Best greenhouse ventilation equipment according to redditors
We found 135 Reddit comments discussing the best greenhouse ventilation equipment. We ranked the 10 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 135 Reddit comments discussing the best greenhouse ventilation equipment. We ranked the 10 resulting products by number of redditors who mentioned them. Here are the top 20.
These carbon filters are used mostly in commercial spaces. In the United States they are commonly found in marijuana grow houses to move air outside. A carbon filter removes a high percentage of odors to reduce the risk of detection.
I like them in my home because I'm not a fan of buying other scented products that "mask" smells. When I walk into my home and my carbon filter is on it smells clean. I'm not sure if that clean smell is due to something from the carbon? Either way it's a clean, crisp smell that many people comment on and cannot be replicated by chemicals.
Cons: inline fans are loud and the system is a little bulky. Noise can be reduced by adding ducting to the end or buying insulated fans as referenced below.
Pros: I breath amazing air. You can cook/smoke inside your home and it's still going to smell amazing!
Filter: https://www.amazon.com/gp/aw/d/B008NYF8S4/ref=ya_aw_od_pi?ie=UTF8&psc=1
Quiet fan: https://www.amazon.com/gp/aw/d/B00EIRU2YU/ref=ya_aw_od_pi?ie=UTF8&psc=1
> I am choosing to leave out side lights from my first build to reduce the amount of variables that may give me electrical/heat issues. Will this significantly affect my yield to the point where I should be seriously reconsidering this decision?
Not really. The sidelights are a nice and cheap upgrade, but probably affects more trichome production than yield.
> Which of those two fans do you think will work better for me? If these are both horrible, what other fans should I be looking at? I am looking at doing a DIY carbon filter since it seems to be pretty straightforward. What sort of DIY carbon filters do you suggest? How powerful should fans be to deal with a carbon filter in a standard-size space bucket?
Its really hard to recommend those small fans for filters, my advice would be to get an inline fan and filter and not overcomplicate things. ONA gel is also a good solution for odors.
> I am using white buckets rather than mylar because it seems white buckets work fine and mylar can create hot spots. Is this accurate?
White buckets are a fine choice, but mylar does not create hot spots. That is a myth. Check /r/HandsOnComplexity for the science behind that.
> I've read that buckets are much cheaper at stores than they are on Amazon. Around how much should I be spending for 4x white 5 gallon buckets? Are there any other items in my build that I can get for cheaper in person?
Try to get them for free. I've never paid for a 5gal bucket. At least in my city there are a lot of 5gal buckets near construction sites, to give one example. You just have to know where to look.
> I am planning on ordering seeds from Nirvana. Is this a good vendor or is there a different one that I should be using?
Should be OK, most big vendors are fine.
> I've found plenty of resources about space buckets on this subreddit and the website, but not much on the actual process of growing Marijuana inside of a space bucket. Apart from the setup, is there any difference in the process of growing Marijuana inside of a space bucket and growing it another way? Is there any sort of guide or subreddit dedicated to what's needed to go from seed to harvest you can point me towards?
Check the bucket plant guide for tips from the community. The best kind of experience will be your first hand experience. You should expect to kill some plants before mastering the proccess. In a Space Bucket, the main challenge is keeping the plant as short as possible. If you keep it low the lighting will be more effective, and the flowers more awesome.
> Any general advice? Anything I'm missing?
Yes, don't forget to update us and to have fun! Welcome to the community.
What you're smelling is the terpenes, the volatile aromatic compounds present in cannabis. They provide the taste, aroma, and synergistic effects present in cannabis. You could, if you were so inclined, put your flower in a vacuum chamber and pull all those terps off. It would smell like grass, taste like ass, and not be as pleasant effect-wise, but it would get rid of the smell. Try a dry-herb vape. There's still smell, but it's a lot less. Or, put one of these in your smoking area: https://www.amazon.com/VIVOSUN-Air-Filtration-Kit-Controller/dp/B06XFRNPR8/ref=pd_lpo_sbs_86_img_1/143-0726135-2560430?_encoding=UTF8&psc=1&refRID=PP2EZ1QZN61VNVCEGBSN
ODOR BE GONE!
Yep! I use this one. I considered the one you linked, but got the metal one simply because it was cheaper at the time. Both would get the job done.
I have it connected to my k40 via 4" dryer hose and this flange hose fitting which fits perfectly in the slot on the back of the k40.
Used these clamps to secure the dryer tubing together.
As far as how well it works, I'm pretty satisfied. I have the exhaust blowing out a 4" fitting attached to a board I close in my window. I smell a little bit of burnt wood when cutting, but it's very minute. Almost all smoke goes out the window. The suction is very good, if I'm cutting card stock it occasionally sucks the small paper pieces right off the cutting bed. When I'm doing laser alignments, it almost completely eliminates the smell of burning masking tape during test firing even with the door open.
More Pics: In Tent - Height - Stem - Bud
Pretty much stopped growing vertical (an inch or 2 since last update) but filling out nicely.
Some yellow showing on tips, but not too concerned at this point as she looks to be doing fine. I noticed roots at the top of the soil and had about an inch of room for more substrate, so topped it up.
She is drinking a lot now, almost daily feedings of about 3 liters.
Day 1 -
Day 5 -
Day 10 - Day 15 - Day 20 - Day 25 - Day 30 - Day 35 - Day 40 - Day 45 - Day 50 - Day 55 - [Day 60]()
Seeds: White Widow Autoflower
Substrate: Sunshine Mix 4 Soiless
Nutrients: Green Planet Medi One Kit & CM Plus
Lights: Meizhi 300w + Mix 2700k/6500k CFL's
Grow Tent: Costway 32" x 32" x 63"
Ventilation: VIVOSUN 4" Air Filtration Kit
Plant Height: 27" / 68.5cm
Light Cycle: 24 hour
Pots: Fabric grocery bag (Approx 5 gal)
Temp: 22c - 24c
Humidity: 40%
In my experience, those in-line vent fans don't have the design to effectively push or pull through filters and containers. They're also called booster fans because they are meant to maintain airflow in the weak areas of air systems, but with laminar incoming flow and little restriction to input and output.
I'd recommend something like this. Should work for a few LED 5 gallon buckets imo.
4 inch blower
If you're talking about several large tote or trash buckets, I would step up to 6 inch blowers of the same design. You can see from the impeller design in some pictures that they are intended for blowing through filters and pulling through restrictive airspaces.
Good luck!
I use this:
https://www.amazon.com/iPower-Inline-Carbon-Ducting-Ventilation/dp/B00D7M6692
Congrats on finding the seeds and getting this far. If you are a first time grower, then I would highly recommend a controlled environment starting with a tent. I have done it both ways, and outdoor seasonally, and you will benefit a lot from having a confined space you can control as you learn. Contrary to popular belief, it isnt "just a weed that grows". To have a quality finished product you need a good amount of time and energy spent on the plants. However, because the growth takes time, as a first time grower, you can purchase the items you need as you need them to build out your grow. I have purchased a lot of my items on amazon, so I will provide some links to items I vouch for personally.
