Best adhesive sheets according to redditors

They sell precut mini mirrors if you have a square shape, but I couldn't find any in the size I needed.

I bought these: https://www.amazon.com/gp/aw/d/B01BU99K6E/ref=yo_ii_img?ie=UTF8&psc=1

They work pretty well as long as you apply it perfectly flat. Otherwise you get sort of a fun house mirror effect.

Sure,

well theres three types of labels, printed cans( cant do anything with )

Wraps ( plastic that has a seam) you can cut these but you have to cut the seam and then snip the top and bottom ring area then it will flatten.

Adhesive labels. ( these work best)

I try to use the edge of an xacto knife or even a fingernail on a part of the label that i know ill maybe trim a hair off of anyway , so that it hides any crinkling.

there are a few companies that its just impossible to get the labels off of, some bottles like Founders, or cans like aslin, dont work well , usually bigger bottles work good though. Prairie works great. I recommend these magnet sheets,

https://www.amazon.com/Craftopia-Magnetic-Adhesive-Anything-Flexible/dp/B071L97W57/ref=sr_1_3?ie=UTF8&qid=1525196048&sr=8-3&keywords=magnet+sheets

and i use xacto knives and a craft mat like this one, https://www.amazon.com/Alvin-Professional-Self-Healing-Cutting-GBM1218/dp/B0015AOIYI/ref=sr_1_4?s=arts-crafts&ie=UTF8&qid=1525196109&sr=1-4&keywords=craft%2Bcutting%2Bmat&dpID=51gR%252BOrM3WL&preST=_SX300_QL70_&dpSrc=srch&th=1

so you dont cut through it to the table youre on etc, the key to making your cuts nice and clean is putting a good amount of pressure during your cut and cutting fairly slowly.

use a straight edge, use metal rulers, plan out the size of the label, peel it off the can or bottle and affix it adhesive side down on the adhesive side of the magnetic backing. then just square off your edges with cuts and bingo instant fridge magnet.


You can also do it with brewery stickers as well.

here ya go!

Take the glass out and use the sticker mirrors. You could also apply right over top if you want it done faster:

https://www.amazon.com/Flexible-Mirror-Sheets-Cuttable-Plastic/dp/B01BU99K6E/

I made my own magnet using this and this.

I haven't tried moleskin, but I love this stick on suede. It's not $2 but it's not $30 either if you have prime.

like this

going DIY is the way to go. I've heard this from the pros as well. There just isn't the selection of dance specific shoes. The pair I bought most recently was from ALDO There called Aauwen-R Dark Grey, then I just went on amazon and got some stick on suede. The only problem I have found so far with this was that I stuck them on and it immediately slid like a 1/4 inch. Which isn't much but that's 1/4 without suede on the outside edge. I think I just should have walked around to let them dry. I immediately went down to dance at a dance event. So probably user error.

Do you mean something like these? Because that seems like an awesome idea! https://www.amazon.com/Self-adhesive-Clear-Rubber-Feet-Bumpons/dp/B001JASGH4

You have some great tips too, thanks.

They're called Bumpons - Here is a pack of 100 for $7.75

what cutter did you get?

for vinyl, definitely use the oracal 651 vinyl. here is a shitload of it for $30, less than $0.50 per sheet. If you buy it at a craft store it is about $2 per sheet: https://www.amazon.com/Ultimate-651-Starter-Adhesive-Assortment/dp/B01NADR97B/ref=sr_1_4?s=arts-crafts&ie=UTF8&qid=1506439801&sr=1-4&keywords=oracal+651

for transfer tape, I haven't found anything better than this. Shit just works. It is 4" brite line transfer tape: http://shop.vendio.com/cncsigns/item/911402157/index.html

you can also use the cricut or silhouette transfer rolls that they have, but honestly it sucks compared to the tape.

You can buy the case (and another one) from Amazon for $35.

https://www.amazon.com/gp/product/B0168YNYNG/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

It doesn't have the symbol on the outside but it's basically the same. I then bought sticky felt to line the inside with so the cards didn't get damaged.

https://www.amazon.com/gp/product/B07BGSWSGV/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

And then just some plastic dividers from one of those home stores.

https://www.amazon.com/Amy-Home-Adjustable-Thickening-Stationary/dp/B07CVJ953Q

So it doesn't have the printed logo or the wooden insert but you can make functionally the same thing for less than the shipping cost of that one.

If you'd like to make TE-01's windows more opaque you could get some blue gel sheets. Just cut them to size and stick them to the inside of the windows.

https://www.amazon.com/Pack-Adhesive-Transparency-Plastic-Overlay/dp/B07MJCMQS8

They'll still be a bit transparent, just darker and more opaque.

You can buy thin sheets of magnet and cut it to whatever size or shape you want. Now as far as affixing the photos I would try a few things and see what works best.

Edit: found an Amazon link if you like that sort of thing. I get bored at work some one should benefit.

https://www.amazon.com/dp/B071L97W57/ref=cm_sw_r_cp_apa_i_RJ26Ab031R35N

Wrinkly silver foil stickers underneath the clear? Or something like this

The clear blue doesn't seem to be modified, at least from some of the photos I saw.

