(Part 3) Best multitools & accessories according to redditors

Jump to the top 20

We found 1,713 Reddit comments discussing the best multitools & accessories. We ranked the 493 resulting products by number of redditors who mentioned them. Here are the products ranked 41-60. You can also go back to the previous section.

Next page

Subcategories:

Multitool accessories

Top Reddit comments about Multitools & Accessories:

u/Breakemoff · 59 pointsr/LifeProTips

Buy a few of these and attach them to your seatbelts. Seatbelt cutter and window-breaker.

u/MyOther_UN_is_Clever · 56 pointsr/HomeImprovement

Lots of others have mentioned great projects, so let me give you a general overview of what you should know, and then you can tackle just about anything.

For every project:

  • Watch youtube videos for whatever you want to do until you're pretty comfortable. Make sure the person looks professional. "This old house" is a great resource.
  • ALWAYS take off jewelry and things like wallet chains. Wedding bands are especially notorious for electrical accidents or something awful called "Degloving." Google if you want to be horrified or have an iron stomach when looking at gore.
  • Most projects are "Safe" if you know how to disengage and engage the shutoffs and what to watch out for.
  • Assume whatever you're using is going to spread everywhere (sawdust) or get on things you'd never expect (spray foam on the nice rug 10' away). So cover them or move them.

    Electrical:

  • Buy a non-contact voltage tester. It'll tell you if you're about to shock yourself or not. Check it every time you walk away and come back. I also put masking tape over breakers I'm working on just in case somebody walks by and decides it needs to be flipped.
  • Always work with your right hand only (even if you're left handed). This is to keep a shock from traveling through your heart, which is on your left side of the body. Don't work on a wet/damp surface. Wear thick wool socks and shoes or boots with lots of rubber left on them.

    Plumbing:

  • find your whole-house water shutoff, and the shutoffs (if they're there) for the sink or wherever else you're working.
  • Also, if you do anything with compression fittings, under-tighten them (never over-tighten). Turn the water on (just a bit) and if it's dripping, do a quarter turn and wipe dry with a towel. Repeat until it's no longer dripping. If you overtighten them, they'll leak and you can't undo it without replacing the fitting. It took me 5 trips to Home Depot to learn this...

    General:

  • Never climb a ladder without somebody else around. Always take the time to go down it, if you have to fiddle with changing drillbits or something, or have the helper-person take care of it (and hold the ladder when needed). It doesn't matter how good your ladder is, if you're pushing against a wall with a drill, you can easily destabilize yourself.
  • Buy a deadman's switch that plugs in like an extension cord, and swap it to any saw or cutting device you are using (even the dremel). Alternatively, spend a few more bucks and get a variable speed foot pedal.
  • Don't do anything you don't feel like you "know" enough to do, yet.
  • Learn how blades buckle in saws, and about kickback, before using power saws.
  • Use a GOOD stud detector before going into the wall. If you hit something hard and you aren't sure what it is, back the drill out and take a look. You could be hitting a water pipe, an electrical cable, or are just unlucky and hit a nail in the stud.
  • Use goggles and hearing protection. Your ears don't feel pain. Power tools are louder and more damaging than they sound like.
  • Working with chemicals? Use a gas mask (I like a full painter's mask that incorporates eye protection, because they don't fog like goggles can with a mask on).
  • Working with dust, use a dust mask or gas mask.
  • If you have gas mask, you have to seal the cartridges or they go bad fast.
  • Go to Walmart (because it's much cheaper) and buy a gallon of their solvents before working with chemicals. Know which solvent works on what. Buy low VOC mineral spirits (if available), and acetone. Mineral spirits is going to be for exterior/oil paints, shellacs, and stains. Acetone is going to be for spray foam, certain adhesives, etc. Get an empty tin can with a lid for storing the "used solvent." Btw, I reuse my solvent several times, basically as a "prewash." The sediment falls to the bottom.
  • If you're working with something creating sparks (angle grinder) be aware of where those sparks are flying, have a nearby fire extinguisher, and if you can, dampen the area first (like mop your garage floor). Angle grinders combined with dust, sawdust, and/or scrap wood has started fires.
  • If working with oil based products/mineral spirits, learn how to properly dispose of things like brushes and rags, they can spontaneously combust if left in a heap!
  • Be aware that on high-end drills, there's a button that can lock them into "always on" mode.

    Tool List

  • Non-contact voltage tester (and other useful items)
  • 3M Full Face Gas Mask There's cheaper chinese knockoffs. You have to buy cartridges (get a set for dust and at least one set for VOC - aka gasses like mineral spirits and ammonia)
  • Variable Speed Foot Pedal Can be used like a deadmans switch by fully depressing.
  • Water/leak alarms for peace of mind or sudden failures
  • Stud finder with live AC and metal detection
  • Hearing Protection
  • Goggles (observe where the vents are and if it looks like dust can easily fall into them) or just use the face mask
  • Acetone
  • Mineral Spirits
  • Metal, lidded, disposal bucket. A paint bucket with a lid also works. Note that paint buckets are a different kind of plastic specifically made to resist solvents.
  • A large pack of disposable gloves (make sure they aren't something you or a helper are allergic to, eg latex).
  • Inspection Camera

    Projects to avoid as a beginner

  • Major reconstruction (wall removal)
  • Retaining walls over 1' tall
  • HVAC
  • Tile
  • Traditional wood plank flooring (BUT engineered/click-lock is super easy)
  • Plumbing that isn't compression fittings or threaded (aka, plex/sharkbite/welding)
  • Anything on the roof
  • Anything attached to the outside of your home (where you might inadvertently create leaks or rot in your exterior walls)
  • Precise woodworking (altering your cabinets in your kitchen)

    Projects I'd always recommend hiring out

  • Tile with real stone, metal or glass
  • Granite anything
  • Decks (probably, although make sure the deck builder knows how to properly attach to a house. 70% of decks in the USA aren't and are causing rot and damage)
  • Structural engineering (wall removal/additions, tall retaining walls)
  • Most HVAC
  • Solid wood plank floor or refinishing. (Refinishing is possible, it's just a good 10 hours of work per 50 sqft, or more, super dusty, and makes the house pretty unlivable. Easy to screw up. Best to get an experienced pro in to do it quickly).
  • Anything near your "mains" that feed into your breaker-box (the part coming from the electrical company). Such as replacing the breaker box itself.

