and now it's really comfortable! The faceplates are nice too, I sticker bombed a set. A point that people will argue is screen size, I think the New 3DS's is fine and the XL is too big for the resolution. Also, screw the gloss on the New XL, it's a terrible finish. The pattern looks nice, but I just can't stand the feel. Some of the faceplates for the New 3DS are glossy, but I think every New 3DS bundle (at least in the US) comes with at least one set of matte plates.
Cover Plates 071 (Mario playing cards) for new Nintendo 3DS https://www.amazon.com/dp/B016XIA6QK/ref=cm_sw_r_cp_apa_ytvDyb77DEAKM
Here's an amazon link I pulled up from my phone
Were the "mario playing card" cover plates (these ones) always around ~$30?
I recall most cover plates hovering around $15-25 bucks a while back on amazon. Is this one "special" in some way or is the increased price due to the increase in demand (from the influx of regular n3ds owners)?
Aweek Charge Controller&Handle Grip Case for 3DS LL XL Host Rechargeable Protective Handle Grip with Working and Charging Indicator+USB Cable
I bought this and love it. It's got bumpers and triggers,and an internal battery to secondhandcharge your N3DSXL if you're running low. Super comfy. I also switched out the nub for a psp 1000 pad, it's so much fucking better that way. Only real downside is the bumpers are a bit loose as they don't have springs. But I just folded a bit of tape to the 3ds bumpers to lessen the gap.
Unfortunately it looks like it's unavailable from Amazon atm, but you might find it for sale from somewhere else by googling it.
You can get a normal Black/Blue/Red/other colour XL and then just get a full body decal for it?
Amazon has this new official Pikachu Decal from Hori but I see Amazon is out of stock atm....
But you can always check for Hard Covers that snap onto the 3DS as well
https://www.amazon.com/gp/aw/d/B01K6PGBA6/ref=sspa_mw_detail_6?ie=UTF8&amp;psc=1&amp;spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE2MVA0Sk01WFVGMkQmZW5jcnlwdGVkSWQ9QTAzODA2NTFUVUc0RDNPQ1dUUlcmZW5jcnlwdGVkQWRJZD1BMDM2Nzk1ODFBS08zNjg3RVdNUEsmd2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwmYWN0aW9uPWNsaWNrUmVkaXJlY3Q=
And I think you can get those little 24 in 1 cartridge holders to store extra games. Sadly they don't make 3ds carrying case with more than 24 slots. But if you're worried about the games only, I suggest this.
https://www.amazon.com/Butterfox-Storage-Holder-Nintendo-Switch/dp/B07146988L/ref=mp_s_a_1_9?keywords=3ds+cartridge+case&amp;qid=1565534848&amp;s=gateway&amp;sprefix=3ds+cartridge&amp;sr=8-9
Got a pair of Brendos for my 2DS XL and New 3DS XL. I'm happy with them.
Looking for a small case that will both fit the AC adapter and the Mumba hard case. So far I've found this Orzly case that will fit the switch with the Mumba case on, and this Butterfox case that will fit the AC adaptor, but haven't found one capable of doing both. Any suggestions?
Yep, it's basically a perfect fit, but it's close. I don't know if I could fit anything else in the zipper if a future accessory came out.
It appears mine is the one that says it has space for the official AC adapter:
Butterfox Nintendo Switch Carry Case with Storage Room for Official AC Adapter and 9 Game Cartridge Holders - Blue/Black https://www.amazon.ca/dp/B06Y4VXRJZ/ref=cm_sw_r_cp_api_RiGIzbKD019QH
Question on the Butterfox Cases. I was looking and noticed there's an updated version. I saw two links for the blue one:
https://www.amazon.com/ButterFox-Nintendo-Storage-Official-Adapter/dp/B06Y4VXRJZ/ref=sr_1_6?ie=UTF8&amp;qid=1506792185&amp;sr=8-6&amp;keywords=butterfox+switch+case
https://www.amazon.com/Updated-Nintendo-Carrying-Holders-Accessories/dp/B06WGSKRKL/ref=sr_1_10?ie=UTF8&amp;qid=1506792185&amp;sr=8-10&amp;keywords=butterfox+switch+case
The first link says "[Updated]" in the title, the second one doesn't. The first one is unavailable, the second one is available. Both seem to show the updated version. Am I correct in using the second link, or do I risk getting the older version with some of the flaws?
Hey, I've already got a switch case, so I'm not entering the giveaway. I do have a question on the case, though. From what I can see, this is functionally identical to a butterfox case, seen here. What makes it any different?
Hello all,
I've been scouring the search feature and Google and I have a hard time picturing which case works for me exactly. I am looking for a case that can hold the future Nyko Portable Docking Kit, an extra set of JoyCons and their wrist straps + original wrist straps (The Docking Kit comes with an HDMI, power cable and the AC adapter). I realize that this might be a stretch given that the Docking Kit isn't out, but for those with amazing spatial abilities, that would be grand!
I'm really trying to avoid a backpack or huge compartments, a single-handed carrying case would be ideal.
These are the few that I've been eyeing but kind of torn with.
Butterfox
Hard EVA
Orzly
Surge
Thoughts anyone?
I recommend a Butterfox case. It has plenty of storage for cartridges, extra joycons, straps and even an AC adapter.
https://www.amazon.com/dp/B06Y52CDHT/ref=cm_sw_r_cp_apip_AAVRuriKH657R
This is the one I use. It holds the console, two extra Joy Con, the charger, and nine games all pretty easily. May not be big enough for all your stuff though.
Found a case here that can hold 68 games total, but its a combination of switch and ds games. (48 3ds and 20 switch). I know its not quite what you wanted, but its still pretty close to what you were looking for though.
