(Part 2) Best automotive trim according to redditors

ILIVABLE Seatbelt Adjuster, Comfort Universal Auto Shoulder Neck Strap Positioner Clips, Vehicle Seat Belt Covers (2 Pack, Black) https://www.amazon.com/dp/B07GYD44D3/ref=cm_sw_r_cp_api_i_3tmBDb407C25T

There are other ones out there too, but this was just one of my first results from an Amazon search. I use one and really like it.

Here's a situation I was in as a damn customer.

​

Wife bought a car. She loved it on the test drive, we got a good price and bought from a store I'd gotten a car from. Everything was good, we took the car directly from the dealership to go run some errands. My wife starts commenting on how the seat belt is hurting her. We try moving the seat, we try her throwing a jacket on (which would only be tenable some of the time). Nothing is working. She's getting more and more uncomfortable driving the car. We've tried every seat position that still lets her physically drive the car and nothing is working. In my head I'm thinking "I'm going to have to go back to the Sales Manager and try to get him to unwind this deal over a fucking seat belt. All we can do is be honest with him and hope for the best."

​

In the end, I went to an auto parts store as soon as we got home and bought some shitty seat belt pads. I also ordered one of these beautiful bastards, which ultimately did the trick. Satisfaction and love for the car was restored and I didn't have to end up in a thread like this; until now.

I got the Cup Holder Hero center armrest tray. Happy with it so far. https://www.amazon.com/Console-Armrest-Organizer-Accessories-Crosstrek/dp/B07GK74QKW/ref=mp_s_a_1_5?ie=UTF8&qid=1542824954&sr=8-5&pi=AC_SX236_SY340_QL65&keywords=cup+holder+hero&dpPl=1&dpID=41IBbaP%2B59L&ref=plSrch

I really like the insert I got for my center console.
Got it on Amazon for $13

JDMCAR for Toyota Tacoma 2016 2017 2018, Center Console Organizer Insert ABS Black Materials Tray, Armrest Box Secondary Storage https://www.amazon.com/dp/B07C7WNDZG/ref=cm_sw_r_cp_api_l7PXBb8T8571M

https://www.amazon.com/3M-Scotchlite-3150A-Reflective-Conspicuity/dp/B015PFXB00

http://www.infraredcoatings.com/
https://www.empiretactical.org/infrared-reflective-patches/3m-solas-infrared-id-x2-set-extreme-adhesive

I drive a car and ride both a motorbike and bicycle. Turn your fucking strobe light off.

If visibility is a concern (as it should be) get two lights and mount them on opposite sides of your handlebars. Or get a helmet-mounted light. Or put reflective tape on your helmet and front forks. Don't fuck around with cheap reflective tape, the stuff you want is called SOLAS (Safety of Life at Sea). It's the shit that's mandated by the Coast Guard so that if a boat has lost power and is running dark, they can be found at night, in heavy rain, with a searchlight hundreds of yards away.

Having two lights allows depth perception to kick in, so other people on the road can estimate your speed / direction better. A lot of 4 wheel vs 2 wheel crashes aren't caused by lack of visibility, but from the 4 wheeler seeing the 2 wheeler and misjudging their speed and thinking they can make that turn without affecting the 2 wheeler.

mount points for the OEM tonneau cover. if you want a tie-down there the front bed rail is a better choice.

http://www.amazon.com/gp/product/B0033YECEK/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687762&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B0002KR9Q6&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0AQ8J4JG4CMHRXY95V16

I like the dmm from taco garage. It’s sleek and not crazy expensive plus it puts my phone in the perfect spot.

Also this organizer for the center console. . Totally worth the $20 or so dollar for the insert and the dividers.

• bullshit. OP does NOT know 4 women with severed breasts.
  
   
  
  
• If that was true, the seatbelts definitely saved those women's lives.
  
   
  
  
• Devices like these are less than ten bucks and prevent the "painful" slight rubbing of seatbelts she's talking about.
  

You can buy a factory rail off Amazon for like $50. It's the same rail as 2nd gens.