    Home improvement is very satisfying and not all that hard. Most people have a story of being lazy once or twice and having a near accident. I've been shocked by 120v (like in your wall)... twice. I've had saw blades break. Just be safe for that 5% of the time you're using something dangerous, and never get too lazy to grab the safety gear.
u/7U5K3N · 27 pointsr/EDC

linky

tldr $100 usd.

u/Servalpur · 15 pointsr/facepalm

Well I'm glad I helped, but don't think you need to spend a whole bunch of cash to get something good. This Stanley multitool is sturdy and only costs like $13-$20 depending on your location. It's not flashy or anything, but it'll get the job done and last a while as long as you aren't using it all day every day like if you're in construction or something.

If you don't mind spending a little money and want something that'll last forever, the Leatherman Wave is anywhere from $50-$90 (depending on where you buy, and if you can find a deal. You very often can if you look). It's incredibly well built, keeps an edge very well, and is very ergonomic. It has a 25 year warranty as well, just in case something goes wrong.

u/Macrauchenia · 13 pointsr/BuyItForLife

I have the Victorinox Swisstool Spirit X:

http://www.amazon.com/Victorinox-Swiss-Army-Swisstool-Spirit/dp/B0027MSC2M/ref=sr_1_5?s=sporting-goods&ie=UTF8&qid=1325214521&sr=1-5

After viewing many different options, I finally settled on this one mainly because of how the handle is curved. It's quite a bit more comfortable to hold than other brands that don't have a curved handle.

I've had it for probably 3-4 years now, use it everyday. It still looks brand new.

u/CycoPenguin · 11 pointsr/BuyItForLife

Personally, I'd say neither. Check out a SOG multitool. Very durable, great set of pliers, and you can change out some of the smaller tools with other options, on the SOG website.

u/DarthGuy101 · 9 pointsr/EDC

My normal EDC (not including cell phone, car keys and CCW as they all cost more than feasible for this situation) is a multitool/knife, flashlight, wallet, watch, pen and bandanna.

Multitool: Leatherman Squirt PS4, $28.75 Not the biggest or baddest MT out there, but it will do pretty much every EDC task I can think of needing to do.

Flashlight: [ThruNite Ti5, $15.95](
https://www.amazon.com/ThruNite-Compact-Penlight-Output-Firefly/dp/B014SGM234/ref=sr_1_12?ie=UTF8&qid=1478977407&sr=8-12&keywords=thrunite) Hard choice between this and the Streamlight Microstream.

Wallet: Big Skinny Metro, $19.99 Carried Big Skinny wallets for years. Only recently switched to Recycled Firefighter, just for a change in pace.

Watch: Casio Calculator, $14.99 The ultimate nerd watch.

Pen: Zebra F-701, $4.63 Best damn pen I've ever used.

Bandanna: Rothco Solid Black Bandanna, $5.87 Any cotton bandanna will do, I just picked this one because it was solid black.

The grand total is: $90.18. The remaining $9.82 will buy me a six pack of mid tier craft beer.

u/real_parksnrec · 8 pointsr/WildernessBackpacking

I love my Leatherman Squirt. It has come in handy many, many times. The pliers are especially valuable. It's not often that you need them, but when you do, you really need them.

My Mora I take with me in case I have to rassle a bear.

u/d00d3r1n022 · 7 pointsr/Ultralight

I had the skeletool and I hated it. I replaced it with the Gerber Dime. To me it's the perfect UL multi-tool and it really shines when I'm fishing. The pliers are spring loaded, it's cheap, and it weighs 2.2 oz.

Edit: Relevant check the description

u/sticky-bit · 7 pointsr/Bushcraft

I found my box cutter knife the other day. It still had a supply of self-honed disposable blades because I preferred them sharper than stock. I think it's been decades since I plunked down and bought disposable blades. They were so sharp I had to warn people.

I think I recall spending 10 minutes to touch up 5 blades, and then I was good for the next few weeks of box opening.

I just checked on amazon, and you can buy a hundred brand name blades for ten to fifteen cents apiece. I had no idea, I assumed they were fifty cents to a dollar each for some reason.

I've heard of people doing the initial cuts for skinning a deer with a box cutter, just because the first part is so abrasive. But I've never even heard of disposable special purpose skinning blades.

https://www.amazon.com/Gerber-31-002745-Vital-Zip/dp/B00I9Y74FI

Gerber makes a "Wyoming" style skinning knife that takes regular box cutter blades. Looks pretty good (and that's coming from someone who hates Gerber multitools)

https://www.amazon.com/Outdoor-Edge-RazorLite-Folding-Knives/dp/B078ZL8Q99/

I don't actually seem to hate the idea of a folder with replaceable utility knifes. You could keep a spare blade in your Altoids tin and swap it out a lot faster than sharpening your knife in the field. And of course there's absolutely no reason you couldn't sharpen your disposable inserts at your leisure at home too.

u/ARKnife · 7 pointsr/knives
u/burnerzero · 6 pointsr/mildlyinteresting

(Hijacking top comment because people keep asking where to find them.)

Amazon has them

Also with a bottle opener

They are much stronger than the normal similar clips so even if you don't need them as tools, they will work better for longer. I've gifted them several times and everyone loves them.


