(Part 2) Best cat 6 ethernet cables according to redditors
We found 733 Reddit comments discussing the best cat 6 ethernet cables. We ranked the 337 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
In my experience, WiFi extenders are garbage and have massive speed degradation. I have a similar issue with my house, where only one side has effective coverage.
What I did was run an Ethernet cable from the “out” port on my router through the ceiling and attic to the “internet” port on a secondary router on he other side of the house.
You could do the same by digging a shallow trench through the yard and running an Ethernet cable through joined pvc pipes. [Here] (https://www.amazon.com/200FT-Networking-Ethernet-Patch-Router/dp/B01GTKF8FG/ref=sr_1_3?crid=75Z0GO89GHQZ&keywords=200+ethernet+cable&qid=1567095010&s=gateway&sprefix=200’+ethernet%2Caps%2C234&sr=8-3) is a 200’ cable for $17.50. PVC pipes are also cheap, so we’re really not talking about a lot of money, or an incredible amount of skill required. The most expensive portion would be for a second router, but the connectivity can’t be beat.
Ethernet cables (Cat 5/5e/6/6a) can be run up to 100 meters (328 feet) without needing a switch or repeater, per their specification. You can sometimes buy pre-made cables in long lengths, anything longer than 100 feet usually requires you to make your own, or order a custom cable.
Edit: That said, looks like you can get a 200-foot Cat6 cable on Amazon for under $20.
Black also available for less than a dollar more if that works better for your arrangement.
https://www.amazon.com/dp/B06XXH72SZ/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B06XXH72SZ&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=21517efd-b385-405b-a405-9a37af61b5b4&pd_rd_wg=Cd8E7&pf_rd_r=GD3VX0CSAKZQVKXFV6J5&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=klnPi&pf_rd_i=desktop-dp-sims&pd_rd_r=25c7b7a0-f26e-11e8-bed5-7dcfcd74da26
They're literally called "Powerline Adapters" usually made by TPLink.
Fair warning: Regardless of their speed rating, they depend ENTIRELY on the wiring of your house. Bad wiring/ not well insulated = slow speed
Good wiring = potentially better speed.
Someone turns the microwave on, and it's on the same circuit as your powerline adapters (could get packet loss).
It's an inelegant "solution" to bad-wifi and only be used as such.
Honestly it's so worth it just to spring for a 100 Ft. CAT6 ethernet cable. heck they even come in such small sizes like this "snagless" one: https://www.amazon.com/Ethernet-Higher-Bandwidth-Internet-Network/dp/B017R12KF2/ref=pd_nav_hcs_bia_t_1?_encoding=UTF8&psc=1&refRID=11ZW0WW8G6A3QTJJJG9N
Saw this on Slickdeals, hopefully it helps you all as much as it does me! While your at it, change your amazon smile to the EFF to help fight for net neutrality!
25' Cat 6 Ethernet Cable (White)
$4.58 w/ promo code RR99ROJL
https://smile.amazon.com/Cat-Ethernet-Cable-White-Connectors/dp/B018BCJKE0/
50' Cat 6 Ethernet Cable (White)
$6.09 w/ promo code CQTGWYYH
https://smile.amazon.com/Cat-Ethernet-Cable-White-Connectors/dp/B00WD017GQ/
100' Cat 6 Ethernet Cable (White)
$10.48 w/ promo code TWEGP5DO
https://smile.amazon.com/Flat-Ethernet-Cable-White-Clips/dp/B00WD017BG/
50' Cat 6 Ethernet Cable (Black)
$6.09 w/ promo code H2CHE27H
https://smile.amazon.com/Cat-Ethernet-Cable-Black-Connectors/dp/B00WD017FW/
6-Pack 1' Cat 6 Ethernet Cable (White)
$5.96 w/ promo code BW7VDF6M
https://smile.amazon.com/dp/B01IQWGI0O
6-Pack 1' Cat 6 Ethernet Cable (Black)
$5.96 w/ promo code MDJ5FGIM
https://smile.amazon.com/dp/B01IQWGKQ6
***
3-Pack 6' Cat 6 Ethernet Cable (White)
$6.34 w/ promo code 89QBRPS2
https://smile.amazon.com/dp/B01IQWGRPU
This is the line pull I used: https://www.amazon.com/gp/product/B0026TA6WK
along with this cable lubricant: https://www.amazon.com/gp/product/B000WTN3I0
Absolutely run the cables before committing the concrete. Also seal the PVC conduit joins with PVC cement, otherwise they will eventually become waterlogged. If you haven't already purchased the Cat6, I recommend shielded outdoor-rated direct-burial cable, like this.
I also suggest running some low-voltage cables along with the Cat6, so you can power external IR illuminators like these, which are way better than the IR LEDs in the cameras, and also avoid insects, fog, and dust from triggering motion alerts at night.
Good luck!
It's here
Can you put an Ethernet switch near your gear so you only have to run one Ethernet cable along the wall? Also, you can get some pretty flat
Ethernet cable, might be easier to hide.
https://www.amazon.com/dp/B018BCJKE0/ref=cm_sw_r_sms_awdb_t1_W9TZCb1032GT6
Although i liked my provided eero network cables i ended up using these which worked out wonderfully.
