(Part 3) Best shop knives according to redditors
We found 4,389 Reddit comments discussing the best shop knives. We ranked the 1,252 resulting products by number of redditors who mentioned them. Here are the products ranked 41-60. You can also go back to the previous section.
Okay, I can talk scissors.
These look great for certain purposes, but to me they look like they'd be a nightmare in the kitchen -- hard and time consuming to dry, non-dishwasher friendly. For the kitchen I prefer come apart shears, which you can take completely apart to wash and dry.
For cutting paper, regular Fiskars will never fail you.
If you want to cut fabric, you need a dedicated pair of fabric shears. If you like to do anything fabric-oriented, it's worth having a separate pair because dull scissors will shred, rather than cutting. You can go with Ginghers if you feel like going actual BIFL, but I've used Fiskars for 10 years without a hint of wear on them.
For opening boxes, a simple or classic utility knife/box-cutter will do the job and keep your scissor blades from getting crap on them.
And for heavier-duty cutting (like zip-ties), get a pair of compound snips so you don't mess up the blades of your regular scissors.
Edit: it's hilarious to me that this comment has gotten so much attention. There's a lot of good info and alternate suggestions below. The compound snips especially seem to be overqualified for my uses, although as a person whose hands get tender and finicky, especially in the colder months, it's definitely nice to have something that takes the effort out of cutting those damn zip ties.
I think my favorite part is the part where she claims the most deadly thing on the "Brits" carry is the sharpie marker when that person clearly has a knife, a Gerber zip blade, in their carry.
Didn't they use utility knives?
I recommend going slow with hand tools. Buy them one or two at a time, and then learn to use, sharpen, and care for those before buying more. This will help you get the best stuff for you while spending as little as possible. Let your projects guide your tool purchases.
Amazon isn't a great place to buy hand tools. Most people shop at either Lee Valley, Lie-Nielsen, or eBay for planes, chisels, saws, rasps, etc. That said, there's a surprising amount of stuff you'll need that's not the tools themselves. Personally, I wouldn't want to saddle myself with an inferior tool just to use a gift certificate.
Anyways. Stuff you SHOULD buy on amazon:
Hand Tools
Clamps
Measuring/Marking
Sharpening Gear
Consumables
Safety Gear
Typical Gig Bag:
https://imgur.com/a/MfXGy
Very nice quiver and thanks for my next project. I really love working with leather.
For those who want to get started it's not that expensive of a hobby. As for leather it's actually fairly cheap and most projects don't go over $25 in supplies. It's about $100 to get the tools you'll need and although their not top of the line they will last quite a while.
Tool 1 |
Tool 2 |
Tool 3
Tool 4 |
Tool 5 |
Tool 6 |
Tool 7 |
Tool 8 |
Tool 9 |
Tool 10
Correction. It was a snow brush/ice scraper. It's hard to make out because it's so dark. Winter just ended in the last month for us upstate NYers so many still have snow equipment in their cars.
Also, I had a knife I could have drawn in about a second if he had tried rushing me. He's so damn lucky the pepper spray misfired and he was smart enough not to subsequently attack me.
Honorable Mention: Case knives. Traditional lockbacks. Hard as nails and pretty to boot. True pocket knives. Your grandfather (possibly great grandfather) had one. Good stuff the lot of them. $25-50 will get you a legacy knife that you can carry and use and then pass to your kid.
You don't need to spend $200 to get a quality, durable, reliable knife. I've owned all of these knives at one time or another and loved every one of them. Sure they needed sharpening more often and sometimes something a little more drastic (Sanrenmus are often cheaper to replace than fix) but the value is insane. Plus, lets face facts; we're much more likely to break out our Cadet when we get box duty than our Sebenza.
Knife enthusiasts (brothers) if there's a weighed and measured cheapo that I forgot, let me know.
And cheap.
Link for the lazy
A bad ass EDC knife
http://www.amazon.com/gp/aw/d/B00I04OHQ6/ref=mp_s_a_1_1?qid=1459102050&sr=8-1&pi=SX200_QL40&keywords=kershaw+cryo+ii&dpPl=1&dpID=3137JqJCMAL&ref=plSrch
I briefly looked at your list. I'd like to recommend the mora robust knife. I got it for like 12 bucks but it is damn near indestructible. It's also a fixed blade too so it'll be a bit more durable. Unfortunately the price seems to have increased a bit but it's still an incredible value and outperforms a lot of high end knives.
Morakniv Craftline Robust Trade Knife with Carbon Steel Blade and Combi Sheath (3.6-Inches) https://www.amazon.com/dp/B00SROLRDK/ref=cm_sw_r_cp_apa_x4b1AbGZMNDQ1
Ganzo F7551, CRKT Pilar, Cold Steel Tuff Lite, Ganzo G742.
$16.54 for the [CRKT Drifter]
(http://www.amazon.com/Columbia-River-Knife-Tool-6450K/dp/B001DZMBY4?tag=slicinc-20&ascsubtag=f1b829ce9a1311e598aaee01fca2575c0000)
If you are OK with buying brand new, a few popular options here are some suggestions with Amazon (USA) links:
There are many other popular "solid state" keychain tools like the Shard out there, but I did not want to list out many of those.
Kershaw, CRKT, SOG, Even one of the Chinese Ka-Bars would most likely be better quality for the same price.
Try one of these, I think you’ll be very happy:
https://www.amazon.com/Kershaw-Blackwashed-Stainless-Deep-Carry-Pocketclip/dp/B00ILFLBYK/ref=mp_s_a_1_4?dchild=1&keywords=kershaw+tactical+folding+knife&qid=1572238799&sprefix=kershaw+tactical&sr=8-4
https://www.amazon.com/Kershaw-Military-Style-Pocketknife-Black-Oxide-Spearpoint/dp/B07RWR1L44/ref=mp_s_a_1_8?dchild=1&keywords=kershaw+tactical+folding+knife&qid=1572238844&sprefix=kershaw+tactical&sr=8-8
https://www.amazon.com/CRKT-M16-01KZ-Folding-Pocket-Knife/dp/B001C63SP0
https://www.amazon.com/SOG-Folding-Knife-Pocket-Partially/dp/B0073H2P2O/ref=mp_s_a_1_4?keywords=sog+folding+knife&qid=1572238929&sprefix=sog+folding&sr=8-4
A little longer than you're requesting, but what about the Kershaw Blur?
I have one of these on my keyring, super useful.
Gerber GDC Zip Blade [31-001742] https://www.amazon.com/dp/B00AU6AVM6/ref=cm_sw_r_cp_apa_i_BnRSCbSJ8VJ68
Yes, when camping I often carry one of these. It's a great knife.
This guys list is pretty much what I was going to say.
So for some recommendations:
I've restored an antique 1930s No 5. Bought it for 45, and it is best for those on a budget. Any pre WWII Stanley just needs some light restoration work and a reworking of the blade and it will do 20x better than a harbor freight plane and roughly same as modern Stanley sweethearts at 1/3 the cost. It may not be as good as woodriver or lie Nielsen, but it's a 1/4 or 1/6 the cost respectively.
Paul sellers recommends Aldi Chisels, I got Narex instead for an additional $20. I love them, and will only upgrade out of them once I get enough money to go for some veritas or lie Nielsen. I got a set of 4 with imperial measurements for $60ish. I'd put any extra money into sharpening systems than upgrading them.
I bought David Barron dovetail guides and the Japanese pull saws he reccomends. Gyokucho 372 Razor Saw Dotsuki Takebiki Saw. Look at Amazon for the narex chisels I reccomend and the 'people who bought this also bought' section and you'll find it easily. While there you can find some leather for stropping and the green compound you need with it. Also while looking at these, you'll see a reccomendations for the Stanley disposable knife and the replacement blades. This is what Paul sellers recommends, and it works well. Stays ridiculously sharp, and can be rehoned with little effort and the blade cheaply replaced once it becomes to much work top get the thing sharp. Cutting layout lines is much more precise and helps prevent tearout. I bought narex marking knife and love it. I don't mind trying to hone it every so often. Ditto the scratch awl.
Basically took around the Amazon other bought recommendations and you'll find a bunch of fairly cheap quality things to get you up and running.
My EDC
• Kershaw- Skyline in black
• Keys
• Victorinox SAK- Tinker
• Streamlight 73001 Nano Light
• The Ridge- Front Pocket Wallet
• iPhone 5 and OtterBox Defender Case
I've carried a Victorinox alox knife in my pocket for most of the last 30 years. I think my model used to be called the "sturdy boy", and it was anodized red, but the much of the anodization has worn off.
What's your price range?
One of my favorite beater knives, which is ugly as hell, is the Coast RX300. Double lock for extra safety, 7Cr17 stainless blade which holds a decent edge but can still be sharpened with a cheap stone. The blade tends to get some wobble (after using a hammer on the blade spine), but a torx bit and some loctite solves that
For a few bucks more the CRKT M-16 has a better blade and looks a lot nicer, it also has a few different variations to find one you like. Unfortunately the secondary locking arm broke off on one of mine, but I've never heard of it happening to anyone else.
A lot of people swear by anything from Cold Steel, I've had very bad luck with them, but it's also been about 10 years since I've had one, so they may have changed.
CRKT M16-14SFG
Hi! And welcome!
I like the Gayle Bradley 2 in M4, and the BM Valet in M390, but they are both very expensive to start out with. The Shuffle II is kind of crappy - I'd definitely pass on that one. I have no experience with
the Bartender Defeder, but even the XL version looks too small, as is the Rodie. The Delica and Leek are great knives, and would likely be solid options (their ergonomics are better than their handle lengths suggest, especially the Delica). The CRKT M16 is ok, but it's not great (in my opinion). I've never handled CRKT's Endorser, but it looks like a solid choice.
My best suggestion is a RAT 1 in D2. It's 40 bucks and you get a very well-made knife in D2 (semi stain resistant and will hold an edge for a good long time). The AUS-8 version is good, too, but if you're cutting boxes, the D2 option will stay sharp way longer.