​
​
I would start with a light and good soil. This is one of the most important items by far. For indoor, use LED, or a combo of T5 for veg and then LED for flower.t5: https://www.amazon.com/gp/product/B01M624OCR/ref=crt_ewc_title_oth_1?ie=UTF8&psc=1&smid=A1KBVFFLR1WEMK
LED: https://www.amazon.com/dp/B0185OLBPK/ref=sspa_dk_detail_10?psc=1&pd_rd_i=B0185OLBPK
I have both of these products and can finish 4 plants in a tent nicely in about 100 days. I know people have feelings about using off brand lights but I have had zero issues, ever. On thing to do though is to not let the plants grow too tall. Rather train them to grow like bushes by topping them early and continuing to top the new nodes at a reasonable height, Id suggest 30 inches max (from top of the pot).
Also buy this : https://www.amazon.com/General-Hydroponics-pH-Control-Kit/dp/B000BNKWZY/ref=pd_sim_86_7?_encoding=UTF8&pd_rd_i=B000BNKWZY&pd_rd_r=5185d750-c735-11e8-83ba-35492fd40af5&pd_rd_w=FfWzV&pd_rd_wg=5opTv&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=5TDAFKEPVRHZC2TKYA3F&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=5TDAFKEPVRHZC2TKYA3F
AND LEARN ABOUT pH!!!! Many young growers don't do this and it makes a HUGE difference.
For veg, you will be able to get by a few weeks or maybe a month without a tent, but the light will become annoying.
For soil. I highly recommend mixing fox farms happy frog and ocean forest. This will prevent you needing to use fertilizers really at all until flower time. Yes it is kind of expensive, but it is worth it. I have tried the experiment of making soil myself... it becomes outrageously priced so fast and unless you are really good at chemistry/botany you can totally fuck some shit up. Trust the fox farms soil. It is the best IMO. Also, I am a huge fan of cloth bags. I suggest these:
https://www.amazon.com/VIVOSUN-5-Pack-Thickened-Nonwoven-Handles/dp/B00TF9E6XE/ref=pd_sim_60_7?_encoding=UTF8&pd_rd_i=B00TF9E6XE&pd_rd_r=fb2641f0-c736-11e8-8198-7d964bea5356&pd_rd_w=GtDju&pd_rd_wg=aCJer&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=H05JF866M3Z3Y0MEV2JX&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=H05JF866M3Z3Y0MEV2JX
So a tent should be your next purchase.
I have two of these and they do a great job.Tent: https://www.amazon.com/gp/product/B06XJQ8LPY/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
Shortly after getting the tent set up you need to get an oscillating fan and some regulators to tell you temp, humidity, etc.
regulator: https://www.amazon.com/AcuRite-Humidity-Thermometer-Hygrometer-Indicator/dp/B0013BKDO8/ref=pd_sim_86_6?_encoding=UTF8&pd_rd_i=B0013BKDO8&pd_rd_r=5185d750-c735-11e8-83ba-35492fd40af5&pd_rd_w=FfWzV&pd_rd_wg=5opTv&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=5TDAFKEPVRHZC2TKYA3F&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=5TDAFKEPVRHZC2TKYA3F
​
Now even in veg, your plants are going to begin to smell. But by flower time you will have a real problem on your hands, even with a tent. So next you will need a carbon scrubber. I use this one off amazon for a tent and have zero complaints while the tent is closed. I also have the filter hanging in the tent and venting out the side into the attic of my rental. Zero smell, unless the tent is open (which you will want to do in the beginning, but over time you will learn to not go in everyday unless you need to). With this item, every other grow you need to replace just the carbon canister part of it. It is easy to do and worth every penny.
Carbon scrubber:
https://www.amazon.com/gp/product/B06XFRNPR8/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
​
Buying all this over time is pretty easy, even on a conservative budget.
Hope this helps!
​
A garage is a good choice as long as it's not freezing in there when you're operating the printer. Most resins need to be between 30 to 40C to cure optimally. Some printers have heaters specifically to keep the resin nice and fluid. So, bear that in mind when you make your choice.
I honestly don't know how dangerous the fumes are, but you won't want to breathe it after you sniff it anyway. Most UV resin has a burned plastic-like smell. It is fairly acrid and no one recommends breathing it, of course. I personally find it pretty intolerable.
That said, the fumes are easy to control if you choose a sealed machine (one without any holes in the case) such as the Peopoly Moai. Sealed machines can sit with resin in the vat essentially forever without leaking any fumes, which means you don't need to have active ventilation on the machine while it's printing or just sitting idle. Machines that do have ventilation, such as the Anycubic Photon, will require either a well-ventilated room (again, a garage is ideal) or they'll need to be connected to a duct to a window while in operation. You can cover the vents on most of those machines when the machine isn't in use.
Most of the fumes that you'll be exposed to are during clean up when you remove parts from the build plate and wash them in isopropyl alcohol or methanol to remove the uncured resin. This is a messy, smelly, and slightly dangerous business that involves sharp blades and splashing. Some people like to wear a respirator for this. I don't use a respirator, but only because I have a fairly powerful ventilation system. I keep my SLA printer in a small 10'x10' repurposed bedroom which normally has terrible ventilation, so I operate a 6" inline duct HVAC fan with a duct to a window. That fan easily clears the air in the room in just a few minutes. And if I run the duct directly over my cleaning vats, I can't even smell the alcohol fumes. So if you're going to do your cleanup in a small area like that, then I highly recommend some kind of ducted ventilation system.
Your cleaning station can also be tailored to contain fumes. I highly suggest buying at least three cheap rectangular 1-gallon tupperware containers with tight lids (like these). Use one of them as a drip-tray while removing parts from the build plate, use a second for alcohol cleaning, and use a third for water rinse. The lids will keep the fumes contained, and it'll save your alcohol from evaporating. It's cheap and effective.
Just a side note, during cleanup, it's absolutely mandatory to wear eye protection and disposable gloves. Get used to idea of using a lot of gloves. I buy them in lots of 1000.
For those of you who would be willing to spend 200$ to not have to go outside. Put one in my workshop in the basement, works like a charm. If you dont care send smelly weed smoke out your window you only need the inline fan and duct
https://www.amazon.ca/VIVOSUN-Air-Filtration-Kit-Controller/dp/B06XFRNPR8/ref=mp_s_a_1_3?keywords=carbon+filter+fan+combo&qid=1567949397&s=gateway&sprefix=carbon+filter&sr=8-3
I see a lot of the ventilation mods for the Photon using the printed backplate for a 4" dryer hose.My wife cannot stand the smell of the resins, and is also very concerned about the long term health effects. So I'm building an enclosure as cheaply as I can.
I've sealed up an Ikea Lixhult ($40) and cut out a 4" hole to attach a hose. I'm probably going to buy the Vivosun Air Filtration Kit as the extractor.
Here's the progress so far.
I used a 6" filter that worked nice for me, I'm sure they have a 4" version
https://www.amazon.com/gp/product/B008NYF8S4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
You want a centrifugal fan, not a duct booster. 192cfm is the smallest sized fan you can buy that is centrifugal.
