Reddit Reddit reviews Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

We found 135 Reddit comments about Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor. Here are the top ones, ranked by their Reddit score.

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor
Professional Master Airbrush Airbrushing System with a Model G22 Multi-Purpose High Performance Precision Airbrush with a 1/3 oz. gravity fluid cup and a 0.3mm fluid tip.Premium Master Airbrush Model TC-20 High Performance 1/5 hp Air Compressor with air filter water trap with pressure regulator along with an airbrush holder for 2 airbrushes.Includes Master Airbrushes best selling user friendly and versatile gravity feed airbrush that's commonly used for: hobbies, crafts, auto graphics, temporary tattoos, cake decorating, fine art, nail art and more!Great starter airbrush kit for beginners and students, as well as for advanced artists since it works excellent for most airbrushing applications and also with most types of paint spray media. Includes bonus How-To-Airbrush Manual & Guide Booklet by Master Airbrush.100% Satisfaction Guarantee: Buy with confidence, if you're not satisfied with this airbrush at anytime within the first year of purchase or the compressor at anytime within the second year of purchase, we'll provide a refund or replacement.
Check price on Amazon

135 Reddit comments about Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor:

u/Jabo2531 · 11 pointsr/Warhammer40k

Yeah I didn’t get some high end one, maybe in the future when I decide to do more than just base coating, I got the airbrush/compressor etc for 80 bucks off amazon

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

u/loafjunky · 8 pointsr/minipainting

This right here! I started off with it, and to this day I'm still using the compressor, just upgraded the airbrush. The set will last you a long time while you get the hang of things and improve your skill. Once you feel you're ready to move onto a better airbrush, do your research, find what you want, and then all you'll need is the airbrush and a new moisture trap that fits the new airbrush hose. Different brands have different size connectors.

But yeah, I can't recommend that set enough.

u/Blindman213 · 6 pointsr/Warhammer40k

Air brush, compressor, respirator, paints.

Here is a good one.
Comes with the first 2 and all the bits. Just be sure to thin the paints a bit. AND GET A RESPIRATOR!

u/cacheflow · 6 pointsr/modelmakers

Seconding the above. I have this kit

The compressor seems a little nicer than the one above, but its the same brush. I can second everything said above about the brush, its definitely not as good as a higher end one. The thing is, it is a great starter set.

My advice on buying tools is: Buy a cheap one first. If you end up using it enough/wearing it out, then its a good time to upgrade to the higher end one. The nice thing about that kit is you can switch out the brush for a more expensive one, and keep the compressor.

u/gwarsh41 · 5 pointsr/Warhammer

I cannot recommend an airbrush enough. Save up a bit and grab something basic like this I've got a similar compressor for my iwata, and have heard those air brushes are pretty good for the cost. Even if you just base coat or prime your minis with it, it is totally worth it for super clean base coats.

u/disgustipated · 5 pointsr/ModelCars

The better Chinese stuff is pretty inexpensive, and works well for a noob.

This is a great starter kit. Take a look at the other Master Airbrush sets - they have multi airbrushes, compressors with holding tanks, etc.

u/rlperez · 4 pointsr/minipainting these starter kits are pretty solid. That's how I got started on the air brushing fronteir. You'll also need to buy some air brush cleaner brushes that are like 60 cents or something on amazon and buy a bottle of green stuff house cleaner. That's pretty much the simplest cleaning set up that I've been using . Now if you paint single 28 mm minis, you really don't need an airbrush. Buuut if you get one, you'll probably crap yourself in joy and start getting larger sized models because they'll be so quick to paint! A decent starting kit goes between 80 and 90 bucks. The link I left you is for 76? And it's the same kit? I love amazon. This will also help you paint terrain if you're into that. Good luck!
One more thing. You might want to invest in airbrush paints. But if that isn't in your budget remember to thin whatever paints you use into a SKIM MILK consistency. That piece of advice no one told me for awhile. It's a bit crucial. Otherwise there's gonna be alooot of gunk in your gun.

u/jyoon673 · 4 pointsr/Gunpla

Want to get into airbrushing but not sure which kit to get - was hoping someone could recommend one to me

So far I'm interested in these two

Also wanted to get this airbrush booth and was wondering how frequently I would have to change filters and how difficult it is to do so (ie. is it easy to find replacement filters and is it difficult to take apart and put back in)

u/radicalblur · 4 pointsr/Gunpla

I assume you want a complete setup? I'll keep recommending this

The airbrush is decent and the compressor is very good.

As for paints, that's really up to your preference and availability of ventilation. Lacquer (Mr Color line) and Enamel (Testors Model Master) paints require ventilation and a respirator or you'll do permanent damage to your health. Water based acrylics (Vallejo, Badger, Tamiya) are much safer and can use with a good particulate filter mask. Water based acrylics are not as durable as lacquer paints though so that's the trade off.

addendum: As /u/7x13 mentions there are water soluble, solvent based acrylics such as Tamiya and Model Master Acrylics, Mr Color Aqueous and Mr Color Acrysion which uses solvents that are less toxic but nevertheless, you should probably exercise caution.

u/Mr_Supotco · 4 pointsr/Warhammer40k

It’s definitely incredibly worth it. With just a brush, from base coat to detail work, it’d take me probably about 3-4 hours for a tactical marine/intercessor. But with an airbrush, the work on it went from 3-4 hours to about 20 minutes just from the time I’ve saved base coating. Just go for a cheapy one on Amazon, mine is this Master one that comes with a compressor too. The compressor is great, and you won’t be doing any detail work with the brush but just the time being saved on base coats is crazy. I finished a whole Rhino in about 45 minutes just by doing the first coat with the airbrush. Definitely one of the best hobby investments you can make

u/neromir · 3 pointsr/Warhammer

If you're looking into getting into it, but aren't sure what exactly you want, I found and bought this kit last year:

Fair warning: the airbrush is Master brand, which is made in China, and is most probably a knockoff of an older Iwata. It is not an amazing airbrush, but it is decent. You will not likely be able to find a compressor and airbrush for a similar price elsewhere (at least not that I've been aware of).

I think it isn't a bad starter airbrush, but it is quite the pain to clean. I found it to be satisfactory for my needs (I used it on that Warhound WIP I posted the other day) and was a good way to get a decent compressor and airbrush to figure out how to use one and what they're good for. I'm starting to look into upgrading to a better brush myself, but if you're likely to be on a budget for a while, this could work out pretty well for a while, it just won't be amazing.

u/satanic_pony · 3 pointsr/Warhammer40k

If you're just doing base coating, this kit is more than capable of giving you good results.

u/007A99 · 3 pointsr/modelmakers

You can get a decent, but pretty basic kit for $80 (

I have no experience with that airbrush, so I cannot speak of its quality. My recommendation is to buy the Iwata Neo from Hobby Lobby or Michaels. 50% off coupons are pretty easy to come by, so you could get it for $50-$60.

If you do that, you will need a compressor. The TC-20T ( is a good compressor that is pretty quiet and has a tank.

Personally, I have a Badge 105 Patriot and I just use a noisy Campbell-Hausfield compressor. I just got these for Christmas and am still experimenting with it before I paint a model.

I wish the best of luck to you!

u/SeiJai · 3 pointsr/Gunpla

This might be a better alternative.

u/pantherbrujah · 3 pointsr/Gunpla

If you were to purchase one of these airbrush kits is there any other equipment that you need for the kit?

Also if this spray booth will anything else be required?