As for some other options, here are some good ones from CRKT:
Foresight - It's big and comfy in-hand, but it's expensive for the materials used (aluminum and AUS-8)
Shenanigan - lighter and cheaper than the Foresight, but with the same blade material (AUS-8)
Outrage - aluminum handle and 8Cr13MoV steel (similar to AUS-8, id est, reasonably stainless, decent toughness, ok-ish edge retention), ball bearing pivot (nice and smooth!)
Ripple - aluminum handle, 8Cr13MoV blade, ball bearing pivot
With these suggestions, it may seem like I'm a shill for CRKT, but I'm not. I'm just a fan of Ken Onion's designs and ergonomics. I also like:
Spyderco Endura - very good stainless steel in a lightweight package, with plenty of handle real estate
Byrd Cara Cara 2 - Spyderco's value brand (basically a cheap Endura with 8Cr13MoV steel instead of the excellent blade steel VG-10)
Spyderco Resilience - big and comfy (G-10 scales with 8Cr13Mov steel), and my daily carry at work
Spyderco Manix 2 - light and medium sized (they also make an XL version), with BD-1 (kinda similar to AUS-8, kinda)
Cold Steel Recon 1 Spear Point - a big knife with lots of grippy G-10 handle space. The CTS XHP steel is the bee's knees, and the Recon 1 is an excellent value, but it may be too expensive as a starting point.
Also, I'm sure some other folks will chime in, too. The guys & gals of /r/knifeclub are pretty knowledgeable and helpful.
Again, my number 1 suggestion is the RAT 1 in D2. It'll be hard to beat interms of construction, ergonomics, and utility.
Happy hunting!
Higonokami. This is the one I got.
Dude. This right here is my EDC. Very comfortable and well made knife. It's also got a "speedsafe" assisted opening. Very smooth action.
If you don't find anything from anyone else, I might be willing to order it on amazon for you!
The new Gerber Flatiron doesn't look too bad for a Gerber.
The CRKT Pilar also has somewhat cleavery design and will be great if you prefer a smaller knife.
My choice was the Ganzo Firebird 7551, good quality plus I like the looks and the way it cuts.
Here are my personal essentials.
Also, you're going to want a sharpening system that works for you in the long run. I personally use the Spyderco Sharpmaker But there are tons of good sharpening options out there.
P.S: You're going to get a lot of people hating on your Gerbers most likely, that's because they're honestly not worth it in the long run. They use very low quality steel for the price and they don't have the best quality control. I'm not saying your Gerbers are trash or anything. But they definitely won't last very long. Just about all of the knives I listed will last you a lifetime if you treat them right, and oil/sharpen them correctly.
The CRKT Drifter [Stainless Steel Handle] [G10 Handle] is a good choice, like the poster above suggests. The Ontario RAT-II and Kershaw Clash are other great options.
Buy a Svord Peasant and make your own scales. They're a little over $20 and it's a fun project.
Well, first, congratulations on becoming a LEO. I am not one myself, but I have had a few convos with them and I'm going to start by giving you a couple of things to consider. The first one is, this knife will be a tool, right? A tool is used for all sorts of tasks, some it wasn't intended for like prying, scraping, or breaching/otherwise opening something that wouldn't the best tool for the job. One LEO I spoke with mentioned having to use his knife to do some limited demolition to a couple of walls in a trailer to find drugs. Stabbing through sheet rock, hitting studs, and nails and shit like that. I might suggest having a small pry bar as, you know, your tool that rides with at least, maybe find a belt pouch or way to carry it on your person. Better to have and not need than need and not have on this. Another thing, you might consider starting off with a more affordable knife, a beater. There are several reasons - tools you have on the job can be damaged or lost, and with a cheap beater you won't cry when that happens, you may need to hand it over as evidence in an investigation (used in self defense, etc.) and handing over your favorite knife can be painful even if you do eventually have it returned to you, you will already know about how LEOs and lawyers are not your best friends and having a big ol' scary knife may raise an eyebrow or two even in your position, and FINALLY there's the fact that you may be required to loan your knife out or use it in such a way that would ruin it. Any time you loan a tool out, it's great to expect to be returned in the same condition, but it's not always the case. Additionally, you may find you need it for an emergency, like in a vehicle fire or such a thing, mostly I'm imagining fire-related emergencies. A lot of knives are made with plastic scales which will melt all to shit but is technically still able to be used. This is unlikely, I know, but you're more likely to be there than me, so it is what it is.
After all that, I do have some recommendations!
Kershaw Clash - currently listed at ~$22, it's a fair knife for the money. It's spring assisted opening, a little larger both in size as well as handling (bad for finer cutting manipulation) but would be a great knife to get started with and treat as a beater. Would also serve as entry level EDC and would get you a lot of quick handling experience for the type of knife you'd actually want to get!
Kershaw Blur is a really well known knife by the knife community, combining quite a few really nice points at once. Currently listed at ~$58 (this model), this is also a great knife for someone looking for an all arounder. The blade steel is a little better than the Clash and several other offers from the cheaper side of knives, the scales are really comfortable for medium to large hands, and it doesn't break the bank. In my personal opinion it's probably one of if not the best knife for the money.
Kizer Vanguard is a different blade shape than the previous two, a much more classic style with a drop point. Currently this is on sale for ~$44 and this knife has a variety of handle colors available, which I think is neat. Based on my EDC use, it seems to be quite nice!
CRKT M21-12G has a few variations available with a similar size offered there as well as plain edge versus serrations. Personally I find serrations difficult to sharpen so I avoid them on my knives, but your mileage may vary. This knife is currently ~$46 and is worth it. This is a thicc chunk of steel with a thiccer handle even though the steel liners are milled out. Having taken it apart and put it back together a few times, I find this knife very easy to clean and service.
Ontario Knife Company Rat-1 is no frills and a solid knife. This is currently selling for ~$22 and is worth every penny. There's a few different models with the price varying quite a bit but overall it's below $40. This knife is a large chunk of metal with the scales and thick plastic liners too. However, there are etsy shops that make more custom liners that might be less chunky. Will likely cost more than you paid for the knife, but eh, whatever. This will be harder to lose, I think, since it's so large.
I hope one or more of these suggestions is helpful!
It's a Gerber Zip tiny and shaped like a zipper pull. Probably meant he was able to sneak it through security.
GDC Zip Blade
GDC Zip Light
GDC Zip Driver
GDC Zip Hex
Not much help filling the pockets since these attach to the zipper pulls, but I picked these up recently and they seem like they'll be useful
Also, whatever Leatherman-type multi tool you settle on is up to you, but a Guppie might be a nice complement with the wrench piece
(http://www.amazon.com/gp/product/B00N9P1P48?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00)
(https://www.etsy.com/listing/186731929/monthly-planner-notebook-monthly-diary?ref=shop_home_feat_1)
(http://fieldnotesbrand.com/colors/expedition/)
(http://www.machine-era.com/products/the-machine-era-wallet)
http://content.arch.com/products/titan3.html)
(http://www.amazon.com/Higo-Kami-10-Pocket-Seisakusho/dp/B00EU8MLQY/ref=sr_1_2?ie=UTF8&qid=1451243447&sr=8-2&keywords=higonokami+pocket+knife)
(http://www.amazon.com/Artists-Loft-Illustration-Pens/dp/B00J9YK9HW/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1451243739&sr=1-1&keywords=artist%27s+loft+pen)
(http://www.amazon.com/Sharpie-13801-Industrial-Extra-Fine-Permanent/dp/B00006IFEP/ref=sr_1_1?ie=UTF8&qid=1451243878&sr=8-1&keywords=industrial+sharpie+extra+fine)
(http://www.poshxessories.com/product/WBTS-0767/iPOSH-Mini-Ballpoint-Twist-Stylus-Pen.html)
(http://www.amazon.com/Burts-Bees-Beeswax-Balm-grams/dp/B001E6SCP4)
(http://www.amazon.com/gp/product/B00DYQYIZU?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00)
(http://www.amazon.com/gp/product/B00B80LUQE/ref=pd_luc_rh_sim_03_04_t_img_lh?ie=UTF8&psc=1)
I really like my Kershaw Cryo II - https://www.amazon.com/dp/B00I04OHQ6/ref=cm_sw_r_cp_api_hunAzbX6APCVF
Looks like it $35 right now but I have bought 3 of them and never paid over $25.
Kershaw Cryo
/ Kershaw Cryo G-10
Kershaw Chill
Can you be a little more specific on what you prefer? Flipper/non-flipper? thumb stud/thumb hole/thumb disk? assisted/non assist?
I had a Spyderco Persistence for a while. Its good, but not great like the Tenacious.
For the record, I feel the same that the Cryo is too slippery - which is why I'm super glad Kershaw released a G10 version of it last year.
I also agree that the Tenacious is just a bit too big for EDC - and they do make the Persistence, which is a shrunken version of the Tenacious, with a 2.75 inch blade vs the Tenacious' 3-3/8 inch blade. If you wanna go even smaller, the Ambitious has a 2.25" blade. All 3 knives share a similar design (though the Ambitious is small enough that the proportions might look a little weird to some).
A few other knives of note that are standouts in the sub-$50 price range:
A few notes here
ETA a few more links and some clarification of my still-awake-at-5am rambling.
Stanley 10-049 work knife i've always liked that i could sharpen the blade a few times before you give up and replace it. I have had the same few handles for decades.
You can make a huge variety of joints with just a few tools. This is close to what my toolset looked like when I cut my first dovetails.
Note: None of these are affiliate links. I don't get paid if you buy these.