This is a centrifugal fan, 4" 192cfm
The issue with those duct booster fans is they do not create enough static pressure to pull through a carbon filter, or to create enough airflow in longer ducting lines or when there's bends in the ducting.
4 different ones.
lights
https://www.amazon.com/gp/product/B07C59J8L2
https://www.amazon.com/gp/product/B01IVQ96WW
https://www.amazon.com/gp/product/B01IVQ96MW
https://www.amazon.com/gp/product/B015FLSOCE
fans
https://www.amazon.com/gp/product/B07D8ZC566
https://www.amazon.com/gp/product/B00I8Q30SC
clip fan
other stuffs
Frog soil
Smart pots - half 3 gallon half 5 gallon
Advanced nutrients nutrients
hygrometer: https://www.amazon.com/SensorPush-Wireless-Thermometer-Hygrometer-Android/dp/B01AEQ9X9I/
6 inch intake fan from home depot
filter: https://www.amazon.com/gp/product/B008NYF8S4
filter fan: https://www.amazon.com/gp/product/B01CTM0JF2
strains
1 white widow
1 amnesia haze
2 money bush
2 jack herrer
DETAILS ON SET UP
Light: Roleadro 300W LED light
Fan and filter: ipower 4" inline fan with carbon filter (my roomates are worried about the smell
Tent: Millard 30" x 18" x 36" tent
Odds and ends: A digital timer to schedule lights
A fan speed controller
3-gallon smart pots
A humidity and temp sensor
Plus a small clip on fan.
GROW DETAILS
I have three different strains, Northern Lights, Pre-99 big bud, and pure power plant, and then an unknown seed(which I planted about two weeks ago as the previous unknown seed turned out male, see previous post [here](https://www.reddit.com/r/microgrowery/comments/5qo1yo/early_sign_of_balls_details_in_comments/0. One in each 3-gallon smart pot. For the first two weeks of growing I had an 18/6 light schedule, and then switched to 12/12. (I'm essentially doing 12/12 from as early as the plant could respond to the change in light schedule). Over the past 15 days I watered twice with tiger bloom nutes.
I definitely made the mistake of not listening to your advice when I originally posted and am trying to grow 3 plants in a 1.5X2.5X3 foot tent...It is getting crowded, I should've listened and stuck with one, maybe two plants. Other than that I haven't had any problem that I have noticed other then a few spots of damage on leaves occasionally but no pests or wilting. I'm sure there are things I could've done better though. Thank you for all your help, I can't wait to get to harvest.
Personal experience here -- the iPower 4 inch filter / inline fan combo didn't work very well at all for me. My entire garage smelled like herb.
What I have now, although was a bit more pricey:
Phresh 701005 Carbon Air Filter, 6 by 16-Inch, 400 CFM
Vortex 347 CFM S Line S-600 Fan, 6"
iPower 6 Inch 25 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose for HVAC Ventilation, 2 Clamps included
CARTMAN 1" x 12' Lashing Straps up to 600lbs, 6pk in Carry Bag
 
Here's how it looks:
Grow Tent
Get one of these units made for scrubbing the smell from weed growing. It'll clean that nasty air up with a quickness.
https://www.amazon.com/VIVOSUN-Inline-Controller-Ducting-Ventilation/dp/B01NA07G79/ref=mp_s_a_1_3?keywords=6+inline+fan+carbon+filter+combo&qid=1575038754&sprefix=6%22+inline+fa&sr=8-3
I would have to say yeah, slightly, if you're not willing to do anything at all about it. How much effort you're willing to go through is up to you, but I'll throw out a few suggestions, from low effort to ludicrous:
-try from different places on your balcony, although it's difficult to predict wind against a building.
-smoke out of a different window
-smoke into your range hood or bathroom exhaust fan
-any of the above plus a fan to blow the smoke farther/better
-add a HEPA filter to the fan
-some kind of personal air filter like the smoke buddy
-hack together a tube with fan and activated charcoal (diy version of below)
-blow your smoke through something like this bad boy: https://www.amazon.com/VIVOSUN-Air-Filtration-Kit-Controller/dp/B06XFRNPR8
(maybe they'll even pay for it, I know I probably would cough up a hundred bucks to permanently abate a nuisance that bothered me multiple times a day)
A proper setup should be able to get rid of any smells, but that wouldn't be a sandwich-sized sponge and your usual 120mm computer case fan. In order for this to work you will need a radial fan and a proper filter like this set. Something smaller would certainly do, but I've never seen anything under 4" diameter.
They key is getting something that provides enough suction toward the exhaust so all the other openings and cracks in the photon's case don't leak any gas. This will in turn increase the volume of your whole setup. Sleeping next to it might be difficult. There's solutions for that, too, if you're willing to spend the time and money.
Given that there's no such thing as a BIFL filtration system of any kind, the DIY recommendations here are rather reasonable. I quite like the furnace filter + box fan suggestion.
If you want something a little more robust, look into getting a carbon filter and a fan to go with it. I think the usual recommendation for carbon filters is for 24/7 use they need replaced every year or two. Here's one on amazon that you could use with a 6 inch fan which would add pretty good circulation for a large room: http://www.amazon.com/iPower-GLFILT6M-Control-Australia-Charcoal/dp/B008NYF8S4/ref=sr_1_2?ie=UTF8&qid=1396198801&sr=8-2&keywords=carbon+filter
This one comes with a fan: http://www.amazon.com/VenTech-IF6CF620-Inline-Virgin-Charcoal/dp/B0052ZPMAG/ref=sr_1_5?ie=UTF8&qid=1396198801&sr=8-5&keywords=carbon+filter
Not that great of a deal, but still: iPower GLFILT6M Air Carbon Filter and Odor Control with 1050+ IAV Australia Virgin Charcoal for Inline Fan, 6-Inch, Pre-filter Included, Reversible Flange https://www.amazon.com/dp/B008NYF8S4/ref=cm_sw_r_cp_api_fPozzbEXNQYCV
I have that Variac and vortex combo and love it; look for the amazon used section I pick it up for 110 instead. I have this fan and it works wonderful for a 2 x 4 tent PACKED TO THE FUCKING BRIM with plants. Tis cheaper. Edit: it's the one you linked... woops!
I'm just tossing it out there that you can pay with amazon prime card on rapid LED and get this vastly superior light I was told of tonight. I used the prime credit card to get LEDs there. ;)
What are you going to put the plants in?
A small 6 inch carbon filter with intake. I actually used this brand and many of their larger sizes. Intake should be 6" and cost appx. $40, worth it , electric is minimal clears the air of your whole apt (if under 600) you will actually notice cleaner air (I'm in LA and these have always made a diff from my small college apt by the freeway to the house I live in the hills now, would never grow without a nice carbon filter set up even when I move to Mendocino (Plus They create a nice ambient sound, increase C02 (bud size) and you should cut down on mold issues) not sure what part of the world you are in but filters in humid or arid, small or large grow, are key and worth the small investment for several reasons) If you're skeptical do some research.
https://www.amazon.com/iPower-Charcoal-Prefilter-Included-Reversible/dp/B008NYF8S4/ref=sr_1_3?ie=UTF8&qid=1501722851&sr=8-3&keywords=6+carbon+filter
CFM won't matter regarding if it can push air through the filter. What you want to look for is the static pressure rating of the fan. It will be in the unit of mmH2O. Try to get a fan rated at 6 mmH2O or greater. Basically, the motor must be strong enough to push air through a thicker medium like a filter.