Want to make sure I get anything I need for a gift I’m giving.

u/hawaiianko · 3 pointsr/Gunpla

This is the one to get for starters. The price is unbeatable, you’d probably need a better airbrush eventually but the air compressor is good. Also I did not use a fan, I sprayed outside for this kit, but if you’re indoors then you’d need a fan

u/TheSheDM · 3 pointsr/rpg

Does your son already have a minipainting setup and you're looking to give them something to add to that, or are they new and getting into the hobby?

Re-read your post and realized I spaced out and missed the part that you have given them a mini to paint in the past.

Do they have an airbrush? An airbrush set would be a very nice gift to a painter that doesn't have one and has probably been considering it but put off because of the cost of getting one.

This one is quite cheap and portable. which could be good since they're going off to college. It's a very basic set good for beginners. The compressor has no tank, so some people people turn their nose up at it because it's not perfect but I think it works fine for a portable option. I have this exact same one and I'm very happy with it because I don't paint vehicles or big warhammer armies - I paint 3-5 minis a month and use this to base, layer, and varnish with and you don't need fine-tuning air regulators to throw down some primer.

Alternatively, here's a less portable set with a full size air compressor, tank & regulator combo. Very good price and if your son gets more into airbrushing and later upgrades to a nicer high-end airbrush, they won't have to upgrade from the mini compressor as this tank and compressor as this one should do just fine with any brush.

If your son already has an airbrush set up, they might appreciate a spray booth.

I don't know what your budget is, but's here something any minipainter would love to have orbital shaker paint mixer for agitating paints without wearing out your elbow. Its definitely a luxury item lots of minipainters wish they could have (I know I wish I could afford one!)

u/darkyokuo · 3 pointsr/Warhammer

A good, cheap way to start off with airbrushing is buying a master airbrush kit with air compressor and hose. I started off with this kit:

I then later replaced that airbrush with a badger patriot 105 which I continue to use now.

u/camboramb0 · 3 pointsr/NintendoSwitch

Thanks! You have to dissembled the joy cons which is pretty simple after my first one. 5-10 minutes each joy con.

From another reply I posted.

"You want to start off using an air brush kit. You can get some pretty cheap ones for about 80 bucks that will do the job. Something like this
I have a better air brush that's about 150 bucks alone but it's because we use it for other stuff that requires more precision. You won't need something that much to do the job.
Start off taking out your joycons and cleaning it. Use grey or black primer and let it cure for 12+ hours.
As for the paint itself, you can use any of these and it depends on what you like. I used the gold/green/orange/purple so it changes to any of these colors based on the angle.
For the finish, I used It gives it a really nice soft touch feel but it's very thick. You'll want to thin it out a bit and let it cure for 24+ hours. Multiple coats the better for that extra protection and long lasting feel. Although I used these here, I am finding that they will wear out eventually. I am redoing the finish with this now. You can also go with a glossy finish if you want as well.

I just started air brushing a few months ago so just practice on some test objects."

u/The_Sign_Painter · 3 pointsr/Gunpla

I'm not OP, but if you want a good airbrush, get the Master Airbrush set. It's like 80 bucks for a compressor and air brush that work VERY well.

I used it to achieve this finish on my GM Ground Type with Tamiya paints.

u/krink85 · 3 pointsr/Fishing

I buy blank lures off amazon (15 bucks for 20 or so) and I have a cheap compressor and airbrush that I use. I get my paint from craft stores so nothing special there. I connected my pump to a 5 gallon air tank so my pump isnt running all the time and I used a plastic bin with a cheap bathroom vent fan to exhaust fumes for my spray booth. All in all in equipment I have $200 bucks into it. Lures, hooks, and split rings are found on amazon and I have about 50-60 bucks into that.

I could buy a lot of lure for that price but I find it fun to mess with designs and make lure for my brother.

Link to airbrush kit I have :

u/toanyonebutyou · 3 pointsr/minipainting

If you plan on playing with the minis do game air not model air. My understanding is that model air is not made to be handled.

Also I think the model master airbrush set from Amazon is more than enough for a beginner. No need to lay down 500 bucks for a good airbrush and compressor.

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

u/Pukit · 3 pointsr/modelmakers

Save your money. You need $20 more for a decent starter brush here, I wouldn’t buy one of these, I had one, made one model and sold it. In honesty I’d save up, double your money and buy either a kit like this compressor with tank with brush, or preferably just the compressor for $70 and a decent airbrush like the Iwata neo for $60.

A compressor with a tank means the compressor doesn’t run all the time so prolongs the compressor life itself. It has a decent water trap and regulator to adjust pressure.

A Neo is a superb brush for the money, cheap Chinese airbrushes have less accuracy, require deeper cleaner and can give a frustrating experience.

It’s often worth spending once and spending right in this field. Hence I suggest saving your money.

u/bizology · 3 pointsr/Gunpla

Haha, I knew there'd be a folllow up! I bought a set similar to this and it works fine:

As for paints, I highly recommend learning with acrylics first. They are non-toxic, water-soluble and can be sprayed indoors with minimal ventilation. I'd stay away from lacquers until you have the confidence and gear to properly use them.

For paint I'd recommend two types, Mr. Hobby Acrysion and Vallejo Mecha acrylics. Both need to be thinned down before spraying, so you will need the solvents too.

Here are the paints (I'm in Canada):

u/Callmebobbyorbooby · 2 pointsr/modelmakers

Awesome, thanks for the info. And yeah I don't have a compressor so I'm looking for a combo if possible. I found this one that seems to have pretty good reviews so I may give it a try. Do you think this would be too cheap or should I just suck it up and invest more in something good. I don't want to buy a piece of crap that will break in a month or not do what I need it to do. Thanks so much for the help.

Edit: This is another one I was looking at that seems like a better quality airbrush but it's more expensive, which I don't mind paying if it makes that much of a difference

u/Panduhsaur · 2 pointsr/Gunpla

I've asked this before and the general gist of budget ones will be buy this: [Compressor](
and this airbrush

u/IchBinEinFrankfurter · 2 pointsr/Gunpla

Thanks a lot!

I used the master airbrush brush/compressor combo, about $80 on Amazon. It worked well enough for a noob like myself.

Difficult? I don't know about that, but it took a lot longer than I'm used to it taking with rattle cans. The results are much better though, even for a first attempt.

Edit: added Amazon link

u/psycovirus · 2 pointsr/Gunpla

If you live in the US, Masters Airbrushes are very affordable test beds for air brushing.

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit

With an Air Tank.

If you live in other countries, you can consider AS186. Almost the same compressor but 220V. You can get a Chinese airbrush for testing purposes.

If you like Aurbrushing, you can upgrade to more branded Airbrushes like Iwata and Badger while keeping the Compressor... Then use the budget airbrush for Priming and such.

I personally have the AS186 for a year and painted assortment of 15+ HGs and MGs with it. Used included China airbrush for a few kits before deciding to get a Sparmax Airbrush since I'm convinced I'll enjoy airbrushing

Branded Airbrush gives better control over the thickness of the line, better for pre-shading.

u/[deleted] · 2 pointsr/Warhammer

I'm kind of in the same boat although I haven't bought mine quite yet.

This is the model I'm planning on buying this month. It's a "pro gravity," does anyone have any experience with it?

u/YouFeelingItMrCrabs · 2 pointsr/Gunpla

Can anyone recommend a budget air compressor?

This is the one im currently looking at. I know most would say its better to just wait for a good quality one that'll last 5+ years but a budget one would be better for me to ease into air brushing given the fact I still have to buy paint as well.


u/matticusbradicus · 2 pointsr/Gunpla

You might be able to use that compressor if you have the right fittings. But remember it will be downright useless if you do not have a pressure regulator
I recently started airbrushing about 2 months ago, I purchased this kit
It's cheap, and it works. Not much more you need I suppose.