Note: There are no affiliate links and I'm not connected to the product or company, just personally like the product.

u/FeebleOldMan · 6 pointsr/Survival

I got mine from Amazon for $24.79. Wait for the price to drop if you're patient.

https://smile.amazon.com/Victorinox-Swisscard-Lite-Pocket-Tool/dp/B001Y7XVUE

u/PlayDaddy · 5 pointsr/EDC

After some quick googling:

Tools

The 11-in-1 card tool.

United Cutlery card tool

Victorinox Swisstool

Victorinox Swisstool Lite

Tool Logic SVCII

Tool Logic ICC1B

Tool Logic T1BCC

Knives

Cardsharp knife

Nemesis Titanium Card II knife

Snody Crisis Card Gen II

Titanium Charge Card

Utility

Fresnel lens

Diamond Sharpening Card

Eon Classic flashlight

Note that, aside from the 11-in-one tool, none of these products are endorsed by me. Links are provided strictly for educational purposes.

Edit: Formatting

u/mexicojoe · 5 pointsr/Filmmakers

I received this Gerber as a birthday present in middle school. Over 15 years later it's one of my favorite tools that I use on every shoot.
Best present ever.

u/Buixer · 4 pointsr/EDC

Spec-Ops Brand T.H.E. Wallet (Black) https://www.amazon.com/dp/B0029XC49Q/ref=cm_sw_r_awd_PEmOub0B93H45

Victorinox Swiss Army Swisstool Spirit X https://www.amazon.com/dp/B0027MSC2M/ref=cm_sw_r_awd_7FmOub0T67GKA

Leatherman 831925 Juice S2 Multitool https://www.amazon.com/dp/B00JJY4ZZO/ref=cm_sw_r_awd_KGmOub0ZWJAY5

JETBeam BC20 E XPG Cree LED Flashlight, Black https://www.amazon.com/dp/B005171U8S/ref=cm_sw_r_awd_vHmOub0206RKK

Vivis™ Knight V3 13000mAh Dual USB Portable Charger External ... http://www.amazon.com/dp/B00LJCI53M/ref=cm_sw_r_udp_awd_yUmOub0X1GG20

Nitecore Tube 45 Lumens Blue USB Rechargeable Key Chain Flashlight with Lumen Tactical Keychain Light https://www.amazon.com/dp/B00OY9TH16/ref=cm_sw_r_awd_sWmOub0CMG570

Rite in the Rain Tactical Notebook Tan 4 in x 6 in #946T https://www.amazon.com/dp/B000RF0SWI/ref=cm_sw_r_awd_MXmOub1BV5GBQ

Smith and Wesson SWPENMP2BL M and P 2nd Generation Tactical Pen, Blue https://www.amazon.com/dp/B007DCGT12/ref=cm_sw_r_awd_21mOub18DFKDV

Kershaw 3880 Thermite Folding Knife https://www.amazon.com/dp/B00BNPUX94/ref=cm_sw_r_awd_V2mOub0RFH0ZG


These are some of my items.

u/artearth · 4 pointsr/Survival

I dig it. A couple thoughts beyond what folks have said below:

  • a cheap backpack may be more comfortable plus leave hands free than a duffel bag.

  • a cheap used cellphone can give you GPS services plus texting and phone - valuable if you broke a leg in that plane crash. I would assume same cost and weight as the GPS, with more functionality. Perhaps pair it with a simple compass - use the phone to find the destination and the compass to get there.

  • a fire goes a long way toward good morale, not to mention warmth, cooking and signaling. Along with the lighters folks mentioned, I'd pack a small baggie with cotton balls soaked in vaseline.

  • a few blister bandages could save your feet, as might a spare pair of socks. Again, cheap and light, still under budget. Might want to throw in some cheap sunscreen and a hat too.

  • instead of a knife I'd go for a cheap multi-tool.

  • with any spare cash I'd buy a bit of rope or 550 cord. The multi-tool, lighter and rope are general insurance against mishap or murphy's law.

    I can see where this might creep over $200 but I think it's close enough that given time and looking for sales I could keep it under. Also weight would not be much higher, especially given the 27 pounds of water we both would be carrying.
u/I_Say_ · 4 pointsr/EDC

Unfortunately I work on a federal installation so I am limited to a blade of 2.5 inches or less. When I am not there, I'm carrying. There are armed guards in the building...though I'd rather determine my own destiny.

Apologies for the grain in the photo, I believe I had HDR on and some came after editing.

1-
Crucial Gerber

2-
mtech neck knife

3-
Cheap Black Sunglasses (purchased in the Middle East for like $3.00 US equivalent because the sun sucks there)

4-
Speigen iPhone 6+ Case

5-
Access Denied RFID Blocking Leather Trifold Wallet-Tan

6-
Glock 27 with Talon Grips, rubberized

7-
Fox Hybrid Holster

8-
Federal .40 S&W, Personal Defense Hollow Point

u/Hooosier317 · 4 pointsr/Tools
u/donpark · 3 pointsr/MechanicalKeyboards

This was peer recommended lube for reducing spring ping, squeak, and crunch. https://www.amazon.com/Victorinox-4-3301-Swiss-Knife-Multitool/dp/B000FTQP00 - dang, it was $5 something when I got mine. Beware that bottle is smaller than it appears in the photo.

u/willyt1229 · 3 pointsr/EDC

+1 for Victorinox. I have quite a few and all of them get used heavily and come back for more. I have a few leatherman multitools laying around tool. The only one I don't really care for is the OHT. They had to shrink the tools too much to make it one handed and its very big for what it is.