My fan (Delta AFB1212HHE-F00) is a 120mm PC fan rated at 9mmH2O and 120 CFM. My other fan (Scythe Kaze 3000) is also 120mm PC fan rated at 6mmH2O and 133 CFM. Both push through my homemade carbon scrubber.
Also, from what I've read, you don't want to use a carbon 'fabric' like those sheets. They wear out quite quickly and making a filter from small activated carbon granules would be superior. You might be able to find one relatively cheap like this. You could attach a 6-to-4 inch rubber reducer like this and let it sit on top of your fan on the cabinet. I made my scrubber out of an atrium grate, pantyhose, rubber reducer and the carbon and it sits right on top of my bucket with no need to seal around it as the air pushes through nicely with not much back pressure.
I have a 6" fan. This filter works great. $62 bucks.
https://www.amazon.com/gp/product/B008NYF8S4/ref=oh_aui_detailpage_o09_s02?ie=UTF8&psc=1
Air cleaner -
https://www.amazon.com/Honeywell-AirGenius5-Cleaner-Odor-Reducer/dp/B009P7SVHS/ref=sr_1_12?s=home-garden&ie=UTF8&qid=1492533232&sr=1-12&keywords=honeywell+air+purifier
Ozone Purifier - https://www.amazon.com/gp/product/B012OW48M2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Exhaust Fan -
https://www.amazon.com/gp/product/B009LCEUEK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
You are correct. It is your fan.
You should look into upgrading it to something like this
Thanks for the explanation, I guess I kind of already knew this but just wasn't sure. This is exactly what I was looking for!
Normally I have 4 inch inline going during the day, but it currently turns off at night... I know I need to change it to always on. And a 6 inch circular that is always on and not facing them. The inline makes a good breeze where the intake is next to the bigger plant
190 This is the set up I have -> https://www.amazon.com/iPower-GLFANXINL4FILT4MD8C-Exhausting-Pre-Filter-Reversible/dp/B00D7M6692/ref=pd_sbs_86_4?_encoding=UTF8&pd_rd_i=B00D7M6692&pd_rd_r=R4ZFDEF7DG5NTXY0S5EE&pd_rd_w=mOSJj&pd_rd_wg=dUnyB&refRID=R4ZFDEF7DG5NTXY0S5EE&th=1
Here is the cheapest all in one package on amazon. Fan is 190 cft and 48 decibels. https://www.amazon.com/iPower-GLFANXINL4FILT4MD8C-Exhausting-Pre-Filter-Reversible/dp/B00D7M6692/ref=sr_1_1?ie=UTF8&qid=1497493628&sr=8-1&keywords=duct+fan+carbon+filter You would probably want a fan speed controller with this too.
Well, I wouldn't buy a tent kit/package. You could go with a 24"x24" tent like this one then buy your light and carbon filter/inline fan seperate.
iPower is a good inexpensive brand to start with for your fan/filter. A 4" fan is more than enough for that size.
As for your light a Quantum board leds are the most efficient lights out now but Cobs (chip on board) are great too.
Add a little clip fan for air circulation and you're all set!
I got this off of Amazon a couple of weeks ago and my wife is smoking in my tent using it. I can stand a foot away from it while she's bonging out and not smell a thing. I like it so much I bought another one so she can keep her 'smoke shack' and I can use the new tent and filter system as my flower room https://www.amazon.com/iPower-Inline-Carbon-Ducting-Ventilation/dp/B00D7M6692/ref=sr_1_3?ie=UTF8&qid=1536844206&sr=8-3&keywords=4%22+carbon+filter+system
Most run a charcoal filter with a fan
Hello there, I recently started growing and purchased all new items. The fan you chose simply won't work. You will be very disappointed in the performance. I was going to use that fan as an inflow booster with a pre-filter. I quickly returned it because it just did not move enough air. The fan could not create positive pressure in the tent. I then tried this fan: https://www.amazon.com/gp/aw/d/B01M7S46YZ/ref=mp_s_a_1_3?ie=UTF8&qid=1495901534&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=4+inch+inline+fan&dpPl=1&dpID=41G0I96VBVL&ref=plSrch
I ended up returning that one as well because it was advertised as 200cfm and it was not moving anywhere near the same air amount as the first fan I bought. I then broke down and bought the same fan I originally purchased as my outflow fan and filter. I bought just the fan for 56.00 as an inflow fan and put a pre-filter on it.
https://www.amazon.com/gp/aw/d/B00D7M6692/ref=mp_s_a_1_1?ie=UTF8&qid=1495901249&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=4+inch+inline+fan+carbon+filter+combo&dpPl=1&dpID=51REkA1uNbL&ref=plSrch
https://www.amazon.com/gp/aw/d/B00D7M6692/ref=sspa_mw_detail_6?ie=UTF8&psc=1
since the shelves are adjustable (although it is kinda annoying so not something you do all the time) you could leave like 3ft on the bottom and grow like 2 plants there full time if you want. But you will want a different / stronger light for flowering. or you can just move them outside when they are big, sun is free.
The led shoplights are mostly just for starting, that would be your middle shelves. usually like a month or so for seed to sprouts or rooting clones.
but there is no point growing tons of starter plants if you don't have room for them when they are bigger =]
mature plants can get large 3ft x 5ft easy. but you can trim them to fit whatever space you want. (see small /r/spacebuckets setups, to huge /r/outdoorgrowing plants)
an inline fan with flexible tubing and air filter (if you are flowering and dont want it to smell outside your shed much) is easy to place if you have some vent or opening somewhere in the shed.
https://www.amazon.com/VIVOSUN-Hydroponic-Observation-Window-Growing/dp/B01731MNJE/ref=sr_1_3?ie=UTF8&qid=1549018765&sr=8-3&keywords=4x4+tent A 4x4 is your standard size.
It depends on the size pot. You can get 6-1 gallon pots in their easy. 6 -5 gallon pots is pushing it.
​
6 inch fan and filter kit. If you get bigger tent. Great you got a fan that works. You can always get the 4 inch version
https://www.amazon.com/VIVOSUN-Air-Filtration-Kit-Controller/dp/B01NA07G79/ref=pd_rhf_dp_s_zg_dy_0_1/143-7349115-2913520?_encoding=UTF8&pd_rd_i=B06XFRNPR8&pd_rd_r=47a007ed-9d8e-4121-b854-6d1e70ce79f7&pd_rd_w=WapH9&pd_rd_wg=7MaPN&pf_rd_p=4022e0f2-c06e-4e9e-bb48-d7486d1197f7&pf_rd_r=SP1Z1FSN019N7KNHMVF2&refRID=SP1Z1FSN019N7KNHMVF2&th=1
​
Quantum boards are the in thing right now. But there several other excellent LED companies.