I first just painted a cheap high grade kit to get the handle on things, doesnt take long to get a feel for it.

u/citrus_monkeybutts · 2 pointsr/3Dprinting

Picked up this airbrush kit to take care of my needs and it works really well for a cheap kit. Does exactly what you need it to do and is great for doing a lot of big pieces. The only downside is the airbrush itself it comes with is mediocre quality, so upgrading in the future is something to look into.

u/mikey39800 · 2 pointsr/battletech

I bought this kit:

Warning, I have no other point of reference since this is my first airbrush. I chose it because:

  • This is a reasonable price for the whole starter kit.
  • 4 stars for this on Amazon is basically a "B" rating. 3 stars and under is almost guaranteed to be terrible.
  • I read reviews and determined the nay-sayers generally had defective products.
  • This compressor is said to be the best feature and you can switch out airbrushes as your skill progresses.
  • This model aligned with features I was looking for.

    Features I enjoy, that this one has:

  • Dual-action trigger - press for air, pull back for paint.
  • Relatively easy to disassemble and clean.
  • Strong, consistent pump.
  • Top-loading gravity feed.
  • Pressure is adjustable.

    What accessories you might want:

  • Ultrasonic jewelry cleaner for metal (no holes in the bath pan). This can clean pewter models as well.
  • Airbrush paints or existing acrylic paints that you can thin the appropriate amount (with a spout, like Vallejo).
  • Airbrush thinner (it's a good idea to match thinner brand with paint brand).
  • Airbrush cleaner (to supplement regular water, which is the primary cleaner).
  • Small glass mixing pot and cleanable eye dropper.
  • Little pipe-cleaner looking metal brushes.
  • Masks to keep particulate out of your lungs.
  • A work area that allows some amount of aerosol paint to drift. (I have electronics 2 feet away.)
  • Venting/suction table. (I don't have one, just half of a 2 foot tall box).
  • A model turntable with clips so that you can hit the target from every angle.
  • A bright desk lamp.

    What I didn't anticipate:

  • The motor is louder than speaking volume and is almost constantly going while the trigger is pressed.
  • Air pressure greatly effects the results and you don't always want a fast spray. 30 PSI > is recommended
  • Normal paints must be thinned down or you'll get splotches and clogs.
  • The needle is dangerous and fragile. Even re-inserting it forcefully can damage it.
  • Pay attention when disassembling it.... Some parts such as springs and levers may be unintuitive.
  • Cleaning can be difficult initially but it's good to do a stripdown between sessions. I actually enjoy it now.
  • Although you can mix paints in the brush, I have great results with a small mixing pot and an eyedropper.
  • Unmatched thinner/paint brands resulted in paint turning into.... micro-strings that clogged the device.
  • Too much thinner is just as detrimental. It turns into a watery mess that gets pushed by the air.
  • The pressure can blow lightweight models down or away without securing them with clips/tweezers.
  • Once you figure the whole thing out, the results are uncanny: Nice, smooth gradients, paint volume efficiency, predictable ease and consistency, quick drying times, the ability to use spray templates for camouflage, and most-importantly - controllably thin layers of primer and color to maintain the best amount of detail on the models.

    All in all, I spent less than $120. It took a month or so to get comfortable with the device and figure out the mixing or cleaning chemical proportions. Cleaning the airbrush properly is a big part of the process and I spend maybe 20 minutes doing a rinse, flush, stripdown, ultrasonic bath, and re-assemble after each session. I'm not sure if this is normal but this is working for me so far. Thinner to paint ratio for me is about a 1:3. A few drops of cleaner is used per session. I hope this write-up serves to either scare you/others out of a purchase or solidify the expectations before you take the plunge. Post some results when you get a chance!
u/DoctorHandwaver · 2 pointsr/radiocontrol

This one

Take some time to take it apart after the first use. You'll learn how it works and have a better ideas of how to run and maintain it. Also an appreciation for how everything works. Also you can use windex as a reducer. When I mix I go about half windex half paint. It really helps keep the flow going and gives a nice even coat.

u/ByZeus · 2 pointsr/Gunpla

i use this it gets the job done but have had issue with clogging but relatively easily to clean out/fix

u/copediv · 2 pointsr/Leathercraft

I used this lil guy. The gun has lever that controls the flow.

u/Klaidheamhmor · 2 pointsr/minipainting

Ah okay, I'm going to look at that one then. I actually saw what I believe might be the cheaper model of that one here and watched a couple of YouTube video reviews of it. From what I can tell, the difference looks mainly to be the compressor.

Out of the two of those, is it worth spending the extra $30 or so dollars for the larger compressor?

u/killroy225 · 2 pointsr/Warhammer40k

this guy, it's quite cheap and I'd definitely say that you'll wanna upgrade eventually, but as a learner/first it's pretty good! also buy a stand for it instead of cheaping out like I did...

u/zefmdf · 2 pointsr/Warhammer

When I was going to take the airbrush plunge I found a cheap kit on Amazon with a brush and tank compressor.

Came out to around $140. The only reason I stopped using the brush is because I'm an idiot and lost a tiny part, so I stepped up to a Badger. I still use the compressor and it works really well as far as I can tell. Gets hot after a long session, but it holds up!

The comments here are good, definitely don't break the bank right off the bat. Getting good with a cheaper brush will make a well made one really shine.

edit: another reason to start cheap is due to everything else you'll need to get. Thinner, cleaner, mask, maybe even some paints!

u/DrProfHazzard · 2 pointsr/Warhammer

I'm about 90% certain this is the one that I have. I haven't had much luck with affecting the flow of the brush. I know some people have been able to get airbrushes to spray over a relatively small area. This one seems to be either on, or off; I'm not sure if that's my fault or the brush's. But overall I'm very happy with this for a beginner's airbrush.

If you suddenly have trouble with it spraying properly and your paint is thinned pretty well, consider unscrewing the nozzle piece and checking it from the inside I've noticed that I'll get a buildup there that will allow airflow but not paint. Clearing it seems to get things back on track. And make sure to clean the brush after every time you take it out. Don't let it sit out.

Edit:. Would help if I actually linked the brush...

u/guy_via · 2 pointsr/Warhammer40k

If you want to just prime, base, and seal, this is more than you'll ever need, for cheap: Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

I love mine.

Also, if you want to upgrade, you could put an iwata on this compressor.

u/Vonnegut9 · 2 pointsr/ActionFigures

I just bought a airbrush/compressor set about 4 months ago and I'm in love with it. The reviews were good and once you get comfortable with airbrushing you can simply just upgrade to another airbrush and keep the compressor!

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

u/Chainsmoker977 · 2 pointsr/minipainting

I dont know about that kit but i bought this kit earlier this year and its been great so far.

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

Its a little cheaper than the one you linked ( maybe not after shipping). Its a gravity fed brush which is what you want. The one you link to looks to be siphon fed. The compressors look the same except your link has an additional tank which in my opinion is unnecessary.

u/15ykoh · 2 pointsr/Warhammer

Its on ebay, but I think that this might be superior:

I can get the airbrush separately for around 24 dollars if the compressor is not very good. It fufills most of interwebz criteria.

u/Wolly_wollen_weskit · 2 pointsr/Warhammer40k

This is the one I started with:

I still use the compressor but I've since upgraded to an Iwata Airbrush that I got for pretty cheap on sale last year. The compressor is on its last legs though.

I can tell you that I did not like the airbrush that it came with. It was cheap and got clogged a lot. But for what its worth it's still an airbrush and will give you a good start.