If I had to recommend one multitool it would be a Gerber Dime. They are only 15-20 dollars. Pliers, scissors, bottle opener, tweezers, knife, two screw drivers, and a package opener. The package opener is the most creative tool ever. It is perfect for getting through plastic blister packs. Its is very small/light but stands up to pretty much everything I throw at it. If you aren't doing a lot of heavy work and just want something for small things you run into the Dime is perfect.

https://www.amazon.com/dp/B007BKLB8C/ref=twister_B00SWTHARW?_encoding=UTF8&psc=1

u/veritablequandary · 3 pointsr/computertechs

I guess it depends on if I'm traveling or not.

I travel a lot.

I hate to haul a lot of junk around so I take as little as possible, which (so far) hasn't bitten me in the ass too hard...

  • a multi-tool with knife (I like a Gerber Crucial but it's personal preference - been looking hard at this SOG Kilowatt too)
  • A couple of boot CDs, I carry a Dell CD, one of the ones that comes with new PCs for "reinstalling your operating system" - protip, if you are working on a Dell PC and use one of these discs to install the OS you don't have to type in the key - and a Windows XP SP3 & a Win7 Pro x86 - plus an Acronis boot disc
  • 500GB 2.5" external drive w/ISOs I use + utilities (vary too widely to list here, you'll find your own)
  • 15' Cat5e cable
  • my laptop
  • phone charging cable (USB w/detachable AC adapter)

    And that's really it unless I know I'm going someplace where I'll need cables, switches, etc. - but I'm on foot most of the time so I don't have the luxury of a toolbox, it's got to fit on my back.
u/Dondervuist · 3 pointsr/multitools

The [Victorinox Swisstool Spirit X](https://www.amazon.com/Victorinox-SwissTool-Spirit-Multi-tool-k tLeather/dp/B0027MSC2M/ref=pd_sbs_468_1/133-7022528-5217954?_encoding=UTF8&pd_rd_i=B0027MSC2M&pd_rd_r=d9fcd87f-332a-11e9-b385-1de323ee2e58&pd_rd_w=V2Hg4&pd_rd_wg=LaQuD&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=G0WBBQZFWCY1YD32PSNR&psc=1&refRID=G0WBBQZFWCY1YD32PSNR) would be better rust resistance than the Leatherman. It's a little bit softer metal, but much better corrosion resistance. That's the best that I can think of.

Either way, if you're using it in saltwater, you need to be cleaning it after each use. At least rinse it in fresh water (and probably lightly oil it too). Salt water is super harsh for any metal that's not specifically designed for salt resistance (which none of the multitools on the market are). The Swisstool Spirit X is the highest corrosion resistance available in a multitool that I know of.

u/AGneissGeologist · 3 pointsr/knifeclub

If he likes the style of knife he already has you could share it and we can suggest upgrade. Without knowing that I have three suggestions that should cover most situations.

Esee Izula

Leatherman Wave

Benchmade 810 'Contego'

I've used all three on the daily at some point and have worked in both construction and utility industries

u/robertw3524 · 3 pointsr/VEDC

Parts list by image

1:

u/the_ghost727 · 3 pointsr/aviationmaintenance

I’ve been using this one. The fold out bit/screwdriver comes in handy a lot.

Gerber Center-Drive Multi-Tool with Sheath and Bit set [30-001194] https://www.amazon.com/dp/B01LX91NIU/ref=cm_sw_r_cp_apip_xojMymG57AYEx

u/fiber_optik · 3 pointsr/livesound

I always bring a few items to every show I do to prevent those "oh shoot!" moments:

  • Leatherman Wave- I love this multitool. I'd recommend the extra bit kit as well. It all fits in the included sheath.
  • Sound Tools Sniffer Sender, available in many flavors.
  • Electronics tool kit, any brand with a similar assortment of bits will do.
  • QBox, as others have mentioned. It is so incredibly useful and while it is pricey, there is no alternative that I'm aware of that will do what it does and saves my ass like it does.
  • SD Card 16-32GB, as well as a 64GB flash drive for last minute file transfers. Be careful what format you choose for the flash drive- pick something that will work across as many computers/mixers/recorders as possible. Research what gear you use and see what format they accept. As a rule of thumb, don't store vital or long term files on the SD card because it will likely get formatted for every use because each device is different.
  • Backup battery pack for charging phones (10,000 mAh+) – this works well for powering many 5v items like converters and some small DA's
  • Gender benders- Male to Male, Female to Female
  • Ibuprofen - more of a "gig bag" item than a WTF kit item, but I always bring some with me in a small travel size pill container.
  • Head Lamp. It is so useful to have. When I don't need it, I hang it around my neck if my kit isn't nearby.
  • Batteries in dedicated caddy. I keep half and half alkaline and Ikea LADDA rechargeable AA's as well as 4 9v cells with me.
  • One or two backpack rain covers. One for my pack, and one for a small piece of equipment on stage that needs to covered in a hurry. The elastic around the outside helps it stay secured.
  • Phone charger and additional USB cables. I bring two Lightning cables for my Apple devices, but I also bring a USB Mini B and USB Micro B just in case.

    Ninja edit for links and more detail.
u/BigBepis12345 · 3 pointsr/EDCexchange

I'm curious about the pricing too (I also saw it was $120 when you commented). I looked up the cost of the things listed.