Cat 6 Ethernet Cable White 3 ft ( 6 Pack ) - Flat Internet Network Cable - Jadaol Cat6 Ethernet Patch Cable Short - Cat6 Computer Lan Cable With Snagless RJ45 Connectors - 3 feet White ( 6 Pack ) https://www.amazon.com/dp/B01IQWGRPU/ref=cm_sw_r_other_apa_Re0fAb879WQVT
Dont remeber if i bought them at Amazon or monoprice. I found that eero' s ethernet cables were a bit stiff for some applications.
Thanks for explaining. 1000ft of cat5e, a bag of connectors (and covers) plus the crimping tool and tester
Here are the links for exactly what I bought.
SolidLink CAT5e 1000ft Premium... https://www.amazon.com/dp/B019POIH2E?ref=ppx_pop_mob_ap_share
UbiGear Cable Tester +Crimp... https://www.amazon.com/dp/B008UY5WL0?ref=ppx_pop_mob_ap_share
Three Pack of Your Cable Store 15... https://www.amazon.com/dp/B01LYLGWSY?ref=ppx_pop_mob_ap_share
I have found Amazon to be cheaper than monoprice for cables (I don't buy in bulk though, just one cable at a time). I bought this ethernet cable for $7.80 10 months ago (it's $10 now) and if you buy $25 worth of stuff you can get free shipping (if you don't have Amazon prime). Where monoprice would charge me after shipping $22 for a similar 100ft cable.
RJ-45 to Punch down?
Also someone pointed out something I missed. The premade wire you have is stranded. That's really hard to terminate to the point that it isn't recommended. You should stick to the keystone couplers where you need a female port.
If you looks for different cable, Cat 6a, Solid Copper (opposed to stranded), and Pure Copper (opposed to Copper Clad Aluminum or CCA)
I suggest just buying a long cable (you can get a 100' CAT 6 cable from Amazon for $10) and comparing the network diagnostics on the box directly.
You could even download something on wireless, delete it, then re-download over wired.
Given the environmental factors like interference and composition of your wall, no one can give you a 100% accurate answer. Test it yourself.
You can get a smaller box than the usual thousand feet if it's a problem of cost as well as having left-over cable - I found a 250' of solid-core Cat.6 on Amazon for $50, which might be about the right amount for just the three cameras you need to cable at <100' each?
Cameras are almost certainly also just fine with 5e if that's cheaper, I know that at least half our security cameras at work (some of which are probably 50+ metre / 150" foot runs) are older installs using it and have no trouble with PoE at those distances.
Yes those are monoprice slim CAT6 cables
https://www.amazon.com/gp/product/B01BGV2C7U/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
They do make patch panels that does exactly that. Not sure if it would be recommended over plugging directly into the switch, will let someone else advise for or against that but just knew I have seen then in my many searches
Tripp Lite 24-Port Cat6 / Cat5 Patch Panel, RJ45 Ethernet 1U Rackmount TAA (N254-024) https://www.amazon.com/dp/B000HZI348/ref=cm_sw_r_cp_apa_i_0nj1CbRZ281RK
> 3-Pack 6' Cat 6 Ethernet Cable (White) $6.34 w/ promo code 89QBRPS2 https://smile.amazon.com/dp/B01IQWGRPU
This one is actually a 6-Pack of 3'
Yeah sure. I've done some thorough research recently. Prices jump up and down daily though. I'll try to keep the options under $120 with rebates and whatnot.
Was $109, wait on restock - https://www.amazon.com/dp/B00IKDFL4O/?tag=dislag-20
If you really want 1 ms and 10 ms of input lag - http://www.bestbuy.com/site/asus-21-5-led-hd-monitor-black/5386140.p?skuId=5386140
https://www.amazon.com/dp/B018MYT3YO/?tag=dislag-20
Best monitor for $130 possible - https://www.amazon.com/dp/B00ANKMNXO/?tag=dislag-20
https://www.amazon.com/ASUS-VS247H-P-23-6-1920x1080-Monitor/dp/B005BZNDS0/ref=sr_1_43?s=pc&amp;rps=1&amp;ie=UTF8&amp;qid=1500304420&amp;sr=1-43&amp;keywords=monitors&amp;refinements=p_n_size_browse-bin%3A3547805011%7C3547806011%2Cp_36%3A1253506011%2Cp_n_condition-type%3A2224371011%2Cp_85%3A2470955011
Was $100 yesterday - https://www.amazon.com/dp/B008DWITHI/?tag=dislag-20
I'd recommend wired btw.
https://www.amazon.com/gp/product/B017R12IXG/ref=od_aui_detailpages00?ie=UTF8&amp;psc=1
Something like this?
https://www.amazon.com/gp/product/B01F4XBTH0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&amp;psc=1
i ordered this and am very happy!
i only get 45 mbps coz its what i pay for.
also you can fit two nicely in the clips.