Here is my solution to this problem - puma shoes with DIY suede stickers from amazon.
front
back with suede sticker
suede sticker from amazon
Hope this helps!

I have no knowledge of which of these are "the good stuff" but this will give you an idea of what i mean.

http://www.magnetking.com/?gclid=CjwKEAiA9s_BBRCL3ZKWsfblgS8SJACbST7DezASoRf5KVFSLxe_qBKx3dxZC7z5JYvchDqVxMUJgxoC7-zw_wcB#regularmagnet

https://www.amazon.com/Flexible-Magnet-Adhesive-Length-rolled/dp/B005HY990G

https://www.amazon.com/Flexible-Magnets-30mil-Strong-Material/dp/B016OR9SCS/

https://www.amazon.com/Flexible-Magnetic-Sheet-White-Length/dp/B005HY9KDM

Why not just save yourself time and energy and change the design. That's what they did to make it work. I would make the legs from 4x4 (which is really 3.5 x 3.5) and the horizontals pieces from 2 x 4 (again, realy 2.5 x 3.5) Everything will match up and it will look just fine. Or just use 2x for all of it. That's the best part about seeing a design you like. Just make it work for the tools and materials you have at your disposal.
Also, another suggestion would be to add rubber tabs or felt tabs to the top of the wood for the glass to rest on. Otherwise, that glass could easily slide around. I'd go with something like this to keep the glass protected from the wood and in place: http://www.amazon.com/Self-adhesive-Clear-Rubber-Feet-Bumpons/dp/B001JASGH4

Here's an easy fix I've used on my HHKB that solved all my problems with it slipping around:

apply these rubber feet on the bottoms of your HHKB. You might be able to find cheaper ones at a hardware store.

I like this, or they have adhesive ones.https://www.amazon.com/Flexible-Mirror-Sheets-Cuttable-Plastic/dp/B01BU99K6E/ref=pd_sim_201_3?_encoding=UTF8&psc=1&refRID=7D9S28ZGY7YBZN1P0CPA

I'm using these round ones I ordered on Amazon: http://www.amazon.com/dp/B001JASGH4/

Just added one on each nut that holds the plates together.

It was actually quite simple. I bought this: https://www.amazon.com/gp/product/B01BU99K6E/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

​

And then I made a triangle and taped it inside the machine bottom to allow for it to stay off the drip tray. I then cut another piece and laid it on top of the triangle. I will take some pictures and another video today. I was able to clean it up a bit and make it more clean by taking off an additional layer of the protective plastic. :)

​

Overall, very pleased with the results. Now if I could just hit the cup :)

That's a good suggestion, thanks!
My bumper is probably not magnetic, but I'll put a couple on magnetic sheets so I can move them around my car just for the heck of it. Easy to remove so I can store it away if some jerk wants to steal them.


Here's one I'll get, which should be able to fit six bumper stickers. (non-affiliate link)
https://www.amazon.com/Master-Magnetics-Magnet-Magnetic-08505/dp/B005HY9KDM/

Great idea. Will really help those riding behind you understand why your not moving over. Thank you for being considerate to others!!!

As an idea to help you see behind you. You might be able to get a small flexible plastic mirror that you can attach to the brim of your helmet. If oriented the correct way, you should be able to make out if someone is behind you. In a catch, it is very unlikely to cause a secondary issue. Something like this: https://www.amazon.ca/Flexible-Mirror-Sheets-Cuttable-Plastic/dp/B01BU99K6E

Check this out at Amazon.com
Craftopia Magnetic Adhesive... https://www.amazon.com/dp/B076DFD3N5?ref=ppx_pop_mob_ap_share

These are awesome.

I also had trouble getting used to the plasticky palmrest on my T430s. So I bought some peel-and-stick suede and cut out some patches for my palmrest: It feels amazing.

The screen still latches on my T430s, but your T440 doesn't have a screen latch anyway. It doesn't look that weird having patches of suede on the palm rest, and the feel far outweighs cosmetic concerns for me. I'm not sure how it will fare as far as keeping it clean over time, we'll have to see. But the price was right for this experiment.

I put these rubber feet next to where the little plastic bumps on the bottom towards the back of the keyboard are: https://www.amazon.com/gp/aw/d/B001JASGH4/ref=mp_s_a_1_3?qid=1465585240&sr=8-3&pi=SX200_QL40&dpPl=1&dpID=21KThbUYKEL&ref=plSrch

Fixed it immediately. You can also put them over the screw holes, but I prefer to leave those open for easy access to the innards.

about 1mm.. it was this stuff: https://www.amazon.com/gp/product/B01KU7XVVC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 just some shit I had left over from something else lol

Yes I do! I have glittery butterfly wings, glitter makeup, and tiara ( I still need to find it), miniskirts, etc!

We can get together beforehand to get dressed up!

purchased this: https://www.amazon.com/gp/product/B00N7UKC8A

PM me for more details!

Hmm... this does look like the same backing material that is used on the replacement soles u/wanderedoff recommended on the post in r/shoemaking. Those soles do look to be suede.