  • Gerber Dime green/black - $16.02 new on Amazon
  • Zebra F-701 pen - $7.20 new on Amazon
  • NarwhalCo pens set of 2 - $11.95 new on their site
  • 2.5" ratchet bit extension - about $4~ new on Amazon (counting out the other bits included in that listing)
  • ARES 1/4" micro bit ratchet & mini bits - $14.42 new on Amazon
  • Small length of black Gorilla tape - less than $1 worth of a full 1-pack price new on Amazon
  • Glasses/screen cleaning cloth - comparable to $1.50 new on Amazon from a 6-pack
  • Length of FireCord - less than $1 worth of a full 1 roll price new on Amazon
  • Bic Mini lighter - about $1.39 new on Amazon from a 5-pack
  • Sim card removal tool - about $0.50 new on Amazon from a 10-pack
  • Kingston 32gb microSD card & portable USB reader - $20.94 new on Amazon
  • CountyComm "Industrial Strength Survival Food Grade Tin" large topo design - $3.45 new on their site

    In total that's about $83.37 USD all new prices. Most include free shipping if purchased from Amazon. I did not include possible cost of that leather holster because the post currently does not say the leather holster is included or not.
u/justsomeguy75 · 3 pointsr/CFBOffTopic

I decided to buy some wine tonight because why not. Went down to the grocery store and grabbed some Two Buck Chuck (actually $3.29, goddamn inflation) and when I got home I actually had to look up whether you serve red wine cold or not. Looking forward to figuring this wine thing out.

Also, I got some of my Christmas presents. Got me a new little Leatherman Squirt PS4 (it's so incredibly tiny) and an Anker battery. Fun little toys.

u/gd_akula · 3 pointsr/EDC

Its not a knife. Just the cutter and glass breaker here's a linkl

u/CommunistWitchDr · 3 pointsr/Coffee

A gasket removal tool (OE has a good set here: http://www.orphanespresso.com/O-ring-Installation-Removal-Pick-Tool-Set_p_4667.html) and C clip pliers (get the channellock ones here: https://www.amazon.com/Channellock-927-8-Inch-Retaining-Plier/dp/B000TG80SY/, the generic ones are awful). Outside that, only generic tools like wrenches and screwdrivers. An E clip tool is also really useful to keep the E clips from flying across the room, but not strictly necessary. https://www.amazon.com/Duratrax-Ultimate-E-Clip-Tool-1-5mm-5mm/dp/B001TAJP9W

You'll need gaskets of course, for a gasket kit, OE offers a good inexpensive one: http://www.orphanespresso.com/La-Pavoni-Rebuild-Kit--PRE-Millenium-Models--Full-Kit_p_4749.html

But you'll want a few other things too.

Base gasket: https://www.espressoparts.com/parts/home-espresso-machine-parts/la-pavoni-home-espresso-machine-parts/la-pavoni-europiccola-professional-diagram-1/la-pavoni-europiccola-tank-to-base-gasket

Relief valve stopper: https://www.espressoparts.com/la-pavoni-relief-valve-spring-stopper

If it's really old (like, very earliest models), you might have to add this on too: http://www.orphanespresso.com/Brass-Sleeve-Machine-Portafilter-Gasket_p_1608.html

You should probably also upgrade the thermofuse to one of these: https://www.espressoparts.com/parts/home-espresso-machine-parts/la-pavoni-home-espresso-machine-parts/la-pavoni-europiccola-professional-diagram-1/la-pavoni-high-limit-reset-thermostat

You may or may not end up needing more, but this should suffice for a standard rebuild as long as any parts that aren't supposed to be consumable aren't broken.

As a further option, you can also upgrade to stainless steel hardware pretty cheap: http://www.orphanespresso.com/Pavoni-Cremina-Group-Rebuild-Stainless-Steel-Hardware-Kit_p_2005.html

Aaaaaand last of all, you can upgrade to an actually decent steam tip too: http://www.orphanespresso.com/OE-SLIM-Single-Hole-Steam-Wand-Tip--Stainless-Steel_p_2175.html

u/Teerlys · 3 pointsr/preppers

For my literally carry on my person at all times kit:

  • This keychain flashlight is one of the things I'll be getting for Christmas this year to replace my old junker. I put a bit of research time into this with the help of /r/flashlights and youtube video reviews. I think it's a solid pick.

  • I carry a Skeletool CX Multitool pretty much everywhere except airplanes. For day to day life it has all of the tools most people will need and weighs way less than a fully packed leatherman. I have uses for this at minimum monthly if not multiple times a week.

  • I also wear a paracord bracelet regularly. Honestly... on that one I've never really had a call to unwind and use it as rope, but I like it well enough and it's nice knowing that it's there if I need it. Given the recent apple keynote address where they announced that their new watch will have full cellular capabilities among the other things it can do I am half considering replacing this with a $400 wrist computer at some point, but that's a hefty investment.

  • Smart phone. A world of information at my fingertips.

  • Then there's the usual stuff like keys, work badge, headphones, wallet.

    However, I also bring my backpack with me to and from work everyday, and if we're heading out adventuring for the day I'll chuck it in my trunk just to have it. I'm not sure I'll get everything here, but I'll toss in what I can remember off of the top of my head.

  • Kleenex, Ibuprofen, pepto tablets, band aids, cough drops
  • Pepper Spray and a boot knife
  • Fingerless leather gloves + a seasonal pair of full work gloves. The fingerless ones are the ones I use most often when I'm helping friends or family move heavy things. They have padded palms and protect my hands well. The seasonal work gloves are for in the event I need to engage in more messy hand work and the winter pair has served as backup for my cold weather gloves more than once when someone less prepared didn't have their own.
  • I got a shemagh once on a whim after watching a video on it. Tried it on, decided I looked ridiculous, but kept it as a small thin blanket in my backpack.
  • Come winter I always have my Balaclava (seriously, this one is awesome) for really cold weather and even a half piece for when it's cold enough for a scarf but I don't really need full head gear. I love both of these and refer to them as my full ninja vs my half ninja. My fiancee rolls her eyes.
  • A few kirkland brand 5 hour energy bottles (I don't like coffee)
  • Umbrella, lighter, backup phone charger, and headphones
  • Full size water-resistant flashlight

    That stuff usually gets toted around with me just about everywhere, though not always directly on my person. Depending on the season or event I'll add or remove items as needed.
u/NYXLHoXP · 2 pointsr/victorinox

Yes it's real.