Genuine Toyota Accessories PT278-35100-BH Truck Bed Header Rail https://www.amazon.com/dp/B00DWVN9CK/ref=cm_sw_r_cp_api_32Q4yb9AMMJZ3

Get one of these. Ingnore that amazon says they dont fit CVPIs. I have one in mine and have been absolutely thrilled with it.

Use 3m double sided body mold tape.
https://www.amazon.com/3M-03616-Scotch-Mount-Molding-Tape/dp/B0026HOTZ2

I believe [removed] means the mods removed it, not the user

Here's the post from google cache by /u/xtraveler192

>
> I've installed a bunch of accessories and thought I'd write up some quick notes. No reason for long reviews on most of these products.
>
> ​
>
> Wireless Charging Pad: https://www.amazon.com/gp/product/B07Q9L6DJN/
>
> -- Fits in nicely, but doesn't seem to support fast charging despite contact with the seller. (Yes, I've connected it to a QC 3.0 Adapter for fast charging)
>
> -- Might return it and just go wired charging with a QC 3.0 Power Bank.
>
> -- Still undecided
>
> ​
>
> Front/ Rear Seat Floor Mats: https://www.amazon.com/gp/product/B0792RW471/
>
> Picture: https://imgur.com/a/wr6sC87
>
> -- I first thought they looked cheap, but once installed the lines are so clean it fits seamlessly
>
> -- The hexagon shape is great for catching dirt, verus having it slide around the mat before it hits the edges
>
> -- Highly recommend
>
> ​
>
> Center Console/ Cup Holder Liner: https://www.amazon.com/gp/product/B07FN6X5QS/
>
> -- Fits really nicely, easy to remove and clean, keeps everything from sliding around
>
> -- Highly recommend for a basic liner, splash of color
>
> ​
>
> Trunk/Frunk Liner: https://www.amazon.com/gp/product/B07KZJMV5V/
>
> Pic: https://imgur.com/a/ZHTkrSn
>
> -- Clean lines, easy install, but doesn't fully cover every inch of the trunk space
>
> -- Tougher to get to lower compartment with items in trunk, but a small inconvenience
>
> -- Recommend for the price
>
> ​
>
> Door Open Stickers: https://www.amazon.com/gp/product/B07MXYBPYH/
>
> Pic: https://imgur.com/a/cpn0QB7
>
> -- Day 1 & 2 showing people the car they all pulled emergency handle before I could catch them
>
> -- Since installing this no issues, and most people think it's a factory decal
>
> -- Highly recommend
>
> ​
>
> USB for DashCam/ Sentry Mode: https://www.amazon.com/gp/product/B07D7PDLXC/
>
> -- Everything has been great so far, plenty of storage
>
> -- I followed this instruction and had no issues at all: https://teslatap.com/articles/usb-flash-drives-for-tesla-dashcam/
>
> -- I formatted using GUIFormat (link in article) and it was quick and easy
>
> -- Recommended
>
> ​
>
> Key Card Holder: https://www.amazon.com/gp/product/B07QPKW4Y9/
>
> Pic: https://imgur.com/a/0uCNAtc
>
> -- I don't like Tesla's phone connection, since I can't get text messages or any notifications, so I use my card often
>
> -- Placing this on top of the console wrap (see below), seems pretty seemless and prevents my card from sliding around
>
> -- Recommend for those that use the card often, or might use valet
>
> ​
>
> White Carbon Fiber Center Console Wrap: https://www.amazon.com/gp/product/B07MHYLGD7/
>
> Pic: https://imgur.com/a/8KGLycF
>
> -- This is awesome, take your time with install, the videos on evwraps.com are prefect and very clear
>
> -- The one mistake I made noone notices, so I don't point out (cup holder piece is the hardest to install FYI)
>
> -- BUY THIS NOW!!! (Especially if you have the white interior, I think it's the best accessory I have
>
> ​
>
> Screen Protector: https://www.amazon.com/gp/product/B07GKGDC5M/
>
> -- Easy install, it basically suctioned itself to the screen after placing 1 corner
>
> -- My fingers slide easily on the screen, and cleaning it is a breeze
>
> -- Highly recommend, can't beat the price
>
> ​
>
> Center Console Organizer: https://www.amazon.com/gp/product/B07M8NRLV8/
>
> Pic: https://imgur.com/a/kC8CTCx
>
> -- Great organizer, great price, easy to pop in and out
>
> -- Make sure you put the organizer in, and then lower the phone holder, reverse order to take it out
>
> -- Highly recommended
>
> ​
>
> Dash Phone Holder: https://www.amazon.com/gp/product/B07RVB24W1/
>
> -- I bought this to wireless charge and use Waze (normally key for my commute)
>
> -- It didn't fit well on the dash, and the cable run was going to get in the way of the clean interior lines
>
> -- Not recommended
>
> ​
>
> I'll answer questions that come up.
>
> (I wish I had set up an Amazon Associate Account to get a cut of these products, lol)
>