$28 Dozuki "Z" saw
I prefer western style saws (like the Veritas saw /u/jbaird recommended), but you will be able to cut very nice joints with this:
https://www.amazon.com/Z-saw-07029-Dozuki-Z-Saw/dp/B001DSY7G6/ref=sr_1_2?ie=UTF8&qid=1495827959&sr=8-2&keywords=japanese+saw+dovetail
$14 Empire combination square
https://www.amazon.com/Empire-Level-E280-Professional-Combination/dp/B000EU0ZB0/ref=sr_1_4?ie=UTF8&qid=1495828208&sr=8-4&keywords=combination+square
$10 pocket knife for laying down lines:
https://www.amazon.com/Stanley-10-049-Pocket-Knife-Rotating/dp/B00002X201/ref=sr_1_2?ie=UTF8&qid=1495828775&sr=8-2&keywords=stanley+knife
$24 marking gauge:
https://www.amazon.com/Crown-152M-Miniature-Rosewood-Mortice/dp/B001V9KOSM/ref=sr_1_1?ie=UTF8&qid=1495828829&sr=8-1&keywords=rosewood+gauge
$35 chisel:
https://www.amazon.com/gp/product/B004SG70L4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
You could also get:
$49 DMT coarse sharpening stone. Only sharpening stone you need. Get a strop eventually.
https://www.amazon.com/gp/product/B0001WP1L0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
$5 Stanley Coping saw. Will help you remove dovetail waste.
https://www.amazon.com/Stanley-15-106-8-Inch-Length-4-Inch/dp/B00009OYG2/ref=sr_1_1?ie=UTF8&qid=1495829310&sr=8-1&keywords=coping+saw
Provided you're gonna buy lumber that's already prepped, you should be good to go with the above. I'd suggest building things rather than 'practicing joinery'. You'll get plenty of joinery practice along the way :)
I use a basic Stanley retractable knife with a [50 pack of their blades] (https://www.amazon.com/dp/B000NID9X4/). I've made 2 inserts and the blade just now needed to be flipped to the other side.
I've found that having a good heavy duty cutting straightedge helps a lot here since I essentially steer the blade into it, which is what keeps my lines straight. Look into the Alumicutter.
Thanks, this is really helpful.
Also, I looked at other Victornox models from your link, and found my old knife! The Tinker! It's tempting...
Ergonomics are terrible, steel is HOLY SHIT bad, way worse than even the cheap shit they normally use in their knives. Get a Leatherman Sidekick or Wingman, they're MUCH better and I think actually cheaper on Amazon. Grab a Premium Nylon Sheath from Leatherman for ~$5 if having the pliers out all the time is a big deal, they're made to let you keep em that way.
Edit: http://www.amazon.com/Leatherman-934810-Wave-Nylon-Sheath/dp/B0002H49E4/ref=sr_1_1?ie=UTF8&qid=1374070376&sr=8-1&keywords=leatherman+premium+nylon+sheath+i+-+4
Further edit: Another option would be the Skeletool and just hang it open off a belt loop or something.
I can get one from Amazon.ca for $42 Canadian/30 Euros. It's the alox version. If you want, I can order/ship it out for you.
https://www.amazon.ca/Victorinox-Swiss-Army-53960-Pioneer/dp/B000687B4O/ref=sr_1_1?ie=UTF8&qid=1485812710&sr=8-1&keywords=pioneer+swiss+army+knife
http://www.amazon.com/Dagger-Collectible-Etched-Design-Sheath/dp/B00QL97UPM/ref=sr_1_1?ie=UTF8&qid=1450999873&sr=8-1-spons&keywords=Dagger+knife&psc=1
http://www.amazon.com/Smith-Wesson-SWHRT9B-Black-Knife/dp/B000IXG44U/ref=sr_1_3?ie=UTF8&qid=1450999873&sr=8-3&keywords=Dagger+knife
http://www.amazon.com/Boker-02BO275-Besh-Wedge-Knife-Straight/dp/B0038QO3L0/ref=sr_1_25?ie=UTF8&qid=1450999980&sr=8-25&keywords=Dagger+knife
http://www.amazon.com/02BO1942-Replica-Devils-Brigade-Straight/dp/B005ATMZD6/ref=sr_1_28?ie=UTF8&qid=1451000022&sr=8-28&keywords=Dagger+knife
http://www.amazon.com/Kershaw-4008X-Dune-Neck-Knife/dp/B00TAD2MQ8/ref=pd_rhf_se_s_cp_4?ie=UTF8&dpID=317Rpl5muvL&dpSrc=sims&preST=_SL500_SR135%2C135_&refRID=0WR0KRF4D4TYG5AG0VSS
http://www.amazon.com/Columbia-River-Knife-Tool-2367/dp/B00I04SZMI/ref=pd_rhf_se_s_cp_2?ie=UTF8&dpID=318Ye2a%2BdUL&dpSrc=sims&preST=_SL500_SR135%2C135_&refRID=0T2235EKP7B27STQNRB0
OK, I've done our due diligence, now give with the details.
Nah man he can't afford a knife that good. Try $16
https://www.amazon.com/dp/B000IXG44U/ref=cm_sw_r_cp_apa_i_uDKbBbVFQ18GH
you won't be disappointed.
That being said, consider this knife: CRKT Drifter. Its the only other knife I EDC. Its slimmer than the Gerber AR and the blade is a higher-quality metal. If you get the G10 handled version its a little lighter and the textured handles let you grip better in wet conditions but its less pretty.
The Gerber AR and the CRKT drifter are the two (three if you count the two Drifter models; I've owned both) best EDC, non spring-assist, easy-flick-open knives I've ever owned. I only pick which one I put in my pocket based on my mood :)
I was thinking something similar.
1 Ontario 8848 RAT
2 Kershaw Chill (A bit slimmer, lighter, and sleeker than the Clash)
3 CRKT Drifter G10
I just bought the Chill, and I love it! At 1.9 oz, it's half the weight of the Clash. The locking system is nice and smooth. I loosened the tension a little so I don't need to flick my wrist, just a quick trigger pull on the tab. So far, nothing I can complain about.
The CRKT drifter is the best cheap nice I own. You can find them for around $20.
Add pepper spray or a handgun for a better self defense plan.
http://www.amazon.com/Columbia-River-Knife-Tool-6450K/dp/B001DZMBY4
Crkt minimalist might work for you https://www.amazon.com/Columbia-River-Knife-Minimalist-2387/dp/B0030IT76C
I would avoid all of the ones you linked, they are all low quality brands except the last one you linked but it's a ceramic knife that can't be easily sharpened. I linked some better option bellow.
https://www.amazon.com/Columbia-River-Knife-Minimalist-2387/dp/B0030IT76C/ref=sr_1_1?ie=UTF8&qid=1487532167&sr=8-1&keywords=crkt+neck+knife
https://www.amazon.com/Columbia-River-Knife-Tool-2388/dp/B006SK0SP8/ref=sr_1_3?ie=UTF8&qid=1487532167&sr=8-3&keywords=crkt+neck+knife
https://www.amazon.com/Columbia-River-Knife-Tool-2805/dp/B01BAJIUDI/ref=sr_1_2?ie=UTF8&qid=1487532167&sr=8-2&keywords=crkt+neck+knife
I could sell you my CRKT minimalist bowie that's been barely used. It's a fantastic little knife but I don't really have a use for it at all. I'd let it go for $15 shipped.
Watch, pocket knife, handkerchief.
The watch is obvious and it makes you look like less of a heathen pulling out your mobile phone all the time. The pocket knife is a wonderful tool that will help you open random things, pick your teeth clean, cut an apple, just about anything. The handkerchief is to wipe your sweaty brow after struggling with whatever you used the knife for, most often something similar to this.
May I suggest an Opinel No. 6 or Svord Peasant?.
EDIT: A Zippo or matches are always good too, but not nearly as necessary. I prefer the latter because I smoke a pipe.
Pretty tall order you have there!
One that came to mind was:
http://www.michaelmorrisknives.com/9.html
Im a fan of Svords as well. They are made to be used, and wont break the bank!
http://www.amazon.com/Svord-Peasant-Swedish-carbon-handle/dp/B004HV3A3W
Alright, cool. Well, to start off I EDC a Spyderco Stretch in VG-10 myself because it's a good compromise between a long, heavy knife and a short but light one. The liners in the thing are nearly nonexistent because of how thin and skeletonized they are, so even though the knife has a 3.5" blade it still only weighs 3.4 ounces, which is awesomely light for a knife of that size. If you want, it also comes in ZDP-189 for a slight increase of price. What that means is that it will be more difficult to sharpen than the first one in VG-10, but will also hold an edge for longer. If you're capable of sharpening already, it's a toss up between the two but if you're inexperienced sharpening then I'd recommend the one in VG-10 for ease of learning. Finally, the knife is made by Spyderco, which is known for their incredible quality of construction, among other things. They have a decent but not outstanding warranty.
Next up is one of the most popular knives in that length and price range- the Benchmade Griptilian. At 3.45", this knife is in 154CM, which is similar to the previously mentioned VG-10 but is slightly harder (will hold an edge longer) and is generally a bit more sought-after than VG-10. The axis lock on the knife makes for a strong lock that can easily stand up to harder use and still be easily opened and closed one-handed. At 3.82 ounces, it's slightly heavier than the Stretch but still a fantastic choice of knife. The knife company is known for their great warranty and customer service as well as for the quality of their knives.
Next up is the Spyderco Manix 2, which at 3.375" long in 154CM steel is a fantastic, if bulky, hard use knife. At 5 ounces, it's a bit heavy for most people to EDC but the ball-bearing lock will hold out far beyond what most would expect out of a folding knife. If you like the style but dislike the weight (and don't need a hard use knife as an EDC) you can also get the Manix 2 Lightweight which comes in BD1 steel. Unfortunately, BD1 isn't particularly fantastic but it's definitely a useable steel. At that price point, though, you'd be paying more for the locking system and Spyderco quality than for the steel in that particular knife.
Next in the lineup is the Kershaw Blur in S30V. S30V is, similar to ZDP-189, a very hard steel that'll do great things but be very difficult for a newbie at sharpening to get an edge on. The Blur is going to be lighter than the Manix 2 at 4 ounces and be the same length at 3.375". The knife is an assisted opener (meaning that a torsion spring inside the knife will propel it open quickly when you push on the thumb studs) and is made by Kershaw, a company renowned for their incredible warranty- if you ever break the Blur, they'll be happy to make it better for you.
Since this is a big wall of text, I'll end here for now. If you want more recommendations, though, I'll build you up another wall of text and another and another until you're satisfied.
If you're spending $100, most well known brands will be sharp and strong. The rest depends on taste and preference. But a few options
Triad lock is really tough, CTS-XHP is a great steel. Cold Steel knives always come razor sharp, and are known for being indestructible.