>How old is it?

The stamp was used in the production period 1980-2005, it's a climber model, so it's from anywhere between 1991-2005.

>How do I clean it?

Official manual can be found here. - Basically just put it under warm water and open/close the different tools, and dry the tools with a clean towel, the rest can airdry, as the stainless steel they use - if im correct - is grade 420, or something close to it. [...Under hardened conditions, grade 420 steels are resistant to fresh water, alkalis, air, foods and mild acids...] Also do yourself a favour and buy the official oil to it.

>The scissor is a little broken, the "spring" seems to be worn out and shifts out of place whenever I try cutting something. Do I have to take it to a repair shop?

You can buy replacements here, Im fairly sure the medium spring will be sufficient, as the climber is part of the medium collection.
>There is a dirty stain on it's side (you can see it on the third image) that's been there forever, and scrubbing it won't remove it. How can I take it off?

Have you tried with acetone/sprit? While it's unlikely, if it has been laying in bad conditions or for whatever reason, should have gotten iron particles knocked into it (like scratching it hard on a piece of iron) it can be rust, but then you should be able to feel it.

>How do I take better care of it in the future?

If you use it outside, just wear a tiny piece of clothes with you, and wipe said tool after use, and put it back in its pounch/container somewhere it isn't exposed. And just clean it every now and then.

Also wipe off acids (apples/oranges)

Source: Got 30+ SAKs. and work daily with metal. https://www.reddit.com/r/victorinox/comments/4x3rjk/camper_sak_with_a_weird_officer_suisse_engraved/d6ccxwu/?context=3

u/mcelesta10 · 2 pointsr/onebag

Ah shoot. Went back in order history and this is the bladeless travel one. But says currently not available. :(
https://www.amazon.com/dp/B00TBF5JC4/ref=cm_sw_r_cp_awdb_t1_qr8tDb2V8NHKJ

u/sysadministrator · 2 pointsr/sysadmin

I have a previous version of this http://www.amazon.com/Leatherman-831192-Squirt-Keychain-Plier/dp/B0032XZW9G/

It has made my life much easier on several occasions.

u/silverbluep · 2 pointsr/shutupandtakemymoney

Cheaper on amazon, and has prime shipping.

The silver is 160$ and the black is 220$.

BTW I am not paid to do endorsement if all my replying got people suspicious. I'm just replying around what I see in my inbox. And I frigging love this thing.

u/luminousfleshgiant · 2 pointsr/news
u/bltjnr · 2 pointsr/EDC

G-Shock GX-56BB Blackout Series Watches - Black / One Size https://www.amazon.com/dp/B01GR7MF4S/ref=cm_sw_r_cp_apip_jeGdRkXA4HHJ2

Silicone Wedding Ring For Men By ROQ Affordable Silicone Rubber Band, Black - Size 9 https://www.amazon.com/dp/B06VV7QNJR/ref=cm_sw_r_cp_api_WyhEAb9SSAYS9

Ruger LCP (carried if not in hospital)

Smith & Wesson K frame 38 Special vehicle EDC (not pictured)

BangTi Titanium Quick Release Keychain Set Super Durable (45mm+32mm Ti Keyring) https://www.amazon.com/dp/B0197PL5AW/ref=cm_sw_r_cp_apip_nUCqrg1Tvd2hC

Recut small truck key for 2001 GMC Yukon XL

Maratac copper AAA light https://countycomm.com/products/copper-maratac-aaa-flashlight-rev-3

GUS Pill capsule GUS Mini Pill Fob, Made in USA, Stainless Steel Keychain Pill Holder, Emergency Aspirin Holder, Compact Design https://www.amazon.com/dp/B00MY9JUME/ref=cm_sw_r_cp_api_bEhEAbYAPF3BX

House key

Gerber Dime Multi-Tool, Black [30-000469] https://www.amazon.com/dp/B006M9NIDO/ref=cm_sw_r_cp_apip_gvDoYJLF2Mhvl
(If traveling Gerber Dime Multi-Tool Travel, Bladeless [31-002777] https://www.amazon.com/dp/B00TBF5JC4/ref=cm_sw_r_cp_apip_SkE1gAGkchC9B)

DIY keychain pen http://www.instructables.com/id/Mini-BIC-Keychain-Pen/?amp_page=true

Spyderco Native Lightweight plain edge

Old monogrammed money clip

Chapstick




u/The_Texican · 2 pointsr/howto

I don't like carrying many multitools, but I bought a Gerber Crucial tool and it is one of the best things I have ever carried.

It seems to be built with a really tight tolerance and the pliers aren't all shaky and loose feeling. The knive is a decent blade, and I really don't have many times I need the screw driver attachments but they are decent all round. Pretty small too, I keep it in my pocket always.

u/Raishun · 2 pointsr/gundeals

It's a really cool multitool, has power assist opening, (basically like a switch blade). Been on my watchlist for over a year, waiting for it to go on sale, and this is the cheapest its ever been by about $10. There is also a silver version for a $1 cheaper

u/Tippytom · 2 pointsr/knives

stagehand here: I have the SOG POWERASSIST. for about 6 years now. the needle nose and firmness of the plier's grip can't be beat, also like how easily accessible the knives are when the tool is closed.

also, the tools can be interchangeable, I replaced the V-cutter with scissors

u/greengrasser11 · 2 pointsr/AskMen

I really like my leatherman squirt. It was like $35 but it fits in my keychain and I always find some use for it throughout the day when I need to do something like cut open a box or tighten a screw.