If you're going to use gw paints they have an airbrush line that I've had great success with, and they came out with their own thinner for air brushes called the air caste thinner.

u/PharmBert · 2 pointsr/Gunpla

I got and have been using this

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

I feel like it’s a great starting place. So far it’s worked great for me.

u/malevolentmc · 2 pointsr/InfinityTheGame

Ah, searching myself I see that. There is even ones for the same price that I paid that come with more..

But this is it:

u/JaguarDaSaul · 2 pointsr/Gunpla



Pick one.

This one gets brought up a fair bit as a decent-ish cheap kit to start airbrushing with. QC isn't the greatest though.

Tamiya TS Sprays are good, might carry them.

u/EmotiveBubble · 2 pointsr/airbrush

I realize you said she already had done the "kids" pumping version of the airbrush, but there are also a couple versions that are battery operated.

Crayola $19

Alex Toys $17

If you were serious about it not being a toy however, there are some cheap alternative systems that wouldn't be good for an adult trying to get serious but for a kid should be more than enough.

Master Airbrush $80

u/NvBlaze · 2 pointsr/Gunpla

Depends on your budget, I'd recommend getting quality tools from the get go, if you can afford them.

Decent starting setup would be TC-20T compressor (or equivalent, there's a bunch of similar compressors coming from the same chinese factory) and either Neo for Iwata, Badger Patriot 105 or H&S Ultra. All of them offer good performance and will last you quite a while. Personally, I'd go for Ultra simply for the ease of maintenance.

If you're on a really tight budget, you can look for some cheap chinese kit. Not the highest quality, but it'll do well enough as a learning tool.

u/shovellovin · 2 pointsr/killteam

My eyesight isn't as good as it used to be and like you I took an approximately 20 year break from painting. I use this -

It really helps to see details while painting.


As far as the white goes, I'd recommend getting an airbrush. Then you can lay down a nice and smooth white basecoat on a squad in minutes. Then you just have to pick out the details. I used this basic airbrush setup -


Welcome back to the hobby! Continue to keep us all in the loop with your progress.

u/mykiel · 2 pointsr/Warhammer40k

If you are ever looking, I picked up this one. Works really good for priming and mass base coloring with some shading.


u/gabrielleigh · 2 pointsr/billiards

I haven't personally tried Solarez, but I've heard from other cuemakers who have tried it that it was "just ok".

I have tried several epoxy finish techniques in the past and I've struggled to get it to really bond well with bare woods. I had better luck basecoating the bare wood with superglue, then finishing with epoxy over it.

The most annoying thing with epoxy finishes is they seem to bubble and separate from the underlying wood a lot easier than auto clear. I've had the best luck with automotive clear which I spray on with an airbrush. I found a good kit on amazon that comes with a compressor and a decent airbrush. I've used this kit for about three years now and it's been great:

Master Airbrush

I buy my auto clear in the smallest cans possible. The clear I use is two part. Four parts of clear mixed with one part activator. I use cheap plastic drinking cups as mixing containers and I bought a bulk pack of pipettes to mix up the small amounts of clear you use for cue finishing.

Disposable Pipettes

Make sure your plastic mixing cups are recycle code 1 or 2 (polyethelene) which is resistant to solvents. Recycle code 5 and 6 (polyprop or polystyrene) melt immediately when exposed to solvents. I buy the cheap clear party cups at the store and they work fine.

I thin the clearcoat quite a lot with lacquer thinner, especially for the first coat so the clear soaks deep into the surface and gets a good grip to build subsequent coats onto.

If you do try the Solarez, let me know how you like it. I've been paying attention to other makers impressions of it but most go back to their prior method after trying it on a few cues.

u/eudisld15 · 2 pointsr/3Dprinting

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

Thats the one there. Get some acetone to clean out the airbrush between paints. You can get some really fine minute details with the right tip and some practice.

u/Tabletop_Tendencies · 2 pointsr/Warhammer

[master airbrush](Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

I bought this and it serves its purpose. Ive since upgraded to a different brush.

u/SolarisGaming · 2 pointsr/Warhammer40k

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

u/astrozombie2012 · 2 pointsr/Warhammer

I got this and I’m pretty happy with it... eventually I intend to get something nicer, but it works well and seems to be decent quality. The compressor I’m not so sure about though.

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

u/The_EOC · 2 pointsr/modelmakers

I bought this one off Amazon and it’s been pretty solid with similar results to OP.

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

u/Stayalive007 · 2 pointsr/Gunpla

This is the airbrush and compressor I currently use. I just started out doing it about a month ago. If you go for the same brand $150 set, you get the 3 types of airbrushes and some starter paint!

I like it a lot, only negative I have is there are no real clear instructions provided with it.

u/TheNumberJ · 2 pointsr/Warhammer

I think I want to try getting into airbrushing, but no nothing about what is good.

Do you think this would be a good starter kit?

Also, I read somewhere else on this thread that if you use GW paints you need to thin them with some sort of alcohol?

u/Slushie_Kirin · 2 pointsr/Gunpla

(Amazon link for specific model) Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

u/Sixtyhurts · 2 pointsr/Warhammer40k

My wife and kids got me THIS KIT for my birthday. It works great!

u/wind-raven · 2 pointsr/airbrush

If you don’t have a compressor already go with this kit as a starting point. There are other options of similar kits with more stuff, but this is as basic as I would go.

If you already have a compressor I got this one. There are other kits with different needle sizes for not much more if you want to go to that. For me, I figure if I want a different needle size I’ll be to the point of getting a better airbrush so I went with the single needle.

For paints I like Vallejo game air. The badger air paints are good on paper but on minies they are a bit thin on coverage.

u/WarbossTodd · 2 pointsr/Warhammer

So here's why I switched to an Airbrush:

  1. Primer: I live in the PNW and our winters are cold and wet. Standing outside in my garage with a rattle can for primer sucks but then waiting 30 min + sometimes (because of the cold and humidity) is worse. Airbrushing primer on takes seconds and you have more options for colors.

  2. Base Colors: With an airbrush the process of getting a smooth and even base coat is fantastic. For the first time I'm doing Imperial Fists! Doing a yellow basecoat is one of the most difficult things you'll come up against but an AB makes it simple and way less frustrating.

  3. Stencils: I just ordered some Ork check stencils and I'm excited to add them to some looted wagons soon.

    An airbrush doesn't have to be a huge investment. I started out with this set

    the compressor died after a month but TCP replaced it in 2 days. It's a small investment but one that will make you much happier
u/caturdaynauplz · 1 pointr/Random_Acts_Of_Amazon

what about this set to start with like a different actual airbrush?

u/Cherrycat · 1 pointr/Gunpla

I own this kit. I've been futzing with it for months, but I'm still afraid to use it on an actual kit. lol The compressor is really quiet, and while it's not name branded, it really does the job well. the brush also works well.

u/jeonhjun · 1 pointr/Gunpla

I'm struggling to airbrush Tamiya X-2 Gloss White. I continue to get an orange peel look or it comes out way too thick. I'm always running into dry tip when trying to paint Tamiya X-2 Gloss White.

I am thinning it with Tamiya X-20A. I always thin it to a milky consistency. I tried spraying it between 10-20 PSI. I'm using an Iwata NEO CN airbrush and a cheap compressor. I am at a loss for what I'm doing wrong.

u/bbeongchijima · 1 pointr/Gunpla

Currently having some airbrush troubles. My first session with my airbrush went perfectly well. The paint looked smooth and nice. During my second session (1 week later) the paint started to have these micro bump look. My airbrush wasn't sputtering either.

These are some of the problem solving I tried.

  • Thinned and de-thinned my paint.
  • Checked for clogging.
  • Took a part my airbrush and cleaned all the parts.