And most likely every person reading this will have another knife to recommend. It's a lot about personal preference. What look do you like, what lock do you like.
edit; Thanks kind stranger for the gold!
I'm personally partial to the rounded/smooth blade. I think tanto blades look cool, and they're probably better for stabbing, but I find more use with one continuous longer edge. And the serrated ones also can be useful. If you really need to saw at something, that's useful. But keeping a sharp edge on the smooth blade will cut any cordage or stuff like that just fine. And again, I get a longer, continuous blade. It's all just a matter of preference. I have sawing tools in my BOB, so I don't need another one on my knife. I like my blades like I like my women: Smooth, curvy, and forged from Sandvik 14C28N steel.
This olive drab one is the exact one I carry.
Why did the scarecrow win a nobel prize?
HE WAS OUTSTANDING IN HIS FIELD.
Heh. Birthday Shenanigans :D boop
I discovered the EDC community this year after spending years rotating through different EDC items, my wife called them "mini obsessions". So this year, when family started asking what I want for Christmas, I started referring to the ever-growing list of items I've got going because of you guys. This is what I roll with now, hopefully I got some cool additions after the holidays (I know for a fact that my pops and I are trading a high end Zippo for a Leatherman Crunch, so at least I got that going for me, which is nice...).
Thanks for reading!
I'd personally go with this flashlight, this pen, and this knife, and this notebook.
A brass notebook seems silly. Ideally, I'd upgrade the knife to a brass bolstered GEC slipjoint. Maybe a higher end flashlight too...like an Olight s1 in brass.
Watch: Seiko Men's SNZG13 Seiko 5 Automatic Black Dial Stainless-Steel Bracelet Watch https://www.amazon.com/dp/B006ITF2H8/ref=cm_sw_r_cp_apa_i_3UYrDbRJTF8KG
Leather and Stainless Steel Key Ring Holder https://www.amazon.com/dp/B01CVGNDRW/ref=cm_sw_r_cp_apa_i_SVYrDbS81KB6W
LEATHERMAN - Squirt PS4 Keychain Multitool with Spring-Action Scissors and Aluminum Handles, Black https://www.amazon.com/dp/B0032Y2OT6/ref=cm_sw_r_cp_apa_i_0WYrDbAEMHKCZ
ThruNite Ti3 EDC Cree XP-G2 R5 AAA Torch Max120 Lumens LED Flashlight, Mini, Cool White https://www.amazon.com/dp/B00LUO028U/ref=cm_sw_r_cp_apa_i_gYYrDbR56EMY6
Zebra Pen 29212 Zebra F-402 Ballpoint Stainless Steel Retractable Pen, Fine Point, 0.7mm, Black Ink, 2-Count https://www.amazon.com/dp/B004WOAJP6/ref=cm_sw_r_cp_apa_i_MXYrDbC2FWZ1C
Kershaw Cryo G-10 Pocket Knife (1555G10) 2.75" Stonewashed Stainless Steel Blade; G-10/Stainless Steel Handle, SpeedSafe Assisted Open, 4-Position Deep-Carry Pocketclip, Frame Lock, Lock Bar https://www.amazon.com/dp/B00I0RXYTY/ref=cm_sw_r_cp_apa_i_SYYrDb848H89Q
[How's this look to ya bud?] (https://www.amazon.com/dp/B00I0RXYTY/ref=cm_sw_r_cp_api_TipPzbWCTPA5E)
Few updates since my last post.
Some of them...
... are also indestructible.
Sorry, I thought it was "HD" and it's just "Robust". Anyway, I own two and love them.
https://www.amazon.com/Morakniv-Craftline-Robust-Carbon-Sheath/dp/B00SROLRDK
Hands down......and now under $20 bucks. CRKT Pilar
https://www.amazon.com/CRKT-Pilar-Folding-Pocket-Knife/dp/B01N3CG3KJ/ref=sr_1_1?crid=1DXODLSD5SBQF&keywords=pilar+knife&qid=1562258202&s=gateway&sprefix=Pilar%2Caps%2C178&sr=8-1
Some CRKT suggestions here...
https://www.amazon.com/CRKT-K-I-S-S-Folding-Pocket-Knife/dp/B000JCOSWA/ref=pd_sbs_200_5?_encoding=UTF8&pd_rd_i=B0001WBAP6&pd_rd_r=486d07b2-2a61-11e9-888f-47f1b1d850e8&pd_rd_w=VDUR6&pd_rd_wg=pkAIJ&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=4K0C2XQSNTGRHXQ7XTVY&refRID=4K0C2XQSNTGRHXQ7XTVY&th=1
https://www.amazon.com/CRKT-Pilar-Folding-Pocket-Knife/dp/B01N3CG3KJ/ref=sr_1_8?s=hi&ie=UTF8&qid=1549493202&sr=1-8&keywords=crkt+knives
https://www.amazon.com/CRKT-K-I-S-S-Folding-Pocket-Knife/dp/B000JCOSWA
Ooh. $25 is tough. There are so many good options for $30-$35...
Here are a couple options around $25
CRKT Ruger LCK
CRKT Pilar
And here are some options around $30
Kershaw Atmos
Ruike P801
Sanrenmu Land 910+
Steel Will Cutjack 3 Inch and 3.5 inch
Buck 110 Slim
And some $35+ options
Kershaw Link
Kershaw Dividend
Spyderco Tenacious
Men's Casio G-Shock Analog-Digital Urban Trainer Charcoal Watch GBA800-8A
CRKT Pilar EDC Folding Pocket Knife: Compact Everyday Carry, Satin Blade with Finger Choil, Thumb Slot Open, Frame Lock Stainless Handle, Reversible P
OtterBox COMMUTER SERIES Case for Galaxy S10 - Retail Packaging - BLACK
https://smile.amazon.com/Dunlop-Petrucci-2-0mm-Guitar-548PJP2-0/dp/B079X38XF1/ref=sr_1_fkmr1_2?keywords=john+patitucci+picks&qid=1569966391&sr=8-2-fkmr1
Dream Theater ring found on etsy
Definitely buy tools based on the project(s) you have to do, but I think a good start would include:
Hand planer (Vintage Stanley Bailey is ideal)
A few chisels (Narex are a good option if you're on a budget)
Combination Square
Marking Knife (Stanley makes one that Paul Sellers recommends: Amazon)
Marking/Mortising Gauge(s): I think Crown is the only company making reliable ones with pins vs. the more common cutting disc.
Saw: I got this to start, its sharp as all heck, and has a crosscut and rip edge Japanese Ryoba
I carry a Stanley folding utility knife It's a good mix of pocket-knife size with swappable utility knife blades. If you need something for more than just collecting pocket lint and opening Amazon packages, but don't quite need to carry a full-size utility, this thing is awesome (and way sharper than any utility I've seen).
Lastly, you'll need to think about measuring and marking. Your work is only as good as the accuracy you can maintain. You'll need:
-Combination square
-Marking knife - I use the one recommended by Paul Sellers https://www.amazon.ca/STANLEY-10-049-Pocket-Knife-Rotating/dp/B00002X201?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duc12-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B00002X201#
-Marking gauge/mortice guage
-Bevel guage - not essential, but nice to have
I'm no pro, but here's my suggstion.
Marking and measuring are important. Get a knife of some sort. This marking knife is cheap and well regarded. Get a combination square (lot available at all sorts of price points). For a longer straight edge, you can use extruded aluminum or angle aluminum which is cheap, lightweight, and straight enough. Then learn to create a knife edge and a handsaw (either western push style, or japanese pull style) and you can cut wood accurately to size.
You're planes will then get you to flatten and surface your boards (you can use the aluminum as winding sticks). Lots of resources available for rehabbing planes. Then the next step is joints. For this, chisels and a comfortable mallet are great (and a rabbet plane if you can find/afford one). To make life easier, a coping saw and a drill (electric or brace and bit) can clear out waste for you. It makes life easier. But the key here is keeping your planes and chisels sharp. I don't know of a budget way to do this. I've got a few Ezelap diamond stones (coarse, fine and extra fine) that I use, but there are other methods as well (sandpaper on glass, waterstones, oil stones, tormeks). But sharpening is critical to handtool woodworking happiness. You might want a sharpening guide as well. The cheap ones work great (I'm not sure why these are so expensive. I think I paid $8 for mine). Then build one of these and you're all set for sharpening. Finally, you need stuff to stick together, so glue and glue applicators are worth looking into. I also use my cabinet scrapers quite a bit, but that's just me. They're cheap so I think everyone should have one.
After that, you can spend all sorts of money on other stuff as you progress. But most anything square can be built with this setup.
This Stanley or because I'm left-handed this bad boy which also comes in a right hand variant.
Anything sharp. There are special carving knifes made by companies like Mora and Flexcut, but they can be kinda pricey for a beginner. I think a great place to start is a simple utility knife. It's cheap, easy, and the replaceable blades mean you don't have a worry about sharpening. It's not great for carving spoons or reliefs, but it will give you a taste. And if you're into it, you can check out more specialized tools like gouges and parting tools.
Looks to be about $4.29
There's the Shilin Cutter
Chambriard makes some cool ones
The classic Opinel or douk douk
[The Okapi knife](https://en.wikipedia.org/wiki/Okapi_(knife)
Higonokami
Sgian Dubhs
The Navaja
The German Mercator
Canadian Grohmann
Mora
Swiss army knife
Stockman
Also, here is a good website to find similar knives: http://www.worldknives.com/
If he had been carrying a Swiss Army knife that's probably the style he prefers, Opinel makes single bladed knives that open in the same way his old SAK did, and leatherman makes amazing multitools, I would recommend checking all these brands out.
Opinel knives are usually extremely cheap and run about 20$/£, their most popular knife is the No. 8 for about 12$/£, it comes in other colors and wood types as well. No. 8 is a bigger model and it might be a little bulky for someone use to a SAK, the small the number in the name ex. No. 7, No.6, get smaller as their number designation does. I have the No. 8 Trekking knife in slate and its a pretty great knife for its price (18$/£).