It has a small blade and I forgot it in my keychain once so it got confiscated by TSA. I bought another one right after. Honestly it doesn't have to be this one, but any small multi tool is super useful to have around all the time. My only suggestion is don't go with Swiss Army Knife only because you've heard of the brand. There are lots of options out there with tools that work best for who you are.

u/jsamhead · 2 pointsr/EDC

Wiha Tools makes the best micro screwdriver bits around, and some of their products are available on Amazon. If I were in your shoes I'd buy this

My personal solution is to keep a Leatherman Wave with a Leatherman pocket clip in my EDC backpack along with a Leatherman Bit Kit that I've modified with a Nite Ize pocket clip and some gorilla tape. Anytime I need to do some screw driving I just clip the wave and bits onto my pocket and they're incredibly accessible.

u/KnashDavis · 2 pointsr/DealsReddit

Like /u/LiquidArrogance said Amazon is better.

Prime shipping and it's a 21 in 1 for like $13

Thanks though OP!

u/homosaphien · 2 pointsr/LifeProTips

Damn you guys, Now I got myself a Leathermen ES4

u/thisalone · 2 pointsr/malefashionadvice

I carry something similar: Victorinox Swisstool Spirit X. Plier multi tools are awesome. Sometimes I would like the one handed knife opening of a Leatherman though, but the Spirit is so nice.

u/q1w2e3r4t5z · 2 pointsr/MechanicalKeyboards

Schmierfix for the stabs and Victorinox for the slider

u/Goodspot · 2 pointsr/EDC
u/KinkyDaddy0 · 2 pointsr/BDSMcommunity

I keep a few things nearby when it comes to rope, i usually have several Emt shears since they are pretty cheap. One in the toy bag, one in the night stand and one i will stick in my pocket or leave laying in an easy to reach place when doing rope. I also have a vita zip rescue knife, you can find that here http://amzn.to/2q0EmxG it's not that expensive and you can see how it's got that tip to protect the skin while cutting away rope if necessary. I also have a marlin spike, it doesn't get used much but it's nice to have for the really hard to get out knots.

u/PhromDaPharcyde · 2 pointsr/DIY

These are in a crate in the trunk:

u/schneemann_gaming · 2 pointsr/MechanicalKeyboards

Thank you for the comprehensive explanation.

Just out of curiosity. How would it compare to something like this:
https://www.amazon.de/gp/product/B000FTQP00/

u/toner_lo · 1 pointr/EngineeringPorn

Sure.

I got the Tread from Amazon: https://www.amazon.com/Leatherman-Bracelet-Friendly-Wearable-Multi-Tool/dp/B018IOXXP8/ref=sr_1_2?ie=UTF8&qid=1485454972&sr=8-2

I got the adapter directly from Chronolinks: http://chronolinks.com/chronolinks-1/

The adapter goes in and out of stock (depending on size and color) on Amazon if that's how you prefer to do things: https://www.amazon.com/ChronoLinks-Leatherman-Tread-Watch-Adapter/dp/B01I8JE6MC/ref=pd_sim_469_2?_encoding=UTF8&psc=1&refRID=EAQ07TM5BDQDPK21P8FW

The adapter is pricey ($40 or so), but it's a pretty niche product and it's nicely CNC'd with no visible logos. I have the stainless version, and it matches the Tread just about perfectly.

I would say all told, I paid about $200 for my new bracelet (tread and adapter). A new steel bracelet for my watch would be at least that much (likely more), so I consider it a relative bargain.

I'm a bit confused by the number of people balking at the price of this stuff when it's really pretty normal for a steel watch bracelet, from my perspective.

u/dieterschaumer · 1 pointr/EDC

You can quite easily enough thread a chain through the carabiner clip or through one of its many holes. https://www.leatherman.com/style-cs-24.html

I own one. Its very light, so hanging it around your neck probably won't be noticeable. Alternatively if you wear... anything with a loop, like belt loops for example, you can clip it to that.

Also, what do you carry already? Like, keys, wallet? Because I carry a squirt on my keys, and in my wallet holds a swiss card lite (of which there are cheaper alternatives out there). That has a little pen knife, a light, screwdriver, scissors, pen, toothpick, and tweezers.

https://www.amazon.com/Victorinox-Swisscard-Lite-Pocket-Tool/dp/B001Y7XVUE

u/QuietSpaces · 1 pointr/CarAV

Thanks for reminding me I didn't have good wire strippers on the list yet. I grabbed a hammer crimp lug tool for $20 that I think will be perfect for the 6 or so 4/0 cables i'll make for now. The Fluke is still a bit high, for setting gains and general audio work is there a more budget brand? I understand it won't be a buy it for life. I keep seeing the Amprobes recommended, for audio work feature wise would the 510, 520, or 530 be sufficient? Perhaps this Klein test kit and some leads?

u/hot_pepper_is_hot · 1 pointr/audioengineering

you can get a Klein DMM for $40. https://www.amazon.com/dp/B00J9Q5FCE/

I avoid the cheap no-name stuff. Recently bought some disco-cheap small screwdriver set from Summit Racing and they were so bad that one of the tips had a 90 turn on the end from bad machining and lack of quality control. I told 'em, too, that selling cheap tools is dangerous, but they'll keep doing it because they can buy them for a penny and sell them for a dollar.

u/warboy · 1 pointr/AskReddit

Thanks. I was looking at that one actually. Just curious, but what do you think of this one?

u/fps81 · 1 pointr/BuyItForLife

I've had a Gerber MP400 for 14 years now and it's still as good as the day I bought it. I've used it for work (IT/Electrical), camping and home the entire time. I also have a newer Gerber Diesel plier, and it's certainly not as good as the MP400, but still better than the letherman tools I've encountered.

u/dgfish · 1 pointr/gadgets

I highly recommend this...great little tool and fits perfectly in my wallet. Contains a pen and other good stuff.

http://www.amazon.com/Victorinox-Swisscard-Lite-Pocket-Tool/dp/B001Y7XVUE/ref=pd_sim_sg_1?ie=UTF8&refRID=05XVQYMGMWQEB6QDH9XA

u/uuelle · 1 pointr/EDC

www.amazon.com/Victorinox-4-3301-Swiss-Knife-Multitool/dp/B000FTQP00/

It's a tiny bottle but lasts forever and it's food safe. Good luck.

u/Todo_Grubb · 1 pointr/parametrek

I love this thread if for no other reason than I get to see what multitools people choose! Here's mine:

Leatherman - Squirt PS4 Multi-Tool, Blue https://www.amazon.com/dp/B0032XZW9G/ref=cm_sw_r_cp_api_FruczbMXE50E3

u/Kanddak · 1 pointr/parametrek

All aboard the Squirt train. https://www.amazon.com/dp/B0032XZW9G/

u/lloganwebb · 1 pointr/parametrek

Awesome, I'm in!