The same company that sells the adhesive has whole suede sheets with the backing material already applied. This may be your best bet if you are looking to be able to cut to size instead of using the precut pieces.

The blue paua shell I was able to get off amazon at this is the listing. It's on the pricey side, but the sheet I ordered has lasted a couple projects now, and I've been happy with the results every time!

I used these: https://www.amazon.com/dp/B071L97W57/ref=cm_sw_r_tw_dp_U_x_wqQ6CbHTJMPA8

These are the ones I use. They are PERFECT. Just barely clear the base so it dont rock. Got the link from a past reddit thread.

No need I think I may have found it!

https://www.amazon.com/Shell-Coated-Enhanced-Adhesive-Veneer/dp/B00L6EKVTY/ref=sr_1_1?ie=UTF8&qid=1469025142&sr=8-1&keywords=abalone+veneer

Thanks for the tip!! Your application of it looks great and it's something I'd definitely like to try!

44¢

Ultimate Oracal 651 Starter Pack 63 Glossy Self Adhesive Vinyl Sheets (12" x 12", 63 Assortment) https://www.amazon.com/dp/B01NADR97B/ref=cm_sw_r_cp_apa_LvpdAbXGP35X7

Am I allowed to post that link?
Is that the right stuff?

Yes. You can also get them pre cut, but I prefer cutting myself for a better fit.

Edit: wrong link

Premium quality suede sheets 8.5"x12" with super-strong self-adhesive backing. Ideal for making peel-and-stick (self-stick, stick-on) soles for dance shoes, [SUEDE-DIY-black]. https://www.amazon.com/dp/B00CBJLNW2/ref=cm_sw_r_cp_apa_i_T43gDbXTCTK6P

Another thing i do is to have a magnetic plate for laying out screws in the general layout of the thing im taking apart.

https://www.amazon.com/Flexible-Adhesive-Magnetic-Sheets-Pictures/dp/B01E7V00W0?keywords=magnetic+paper&qid=1536230061&sr=8-4&ref=mp_s_a_1_4

Craftopia Magnetic Adhesive... https://www.amazon.com/dp/B076DFD3N5?ref=yo_pop_ma_swf

These are what I use. Sticks to the wall great.

I'm looking for adhesive silicone strips - basically continuous versions of these (https://www.amazon.com/Self-adhesive-Clear-Rubber-Feet-Bumpons/dp/B001JASGH4). Ideally corner orientated pieces too. 3~5mm width, anything wider would probaly look weird.

I need them as 'surround feet' for a box.

TIA for any pointers

I've tried a couple different suppliers. The highest quality ones come with adhesive backing and are found here:

Blue Paua Shell Flexible Enhanced Adhesive Veneer https://www.amazon.com/dp/B00MWU13BG/ref=cm_sw_r_cp_apa_WvKZBbCYEZB9A

The supplier is morning calm on amazon

i think i got these



helps if you have a an xacto knife too

I was thinking about using something like this (flexible mirror sheet). Super easy to work with, no sharp edges and you can roll it up into a tube if you wanted to.

Self-adhesive magnetic sheets - https://www.amazon.com/Craftopia-Magnetic-Adhesive-Anything-Flexible/dp/B071L97W57/ref=sr_1_4?keywords=self+adhesive+magnetic+sheets&qid=1570631945&sr=8-4

​

I use this stuff for many things. Not strong magnetism though. Depends on what you're after. For me weak magnetism is perfect.

I haven't! I did peek around on Amazon and it looks like there's some cheaper options there than in-store. Michael's looks like it's about $5 per sheet?

There's this [50-pack 4x4 square cork paper](50 Pack Self-Adhesive Cork Sheets Squares 4"x4" Cork Backing Cork for Tile Coasters and DIY Crafts Mini Wall Cork https://www.amazon.com/dp/B07PK19KZK/ref=cm_sw_r_cp_apa_i_By0LDbQBYNW8T) for $11 and this [36-pack 4x4 round cork paper](36 Pcs Self-Adhesive Cork Round for DIY Coasters, 4"x 4" Cork Circle, Cork Tiles, Cork Mat, Cork Sheets with Strong Adhesive-Backed by Blisstime https://www.amazon.com/dp/B07N372LGY/ref=cm_sw_r_cp_apa_i_FA0LDbT7VXMGD) for $9.

Awesome bag collection. I've been turning my bags into refrigerator magnets and covering the fridge. Looks pretty cool. Just get some of this: https://www.amazon.com/Craftopia-Magnetic-Adhesive-Anything-Flexible/dp/B071L97W57/ref=sr_1_2?ie=UTF8&qid=1520867044&sr=8-2&keywords=magnetic+sticky+sheets
and cut to whatever shape you want.

I get these, but there are better ones! Namely anything with 3M on them.

Thanks. That's too bad, it would be pretty cool if you could do custom orders, or even if you could request specific game pallets. Though now that I think about it, I bet this wouldn't even be too difficult of a DIY product, if you can get large blank magnet sheets. This looks like it would work. Just need to figure out how to best color them, and how to reproduce the colors I want accurately.

Here is one option for the magnet portion