    I'm at all lost. Hopefully, you guys can help me out.

    Here are some other information.
  • This is the airbrush I'm using.
  • Using Tamiya Acrylic. Thinning with X-20A.
u/Gaytrox · 1 pointr/ageofsigmar

Yeah no problem man, was kinda talking out my ass there before because I didn't have any pictures other than some slime and a low res scythe. Glad I could finally deliver.

I've got to also repeat back a tip I got from another painter and recommend an airbrush as well, because using it blew me away.

That's the one I got about two weeks ago. Bought it and airbrush cleaner fluid (a mask is also recommended, I had one laying around) and have had a lot of fun with it. For years I had been intimidated by airbrushes because of the cost and seeming complexity, but after finally deciding to take the plunge and make the investment in one, they're not as intimidating as they seem to use and maintain. It's a whole new world of painting to explore. And it saves me so much fucking time when it comes to painting and shading my models well with an easy to learn but hard to master technique called "zenithal highlighting". I stripped some old rats and got 40 of the above rats done in 1 six hour sitting. Sure, I need to go do some detail work eventually, but the rats in the pics above would have taken at least twice as long for me to have gotten to the same point the old way, with a far worse result. The reason I am mentioning it now is I think there's a lot of potential to create glowing and flame effects with it. I did a trial run there on my rats using Vallejo livery green air to create the illusion of light shining on them from their warpstone spears. Maybe you could create similar glowing and/or shining light type effect with the fireborn?

u/maratxtv · 1 pointr/Gunpla

I got this as my airbrush starter kit, and it's great. Everything you need to get started :

I also suggest buying some spare needles and nozzles because they get bent and broken; especially when you're new and don't know your way around the brush\how sensitive things are:

Good luck!

u/saikron · 1 pointr/Gunpla

I just bought this, and it's great for me. It has a .5mm tip which would probably be considered large - they're usually .3mm. That big honkin' tip means I can blow any paint through it with little or no thinning.

I also bought the Master starter kit for like $70 that comes with a working compressor and crappy airbrush. Honestly, if it could blow the glittery createx crap that I use it would have been perfectly OK for gunpla. My plan is to use this compressor until it burns up (reviews say it will).

u/TarmacFFS · 1 pointr/Gunpla

It depends on how invested you want to get. If you want a very good airbrush, get an Iwata, Paasche, or a Badger. I have a Badger, but I end up using my son's Master Airbrush most of the time because I don't need superfine detail for Gunpla. He has this kit and it has served both of us very well.

TCP Global also has great customer service. Or at least, their customer service to me has always been fantastic. It's a great starter kit that can be expanded later on with an external tank or a better airbrush. But for the price, it's a great value if it's in your budget.

u/bonersaladbar · 1 pointr/Gunpla

I'm working on my first air brushed kit. I'm not a patient person and as a result of that I got this It'll air brush, alright but the psi is about 18 when going full and when it's spraying it drops to about 10. It does okay and I feel like my purchase is justified, just barely. So yeah, live and learn.

u/Acepk · 1 pointr/Gunpla

I have been using this for years. Its a great price and has everything you need. I got it on amazon is about $80 US

u/Carkereb · 1 pointr/Warhammer

Well if you get an airbrush then it can be used to replace the base coat without the need for a primer coat...they can put down a really beautiful powder coat in a short time that is difficult to replicate with a brush, especially on large flat areas (imo)

I wouldn't get one until you're buried in models honestly...I was about 60-70 models deep before I decided to get one cause I really like the hobby, its an investment if you find you actually like painting or want to build an army to play with.

That warning aside there is a cheap set available on Amazon for $80 if you have prime that I bought, since it comes with a compressor, that I have had no problems with. You have to give it a break after 15-20 min or so to cool off bc the compressor gets hot but I havent had any serious issues with it at all. The brush is not very detailed but its a great practice brush for beginners and dosent cost $400 or more like a real pro brush will. You need practice with a cheap one before getting one of those or you wont be able to use it to matter, like months of practice I'm still learning the intricacies and I paint a lot.

The other difficulty an airbrush introduces is paint. Out of pot paints will not work in an airbrush. They need to be thinned SUBSTANTIALLY or the brush will clog up and need to be thoroughly cleaned before it will work again. It's incredibly frustrating and happens a lot when you're learning how to thin paints to keep them thick enough to make a not watery coat but thin enough to not clog... best bet is thinner is safer, it takes less time to apply 10 coats than clean your brush (maybe a small exaggeration but it really is a 0 production time waster) Vallejo makes a Model Air brand that is prethinned, I would recommend using those whenever possible, or at least for black/white since you will use those colors a lot (also the GW white primer is often watery and can't be used as a white layer like the black primer can...that stuff makes your models BLACK...) unfortunately they don't make their entire product line in Air so you're going to have to thin your own paints somewhat often. I would highly recommend buying a pre-made model paint thinner from a hobby store/website instead of trying to use the cheaper option of 50% Isopropyl Alcohol, the pre-mades also have some chemical that acts as a 'flow optimizer' which just works better than IPA.

TL;DR: 1. Buy Models

2. Paint^some Models

3. Buy More Models

4. Repeat 1-3 until Buried in Unpainted Plastic Krak

5. Buy Airbrush

6. Finish Models, go home and rethink your life.

u/Jdwigg · 1 pointr/modelmakers

I have ordered this one, it's cheap and has good reviews. So if I don't like airbrushing, I didn't spend 300 to get started. Ordering it in a week or so .

u/AznSensation93 · 1 pointr/Gunpla

This one. Master airbrush, it's my first airbrush set up, but I've painted a few kits already. I like the compressor, the airbrush gets the job done, pain in the ass to clean though.

u/JPong · 1 pointr/Warhammer

You don't need one with a tank for them to be quiet though.

I use one like the one in this kit and it's quiet enough where I can watch TV while painting without issue. It's quieter than my washing machine, in another room, on the other end of my apartment behind a couple of closed doors.

They also have a very small "tank" that charges up quickly then the thing shuts off. The tank is only good for like 3 seconds however. They do have some issues with extended, constant use and heat however. Over 2 minutes or so of constant use the tank will generate too much heat.

Not that model specifically, it just looks like it.

u/HeyUOK · 1 pointr/Gunpla

the master airbrush set is pretty solid airbrush. I wont be able to tell you of quality of the airbrush since its my first airbrush but its under 100.

u/Hornady1991 · 1 pointr/minipainting

If you want to get started, this isn't a bad way to do it. it's a cheapie and you will outgrow it fast, but it's a great way to get started and figure out how it all works.

u/joelom · 1 pointr/Gunpla

Looks good! you should try painting a cheaper master grade. i got this cheap airbrush and it rules. its make painting so much easier. i just started and my first set of painted parts look awesome. plus it ends up being cheaper than cans.

u/Rosc · 1 pointr/Gunpla

This is the package I bought, though I eventually ended up replacing the airbrush with a badger.

A couple things of note: Most of the master airbrushes are just cheap Iwata knockoffs, and they're frustrating to take apart if you have any problems with them. Also, I have a hard time spraying if it's humid, because the moisture capture in this compressor isn't very good and it will eventually start spitting water up through the line.

u/BullWizard · 1 pointr/minipainting

Thanks for this! This is really helpful. I love painting, but have always been pretty much self-taught through trial and error. Given the cost of entry for airbrushing, I'd like to enter on the lower end in case I don't like it, but also if low-end equipment is garbage, then I don't want to spend what I would have on 1 nice set buying 2 shitty ones. So your suggestions help me a lot!

From a quick google search, it looks like this is what you were suggesting, is that correct?