Depending on your budget.
https://horticulturelightinggroup.com/
https://opticledgrowlights.com/
https://spectrumkingled.com/
https://www.rapidled.com
https://www.rapidled.com
https://chilledgrowlights.com/
can you afford spending $100?
​
I used to have a 6" carbon filter and a inline fan standing in my kitchen for whenever I wanted a smoke. just crack open the window and let the exhaust out, it works great with flower and tobacco leaving no lingering smells in the house
Everything is on Amazon, though I'm in Canada so it's .ca but they have clearly been prepping for this for some time.
I'm allowed 4 plants so I am growing 2 different strains. I am using LED lighting and I have a self-contained tent as well as a carbon filter and fan for ventilation. I am starting in soil but might eventually move to hydroponics.
https://www.amazon.ca/gp/product/B072F6SPB1/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B01731MNJE/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B06XFRNPR8/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
The exhaust is 4'' x 14''..
My budget has been pretty tight due to unexpected medical bills, that's the only reason I was hoping to make due with a 4" filtration system. That's a solid suggestion though and I may be able to cut some corners elsewhere to make that work.
Depending on your fan, you may be able to adjust the fan speed to reduce noise -- either via a built-in controller or an external one. There are cheap motor controllers that reduce a fan speed by flipping the power on/off really quickly. Those can be hard on the fan motor and/or create loud buzzing at lower speeds. You can also get a variable voltage controllers that works by smoothly reducing the overall voltage. Those cost a little bit more, but work much better. Since they're serious industrial equipment, they also probably have better resale value.
About smell, you could run an extra carbon filter on a freestanding inline fan to scrub the air outside the tents. (Really cheap ones should be fine for that.) A HEPA air filter/ionizer or other things could help, too.
Keep in mind that you'll probably have the tent(s) open for a while during harvest, when everything is at its smelliest. I didn't cover vents during my first harvest, and the smell had all the subtlety of a flying saucer landing. (I'm in a legal state, but would still rather not annoy people with skunkiness!)
Hi there. I went with that combo because some of the cheaper combos had pretty poor ratings on FakeSpot, but that's really the only reason. If you have a cheaper (and reliable) combo, I'd certainly take a look!
Okay. Do you think I would be sacrificing any "noob-friendliness" by ditching the peat pellets on my first go? I know you can just dump the seed into the medium, but I want to "get it right" my first time and reduce the margin of error. Maybe I'm overthinking it.
EDIT: Would these two work instead of the combo I had?
https://www.amazon.com/dp/B07D8TZ2KV/?coliid=I190I6ZPDD0E93&colid=WARD1BGFR803&psc=0&ref_=lv_ov_lig_dp_it
https://www.amazon.com/dp/B00EPE3XHY/?coliid=I1X2Q9SFFQF5I8&colid=WARD1BGFR803&psc=0&ref_=lv_ov_lig_dp_it
I’ve started to think about taking one of these and some dryer ducting in order to make a ghetto fume extractor: https://www.amazon.com/iPower-GLFANXINLINE6V2-Inline-Ventilation-Certified/dp/B07VKV2363
For just a little more money you can get an actual inline fan
https://www.amazon.com/iPower-Inline-Ventilation-Exhaust-Grounded/dp/B0085GTELM/ref=sr_1_2?ie=UTF8&qid=1535907609&sr=8-2&keywords=inline+vent+fan+4+inch
just get this: https://www.amazon.com/iPower-Inline-Ventilation-Exhaust-Grounded/dp/B0085GTELM/ref=sr_1_6?ie=UTF8&qid=1536940995&sr=8-6&keywords=4+inch+inline+fan
then get the ducting in a separate order. if you can I'd recommend getting solid steel ducting from your local home depot. the loose stuff makes your fan much less efficient
So. I could put a cooling tube http://www.amazon.ca/Apollo-Horticulture-GLK600CT24E-Digital-Dimmable/dp/B00521B894/ref=sr_1_3?ie=UTF8&qid=1427552022&sr=8-3&keywords=600+watt+hps run it horizontally (front to back) with the booster fan only for the tube. Then run an actual fan http://www.amazon.ca/iPower-GLFANXINLINE4-Ducting-Hydroponics-Applications/dp/B0085GTELM/ref=sr_1_5?s=lawn-garden&ie=UTF8&qid=1427552199&sr=1-5&keywords=fan with filter for smell venting? I want get away from building a glass enclosure for the light, hence the cooling tube or full hood, want.
Would this work with http://www.amazon.ca/iPower-GLFANXINLINE4-Ducting-Hydroponics-Applications/dp/B0085GTELM/ref=sr_1_5?s=lawn-garden&ie=UTF8&qid=1425255580&sr=1-5 ??
keep in mind that this is all new to me so don't necessarily take my recommendation because I don't have a lot of experience. I'm also in Canada so have to use amazon.ca, not amazon.com which gives us less selection. The one I got is 175CFM and I paid $112CAD. https://www.amazon.ca/gp/product/B0085GTELM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
What size fan (cfm)? What size ducting? I used this carbon filter in my 2x4x5 tent with a 6" 400 cfm inline fan. Worked great.
Yea some filters are just poor quality especially the small ones. I run this filter and it's worked great. http://www.amazon.com/iPower-GLFILT6M-Australia-Pre-filter-Reversible/dp/B008NYF8S4 it's also able to be flipped.
No, that’s crazy expensive. You want a cylinder like this https://www.amazon.com/iPower-Scrubber-Australia-Reversible-Prefilter/dp/B008NYF8S4/ref=mp_s_a_1_3?ie=UTF8&qid=1549037948&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=ipower+6+inch+carbon+filter&dpPl=1&dpID=51gvYylKTpL&ref=plSrch
Here is how I do it. Tent on right gets first air ( the coldest and driest as it's for flowering ) air moves to second tent ( the air is warmer and more humid now, ideal for vegging flowers),the air moves into the dry tent,which usually has it's own dehumidifier. Finally exhausting thru a carbon filter back into the room.
https://imgur.com/a/IkN2T9W
I hope this inspires ideas. It wont smell like cannabis in the exhaust air until like 2 weeks into floweing, from that point it progressively gets WAY stronger. I highly advise a carbon filter if you want stealth. I found this to work amazing ( iPower GLFILT6M 6 Inch Air Carbon Filter Odor Control Scrubber with Australia Virgin Charcoal for Inline Fan, Reversible Flange, Prefilter Included https://www.amazon.com/dp/B008NYF8S4/ref=cm_sw_r_cp_apa_i_J3bWDbSH6F9XR )
hope this all helps you 😎
Why do you want to inline it?
And if you want to inline it, why not buy a regular filter and put it in a box and be done with it? For 2 tents you can get away with a fairly cheap filter for below 50$
Take this random one of Amazon...
https://www.amazon.com/iPower-Charcoal-Prefilter-Included-Reversible/dp/B008NYF8S4/ref=sr_1_4?s=lawn-garden&ie=UTF8&qid=1503753117&sr=1-4&keywords=carbon+filter
It even has screws so you can replace the coal if it gets old
You can just blow the air out of the filter
I was typing up my list of shit for my second grow. Lets see if I got my Reddit Formatting Correct. :)
The Details
Seeds
Gear
Veg/Flowering
Seedlings
Medium and Nutes
Meters
Pots
Misc
-i use a BreatheRight by Allen for my allergies. It’s expensive ($600-ish) but if you get the charcoal filter it’s crazy good. Will remove scented candle smells and Bacon smells as well as the very marijuana smoke that I smoke inside my own apartment.