If you’re short, like me, you may need one of the kid clips that lower the height of the seat belt. I’m driving a Miata right now, so it’s less of an issue, but in the Jeep, we had to get a clip so the seatbelt went across my shoulder instead of my neck - along the lines of this - Safety Belt Comfort | Seat Belt Adjuster https://www.amazon.com/dp/B07B4GYQKM/ref=cm_sw_r_cp_api_i_s6f2CbVEJE8A7

Congrats, your car is gorgeous!!! I'm sure Telsa branded are amazing as well, but I too ordered mats on Amazon, and they are fantastic.

Mats: https://www.amazon.com/gp/product/B07MHTLHDL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Liners: https://www.amazon.com/gp/product/B07FN6X5QS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Console wrap (the piano black is nice, but I can't stand finger prints): https://www.amazon.com/gp/product/B07CZL8ZR5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I also ordered weather strip from RPM Tesla, I do not recommend them.

Get a Euro switch, allows you more options for running lights and headlights and is superior. Easy to install, too.

I have one of these and I love it, combined with blindspot mirrors on your outside rear views, it makes for a much safer driving experience. And looks neat.

And yeah, vinyl wrapping the brushed aluminum.

I also have this one (in black) and I really like it. Fits well, armrest is comfortable, and it holds lots of stuff.

https://www.amazon.com/gp/product/B000V9FWSA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Alternatively, you can get something like this. For me, it covers my blindspots perfectly:

http://www.amazon.com/Broadway-BW849-Type-A-Convex-Mirror/dp/B0040E1HJA/ref=sr_1_3?ie=UTF8&qid=1397021065&sr=8-3&keywords=broadway+mirror+convex

https://www.amazon.com/Motorcycle-Reflective-Scotchlite-ME-RK-99/dp/B00CEKUO1O

3M auto tape has a double back adhesive and is pretty resilient to most operating temperatures. Best to apply on a clean surface during a warm day or blow dry it in place.

Ah well there you go! I would think even if you had the legal colors it would make you more of a target for cops though. I personally like the stealth route since uh, yeah I am probably always speeding a bit.

If you want increase visibility, they make reflective tape that you can add to the back of your helmet, jacket, bike, etc.. Comes in black so if you have a black helmet it just blends in. I noticed that once I added a few big pieces to the back/sides of my helmet cars hung way further back from me at night.

Edit: this is the stuff I have:

https://www.amazon.com/Motorcycle-Reflective-Scotchlite-ME-RK-99/dp/B00CEKUO1O

OP linked this one https://www.amazon.com/dp/B07M8NRLV8/ref=cm_sw_r_sms_apa_i_YrSHDbMDY7CNY%5BClean but mine is actually from a different brand. Same thing tho

> I often put the seat belt under my arm because I'm short AF and it digs into my neck.

Do you know that most modern cars have adjustments to lower the seat belt height? No snark, I'm genuinely asking.

Examples 1, 2, 3. Once properly adjusted even kids can wear a seatbelt comfortably.

Alternatively, try something like this.

RAMPAGE PRODUCTS 31515 Denim Black Deluxe Locking Center Console for 1976-1983 Jeep CJ5 https://www.amazon.com/dp/B000V9FWSA/ref=cm_sw_r_cp_api_i_Ig-iDb16FAKKV
Squeezes in between the seats of my 2011 crown vic. No install needed.