If he likes Swill Army Knives, there are quite a few more options to look at, they can get a little pricey for their size at times, I own the Tinker, this was my first knife and I have found that looking at the tools on these knives would behoove you. I do not need an awl in the knife I carry every day for instance. There are many many options to chose from, and through a little sifting you may find one that you feel suits him best. Victorinox (the brand that makes swiss army knives) also makes knives that are a little closer to the opinels I mentioned earlier, a few of their models (like this one) are simply one or two blades. I would look into local laws however, I know some places do not allow blades that can be opened with one hand like the one I linked you to.
Leatherman makes wonderful multitools and a few pocket knives. Nearly everything they make have blades that lock as a safety feature, although very few can be flicked open, so I would check the specifics of this law, I doubt a multi-tool is illegal. This is the Micra, it appears to be a smaller version of a leatherman I own that I cannot find on their site. This one has a blade that opens in a way that is legal for sure, its blade does not lock either. If you find that some locking blades are allowed, the Skeletool is a favorite of mine, it may look a little outlandish but it has always had the best combination of essential tools out of any of my multi-tools, and it is one of my favorites. The Style is a smaller version with slightly different tools ( I don't think it has screwdrivers), but it's blade does not lock. The skeletool is about 70$/£ I think, and their smaller tools like the micra and style are under 30$/£, this brand has quite a bit more I didn't touch on, if you think he would like something like this I would check out site, I hope you find something that works, I know I'm always thrilled when my girlfriend gets me a new knife.
I have a Condor also. However thinking outside the box for concealment I ordered a [Leatherman Pouch] (https://www.amazon.com/Leatherman-Standard-Nylon-Sheath-Pockets/dp/B0002H49E4/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1491691338&sr=1-1-catcorr&keywords=leatherman+tool+pouch) and use it instead. People would assume it has a tool not a spare mag.
http://www.amazon.com/Leatherman-934810-Wave-Nylon-Sheath/dp/B0002H49E4/ref=sr_1_1?ie=UTF8&qid=1420968487&sr=8-1&keywords=leatherman+wave+cases
On my belt for 5 years now.
Yep. It fits my Glock 19 mag perfectly.
Leatherman Wave. https://www.amazon.com/dp/B0002H49E4/ref=cm_sw_r_other_awd_QSqRwb9DP892G
The Farmer or the Pioneer are also good choices. I have the Farmer and it's like the Camper II minus the corkscrew and small blade. It's also got the aluminum side plates which are much better for grip and durability IMO. The Pioneer is a great size for EDC but for camping I think the added saw blade on the Farmer is worth it.
I've personally had very good experiences with a Victorinox as EDC. It's not as sexy as the other knives listed here, but it is small enough to always have in your pocket. Plus, it holds an edge well. I use this one ($30), but you can go even cheaper.
This blender would be awesome. We moved at the beginning of the year and while I was unpacking I dropped my blender (not the base the other part) and it cracked too much to use. :( My daughter and I like to drink a lot of smoothies but we haven't in months. Money has been tight and I just had more important things to pay for so we still don't have one.
I think you should get this knife because they can be very useful. Plus you've had it on your with list for a while. The reviews for it are really good. :)
OP says it's an S&W. It looks a lot like mine which is a HRT9B
Amazon Link: http://www.amazon.com/Smith-Wesson-SWHRT9B-Black-Knife/dp/B000IXG44U
Edit: Be careful they are illegal in a lot of areas.
I love the look, feel and accessibility of it.
http://www.amazon.com/Smith-Wesson-SWHRT9B-Black-Knife/dp/B000IXG44U/ref=sr_1_7?ie=UTF8&qid=1454271970&sr=8-7&keywords=smith+and+wesson+knife
That's the one, but they listed it as a knife (before my interest in knives)
https://www.amazon.com/dp/B000IXG44U/ref=cm_sw_r_cp_apa_i_RinSDbBK5SSHH
The Knife
I want to give some love the CRKT m16. At $30, its a cheap way to give this a shot with a quality knife. I have one in my rotation.
http://www.amazon.com/Columbia-River-Knife-Tool-M16-01KZ/dp/B001C63SP0/ref=sr_1_3?ie=UTF8&qid=1397666461&sr=8-3&keywords=m16+crkt
I know it's not clip point, but This fits your budget.
I EDC this or a Kershaw Blur, if you want to spend a little more. The only thing I would change is getting a blade without serations. Otherwise I love it.
This baby here. It's showing up as about $28, so I may have misremembered the price, but it's still quite a bit less expensive than the OP one.
Not worth $45, but I hear it's a good beater. Here it is for ~$20.
CRKT Drifter
https://www.amazon.com/Columbia-River-Knife-Tool-6450K/dp/B001DZMBY4
Sub $25 liner lock knife with G10 scales. Good ergonomics and decent steel for a beater/starter knife that is a great all around knife.
A Benchmade Bugout is one of the lightest you can find at 1.85 oz. Problem is they're ridiculously expensive at $140 retail. A great alternative is the CRKT Drifter at 2.4 oz for about $20. I have several CRKT knives and love them.
When it comes to opening a knife quickly from the pocket, nothing can beat the wave. Flippers require you to change your hand position to flip. Automatics require you to hit a button (maybe changing grip to do it). Assisted knives require you to start the blade moving. Once you wave you'll understand. I also wave my CRKT M16-14SFG which is one of my most carried knives, when I got it directly from China it cost me $25 including shipping but took 3 weeks to arrive. You should look into one if you're interested in a 4" blade. They're still under $50 including shipping from the US so if I was limited to $30 I'd go with the Kershaw-Emerson and if my limit was $50 I'd buy another CRKT. Here's the link: http://www.amazon.com/Columbia-River-Knife-M16-14SFG-Serrated/dp/B001EIE97W/ref=sr_1_1?ie=UTF8&qid=1415409015&sr=8-1&keywords=14sfg
CKRT m16-14SFG . $47.68 on Amazon so you can get two and have a backup.
$13 for the CRKT Folts Minimalist Bowie on Amazon!
CRKT Minimalist Bowie
Yup
​
PM2 S30V plain edge satin finish
Hello fellow VI runner,
For what my opinion matters, I pretty much always carry a knife of some kind when I’m trail running. Partially for the occasional bit of trail/woodwork that needs doing but also for the protective factor from cougars, and because I am a knife knerd too. Most of the folks I run with also carry a blade albeit almost all folding. I can’t comment much on their exact preferences.
In winter I tend towards fixed blade, either a Mora bushcraft (cheapish ) or a compact machete depending if I know trees and branches are down from storms and the like.
In the summer months, I tend towards larger folding knives like a Spyderco PM2 or GB2. I use folders in the summer because it’s brighter and many more folks in the woods so the general risk is down and I don’t want to look like a sociopath running around with a sheathed knife when I bump into hikers and mountain bikers.
I appreciate the comment about the realism about taking on a cougar should it come to that. I hope we all stay safe out there while enjoying the trails.
Amazon's got a wood handle for 22 USD
http://www.amazon.com/Svord-Peasant-Knives-Knife-Handles/dp/B004HV3A3W/ref=sr_1_2?ie=UTF8&qid=1371869968&sr=8-2&keywords=svord
Svord peasant knife https://www.amazon.com/Svord-Peasant-Swedish-carbon-handle/dp/B004HV3A3W there are cheaper versions but this is the version i got
I don't really care about knives, but my hubs does. He has a couple of these and likes them. They look very manly and rustic but are inexpensive and apparently high quality.
Sloppy link, I'm mobile...
Svord Peasant Knife Fold Knife, Swedish high carbon tool steel blade, Brown wood handle PK https://www.amazon.com/dp/B004HV3A3W/ref=cm_sw_r_awd_2vUIub0QTD1BM
Kind of reminds me of the Svord Peasant Knife.
http://www.amazon.com/Spyderco-Manix2-Translucent-PlainEdge-Knife/dp/B0051HLOV6
If you get this one from Amazon it's $75 with free shipping.
It's a bit more expensive than the standard ~$50 EDC knife, but I think for this price it's still a deal. They could be a LOT more expensive with how well they are made/their good steel.
If you save up I think it'd be worth it :) (just my opinion, I love mine. But I don't want you to be disappointed if you save.)
I should have also mentioned that these are not crappy knives. These are American made quality tools it is just that some are better then others. There are people out there that have carried the same $25 knife for 10 years in a row and never had an issue with it.
I just thought to myself... Hmm.. spring assisted knives 50-$75... I stood up to go over to my collection and yelled KERSHAW BLUR! Out loud. A kershaw Blur like this one is perfect for you. There is also a fully black version for about $10 cheaper but it has an inferior steel. This knife has a very fast assisted opener with angled thumb studs and a great lockup. It is made of aluminium with rubber inserts (they feel like the surface of a running track) and the blade would be great for scouts. Carving, cutting rope, cutting food or packages etc. I would strongly suggest this if you are looking for a quality assisted opener.
If it's like this, then I could understand. :)
Been in my amazon suggestions since I saw the other thread a day or so ago
Maybe a classic looking mora or a pukkoo. I also suggest the higo no kami
Amazon sells them in the US. Same knife, same maker.
But I'm guessing you got yours from K&S to get that free shipping lol
Thanks! Now I have it down to the cryo 2 blackwash and the rat 2
http://www.amazon.com/Kershaw-1556BW-Folding-Blackwash-SpeedSafe/dp/B00I04OHQ6
May I recommend the first knife that I bought?
The Cryo II
Holy crap does this thing rock! Its a tank of a knife and it gets the job done. Great low ride pocket clip and smooth as silk opening. Buddy of mine liked mine so much, he bought one as well!
The black rubber insert is glued in place, but it is in there well. Mine hasn't fallen out, although admittedly, it's not one of my more frequently used knives (mine sits in my tool box as an extra utility/beater knife should I need it). Worst case, if it does come out, you can just glue it back into place.
Or, if you want something along those lines (shorter blade and relatively stout knife), the Cryo or Cryo G10 may be worth a look.
Yes, I'd suggest a cheaper knife to practice. Carbon is easier to sharpen and has generally a finer grain (at least with the cheaper knives) so I would suggest getting a carbon knife.