I haven’t received any complaints. It’s been 2 years.
The next thing would be to go one step higher and purpose an in-line fan filter and attach a huge 24” charcoal filter.
This option is actually WAYYYY more effective, but requires just a little bit of knowing how to put stuff together, and it’s slightly loud, but god damn, it totally cleans all smells and allergies.
This first link is for an in-line fan:
https://www.amazon.com/gp/aw/d/B07FPFVZTZ?pf_rd_p=731c2082-c3b6-4ec5-ba3b-337a0516607d&aaxitk=i0llSkJCSVXgMhex-F1n.Q&hsa_cr_id=3570293760101
Second link for the filter:
https://www.amazon.com/gp/aw/d/B008NYF8S4/ref=psdcmw_5446824011_t1_B07FPFVZTZ
Third link is for the Allen Breathe Right:
https://www.amazon.com/Alen-Customizable-Purifier-HEPA-Pure-Allergies/dp/B00APO426E/ref=mp_s_a_1_3?keywords=allen+breath&qid=1574290745&sr=8-3
The Allen is more aesthetically pleasing and is a complete unit that requires zero installation. Simply plug and play. This model is for 1100sqft. If you get this, get the charcoal filter. They have lots of filters.
The in-line fan and filter option will be like 10x more powerful and way more affordable than the Allen, but unpleasant to look at and is louder.
This fan
6" Inline Fan - 395 CFM Exhaust Duct Fan, Built-in Speed Controller, ETL Listed, Pre-Wired 6 FT Grounded Cord - Great Use in Grow Tent with Carbon Filters, Light Fixtures, Intake. Fits 6 Inch Ducts. https://www.amazon.com/dp/B01L0D0UEQ/ref=cm_sw_r_cp_apa_i_5YNSCb9Y7EARS
With this filter
iPower 6" Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan, 420 CFM https://www.amazon.com/dp/B008NYF8S4/ref=cm_sw_r_cp_apa_i_6ZNSCbGZX32RJ
Just know that when you open the tent. Shits gonna smell ..
This is still a work in progress
Details:
Essential shoping list (to me)
-[6" fan and carbon filter]
(https://www.amazon.com/gp/product/B008NYF8S4/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1) works great, no smell, plenty of airflow, relatively loud at 100%, virtually silent when turned down to below 30% with some sound absorbing foam around the intake and fan. 4" would have worked for my small setup. I'm pushing through the filter which is outside my grow area with no problems. Don't forget some ducting and real duct tape. Clamps aren't really needed at these speeds and pressures if you have good tape, but they won't hurt.
-[Speed controller for fan.] (https://www.amazon.com/gp/product/B006NGI2RS/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1) This was definitely overkill, I just didn't trust cheaper voltage regulators, plus I can and have used it for other things. Pretty well made, works great.
-[pH meter.] (https://www.amazon.com/gp/product/B00CMFVXMA/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1) I didn't want to cheap out on this since pH is so important. Meter works great. Only note is you probably want to get some extra storage solution, it only comes with a little, and after a few months you'll run out.
-Light was a Viparspectra 300 (130 actual watts). Worked well, had good growth. I added more light later but for my small space that would have probably given me decent yields.
-[This timer for lights] (https://www.amazon.com/gp/product/B01MYOD58S/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) was super easy to program and hasn't failed. It has a bright blue LED indicating if the timer is sending power to the lights which is nice, but I had to tape over it because it was so bright. Also, the timer gets a little warm which makes me a little uneasy since I only have ~250 watts going through it.
-General Hydroponics FloraGrow, FloraMicro, FloraBloom, CaliMagic. I also got Fox Farms Big Bloom part way through flower but don't have any way to know its actual benefits so it's not an essential.
-Coco for growing medium. Most people add perlite, I didn't.
-7 gal smart pot
-Plastic storage container with a kitchen cooling rack to sit the pot into and onto and allow drainage without making a mess. Cooling rack allows for 1/2" of water to accumulate before the pot is sitting in it.
-[adjustable hangers for lights.] (https://www.amazon.com/gp/product/B0098R0600/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) Work great, easy to use
Set up and process
That's still a booster fan, you need something like this:
https://smile.amazon.com/iPower-GLFANXINLINE6-Hydroponic-Conditioning-Pre-wired/dp/B009LCEUEK/ref=sr_1_3?ie=UTF8&qid=1483577468&sr=8-3&keywords=inline+fan
Booster fan + 1000w hps = heat stress and shit yield as you already experienced.
That tent is also too small for a 1000w. 4x4 or 5x5 is way more appropriate. Go for a 600 or 400 in that closet space.
You do know there's complete tent builds made up in the sidebar, right?
All I know about is an inline booster fan:
https://www.amazon.com/dp/B009LCEUEK
You said 7". You meant 6", right?
In my opinion, you want to keep your controllers and your hardware separate whenever possible. Hardware wears out and breaks down. Controllers usually don't. One day your blower will shit the bed. You want to be able to swap it out quickly and inexpensively. It's cheaper and easier to do this with simple component hardware.
Looking at your schematic: I would use blower like this for the HPS lights. I would draw air in from outdoors, blow it through both hoods with the bulbs facing into the windstream, and then vent it right back outdoors. I would not use any kind of filter on the hoods.
For the tent I would use an 8" blower and filter like this. I would attach the filter directly to the blower and mount it inside the tent. I would draw my air from my cool room with a passive intake, and return it to the cool room with the blower exhaust. I think this arrangement would be the best for controlling heat, odor and humidity. Good luck! I hope you have a successful grow!
Yeah, that makes sense. Everything I've read says the once per minute is for heat not smell but heat I'm not worried about right now since it's winter. I might just get a 6" fan and use my 4" filter/hose for now until I need it. This will give me 175 CFM with my 4" stuff and over 400 if I upgrade to 6" later.
https://smile.amazon.com/iPower-GLFANXINLINE4-Hydroponic-Conditioning-Pre-wired/dp/B009LCEUEK/ref=sr_1_5?ie=UTF8&qid=1479856658&sr=8-5&keywords=4%22%2Binline%2Bfan&th=1
I bought this fan from Amazon. Very similar, but slightly cheaper.
To stay low budget, you could use PC case fans. It depends on how stealth you need to be. If you need a filter for the smell, you might have to go with a legit ventilation kit which would be another $100 on Amazon. like this one
Carbon filter eliminated nearly all odor. I went the first 3 or so weeks without it, then the smell started coming on strong as it was starting to preflower. Bought the filter and it was night and day. Highly suggest it.