Remove the old trim by using fishing line to separate the tape from the body. After, I would recommend using a 3m stripe off wheel like this -

http://www.youtube.com/watch?v=HHKN5_UfDik

to remove all the old glue from the car and the trim, then re-stick it on with 3m double sided trim tape - like this.

http://www.amazon.com/3M-03616-Scotch-Mount-Molding-Tape/dp/B0026HOTZ2/ref=sr_1_3?s=automotive&ie=UTF8&qid=1346365814&sr=1-3&keywords=3m+molding+tape

Use a level/long ruler to make sure your trim is level with the old trim on the rest of the car. Level it to the other trim piece, not the ground, your car might be lower in the front for example.

I used these.

https://www.amazon.com/gp/product/B00CEKUO1O/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

My BIL is super good at drawing/tracing stuff and he loved the idea. I bribed him to do it and he spent the morning cutting, test-fitting, and applying them.

Maybe this? https://www.amazon.com/Safety-Belt-Comfort-Positioner-Universal/dp/B07B4GYQKM

If they're adhesive pinstripes, this thing will take the old stripe off in no time at all, and you could either get pinstripe tape, or take it to someone to run the lines with paint, shouldn't be too spendy. I'd talk to a painter if they're painted on, though.

Would something like this help at all? I too am short and hate having the seatbelt in my neck.

I just got the same exact set today. I preferred the center cup holder mats that came in my Limited so I didn't use those two pieces. Did you use the two double stick pieces they provided? I used them for the back seat console because they would move around when you put the console up.

I also got this center console organizer from the same company and the orange matches. It's perfect! :

https://www.amazon.com/gp/product/B07GK74QKW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I have speakers that are not quite that big, but still large, taped to my toolbox at work. I use the 3M Automotive Tape since we have tons of it on hand. It's double-sided foam tape and it's super sticky. Also how I had my license plate mounted to my car for a while there.

They've held up so far, and I'm sure in a climate controlled bedroom, the tape would last much longer. I wouldn't worry about them falling off, unless you had massive home theater speakers on there...

I just use this for my change in the center console. Works great for me.

There are so many types, here are some:

http://www.amazon.com/No-Mortise-Bed-Rail-Fittings-Set/dp/B003F0DZZ4/ref=pd_sim_hi_1?ie=UTF8&refRID=1S7FT7E3DJJ5132V1ZKZ

http://www.amazon.com/Surface-Mount-Rail-Brackets-Complete/dp/B001DT3SLU/ref=pd_sim_hi_4?ie=UTF8&refRID=1S7FT7E3DJJ5132V1ZKZ

http://www.amazon.com/Locking-Safety-Rail-Brackets-Full/dp/B001DSZWN8/ref=pd_sim_hi_8?ie=UTF8&refRID=1S7FT7E3DJJ5132V1ZKZ

http://www.amazon.com/Galvanized-Steel-Bed-Rail-Fasteners/dp/B001DSZGCU/ref=pd_sim_hi_9?ie=UTF8&refRID=1S7FT7E3DJJ5132V1ZKZ

http://www.rockler.com/heavy-duty-wrought-steel-bed-rail-fasteners-4-pack-select-size

http://www.rockler.com/locking-safety-bed-rail-brackets

http://www.rockler.com/surface-mounted-keyhole-bed-rail-brackets

http://www.rockler.com/5-surface-mounted-bed-rail-brackets

http://www.rockler.com/surface-mount-bed-rail-brackets

Just browse the related items or use those keywords to run a Google search.

Also, I'm plugging /r/woodworking

Your truck doesnt have any rails at all or just missing the head rail? I just ordered this head rail.

Thanks!

I don't know of a tool that will gauge structural integrity. My guess is it depends on a variety of things including the type of wood, quality of the wood, and the joint. My response to my fear of the bed falling apart was over engineering it. But the bed rail fasteners (http://www.amazon.com/Galvanized-Steel-Bed-Rail-Fasteners/dp/B001DSZGCU?ie=UTF8&keywords=bed%20rail%20fasteners&qid=1465488171&ref_=sr_1_1&sr=8-1) are where the strength of the corner joints come from.