Something like this
https://www.amazon.com/dp/B00SROLRDK
is very suitable for that purpose, inexpensive and not too big. It comes with a "Scandi" grind which makes it especially easy for a beginner to feel for the edge bevel (something you'll have to do with the much smaller bevel on your nakiri later). You can also practice giving it a new, steeper bevel and see if you can do that on both sides evenly.
​
Sorry for writing a lord of the rings trilogy in my last post but I thought better cover all bases ;)
I've only tried a few, but I like the Robust.
It's got a shorter, but noticeably thicker blade than the classic.
And the grip is very comfortable and secure, even in sweaty hands.
https://smile.amazon.com/gp/aw/d/B00SROLRDK/ref=mp_s_a_1_1?ie=UTF8&qid=1493051327
Sorry this is gonna be a long one...
Get yourself a Mora knife for a fixed blade. Half the price of that crap UST one and one and a half million times better. If you want a spear for some odd reason sharpen a stick and harden by roasting it above a fire, don’t tie your knife to it.
Mora Robust will take on anything you need to cut.
https://www.amazon.com/gp/aw/d/B00SROLRDK/ref=mp_s_a_1_1?ie=UTF8&qid=1521148378&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=mora+robust+pro&dpPl=1&dpID=41QqvvpY74L&ref=plSrch
Virtually indestructible, here’s some funny Dutch guys testing it:
https://youtu.be/fKlcBpKbAvM
Don’t buy any tool with a paracord handle, they are impossible to actually use effectively. If you want paracord, buy paracord.
Here is a my car knife. Just as good and a bit cheaper:
https://www.amazon.com/gp/aw/d/B0015A5C70/ref=pd_aw_sim_200_1?ie=UTF8&psc=1&refRID=2JVMWSVRNQBD004C5N13&dpPl=1&dpID=41vzCMqYdGL
Also, don’t bother with the edible plants books. You should not be eating anything in the wild that you cannot 100% positively identify ON YOUR OWN. Learn about edible plants in your area and practice identifying them on your hikes. Take some home and try them in a safe environment if you want to confirm your abilities. Getting sick in an emergency scenario is the last thing you need. Foraging for food is usually going to be a waste of calories you already have anyway and what you find is likely not going to make them up.
I would also include a steel container of some kind for boiling water. Filters break or get lost, water tabs can get ruined. Filtering with a bandana (or grass, gravel/sand and charcoal, *look this up) followed by boiling never fails.
Most importantly, knowledge is the most valuable thing you can have. Consider specific scenarios you might encounter and research skills that will help you handle those types of situations. Knowledge will get you further that gear ever can.
Here’s to hoping you never have to use it!
The one I bought is this CRKT 5311 Pilar Folding Blade Knives https://www.amazon.com/dp/B01N3CG3KJ?ref=ppx_pop_mob_ap_share
CRKT Pilar on Amazon
CRKT Pilar: https://www.amazon.com/Columbia-River-Knife-Tool-5311/dp/B01N3CG3KJ
Couldn't quite get under 5, but these are pretty close. This one is 5.98 with shipping.
There's also [this one] (http://www.amazon.com/Stanley-10-049-Pocket-Knife-Rotating/dp/B00002X201/ref=sr_1_6?s=sporting-goods&ie=UTF8&qid=1394335787&sr=1-6&keywords=pocket+knife) for 6.41, and it has some really good reviews.
This IS under five with shipping, but it's not exactly what you're asking for.
A marking knife always comes in handy: https://www.amazon.com/Stanley-10-049-Pocket-Knife-Rotating/dp/B00002X201
Don't most tradespeople use a utility knife like this? The blades in those are a different shape and significantly thicker than the ones used in a DE razor.
Yep.
Also, buy a half decent utlity knife style razor.
Like one of these, but whatever cheap one you can find at your local hardware store. Something with a handle...
http://www.amazon.com/Stanley-10-099-Classic-Retractable-Utility/dp/B00002X204/ref=sr_1_1?ie=UTF8&qid=1411362168&sr=8-1&keywords=utility+razor
Haha I do not understand your use then. Ive had one for years of daily use... works fantastic.
Doesnt have to be a dewalt... just linked one similar to what i have. the stupid silver stanley ones work well, but i'm not a fan of having to take them apart to change the blade.
Seconding the flashlight and multi tool.
I carry my flashlight with a pocket clip just so it can be attached to the brim of my ballcap if I need light and both hands. Much easier than fumbling with my phone.
Also, if I’m in a situation (ie: truck broke down, power’s out, etc) I don’t want to waste precious phone battery for a flashlight, which uses a ton of juice. Gotta save those sweet amps for mobile gaming, or emergency comms.
I just picked up a Thrunite Ti3, very happy with it. It’s very small, study, great output, multiple settings, and the clip is amazingly (surprisingly) strong.
ThruNite Ti3 EDC Cree XP-G2 R5 AAA Torch Max120 Lumens LED Flashlight, Mini, Cool White https://www.amazon.com/dp/B00LUO028U?ref=yo_pop_ma_swf
Also, a good multi tool is a must for me.
I have several, a Gerber and a Leatherman, as well as a half dozen cheap no name models, but I carry the Victorinox SAK Tinker daily. Fits well in the coin pocket of my jeans. It does have a blade on it though, so be wary of that. If you don’t go with the Tinker, another Victorinox would still be great.
My Leatherman has been with my for well over a decade, and is my daily work carry, but I’m a firm believer that they don’t make them like they used to (mine is a 2002 model).
The Gerber is a forever backup. It was a gift, and my least favorite. Feels cheap in my hands when I use it, but I know it would get the job done if necessary. It stays in my range bag normally.
As for the Tinker, here’s a link;
Victorinox Swiss Army Tinker Pocket Knife, Red,91mm https://www.amazon.com/dp/B00004YVB4/ref=cm_sw_r_cp_api_jGmKAb8QN9QH9
Good luck and happy hunting.
How about a Victorinox Tinker or Hiker? The Tinker has a phillips instead of corkscrew, and the Hiker is a Tinker with a saw.
My first pocket knife was one of these back in cub scouts, the sides fell off in a week. It's a rip off version of the Victorinox (Swiss Army) Tinker($20 at Amazon):
http://www.amazon.com/Victorinox-Swiss-Tinker-Pocket-Knife/dp/B00004YVB4/ref=sr_1_7?ie=UTF8&qid=1407326681&sr=8-7&keywords=swiss+army+knife
Best money can buy.
https://www.amazon.com/Victorinox-Swiss-Tinker-Pocket-Knife/dp/B00004YVB4/ref=sr_1_8?ie=UTF8&qid=1472865361&sr=8-8&keywords=swiss+army+knife
Ah! This one https://www.amazon.com/Victorinox-Swiss-Tinker-Pocket-Knife/dp/B00004YVB4/ref=sr_1_9?crid=1J7QS2NQDUN7A&keywords=swiss+army+knife&qid=1569019230&s=sporting-goods&sprefix=swiss+arm%2Csporting%2C133&sr=1-9
I generally have either a SAK classic or a leatherman squirt on my keychain, both are tiny, useful and in no way can be mistaken for a weapon and they suit my everyday cutting needs. The other SAK I might take if I need it is a SAK tinker, I like SAK's as they don't look threatening when you use them and they are good pocketknives.
You just have to be smart about what you're carrying and if you don't have a legitimate reason to carry one then don't.
I have this: https://amzn.com/B00004YVB4/ i carry practically everywhere
I saw a similar post in one of the gun related subreddits suggesting using a Leatherman Sheath as a mag carrier. Fits my G23/27 mags like a glove. I was embarrassed I didn't think of it. Best part is that if someone sees it, they just think it's a Leatherman.
I have a Wave myself, had no trouble at all with the standard nylon pouch
http://www.amazon.co.uk/Leatherman-New-Wave-Nylon-Pouch/dp/B0002H49E4
I love mine. The blades came razor sharp and have worked well for everything I've used them for. The locking mechanism feels solid, and having the blades on the outside of the tool is definitely a bonus. I got the black version because it was actually cheaper than the plain vanilla stainless at the time. I like the look, but for the first couple of days I had black oxide all over my fingers after I used it.
Leatherman also appears to be having some quality issues -- I bought three (two were gifts, and I couldn't resist getting one for myself), and on one the tension on the inside tools was too loose to keep them in place. I sent it in to Leatherman and they fixed it.
I wouldn't suggest pocket carry. It's a compact tool, but it's heavy. I have this sheath. There are actually several pockets in the sheath -- two narrow elastic ones down the sides of the pouch (I have a Streamlight Microstream in one side that fits perfectly, and I'd like to get a pen for the other) and a larger elastic one in back (sized for one panel of the bit kit) as well as the tool pocket itself. That little hole in the bottom of the pouch is allegedly for open-pliers carry -- it does work, but I've never really carried it that way. There are also straps on the back of the sheath that let me carry it horizontally (barely -- I've got a 1.5" belt), but it's not really very comfortable.
Mine came with the MOLLE pouch, but I didn't like it. The back has a vertical strap secured by a snap, which I like better than the fixed strap on the standard sheath, but the extra play lets the sheath flop around too much for comfort. However, it is also the perfect size for a 2 oz can of OC spray, so no loss. :) It also has the horizontal straps that are meant to interface with other MOLLE gear. I thought I could make this work for horizontal carry, but my belt won't fit through.
They do make pocket clips, though. I'll be able to review that in a week or so when mine comes in.
Edit: I also have a Swiss Army Trekker that sits in my hiking gear. It's not a bad tool, but it's a "meh" knife. The steel is stainless no-name, and the whole thing just feels kind of toy-like. However, it does have a toothpick and tweezers...not that I've used the watchglass screwdriver in the Wave as a toothpick. That would just be weird.