Thanks again!

u/Adeno · 1 pointr/Random_Acts_Of_Amazon

Yay congratulations for getting an awesome Christmas gift lol :D I wish all bosses were like that :D

Hmm let me share a few pictures/videos of items with you that you'd probably want to try out with me :D

A. Master Airbrush Kit

First of all, have fun with art using a Master Airbrush Kit :D When it comes to giving art such as drawings, sculptures, or any of your creations color, the airbrush excels at giving you total control of how light or how deep you want the color to be :D It allows you to give your work a beautiful subtle transition from one color to another :D Very easy to use, extremely fun for the whole family :D The price is also very affordable compared to other airbrush kits! The Master Airbrush kit from Amazon is only $79 and that already includes the airbrush itself, the air compressor, the hose, and everything necessary for it to work :D Normally, airbrush kits cost around $300 to $500, but fortunately the Master Airbrush kit is a very good and functional budget version that works just like the more expensive variants :D

Oh let me show you the airbrush in action... and a baker lady is using it on a cake instead of sculptures or paper or toys :D See how easy it is to control? It allows us to make a color go from light to deep, very great for those subtle changes from our artistic imagination :D

Here's another awesome cake airbrushing and cake creation, this time somebody's making a dog cake lol :D

Whether it's cake, sculptures, paper, or toys, a Master Airbrush kit is going to bring us a lot of joy as we paint our creations :D

B. Instamorph Moldable Plastic

Here's another fun item we can both try and explore :D It's called the Instamorph Moldable Plastic :D Basically, it's a bunch of plastic pellets that you can soften in hot water. When it's soft enough, you can then shape it into anything as if it's clay :D It will solidify again after a few minutes and it's very durable :D It's also reusable, so for example if you didn't like what you made, you can just put it back into the hot water and it will soften up again :D SO AWESOME! :D It's pretty affordable as well because it's less than $20 :D

You can use it to create little toys, accessories, or you can even use it to repair broken things at home! One reviewer on Amazon even said they used it to create a false tooth and it was functional and fitted him/her well lol :D

Here's a lady showing how Instamorph is used :D You can even use molds to shape it, so awesome and fun :D

Here's another video showing another brand all sorts stuff we can make with the material :D

Here's someone who actually made a fake tooth from the same material Instamorph is made of haha :D

We can create all sorts of fun stuff with it, let's grab some :D

C. Smooth On Silicone Mold Making Rubber Oomoo 30

Oh YES :D Since we're gonna create lots of fun stuff, we also need a way to create a mold so we can easily recreate our shapes without having to redo them from the very beginning :D Here's Smooth On Silicone Mold Making Rubber Oomoo 30 to help us with that :D Fortunately for such a useful item, it's normally around $25 to $30 and we can use this many many many times :)

This is possibly the most well loved mold making item that every fun loving creative person has :D Just mix the two parts, pour it on the item you want to make a mold out of, wait a couple hours and that's it :D

Here's a video of Smooth On in action making a mold out of an action figure :D So cool! :D Imagine all the items we can create with Instamorph, we can use Smooth On to make molds out of them and recreate them easily :D We can just push the soft Instamorph into the mold and we'll have the items we made once more :D

Of course, we can also make an item out of silicone so we can have some kind of soft stretchy item :D Look, some people make props using them... like horror gore hands lol :D

D. Bubble Head Nurse from Silent Hill 2

Let me welcome you to my beloved world of toys :D Here is something I like that you might also enjoy :D It's the Bubble Head Nurse from the horror game Silent Hill 2 :D

In the world of Silent Hill, the main character gets transported into an alternate world where scary creatures and the undead wander freely. One of them is the iconic sexy Bubble Head nurse. At first glance, you would notice her very attractive body from a distance as the shadows hide her face. As she gets nearer, you'll notice that she's holding a knife or a metal pipe, ready to lay the smackdown on you... and then you see her horrific face! OH MY LORD :O It's a zombie disfigured nurse!!! All the excitement that you might have had from your little nurse fantasy gets ruined and you remember that in a world made up of nightmares, there is only despair and dread :D

Here's a video review of the super sexy but scary Bubble Head Nurse :D

She'd be so fun to put on desks and all sorts of places haha :D She's really cute isn't she :D

E. Kenshin Himura from Rurouni Kenshin

This one's something very personal to me, but you might also like him once you learn who he is :D His name is Kenshin Himura from a show called Rurouni Kenshin aka Samurai X here in the USA :)

I really loved his show back during my teenage years. He has a very interesting story and he's just so awesome!

Kenshin Himura was a samurai used as an assassin by the Japanese government during the Meiji era. Anybody who opposed the Japanese government back then, Kenshin heartlessly killed. He really was the best and most skilled killer of the time.

One day, he was tasked to kill a person that the government wanted to get rid of. That person was supposed to get married to someone, so the two of them fought. All throughout Kenshin's career as an assassin, he was practically untouchable, until this moment when the opponent somehow managed to slash at his face to give him a scar in a last ditch attempt to survive so that he'll be able to marry the girl he loved. Kenshin finished him off, but suddenly, knowing that the person he killed was about to get married somehow affected him and he felt some guilt.

Later on, he met a girl whom he fell in love with named Tomoe. Her affections slowly transformed his ice cold killer's heart into a warmer human one that has become capable of giving value to people's lives. Unfortunately, it's later revealed that Tomoe's actually the fiancee of the previous person he assassinated and she was actually out for revenge with the help of an opposing group. Still, despite her original intent to avenge her first lover, she also fell in love with Kenshin as a person.

Tomoe revealed the group's plan to kill him, but the battle already started. Later on as Kenshin's being beaten up because he's unable to see clearly anymore and he was about to get killed, Tomoe stepped in the middle of the fight to grab the enemy's weapon, but Kenshin didn't know she was there and he stabbed right through her and the enemy. Tomoe sacrificed herself to save Kenshin, but in the end, she gave him another scar on his face as a symbollic message that he can repent for his past sins by never killing again and using his skills to help people instead.

From then on, Kenshin started wandering Japan, helping random people with their problems. He still uses his sword to fight, but he uses a modified sword with a blunt edge so that he'll only knock out the bad guys and not kill them. He also has become a friendlier and more cheerful person because of the positivity that Tomoe gave him and that's how Kenshin finally started making friends.

I really love the story of Kenshin because it tells us that even the worst person can change once he realizes the true value of his own life. If you learn to love yourself, then you will learn to love others. That is the core message of the Rurouni Kenshin series and it's very true.

Kenshin's story is very inspiring for many people because it tells us that there will always be hope even if you did some truly horrible things in your life, as long as you're prepared to take responsibility and contribute to society in a positive way. Even if you started out life as a very bad person who can't find happiness, once you open yourself up to others, you'll find beauty in this world and happiness as well.

Another plus is that the original opening theme song is awesome haha :)

Well that's it from me, have fun and thanks :D

u/Casual_Salmon · 1 pointr/Warhammer

I appreciate it man, I'll be sure to check out those color settings. As to my airbrush I have this one: It is currently still in its box but I will be sure to include info on how that goes and what I think about the airbrush in my next post.

If you'd like, I can give you a sneak peak into my next project. Just let me know brotha.


u/wjapple · 1 pointr/Gunpla

if you have any other beginner questions, dont forget to post them here

this is a great Airbrush starter kit.

I got one a little over a year ago and it has held up really well for the price.