In general, the weight will be distributed across places in the bed, so just think about designing stronger joints where they might be more stress (corners, middle support, etc.). I was afraid the first few nights that we'd wake up to the bed falling in on top of us... but not a single creak yet.

Someone else may be more helpful here if they know of some tool.

I don't remember if it's a 360mm or a 400mm, but it's a convex Broadway mirror that I bought from Super Autobacs a few years ago. I found a vendor on Amazon for ya!

my suggestion would be to do the door swap, then buy a self-install remote unlock off ebay and wire it up without a PI =)

edit: in fact, the kits that include the actuators are really cheap. ( https://www.amazon.com/Biltek-CX-402-Conversion-Universal-actuators/dp/B0033YECEK )

Broadway BW849 360mm Type-A Convex Mirror https://www.amazon.com/dp/B0040E1HJA/ref=cm_sw_r_cp_api_i_vc3sDb1ATQQAJ I have this in my FJ and my race car. Works well.

Auto pinstriping tape works the best you should be able to find it at any hardware or auto parts store.

Not sure if you're still interested or not, but I ended up going with this product as a clip-on mirror attachment and couldn't be happier!

Broadway BW845 270mm Type-A Convex Mirror

Just recently fixed 2 of the same problems on my 99. Could be similar fixes or you might have a bad wire somewhere.

I replaced the driver side window switch panel with this to fix the random passenger window not working problem. Easy swap, probably want to get some door panel trim clips too since they like to break when pulling the door panel.
https://www.amazon.com/gp/product/B004DK4P5O/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Also had the whrrr sound from the rear passenger door lock and the power lock usually not work. Replaced the latch/actuator assembly in the door and it solved that problem. Probably best to find that from ebay or a junkyard.

Hair dryer and dental floss to get the old stuff off. Heat up the tape and use the floss to get under it. Then just pull slowly and it will all come off. Use standard soap and water to clean it and then use the same 3M tape they put it on with originally. They make an adhesion promoter you can use as well, but attention to detail when cleaning the area will suffice.

Link

The soldering contacts eventually let go, it's fairly common. You can re-solder or just pick up a new one.

https://www.amazon.com/Cherokee-1997-2001-Window-Master-Control/dp/B004DK4P5O/

OP I'm telling you buy that switch for the drivers side it will 100% fix the problem I just did it after having the same problem. Only $30...

https://www.amazon.com/gp/aw/d/B004DK4P5O/ref=mp_s_a_1_1?ie=UTF8&qid=1467515824&sr=8-1&pi=SY200_QL40&keywords=jeep+xj+switch+panel&dpPl=1&dpID=31olo5oY2XL&ref=plSrch

Looks great! If you wanted to get super technical, you could buy this https://www.amazon.com/Trimbrite-T1114-Pinstripe-Tape-Black/dp/B00029XAYW and cover the line between the blue and yellow. It would make the line perfect, and be just like the original. Good work though, I've tried my hand at painting a few helmets with mixed results.

Maybe use bed rail fasteners for the leg stretchers? https://www.amazon.com/Galvanized-Steel-Bed-Rail-Fasteners/dp/B001DSZGCU

Also these are awesome. They clip over your normal rear view mirror and allow you to see a far bigger angle, minimizing or eliminating blind spots.

here's the link for the tray: https://www.amazon.com/Console-Armrest-Organizer-Accessories-Crosstrek/dp/B07GK74QKW/ref=pd_lpo_sbs_263_t_0?_encoding=UTF8&psc=1&refRID=5RPZX5JJ3D9W2SNQ130Q

Tray
https://www.amazon.com/dp/B07M8NRLV8/ref=cm_sw_r_sms_apa_i_YrSHDbMDY7CNY[Clean View](https://i.imgur.com/IXt3hiH.jpg)


USB plug
https://www.amazon.com/dp/B01NAMU8KY/ref=cm_sw_r_sms_apa_i_qpSHDbYC2SQ0C

I don't have many blind spots in my MKIV, but I have one of these: https://www.amazon.com/dp/B0040DVL6U/ref=cm_sw_r_awd_lPWLub0Z9V10E

I hardly ever have to turn my head back.