Filter
Fan to duct adapter
I found this over at Amazon. Right under your price point I think. Prime shipping available if you're in a hurry.
hey YOU, all this information is in the sidebar or can be easily googled and your shipost comes across particularly shitty.
but, just so this bleeding heart subreddit doesnt call me an asshole for telling you the truth, buy a couple of these lights , prob need like a 4x4 tent at least, you need an exhaust fan with a carbon filter like this
I went with this combo as it was relatively inexpensive:
https://smile.amazon.com/iPower-Inline-Carbon-included-ventilation/dp/B00D7M6692
In hindsight I probably would not recommend this one because the fan is a lot noisier than I would like. The filter itself is performing just fine though.
https://www.amazon.com/dp/B00D7M6692/ref=twister_B01M5KWG52?_encoding=UTF8&th=1
Do you think the 4 incher will be good enough for my needs?
I see, thanks for explaining. Looking at inline kits, is this one you think would work? And does the space the inline lead too have to have fresh air? Since its a tent that will be in a closet.
https://www.amazon.com/iPower-Inline-Carbon-Ducting-Ventilation/dp/B00D7M6692/ref=sr_1_3?ie=UTF8&qid=1525534399&sr=8-3&
This is a full kit I found, do I need everything that's there?
Or can I get something like this with some Aluminum Ducting? Seems to be cheaper, is a filter 100% necessary? Smell for me isn't something that needs to be concealed.
https://www.amazon.com/iPower-Booster-Inline-Exhaust-Grounded/dp/B008N4QIZG/ref=sr_1_3?ie=UTF8&qid=1525534299&sr=8-3&
I am not really sure. I am in the US, but if I were going to get a fan and filter right now I guess i'd get something like this.
https://www.amazon.com/gp/product/B00D7M6692/ref=ox_sc_mini_detail?ie=UTF8&psc=1&smid=AXC6VLRHTOFD2
So yea $250 seems like a lot, but with the controller and what not I don't really know.
They actually have a good picture on that amazon page of how you can set up the filter/fan.
I found this, not Phresh, but it had good reviews compared to the Ventech I have seen recommended on here. I will def look into the Phresh though! Thanks! Edited to ask your opinion on the fan/filter combo or if you have experience with it at all. :)
https://www.amazon.com/gp/product/B00D7M6692/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
I imagine you could purchase these activated charcoal sheets that you can cut to size! Tape a plate with a hole over it and you should be able to cut any size you want. The fan you spec'd looks like it should be able to handle the load that the charcoal filter will cause (it is going to be like trying to breathe through a straw rather than just your mouth).
Another option would be something like this where you have an all in one filter/blower system. It's more money but it will handle all that obstruction better. Alternatively you can go to a harware store and buy an inline duct booster. You should be able to control the fan speed with a big triac or possibly PWM signal.
Great, so I'm looking at this set for my ventilation needs if I do decide on a 3x3 tent. Still not sure about which LED light would be sufficient and of good quality though.
I do have an exhaust fan, that's the one I described above with the carbon filter. Here's what I'm using.
https://www.amazon.com/VIVOSUN-Inline-Controller-Ducting-Ventilation/dp/B01NA07G79/ref=mp_s_a_1_5?keywords=vivosun+inline+fan+6+inch&qid=1566796577&s=gateway&sprefix=vivosun+inli&sr=8-5
this is what I've come up with for my second iteration of the parts list.
| Part Name | Model | Price | Link |
| --- | --- | --- | --- |
| Grow tent | VIVOSUN Horticulture 48"x48"x80" Mylar Hydroponic Grow Tent with Obeservation Window and Floor Tray for Indoor Plant Growing 4' x4' | $185.99 | https://www.amazon.ca/VIVOSUN-Horticulture-Hydroponic-Obeservation-Growing/dp/B01731MNJE/ref=sr_1_7?s=lawn-garden&ie=UTF8&qid=1548815676&sr=1-7&keywords=grow+tent |
| Grow Light | VIVOSUN Hydroponic 600 Watt HPS MH Grow Light Bulb Digital Dimmable Ballast Air Cooled Hood Set | $239.95 | https://www.amazon.ca/VIVOSUN-Hydroponic-Digital-Dimmable-Ballast/dp/B00P8P51ZQ/ref=pd_sbs_86_1?_encoding=UTF8&pd_rd_i=B00P8P51ZQ&pd_rd_r=b5984eae-2511-11e9-9ef7-8b5dde2c9ca4&pd_rd_w=kv8VT&pd_rd_wg=d3xJu&pf_rd_p=d4c8ffae-b082-4374-b96d-0608daba52bb&pf_rd_r=G0R27XTT0WWJAAJ27SVQ&psc=1&refRID=G0R27XTT0WWJAAJ27SVQ |
| exhaust System (filter/fan) | VIVOSUN 6 Inch 440 CFM Inline Fan with Speed Controller, 6 Inch Carbon Filter and 8 Feet of Ducting Combo for Grow Tent Ventilation | $208.99 | https://www.amazon.ca/VIVOSUN-Inline-Controller-Ducting-Ventilation/dp/B01NA07G79/ref=sr_1_3_sspa?s=lawn-garden&ie=UTF8&qid=1548908529&sr=1-3-spons&keywords=inline+fan&psc=1 |
| soil | PRO-MIX 42.5L HP Mycorrhizae Growing Mix | $14.99 | https://www.lowes.ca/soil/pro-mix-425l-hp-mycorrhizae-growing-mix_g2826504.html |
| pots | VIVOSUN 5-Pack 5 Gallons Heavy Duty Thickened Nonwoven Fabric Pots Grow Bags with Handles | 18.99 | https://www.amazon.ca/VIVOSUN-Gallons-Thickened-Nonwoven-Handles/dp/B00TF9E6XE/ref=sr_1_6?ie=UTF8&qid=1548884123&sr=8-6&keywords=fabric+planters |
| temp/humidity sensor | TRIXES Digital LCD Thermometer Temperature Weather Hygrometer Humidity Moisture | $10.29 | https://www.amazon.ca/TRIXES-Thermometer-Temperature-Hygrometer-Humidity/dp/B00KGEAAMI/ref=sr_1_5?s=electronics&ie=UTF8&qid=1548824626&sr=1-5&keywords=temp+and+humidity+sensor |
| Nutriants | Advanced Nutrients pH Perfect Nutrients, Fertilizer. Bloom, Micro and Grow 1-Liter PACK OF 3 | $66.24 | https://www.amazon.ca/Advanced-Nutrients-Perfect-Fertilizer-1-Liter/dp/B07CQSBJ3K/ref=lp_7760549011_1_1?srs=7760549011&ie=UTF8&qid=1548904821&sr=8-1 |
| Total: | | $745.44 | |
Seeing various different plants in this photo, everything in Foxfarm Ocean Forest, no nutes. 2400 Total Watts ( LED "Watts.. so whatever that means to this manufacturer" )
Moved everything into the tent over the last weekend.
Pretty happy with this tent!
Big question on mind is the best way to utilize? I am thinking of using my 2x4 for "vegging" and this 5x5 for flowering? Not sure about moving plants around though. Could also just keep two separate staggered grows going. I thought I could just do all stages in one tent but the different humidity and temperature requirements would mean compromising on the best environment for each stage. Another option is to try a scrog in the 2x4 and a 'regular' grow in the 5x5.