I would recommend using Tamiya Acrylic paints, thinned either with alcohol based thinner, or lacquer thinner.

you will also need a spray booth, a DIY booth would be the cheapest route but many folks go for this one and it seems to do the job.

there are many other supplies( respirator, pipettes, alligator clips, skewers, etc) you can pick up but those are the big items to get started.

u/peteypops33 · 1 pointr/modelmakers

Thanks for the advice. What do you think of the bundle in the link? I know the brand isn't one of the ones you mentioned, but I could always upgrade the airbrush for a better one down the road...

u/placeboeffect27 · 1 pointr/KingdomDeath
u/Greystorms · 1 pointr/minipainting

This kit is what I started with, except that I got a Badger Patriot 105 as my starting airbrush(on sale at Amazon for about 50% off). That compressor has served me well for almost a year now, and it's fantastic for basecoating, priming, etc.

Don't forget that you'll probably also want a spray booth, and you'll need a respirator(don't breathe aerosolized acrylic paint).

I've used GW paints in the the airbrush; it works but requires thinning. "Always thin your paints" is even more key than when brush painting; how much will vary depending on brand, color, specific pot of paint, etc etc. I also use Vallejo Air paints and occasionally spray P3 paints through the brush.

u/bittenbyserpents · 1 pointr/StarWarsArmada

Can you recommend a decent setup? I have looked around and read reviews but have not decided. I was looking at these two but do not know if I should spend more for something that is not a beginner level.

u/inn0cent-bystander · 1 pointr/Gunpla

WIP as promised. I'm not finished yet. I still need to complete the panel lining and add on a coat of future.

It's not -too- expensive to get into, but it is a bit of up front investment, as you need something for ventillation(search amazon for spray booths or you can look up how to slap one together with a box fan(I may do this at some point to get more space and get more cfm through the filter). I went wit a slightly more expensive kit that came with 3 brushes(so I could horse around and see which I preferred): but you can save ~$10 and go with

u/jdougie9115 · 1 pointr/Gunpla

I bought that one, and for a beginner I think it works well enough and gets the job done. I've only had a few issues (really just one on multiple occasions) with it but nothing major, mostly just after a good cleaning. That being said I do eventually want to get an Iwata. But I recommend the amazon bundle first just for practice and getting the feel of it.

u/WatermelonManus · 1 pointr/Warhammer40k

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

This is what I’m using. One of the cheapest on Amazon. It’s worked flawlessly so far.

u/Marsdreamer · 1 pointr/minipainting

Would something like this work?

Or should I bump it to the $120 Deluxe version?

u/ajqx · 1 pointr/airbrush

I would suggest something like that for the lowest price:

I think the compressor will be good , the airbrush will be enough to start. If she really likes it she will just have to upgrade the airbrush. The compressors comes with a water trap built in. Get some airbrush ink set and you are good !

u/holocause · 1 pointr/Gunpla

If you are decided to go with Master, just get this one.

All the Master airbrushes are just "okay" so having those extra 2 brushes is just bloatware. All you'll really need is the dual action gravity feed type anyway. Once you've gained enough experience and have saved up enough money you'll ditch that G25 eventually and go for the more high performance quality branded ones.

The 20 bucks you saved on that version you should put into getting those airbrush cleaning bristles and airbrush lube.

u/dadboat · 1 pointr/Gunpla

I bought this. It's great for straight painting, but, so far haven't gotten good results with the brush with line work. Still practicing. The compressor is fine though, and, some of the guys here I know use it with their nicer brush for very good results.

u/televided · 1 pointr/Miniswap

For learning Airbrushing, the Master Airbrush kit on Amazon is perfect for that.

I have used this kit for 2.5 years now and having used an actual Iwata Eclipse (that this brush is a clone of) I can tell you without a doubt the only difference is the maintenance is more difficult on the Master brush.

If you pick one up, feel free to DM me if you have questions.

u/chhappy7 · 1 pointr/Gunpla

Selling - prices do not include shipping shipping will be via USPS flat rate, either small or medium (airbrush stuff probably large). Let me know if you want me to include box art and/or manual as well.

* RG Strike Freedom Wing of Skies Bandai - $20 I already tried it on for my RG SF

* RG Strike Freedom - $10 panel lined, decal'd. Parts of gold frame painted with gold

  • MG Unicorn OVA ver - $40 decal'd no panel line or top coat or paint; includes a Chinese knockoff Armed Armor DE

    * Master Airbrush® Brand Airbrush 3 in 1 Cleaning Pot-air Brush Holder-paint/car - $5+shipping; used once with the airbrush set link

    * Master Airbrush® Brand Portable Hobby Airbrush Spray Booth - $60+shipping; used once with the airbrush set; link

    * Master Airbrush Brand High Performance Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor - $60+shipping; used once to put primer on a few parts for a car kit. link
u/randomisation · 1 pointr/Warhammer40k

I've been airbrushing for a year or two now.

Here's what I'd suggest.

UK =


These kits give you a basic brush and compressor.

If you want to get a good brush, look into Grex Genesis brushes. Amazing quality and not too costly.

Stay away from the Iwata Neo, as it's not worth the money (pay the extra for a grex).

H&S brushes are my favourite, but they are very expensive.

u/Cajuncrawtator · 1 pointr/rccars

That looks just like the one I am looking at by a different company. it's a lot cheaper than your set up though.

EDIT: this is what i am looking at getting.

u/catcastles · 1 pointr/Luthier

This is one that I was looking at; contains the airbrush and compressor?

u/yellowjacket700 · 1 pointr/Gunpla

Here ya go The airbrush is not the best but the compressors great I'm still using it. The only thing with it I recommend is to disconnect the hose for a little bit and let it run just to get the water out of it.

u/notraffic · 1 pointr/Gunpla

For anyone who's used the Master TC-20 compressor which comes in this Amazon bundle:

Mine doesn't seem to work (pressurize?) at <20 psi. Over 20 works fine. Does yours do this too? If so, is this described in the specs somewhere? I've been using it for a while but I didn't try looking into this until now.

u/Newman4185 · 1 pointr/airbrush

Airbrush/Compressor used: From Amazon

First I disassembled the controller, then sanded it with fine grit sandpaper. I used opaque white (Createx 5212) as a base coat. Once dry, I proceeded with Fluorescent Violet (Createx 5401) in two coats. I then applied 3 layers of gloss top coat (Createx 5604) with a heat gun application in between.

u/yamirzmmdx · 1 pointr/Gunpla
u/vulcanfury12 · 1 pointr/Gunpla

I have a question about buying stuff from Amazon.

I'm in the Philippines and I want to buy this kit:

Found it from the Wiki, and it's WAAAAAY cheaper than sourcing locally. There are two versions of the product from that page. The Standard and the Deluxe. From what I can see, it's the Deluxe where the compressor comes with a tank so I want that. Questions:

  1. On the right side of the page for the Standard version, it says This item ships to Philippines. Want it Thursday, Nov. 8? Order within 11 hrs 12 mins and choose AmazonGlobal Priority Shipping at checkout. This is not in the Deluxe version. Is there a way for me to get the Deluxe version delivered to my door?
  2. Adding the Standard kit to the cart says it is eligible for free shipping. How free is free? Do I still have to contend with duties and taxes?