Hinges to make my trunk open fully automatically, on unlock. 10 min install.

Cup holder inserts

waterless wash kit

Tesla-recommended wipes for the seats

Tesla Floor Mats

PPF on front and rockers

Tint

USB stick for dashcam

Trunk liner

Abstract Ocean “T E S L A” Performance Emblem (to replace rear T logo

Tempered Glass Screen Protector for display

Tesla High Power Wall Connector

I have a problem.

Oh, and I installed a Rampage center console based on other Redditors' advice.

https://www.amazon.com/Rampage-31515-Locking-Center-Console/dp/B000V9FWSA

I used 3M Automotive double sided tape.

Hmm interesting concept. I could probably achieve something similar via different means.

For me I used hockey tape (nice matte black fabric like tape) and taped my Razer Firefly wire to itself, and ran it and my mouse cable (with some slack for movement) under my keyboard, then taped all 3 together and ran it to the back of my desk under my sound bar so it "looks" like only a single large cable going to the back of the desk.

Underneath I have a surge protector and a usb hub stuck with double-sided 3M automotive adhesive (I use this stuff for everything). and then these in expensive adhesive J-channel cable race for wires.

I also got rid of my center support leg in exchange for a heavy duty shelf bracket.

https://imgur.com/a/XZpd7f2

https://www.amazon.com/3M-03615-Scotch-Mount-Molding-Tape/dp/B000BO9L00/ref=sr_1_2?crid=2K2C6TAK8T4QQ&keywords=3m+automotive+double+sided+tape&qid=1568764442&sprefix=3m+auto%2Caps%2C157&sr=8-2

https://www.amazon.com/Channel-Cable-Raceway-Black-Length/dp/B002DNM42O/ref=sr_1_2?keywords=j+channel+wire&qid=1568764412&sr=8-2

or if you have boobs. seatbelts dig into your neck if you have boobs.
get one of these or something similar. (the other kind i use isn't currently available)

source: have boobs

Like this stuff? 1/8 inch?

So I was looking into this too, and found this kit on Amazon for 30 bucks. It says it adds remote lock/unlock functionality to all 4 doors. This would not include remote ignition, but that's not a huge priority for me.

I have no idea how this works, so if anyone has installed something like this please let us know what you think.

Jeep Cherokee 1997-2001 Window Master Control Switch https://www.amazon.com/dp/B004DK4P5O/ref=cm_sw_r_cp_apa_bLkRzb328G72V

You can try this device:

https://www.amazon.com/Cellet-PH600-Holder-Adjustable-Samsung/dp/B006BIQBMQ

as for rear view mirror I personally use this (Before anyone starts talking down for a JDM product in an american car I own a 2016 9th gen Malibu myself and a former Import owner (Honda/Kia of 10 years):

https://www.amazon.com/Broadway-BW845-270mm-Convex-Mirror/dp/B0040DVL6U/ref=sr_1_4?keywords=broadway+mirror+270mm&qid=1563900718&s=gateway&sr=8-4

I personally own the extended version of that cup holder but the slimmer version is probably more suitable. The aftermarket mirror will show the whole rear window along with the rear passengers. Initially things seems a bit smaller but after a while (10 years for me) the mind gets used to it.

Like all things. Practice makes perfect.

Happy Driving.

Thanks! I'm planning to do a post on it when I finally have the bar positions and cable routing figured out.

Agree about visibility - have you ever seen this stuff? It's incredibly bright with even relatively dim light sources. I'm planning to put a strip of it around my rims.

This mirror is excellent, and it takes 30 seconds to install. Unless there's some crazy feature you actually want out of that OEM mirror, the Broadview will be better.

Just make sure you measure the distance between your visors and pick a length that will fit between them, otherwise you won't be able to lower the visors.

Something like this? https://www.amazon.com/Seatbelt-Adjusting-Clips-Eliminates-Strain/dp/B004YD1VIY