Parts list:
https://www.amazon.ca/gp/product/B01DXYM98K/
https://www.amazon.ca/gp/product/B07GGFTN2J x 2 ( got a 20% discount on one due to buying tent and light from same vendor ) total 2400 Watts "LED"
https://www.amazon.ca/gp/product/B01NA07G79 ( Got the 8" version.... which doesn't seem listed anymore? Specs:VIVOSUN Air Filtration Kit: 8 Inch 740 CFM Inline Fan with Speed Controller, 8 Inch Carbon Filter and 25 Feet of Ducting Combo )
https://www.amazon.ca/gp/product/B06XTPTG1J
I am about to go with that , would you say that it is going to perform better than this https://www.amazon.com/VIVOSUN-Air-Filtration-Kit-Controller/dp/B06XFRNPR8/ref=pd_lpo_sbs_86_t_0?_encoding=UTF8&psc=1&refRID=J69MSM35Y5V8WBQ6GCC9 ?
https://www.amazon.ca/VIVOSUN-Air-Filtration-Kit-Controller/dp/B06XFRNPR8/ref=mp_s_a_1_4?keywords=4+inch+fan+combo&qid=1565703428&s=gateway&sr=8-4
If you're in Canada, $15 off coupon right now to bring it to $135 canadian (taxes already included and free delivery)
Honestly just look around on amazon for a bit. Any 4 inch carbon filter and inline fan combo should do just fine. If you wanna be lazy just buy this one then https://www.amazon.com/VIVOSUN-Inline-Controller-Carbon-Ducting/dp/B06XFRNPR8/ref=sr_1_15?ie=UTF8&qid=1511221397&sr=8-15&keywords=carbon+filter+4+inch
But honestly, any will do just fine.
A 4” fan that is tuneable will be able to fill your needs
Here ya go! VIVOSUN Air Filtration Kit: 4 Inch 203 CFM Inline Fan with Speed Controller, 4'' Carbon Filter and 8 Feet of Ducting Combo https://www.amazon.com/dp/B06XFRNPR8/ref=cm_sw_r_cp_api_i_2KtCDbDYGCGXH
You’ll need to place it on the outside of the tent assuming your entire space is filled with plants. Luckily you can flip the fan either way to control the flow direction
Fan and Filter if your going to spend money on a smoke eater dont fuck around with over priced under powered consumer toys, a set up like this can clear a room in a few minutes the activated carbon in the filter can be easily changed without having to replace a brand specific filter cartage.
The fan I have at hand is a basic 4in fan by vivosun says 203cfm
https://www.amazon.com/VIVOSUN-Air-Filtration-Kit-Controller/dp/B06XFRNPR8?ref_=ast_sto_dp
The hyperlink goes to the tent instead of the chilled logic LEDs. I know which ones you're talking about, but the link is bad. If you're running in a small tent you can really get by with a small fan. You could check out a 4in kit from Amazon. It's cheaper than your current filter and comes with a fan and some ducting. That would be more than enough for your little tent. If you haven't chosen your seeds yet, I would recommend Mephisto genetics for autos. Great stuff, quick shipping. If you're in Canada they do have their shop closed for a few weeks but you can order from the US or UK store.
VIPARSPECTRA Dimmable Series PAR450 450W LED Grow Light - 3 Dimmers 12-Band Full Spectrum for Indoor Plants Veg/Bloom https://www.amazon.com/dp/B01M084LIE/ref=cm_sw_r_cp_apa_5JMSBb41C55FD
VIVOSUN Air Filtration Kit: 4 Inch 203 CFM Inline Fan with Speed Controller, 4'' Carbon Filter and 8 Feet of Ducting Combo https://www.amazon.com/dp/B06XFRNPR8/ref=cm_sw_r_cp_apa_VKMSBbVEBYRWJ
I have a four inch and a 6 inch fan and filter, 4 goes in, 6 goes out.
The rest of it I pretty much wing. My nutes are the fox farm trio.
2x4 Tent
Fan/Exhaust
AliBaba / Ali Express for HLG QB288 240w
Found this kit on amazon: https://www.amazon.ca/VIVOSUN-Inline-Controller-Ducting-Ventilation/dp/B06XFRNPR8/ref=mp_s_a_1_5?crid=2JZC6WKBNDW8M&keywords=carbon%2Bfilter&qid=1554421615&s=gateway&sprefix=carbon%2B&sr=8-5&th=1&psc=1
I think it will do fine... Are there any cheaper kit alternatives?
The fan I got came with a speed controller. Not too sure how much it can control tho tbh. https://www.amazon.com/gp/product/B06XFRNPR8/ref=ppx_yo_dt_b_asin_title_o04_s03?ie=UTF8&psc=1
The kit I was looking at, I am 80% sure my exhaust fan is trash
I tapped my buddy who is an electrician to help me and we will be moving them out of the tent. Gonna build a little shelf to rest them on outside of the tent.
Also, I moved the fan inside the tent and the filter outside the tent according to the bottom-left square of this image for the filter/fan combo I’m using.
Yup
https://www.amazon.com/gp/product/B06XFRNPR8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
This should do it. Set the fan itself to high, then use this to limit the speed:
https://www.amazon.com/iPower-Exhaust-Controller-Adjuster-Inline/dp/B0714FFG4F/
Do you have a speed controller? They’re pretty cheap and make a huge difference. https://www.amazon.com/dp/B0714FFG4F/ref=cm_sw_r_sms_c_api_i_3wDyDbXZEWQGY
Thanks - I know it's higher CFM than I need. I have a [variable speed fan control] (https://www.amazon.com/gp/product/B0714FFG4F/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1); maybe I'll be OK running this fan on low?
A bale of cocogro or cocotek, some CannaCoco A&B or BioVega+BioFlores for organic , some Garden Lime from Lowes, a tent, an led, a light timer, a carbon filter and fan, and a guide book.
Ask Ed's coco guide works well for basics
Micks Coco guide is also good using just MaxiBloom
a good starter pack of nutrients - a small sized grow tent that can fit 4 plants - a fan ventillation system that will handle the smell when you get to flowering - airpots if you want to grow from soil - or DWC hydro buckets if you want to go hydro note that these are pretty easy to DIY, buckets are $5 ea and pumps run $20-50. LED lights to grow with for $160 or you can skip up to the good stuff and go with Quantum Boards which are far superior - not on amazon You can do a lot of your own work on these boards to make them not as expensive.
After your get some seeds, either from bag seed or from an online seller, its really just a matter of paying attention to what the plants are doing and keeping a good schedule with your nutrients or watering. There is a ton of information online, both on reddit and elsewhere that can guide you with anything.
Flower filter? It looks like the manufacturer doesn't exist anymore.
I got basically the same one, no need for air controller IMO https://www.amazon.com/dp/B07VKV2363/ref=cm_sw_r_tw_dp_U_x_oW-pDbKHTN52Q
I also use one of these (I feel like the one I got wasn't 20 bucks though) https://www.amazon.com/dp/B004JKDNG0/ref=cm_sw_r_tw_dp_U_x_0X-pDbEMG3AVQ.