Absolutely love Butterfox, the girlfriend has the one you listed and loves it. I picked up this, in anticipation of an increasing switch library.
It only has 20 slots for the switch, but the 3DS pouches easily hold the switch cartridges snugly. My old 3DS game case ran out of slots, so this was a no-brainer buy for me.
Would recommend for anyone else that requires a 'hybrid' storage.
This not a hard plastic case, but it could hold 48 3ds/ds games. It could fit all of your current library, at least.
I haven't tried it myself, but I've had this bookmarked on Amazon for a while: Tomee Stylus Pen Set for New 3DS (3-Pack) https://www.amazon.com/dp/B07286FXB7/ref=cm_sw_r_cp_api_i_.opUCbM96KDGD
One of the set is a white one.
You can see in the customer photos that it is indeed for a standard sized N3DS. Unfortunately some people didn't read properly and also have pics of the stylus not fitting into a N3DS XL, O3DS, etc. Lol.
It is sooo hard to find good new 3ds stylus's (non-Xl). They essentially don't sell 1st party ones in the US, but these are good ones that dont have the issues many cheap stylus's have, mainly a sharp plastic line down the middle where the stylus touches the screen.
https://www.amazon.com/Tomee-Stylus-Pen-Set-3-Pack-nintendo/dp/B07286FXB7/ref=mp_s_a_1_1?keywords=new+3ds+stylus&amp;qid=1554345866&amp;s=gateway&amp;sr=8-1
Thanks for the response. I found these:
https://www.amazon.com/gp/aw/d/B07286FXB7?psc=1&amp;ref=yo_pop_mb_pd
The price was right. They are Amazon prime. They fit perfectly and provide a replacement for the white model, black model, and a nice red one that goes nicely with a couple faceplates.
This has been what I have been looking for. I have received them and verified that they fit perfectly into the non-XL sized New 3DS and shipped super quick stateside.
Confusingly, Butterfox has designed a couple of Switch cases that look almost identical, and there's a lot of separate product pages for color variations. This model, for example will fit the AC adapter, as the description notes. I believe there are also pure black, red accent, and blue accent versions, as well. Look for words like "updated" or "large model," and I think most of the product pages specifically mention fitting the AC adapter in the description.
I'd read the reviews also, though. I know a while back there were quite a few that did say the case fit everything as described, but they felt that putting the AC adapter brick into the case and zipping it up put undue pressure on the Switch's screen.
I got [this one] (https://www.amazon.com/Butterfox-Nintendo-Adapter-Cartridge-Accessories/dp/B07316FNJK/ref=sr_1_6?ie=UTF8&amp;qid=1523582818&amp;sr=8-6&amp;keywords=butterfox+switch+case).
It says that it can hold 29 games, but in my experience it can only hold 19.
Portable charger needed. If you don’t want to get a pro controller then I suggest you set a charging joycon grip. You gonna need a switch carrying case, I have this case
https://www.amazon.com/Butterfox-Nintendo-Adapter-Cartridge-Accessories/dp/B07316FNJK/ref=sr_1_3?ie=UTF8&amp;qid=1525222612&amp;sr=8-3&amp;keywords=nintendo+switch+butterfox+case
I am not currently using a case, just using the grip and cover from here.
https://www.amazon.com/Updated-Hand-Nintendo-Stylus-Clear/dp/B075YP1CTH
&#x200B;
I find is pretty uncomfortable to play my 2dsxl for long periods of time without the grip and will give up the extra portability to have it. The grip and cover protect is fairly well. my only concern would be the shoulder buttons. I also have one of the cases linked below. I really don't like how bulky it makes the whole package. All of my games are digital so I dont need the extra storage provided.
http://www.amazon.com/gp/aw/d/B00C1XYUY6?pc_redir=1413541358&amp;robot_redir=1
You're welcome.
I bought these and they arrived today; this is the newer version of the product that you purchased. I had no issues getting them on my analog slider; they may not seem to fit at first glance and first touch, as it does take a bit of pressure and force to get them to fit properly, but after applying a fair bit of pressure onto them they will go on and stay on, and they work excellently (I have an original 3DS by the way (not XL nor new). I don't know if the newer 3DS versions have bigger sliders or not, but these seem to be made for the New 3DS yet fit fine on my old, non-XL version. They are fantastic; I use the grip with the various dots on it, and it really allows me to grip the slider extremely well. I don't have to worry about my thumb sliding off of the slider as I had to do before; using these also has greatly increased the precision with which I can use the slider stick. I can now make very subtle moves of the stick very easily with the grip. All in all, I would recommend the newer version of these grips, as they have done an excellent job of increasing the control and precision I have over my slider stick and have completely eliminated the previous soreness that my thumb would have after a 3DS playing session. I think that they are a necessity for any hardcore 3DS player who plays often.
This is what you need. You can keep these on and close the lid as well.
This is the one I have for taking just the system (no dock), one set of joycons, a charger, and some games (up to 9 physical ones) with me to campus: https://www.amazon.com/gp/product/B06Y52CDHT/ref=oh_aui_detailpage_o02_s00?ie=UTF8&amp;psc=1
Choose my case poll!
Which one? Caseology, Hori, or Butterfox?
https://www.amazon.ca/gp/product/B01MR63I6F/ref=ox_sc_act_title_1?smid=A3DWYIK6Y9EEQB&amp;psc=1
or
https://www.amazon.ca/gp/product/B072M8GMDZ/ref=ox_sc_act_title_3?smid=A2R61ADP3X9T44&amp;psc=1
or
https://www.amazon.ca/gp/product/B06Y52CDHT/ref=ox_sc_act_title_2?smid=A2SKJWZFXSLPUZ&amp;psc=1