I love it and it has excellent flavor
Pros: it's a Draw fire that feels great between your fingers. For some reason not having those two things are what kept me from totally getting off the cig's before
Cons: the biggest con is the short battery life I recharge at least once a day. I've read some people get spit back but I never have. I only fill it to where the black cap starts and I store it standing up. I have a leatherman holster that has a pencil pocket on it which is where I keep it on me, I also never leave the house without my multitool
Note: according to the guys at ecig-city a version 2 is coming out shortly but I haven't found anything on it but hopefully, it will have a bigger battery
This? https://www.amazon.com/gp/product/B0002H49E4/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
I was looking at that holster, i have a older model leatherman, but it does the job fine. I also have a 4 in 1 and a 8 in 1 screw driver(s) that i carry like pens that normally does the job. But im sick of having them in my pocket lol
Im in
https://www.amazon.com/Victorinox-Pioneer-Alox/dp/B000687B4O/?tag=parametrek-20
Awesome giveaway! Thanks for the opportunity!
https://www.amazon.com/Victorinox-Pioneer-Alox/dp/B000687B4O/?tag=parametrek-20
I like this one !
https://www.amazon.com/Victorinox-Pioneer-Alox/dp/B000687B4O/?tag=parametrek-20
Thanks for doing this!
https://www.amazon.com/Victorinox-Swiss-Pioneer-Pocket-Silver/dp/B000687B4O
As a knife collector with a whole mess of Benchmades, Spydercos, Case folders, and even a Strider SMF, my favorite go-to is the Victorinox Pioneer. The others all have their place for one occasion or another and I'll carry them when needed, but the main blade on the Pioneer does most of the day-to-day tasks just fine with the added bonus of a couple extra tools and it's not as threatening to onlookers.
It was this demo video that made me decide to acquire one and is the perfect demonstration on why to carry a knife
I own 2, this is the single edge :
https://www.amazon.com/dp/B00I0RUZGY/ref=cm_sw_r_cp_apa_i_YTwxDbFDP2PSP
Double edge :
https://www.amazon.com/dp/B000IXG44U/ref=cm_sw_r_cp_apa_i_iSwxDbNBKPZYW
There's several dagger-style knives in that price range - here's one:
https://www.amazon.com/Smith-Wesson-H-R-T-SWHRT9B-Handle/dp/B000IXG44U/ref=sr_1_4?ie=UTF8&qid=1499381913&sr=8-4&keywords=smith+wesson+knife
Be careful carrying it though, double-edged knives are illegal in several states.
I use these knives a lot. I can't bring myself to buy very expensive knives because I am famous for loosing them. But for the price, it's hard to beat these two.
http://www.amazon.com/Kershaw-1660-Onion-Folding-SpeedSafe/dp/B0009VC9Y0/ref=sr_1_69?s=sporting-goods&ie=UTF8&qid=1416206248&sr=1-69&keywords=kershaw+leek
http://www.amazon.com/Columbia-River-Knife-Tool-M16-01KZ/dp/B001C63SP0/ref=sr_1_35?s=sporting-goods&ie=UTF8&qid=1416206327&sr=1-35&keywords=kershaw+leek
Maybe something from Cold Steel?
http://www.amazon.com/Cold-Steel-58TMAK-AK-47d-Tanto/dp/B0030DHIJA/ref=pd_sim_sg_23?ie=UTF8&refRID=08V1NGSGR0HX33GJTF0E
http://www.amazon.com/Cold-Steel-29TLT-Voyager-Large/dp/B00322FPCQ/ref=pd_sim_sg_6?ie=UTF8&refRID=10D9VJ1M2HDXXPYJ9X58
or CRKT peraps:
http://www.amazon.com/Columbia-River-Knife-Tool-M16-01KZ/dp/B001C63SP0/ref=pd_sim_sg_4?ie=UTF8&refRID=1MPZY9N6HDEWDETRP84V
http://www.amazon.com/Columbia-River-Knife-2900-Assisted/dp/B0033HF4CQ/ref=pd_sim_hi_2?ie=UTF8&refRID=1BWHSGYNG7D7BD818HPQ
Buy 2
Easy to sharpen, small, and hold an edge relatively well.
I'm one of those guys that can appreciate benchmade and kershaw, but can't swallow the price on a tool I'm likely to abuse and/or lose. CRKT knives have done well for me and I've only managed to lose 2 in the last 7 years. I have about 5 as of now, a few bigger ones that don't see much use and 3 or 4 of these smaller ones that see regular use.
Buy something like this to keep sharp things sharp.
I sharpen my daily carry knives about once every 2-3 months. All my knives get sharpened once a year.
If you want classy, you can't go wrong with a Case knife.
If you want a hard worker, go for something like an Emmerson knife. If you really want to make him happy, go after one of the Emmerson CQC (close quarter combat) knives.
If you want something he could carry with him every day and fill just about any EDC type use, get him a Spyderco Endura 4. They even come in multiple colors.
I tried to pull a bunch of good knives under $60 for you. $40 generally won't get you something that will last for years, but $60 will.
You might look at CRKT's M16 knives. Or something from SOG. But I generally wouldn't recommend them, as the quality of the blade steel is kinda meh, and the quality control is iffy as they come from china.
I think I am going to go for The Spear Point variant. Thanks for your help!
CRKT M16-01KZ.
The CRKT drifter is a great simple and slightly smaller fold out knife. The blades closer to 3 inches but it fits in your hand great, and is really well balanced. You can get it with a serrated part of the blade or you can get just a plain blade.
I strongly recommend this knife.
[CRKT Drifter] ( http://www.amazon.com/gp/aw/d/B001DZMBY4?cache=ed98f139319c462d2d832e6327e90b11&pi=SY200_QL40&qid=1411128596&sr=8-1#ref=mp_s_a_1_1) is a stupid good knife for $20. I cannot recommend it enough...
Columbia River Knife and Tool's M16-14SFG Special Forces Folding Knife with Veff Serrated Blade https://www.amazon.com/dp/B001EIE97W/ref=cm_sw_r_cp_api_aj3BybFH8M3C5
If it is something you use often, yes. I had a few benchmades, but ended up "loosing" them along with a box of rifle parts I had during a move where I hired people to help out. I never had to use the warranty, but people in my chapter did and from my understanding it was easy.
After that I found the CRKT M16 which has been my EDC knife for the last 2 years. In that time I had 1 screw fall out of the handle near the bottom and the clip hung up on a box at work and bent it way out of wack. Both times I went to their website, requested replacement parts and within a week had the new parts delivered to me free of charge.
If your willing to spend $50 on a knife, I would highly recommend it. Haven't had to sharpen it yet, and I don't know if they offer that service.
Pics of my knife. The other thing I like about this model is it is double locking. The red trigger on the back has to be slid down to "unlock" the thumb mechanism to close the lock.
How about a CRKT M16? They have a bunch of different variations, too.
Columbia River Knife and Tool's M16-14SFG Special Forces Folding Knife with Veff Serrated Blade https://www.amazon.com/dp/B001EIE97W/ref=cm_sw_r_awd_WoyVub1DXCFA0
When you get it use the tool, take the current clip off and use the spare to put it on the opposite side. It's quicker than a switch blade
Let me introduce you to a friend of mine.
There are other versions as well, and if you’re looking for a fixed blade CRKT makes them too.
Amazon.
The CRKT Minimalist is a pretty neat little knife.
http://www.amazon.com/Columbia-River-Knife-Minimalist-2387/dp/B0030IT76C/ref=sr_1_7?ie=UTF8&qid=1395596610&sr=8-7&keywords=crkt
I really love the three finger grip on this one https://www.amazon.com/Columbia-River-Knife-Minimalist-2387/dp/B0030IT76C/ref=sr_1_1?ie=UTF8&qid=1487532167&sr=8-1&keywords=crkt+neck+knife
if it has to be fixed blade your options are pretty limited
becker necker
crkt minimalist
boker gnome
esee izula
the only one of these i've owned is the becker necker, which is great, but the sheath is so big that it pretty much cancels out the small size of the knife.
Hate to be that guy, but the minimalist is available for 25 new. http://www.amazon.com/Columbia-River-Knife-Minimalist-2387/dp/B0030IT76C
The minimalist is 25.50 new from Amazon, so you might want to adjust that price. GLWS
I don't own one personally, but it seems like the CRKT Minimalist Bowie would fit the bill. It comes in a few other blade shapes too.
https://www.amazon.com/gp/aw/d/B0030IT76C/ref=mp_s_a_1_1?ie=UTF8&qid=1499225264&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=crkt+minimalist&dpPl=1&dpID=41qZLc8RFzL&ref=plSrch
Edit: just noticed you wanted the handle shape to be relatively the same, so maybe this isn't the one for you, but still worth a look.
> Can I get some best-in-class suggestions for sub-$100, ~$150, and sub $200? Might get lucky with a sale.
You also said you wanted a good slicer so I'm going with that as my main criteria. Also these are my opinions.
Sub $100: Spyderco Delica 4 Lightweight FRN Or Spyderco Endura 4
$150-ish: Spyderco ParaMilitary2 G-10 In many peoples opinion this is probably the best EDC blade available.
Under $200-ish: Zero Tolerance 0450CF
---------------------------------
Other great knives for EDC:
Ontario RAT II - Only $25. Worth getting for when someone wants to "borrow your knife".
Benchmade 940-2 - $180-ish. Light easy to carry, not much belly to the blade shape so not always the best for slicing.
Spyderco Dragonfly 2 - $50ish depending on the color. Small knife, easy to carry. Unless your EDC tasks involve skinning wild animals, this will work fine.
Cold Steel Code4 $70-ish. Great steel, thin knife so it carries easily, slices well thanks to think factory grind.
Here is the item page. "Ships from and sold by Amazon.com". I actually received one that I believe to be genuine, but it had a slightly warped tip. I requested an exchange, and the replacement I got was the fake.
It's unlike anything I've seen in the fake vs real comparisons. The most obvious difference is the texture of the G10 - much coarser on the fake. Smaller details include the size and thickness of the plastic bag the knife comes wrapped in, minute differences in the blade etchings and pocket clip.
The Spyderco ParaMilitary 2 is an excellent choice.
Amazon is where I got mine from. It'll Run you 124$. Definitely worth it though. Doesn't come with the lanyard in case you were wondering, I got that off of the CRKT Obake.