    I'm no stranger to ordering stuff online, but what I have used before were all using local currency, and the only options I had to set on check out was the mode of payment (either cash on delivery or credit/debit card). Using Amazon is kinda daunting for me.
u/number75 · 1 pointr/minipainting

My own 2 cents, but I'd recommend running an extension cord up to your hobby area as u/Tannaros1 suggests or to buy a cheap airbrush compressor much like u/M6453. If you haven't purchased an airbrush yet, you can get a rather decent starter set off amazon (Compressor+Airbrush+Hose) for less than a hundred USD

Personally, I'd recommend getting a dedicated compressor or running a line to your hobby area. I will say I'm against CO2 Cartridge/Canisters. Environmental impact aside, one of the key basic Airbrush skills is controlling the pressure output. A Cartridge or Smaller tank may have dips or fluctuations in pressure which could prove to be less than ideal when airbrushing. If you do buy a large refillable tank, I'd still suggest a moisture trap/regulator combination so you can keep an eye on the pressure and prevent moisture buildup.

u/Easy_senpai · 1 pointr/Gunpla

Oh great wizards of plastic! Newb airbrushing question. I am stuck on trying to decide which is more worth it for gunpla. I have found these two are decently off, but one comes with a few extras. I just do not know if the extras are needed for the extra price. Here are exhibit a and exhibit b. What do you lot think?

u/julioninjatron · 1 pointr/Gunpla

phew! glad I asked lol. I have found a few other models on ebay. what should I be looking for? another example:


Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

is that 2nd one closer to what I need?

u/SirSeath · 1 pointr/Warhammer40k

Thanks for the info, astrozombie had this as a suggestion, here, not sure if this is a good starting set or not.

u/Brutal_Boost · 1 pointr/airbrush

Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor

That's the one I got.

u/DrStalker · 1 pointr/airbrush

You're not going to get a good setup for under $100, but you can get a functional setup to get started and upgrade later if you want.

What did you get from masters? Was it something like this kit because that's probably the best sort of thing to get at the cheap end to get started, and once you learn what you're doing/how to clean & maintain tings/what you want from an airbrush you can upgrade.

In what way was the airbrush not working? And for paint lures are you using acrylic paints or something more involved to work with?

u/XnFM · 1 pointr/minipainting


You might be able to go cheaper than $80, but you want a compressor with a tank to consistent flow. This is the kit that generally gets recommended as a starter kit for beginning airbrushes.

u/rema_N · 1 pointr/Gunpla

I think I'm ready to start airbrushing, so is this airbrush a good beginner one?

If this isn't good, what other semi-budget ones would you guys recommend? Thank you for any help.

u/pendulumss · 1 pointr/minipainting

This is similar to the set I bought. They have tons of packages.

u/HeyItsJay · 1 pointr/Gunpla

Don't be afraid of starting :P

I myself started with the Iwata Neo CN Gravity Feed and I loved every bit of it (Though here when I bought mine it was around $45 USD with a Coupon at a Local Hobby Store)

This Compressor is what I use and it is great, plus if you get it it'll come with an Airbrush :P

(And if anything you can just buy the Compressor/Airbrush set and yoou are good to go)

I've only Airbrushed twice and both I've been pretty happy with the results. You don't necessarily need to start with something pricey.

u/DrStephenFalken · 1 pointr/xbox360

For starters you're going to need an airbrush system

Then you'll need paints obviously, your standard painting supplies: self-etching primer, cleaning pads, gloves etc.

u/Treefiddyt · 1 pointr/Gunpla

If you are going to go that right i'd try this.

I bought a masters brush as my first and it was actually amazing for 25$ that i paid. obvious buying a cheap airbrush you could have issues so always something to keep in mind.

IF you or your family already has a cheap air compressor (pancake compressor) then you could use that and just get the brush, fitting, and moister trap. I'm currently using a pancake compressor. It's really loud... but it keeps the job done.

Also, do not go with enamel. Acrylic will be the paint you want to use. It will be the easier and safest. Tamiya is a good one if you can get your hands on it. Tamiya is a hybrid paint, but its relatively safe. If you use lacquer or enamel you will have to have good ventilation and use a respirator. With acrylics you can use 90% alcohol to clean your brush or look up cheap mixes that people have come up with themselves.

u/JustM7 · 1 pointr/Gunpla

I've got a question regarding my starting airbrush. I'm comparing the Badger 105 to a Master.

I don't have a compressor and I do plan on using an airbrush for multiple kits over the year, but I don't think I'll be able to upgrade for a while. If I buy the Master, I'd assume the airbrush would have problems before the compressor, but hopefully it would last long enough for the upgrade. Can I use the compressor from the Master kit for the Badger 105 (upgrading to the Badger later)? Also, does anyone know how long their compressor has lasted?

u/gunplanium-alloy · 1 pointr/Gunpla

I too would appreciate this.

Not Black Friday but I was recommended this compressor and this air brush on the Discord channel yesterday.

u/Gungyver · 1 pointr/Gunpla

I do not like to use spray cans form bad passed experience when i was five or six. However, a lot of people use spray cans, however you can also get good results justusing hand painting.

A descent airbrush starter kit, starts at around 80 bucks

Gravity feeds are what i prefer to use but they do take some time to clean when you change paint colors. However, reservoir feeds are faster to clean but for myself they are a bit harder to maintain.

This set is about 100 bucks but it comes with both types of airbrush.

I have tried several brands of airbrush paints and i like Wicked colors airbrush paints the best, they are also made in the USA and are self curing water based. they can also be used as hand paints if you want to go with self made colors. here is a link:

if you do go with mixing your own colors, I find that using a small digital scale, to measure the paint's weight is the easiest way to reproduce the colors you make.

Ether way I recamend that you to get some primer ether way as it allows the paint to adhere better to a gunpla. I like to use Vallejo Grey Primer which you can also paint on with a brush.

u/InquisitorJames · 1 pointr/Tyranids

This is the one I use, it's a good starter set with a decent brush and compressor.

It can get a bit pricey to start up though, you'll want to get airbrush thinner (I use Vallejos), and I cannot reccomend dropper bottles enough over the pots citadel paints come in. Not just for airbrushing but just day to day painting is made so much easier.

You can get really great quality ones for like 38 cents each shipping is a little expensive though.

Another great thing is you can run vallejo primer straight through an airbrush too and never have to deal with rattle cans or accidental shitty prime jobs again.

u/heeroyuwee · 1 pointr/Gunpla

I agree with HeyUOK. I got the master airbrush kit because it was affordable and had everything to get started. I quickly upgraded to an Iwata airbrush, but the compressor w/ regulator is still working perfectly fine.

I got this and then the iwata hp-cs for $120. So about $200 for the whole airbrush setup.

u/Rflewelling · 1 pointr/Gunpla

Thanks so much. After i posted I went to amazon and was looking at some airbrush sets. They aren't as expensive as i thought. I am literally going to be painting the frame gold.. I am not planning on painting anything else. I might paint the DM MG Destiny Heine's frame some sort of metallic color.

Would a $60 or $70 airbrush kit that's got 4ish stars be worth it for what I'm looking to do? Suggestions near that price range too if possible?

I feel like this will feed my gunpla addiction, but keep my display case not as cluttered.

u/yoyobrains · 0 pointsr/Gunpla

This is definitely not going to be any better than hand-painting. A cheap airbrush and compressor set off Amazon is maybe 50 to 80 dollars, will give much better quality, and you will be able to use the paint that most people are using already to hand-paint parts.

I got a $80 one [here] ( as my first and painted a model that placed in the GBWC a few years ago.

A friend of mine got this for $50 and gets comperable results. He hasn't had any complaints about it going on a year and a half.

u/rx-0custom · 0 pointsr/Gunpla

Ok so I would start with a cheap airbrush and compressor. Go with master to start it's what I tell all my friends who are starting up. You don't want to buy a expensive airbrush and compressor combo and Ruin it cuz your not use to Airbrushing. I ruined my first airbrush Cuz I didn't know what I was doing good thing it was cheap and I had used it for a few years before a nice Gravity feed :). I would start with this nice and cheap :) you should get a nice feel for it but please do some more Research on your own as well.