This guy.

u/Madethisfortgispost · 1 pointr/parametrek

Count me in!

Leatherman - Squirt PS4 Multi-Tool, Red https://www.amazon.com/dp/B0032XZW82/ref=cm_sw_r_cp_api_kltczbEBGZ8YW

u/imjgaltstill · 1 pointr/navyseals

Give the leatherman tread a look I love mine and you can fly with it.

u/Fnzzy · 1 pointr/MechanicalKeyboards

http://techkeys.us/collections/accessories/products/krytox-switch-lurbricant

Thin formular for linear switches, thick formular for tactile switches.

If you want to go crazy, swiss army oil for spring lubing.

u/LaGrrrande · 1 pointr/intj

Give a shot to the Victorinox SwissTool Spirit X multi-tool. The fit and finish is worlds away from Leathermans (Of which I own like six, too).

u/CumbersomeNugget · 1 pointr/EDC

I think you're going to find it really difficult to find a cheap, bladeless multi with a saw (it's kind of a choose 2 situation).

​

If you forgo the saw, the Gerber Dime Travel is a nifty, little tool for (relatively) cheap (£25 from my precursory glance at Amazon UK) .

If you really need the saw, the only tool I know of is the Knifeless Rebar ("EDC Rebar" in the UK) and that's looking to be around £100 and it's a full-size multi for little hands to carry.

​

What you're looking for is kind of in between 2 categories - a useful multi-tool, but that is also essentially travel-safe. In my opinion, a multi without a blade isn't very useful, however, I completely agree with introducing them when the kids are ready.


Perhaps it could be a supervised-only tool for the purposes of showing them what you want to show them without using the blade.

u/MFreeman95 · 1 pointr/askanelectrician

Like he said, buy a tester or a multimeter. The plug tester is a little easier to use but the meter has more precise information. Klein Tools 69149 Electrical Test Kit https://www.amazon.com/dp/B00J9Q5FCE/ref=cm_sw_r_cp_apa_Ir0SybS733K9S l other companirs make them to but klein is my personal favorite

u/sylent_knight · 1 pointr/EDC

The Victorinox Jetsetter is also a great little tool, as well as the Gerber Dime Travel

u/mrrockabilly · 1 pointr/parametrek

Great and awesome idea for a giveaway. Here is my Entry

u/desktop_version_bot · 1 pointr/EDC
u/piercedsoul · 1 pointr/rccars

You can get a e-clip tool https://www.amazon.com/Duratrax-Ultimate-E-Clip-Tool-1-5mm-5mm/dp/B001TAJP9W

I have one and it works, but it doesn't guarantee they still go shooting of occasionally. Like others have said, needle nose pliers are the way to go

u/ProfessorLX · 1 pointr/IAmA

If you are looking for a smaller profile cheaper leatherman option, I wild highly recommend the Leatherman Skeletool, it fits in your pocket, has a Phillips or slotted screwdriver (in 2 sizes each), a nice knife, pliers and a bottle opener.

I used to carry a Leatherman Wave but the Skeletool is much more convenient.

https://www.amazon.com/Leatherman-Skeletool-Multi-Tool-Stainless-Steel/dp/B000XU9NXW

The "CX" model had a non serrated blade too which some people prefer.

https://www.amazon.com/gp/aw/d/B0043NYPA6/ref=mp_s_a_1_2?ie=UTF8&qid=1480620623&sr=8-2&pi=SY200_QL40&keywords=leatherman+skeletool&dpPl=1&dpID=312SQE1PDLL&ref=plSrch

The CX is not as cheap though.

u/englishmusic · 1 pointr/Random_Acts_Of_Amazon

Item which would most make me seem like an old posh Englishman - tea bags, because englishman sit around drinking tea all day, right?

Most Phallic Looking Item - it's a bit of a stretch, but it's kind of phallic, maybe?

Most Geeky Item an out of print fantasy board game. that's pretty geeky right?

Item which would most help me achieve a goal - tupperware because my goal is to stock my freezer before winter gets here.

best item to bring to a deserted island a book to keep me company.

u/serioussam1215 · 1 pointr/EDC

List:

u/kingjames101 · 1 pointr/EDC
u/doublestop23 · 1 pointr/Random_Acts_Of_Amazon

Welcome! What is your favorite dish to cook?

[This] (http://www.amazon.com/dp/B00O8RE0JI/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3URPXS9PLKD4W&coliid=I1C9P3MP9SIILZ) is what I consider to be the weirdest item on my wishlist.

u/dododorama · 1 pointr/AskEngineers

As a small light-hearted present, a multitool hairclip might be good for someone with long hair. (Relatively expensive for what they are, though).

u/StephenDrake6 · 1 pointr/BDSMcommunity

Some cheap shears split on rope, or won't cut dyneema. I recommend also keeping a mariner or climbers rope cutter around. Someone linked this below, I have similar.

https://www.amazon.com/gp/product/B00I9Y74FI/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=beasag-20&linkId=9a22236414196c93d8bf31c6579f8ea7