Heres a handy like for ya
https://www.amazon.com/dp/B003X9WKOO/ref=cm_sw_r_cp_apa_33TyzbD83DPGE
You're welcome! I should mention that there are other variants of it, including this one with g-10 scales that are more grippy.
If you like the Police, you should also look at the Paramilitary 2. It is probably Spyderco's most famous knife.
$109 pm2, new
https://www.amazon.com/gp/product/B003X9WKOO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
http://www.amazon.com/Morakniv-Companion-Sandvik-Military-4-1-Inch/dp/B009NZVZ3E/ref=sr_1_2?ie=UTF8&qid=1382540279&sr=8-2&keywords=mora+knife
http://www.amazon.com/Spyderco-Ambitious-Black-PlainEdge-Knife/dp/B004MMSDHO/ref=sr_1_9?ie=UTF8&qid=1382540355&sr=8-9&keywords=spyderco+tenacious
http://www.amazon.com/Opinel-No8-Carbon-Pocket-Knife/dp/B002SCUO04/ref=sr_1_2?ie=UTF8&qid=1382540386&sr=8-2&keywords=opinel
http://www.amazon.com/Svord-Peasant-Knives-Knife-Handles/dp/B004HV3A3W/ref=pd_sim_hg_15
All good quality knives under $30
I am not the biggest fan of liner lock knives. I like the one handed functionality, but they are certainly not as sturdy as back lock knives, especially overbuilt locks like cold steel's tri ad lock system. Say what you will about cold steel's dubious advertising or catering towards mall ninjas, the tri ad lock system is very strong. I also enjoy friction knives, such as this svord peasant. http://www.amazon.com/Svord-Peasant-Knives-Knife-Handles/dp/B004HV3A3W However if I have the opportunity to carry a fixed blade I would much rather do so than any folding knife.
[Manix 2 lightweight with BD1] (https://www.amazon.com/Spyderco-Manix2-Translucent-PlainEdge-Knife/dp/B0051HLOV6?ie=UTF8&*Version*=1&*entries*=0) but if your willing to pay just a little more I think the [CPM s110V] (https://www.amazon.com/Spyderco-C101PDBL2-Pocket-Folding-8-Inch/dp/B00K3AO6S4/ref=sr_1_4?ie=UTF8&qid=1466916024&sr=8-4&keywords=spyderco+manix+2+lightweight) one is way worth it.
Yup. That's the one. There is also a Manix 2 lightweight you could look into. It's a lot lighter due to it having no steel liners. It's cheaper also!
http://www.amazon.com/Spyderco-Manix2-Translucent-PlainEdge-Knife/dp/B0051HLOV6/ref=sr_1_1?ie=UTF8&qid=1376161674&sr=8-1&keywords=manix+2
Looks like a Manix 2 Lightweight.
Kershaw Cryo MODEL 1555TI 49.90 EUR on amazon.de
Kershaw Cryo MODEL 1555TI 22.30 USD/18.95 EUR on amazon.com
available here at an austrian shop for 77,90 EUR
in this case it's a chinese made Kershaw, but kind of a standard go to knive in that price range.
For US made:
Kershaw Blur for 89,95 EUR at amazon.de
Kershaw Blur for 44.95 USD/38.20 EUR at amazon.com
Kershaw Blur. Had one for a while but I'm not the biggest fan of spring assist knives. Great knife, held a decent edge. Easily opened and closed with 1 hand.
.g-shock watch
.kershaw blurr
.Leatherman wave with pocketclip and R.A.E sheath
.Fallout wallet
.Keys vic classic pill bottle with 200 MG Stay Awake
.Cheap hankie
Kershaw Blur 1670OLBLK
Kershaw Blur, Olive/Black Pocket Knife (1670OLBLK); 3.4" Black DLC-Coated 14C28N Steel Blade, Olive Anodized Aluminum Handle, Black Trac-Tec Inserts, SpeedSafe Opening, Reversible Pocketclip; 3.9 OZ https://www.amazon.com/dp/B006PTMSCI/ref=cm_sw_r_cp_apa_i_FAWQDbQZ356RC
Olive/Black - Sorry, looks like this is dead already.
Tanto Black - 1670TBLKST
Gerber GDC Zip Blade.
5 SELF DEFENSE GADGETS & EDC GADGETS YOU NEED TO SEE 2017
https://www.youtube.com/watch?v=7SQMt12ZbuA
5- Gerber GDC Zip Blade [31-001742] https://www.amazon.com/gp/product/B00AU6AVM6
4- The s1 Pepper Spray Gun Test by The Modern Rogue https://www.saltsupply.com/
3- Mantis Knife 9001277 ViciousCircle https://www.knifecenter.com/
2- Nug https://jho-knives.com/
1- Gerber GDC Hook Knife [30-000637] https://www.amazon.com/Gerber-GDC-Hook-Knife-30-000637/dp/B00B0I46OC
personal security, SELF DEFENSE Inventions, self defense gadgets, EDC Inventions,inventions, gadgets, must have inventions,must have gadgets, protection gadgets, protection inventions, security gadgets, security inventions, self defence gadgets,Technology, EDC, edc inventions, edc gadgets, cool edc gadgets,Weirdest, In the World,Coolest, cooll,tech,test, amazing, futuristic, best,top 7, awesome, you did not know existed, inventions, best 5, top 10, 2017, concept, must have,review,protect, defend, safe
http://www.amazon.com/Gerber-GDC-Zip-Blade-31-001742/dp/B00AU6AVM6/ref=pd_bxgy_469_2?ie=UTF8&refRID=1Z8FNJ37Z97ZF76059AR
Have this on me with my keys at all times.
Gerber EDC Zip. Absolutely tiny, but pretty darn useful. Rarely do I need a larger knife. Hard AF to sharpen though, I have to take it apart. http://imgur.com/a/bwGIO
Spyderco Bug (12) Too small. Must be held like a full-size folder, which just doesn't work at this size.
Gerber EDC Zip (7-12) Love it. Thick enough to hold with a pinch grip, and small enough that I don't have to give any consideration to its weight. Sadly I have to take the blade out to sharpen it.
Rotring 600 0.5mm Mechanical Pencil
Sandisk SD Card
https://www.amazon.com/Gerber-GDC-Zip-Blade-31-001742/dp/B00AU6AVM6/ref=sr_1_40?ie=UTF8&qid=1482515240&sr=8-40&keywords=gerber+knife
I have this on me all the time, all year round, one of the best purchases I've ever made.
http://www.amazon.com/Higo-Kami-10-Pocket-Seisakusho/dp/B00EU8MLQY?ie=UTF8&refRID=P6R4S7ECP8NQTJRMZJ6J&ref_=pd_rhf_sc_p_img_1
It's a pretty rudimentary knife, but it still looks pretty cool and works well
Lord have mercy...
Anyway. Blade form is very similar to a Higonokami. You can search that various places, but here's a cheap one from Amazon:
https://www.amazon.com/gp/product/B00EU8MLQY
For that price range I would look at something along the lines of a Cryo 2 (http://www.amazon.com/Kershaw-1556BW-Folding-Blackwash-SpeedSafe/dp/B00I04OHQ6)
The black wash finish may be unique enough for you (I like the finish because it hides scratches well)
I have it and it's not as nice as my Benchmades or ZT but I can absolutely beat on this knife and it just takes it. At the price point of $32 you could spend the remaining $18 (staying under $50) on a torx set if you want to be able to disassemble and clean your knife.
$37.07 on amazon at the moment.
Here's the link of the Cryo II I bought two weeks ago: http://www.amazon.de/Kershaw-Klappmesser-Blackwash-SpeedSafe-1556BW/dp/B00I04OHQ6/ref=sr_1_6?ie=UTF8&qid=1417803795&sr=8-6&keywords=cryo
Shouldn't be a problem to get it shipped to Sweden from Germany! It's a great little blade, I can only recommend it!
One of my favorite budget knives
http://www.amazon.com/gp/product/B00I04OHQ6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I was talking about this one: https://www.amazon.com/Kershaw-Stonewashed-4-Position-Deep-Carry-Pocketclip/dp/B00I0RXYTY/
​
Totally understand if he doesn't like the Cryo, though. It has served me well and is cheap enough that I don't feel bad using it for tough jobs, but smooth action is pretty smooth.
I like Kershaw Cryo a lot
https://www.amazon.com/gp/product/B00I0RXYTY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Morakniv
I got a CRKT Pilar a while back for work utility. It's 4" folded and the Wharncliffe blade is 2.4". They came out with a larger version as well (Pilar II) but since I'm using an unauthorized cutting instrument at work, smaller profile is helpful.
The small version is $30
https://www.amazon.com/dp/B01N3CG3KJ/ref=cm_sw_r_cp_awdb_t1_pjlqDbXM18FKS
That price range is tough but probably the Ontario rat 2 or maybe the CRKT Pilar
I like the CRKT Pilar. It's a little heavier but open so nice after the break. It's under $22 right now at Amazon
https://www.amazon.com/CRKT-Pilar-Folding-Pocket-Knife/dp/B01N3CG3KJ
Are you a thumb stud guy or a flipper type of guy?
For cheap multifunctional knife that gets the job done, I’d personally recommend the Kershaw Shuffle as it has a knife and a bottle opener that I suppose you could make a cord cutter from if you’re up for the task
For a good budget knife I’d recommend either the CRKT Squid or the CRKT Pilar but these don’t have the safety cutters your looking for.
Maybe opt for a buck knife with two blades as they are not threatening looking or a Swiss Army knife
Here ya go friend
Spyderco Manix2 Translucent Blue FRCP PlainEdge Knife https://www.amazon.com/dp/B0051HLOV6/ref=cm_sw_r_awd_4GFkub0ANXMXB
Just to let you know, I can get this new on amazon for $72.67Not calling you out or anything just letting you know.>Usually ships within 1 to 2 months
Disregard.
How about a box cutter? Seems pretty innocent to me and could do a lot of damage if needed to save your life.
https://www.amazon.com/Stanley-10-099-Classic-Retractable-Utility/dp/B00002X204/ref=sr_1_8?ie=UTF8&qid=1501778453&sr=8-8&keywords=box+cutter