If you're already here asking the right questions I'm confident you can get through it.
I was expecting to have to spend a couple of hours getting the AP working the way I wanted, but the whole thing literally took five minutes. It was literally, make a user account and password, assign a vlan, click next a couple of times and that was it. There would be a little more to it if you're setting up a firewall and a switch as well, but it's pretty much as easy as it can be.
You will need something to run the Ubiquiti web interface on. They sell something called a cloud key for this, but you could also use a Raspberry Pi3, since they're cheaper and do the same thing. You could also run the Ubiquiti controller software on any Linux system that you have laying around.
As for the wiring itself, what I did was get a small wall-mounted rack, like this one. Then I ran the cables to a Cat 6 patch panel, like this. From the patch panel, I ran connections to my rackmount router and switches. I've basically only ever followed the bundle of snakes cabling model in the past, so it's satisfying to have everything nice and professional looking.
I used Cable Matters stuff for wall plates and keystone jacks, etc. You'll also need a spool of CAT6 Ethernet cable, and a punchdown tool. I have a 4-way wall plate near my workstation and another 2-way near my printers.
If you do run your own connections you will want to get a cable tester. I did create one bad punchdown and this tester found it no problem. There are lots of other testers out there and I'm sure nearly all would do the job.
Good luck!
Yes and no. Yes, brand and thickness matter. Generic cables are often poorly made causing them to fail quickly especially if they're moved at all. Smaller conductors and less shielding mean more interference and loss across distance.
Having said that, for 25ft there's effectively no difference between Cat5e and Cat6a / 7 / whatever. The cable you linked will work fine. This one will also work fine. I have personally used the thin Monoprice cables at shorter lengths and had no issues. The only thing I'd say is they are not as nearly robust, so if it's going somewhere it might be kicked, stepped on, tripped over etc make sure you protect it.
Get a decent crimping tool and a cheap tester to make sure your pairs are matching up on both sides. I do this for work and home and will never go back to buying Ethernet cables at specific lengths.
https://www.amazon.com/TRENDnet-RJ-45-RJ-12-RJ-11-TC-CT68/dp/B0000AZK4G/ref=pd_lpo_vtph_147_tr_t_2?_encoding=UTF8&amp;psc=1&amp;refRID=0DZ16D14CWPHKTYK159J
https://www.amazon.com/HDE-Network-Cable-Tester-Phone/dp/B009ZXYI1U/ref=lp_7701919011_1_7?s=industrial&amp;ie=UTF8&amp;qid=1524075376&amp;sr=1-7
Also, if you plan on running multiple cables, I suggest using different color boots so your cable can all be the same color (since you're buying it in bulk) but the boots are different colors to help note which cable goes where.
https://www.amazon.com/Accessbuy-Ethernet-Network-Strain-Connector/dp/B01LYLGWSY/ref=pd_bxgy_469_img_3?_encoding=UTF8&amp;pd_rd_i=B01LYLGWSY&amp;pd_rd_r=MMCFM6WPJ3Y2Y3H7M3WA&amp;pd_rd_w=3qix5&amp;pd_rd_wg=S3Y6R&amp;psc=1&amp;refRID=MMCFM6WPJ3Y2Y3H7M3WA
https://www.amazon.com/TRENDnet-RJ-45-RJ-12-RJ-11-TC-CT68/dp/B0000AZK4G/ref=pd_lpo_vtph_147_tr_t_2?_encoding=UTF8&amp;psc=1&amp;refRID=0DZ16D14CWPHKTYK159J
Good to know.
Amazon.ca pricing can be a bit weird. I think Cat6 is my best bet though.
[Cat 6] (https://www.amazon.ca/Ethernet-Higher-Bandwidth-Internet-Network/dp/B017R12IXG/ref=sr_1_6?keywords=cat5e+25ft&amp;qid=1556283926&amp;s=electronics&amp;sr=1-6) is $9.95, a [Cat 7] (https://www.amazon.ca/Shielded-Ethernet-Cable-Highest-Cables/dp/B07B4D94FT/ref=pd_sbs_147_3/141-7518677-1184245?_encoding=UTF8&amp;pd_rd_i=B07B4D94FT&amp;pd_rd_r=44f92220-6824-11e9-af2b-df456cd2a423&amp;pd_rd_w=JjdRL&amp;pd_rd_wg=z4mFZ&amp;pf_rd_p=5dcda75b-8643-4da3-9bb1-5c0233790500&amp;pf_rd_r=662ZMCQDNKMK0YD47PFX&amp;psc=1&amp;refRID=662ZMCQDNKMK0YD47PFX) is $12.95, and a [Cat 5E] (https://www.amazon.ca/Monoprice-Cat5e-Ethernet-Patch-Cable/dp/B00ACR5ZVK/ref=sr_1_5?keywords=cat5e+25ft&amp;qid=1556283926&amp;s=electronics&amp;sr=1-5) is $12.00 All are 25 FT.
An Ethernet crimper, cable and pack of ends is not expensive and can make projects look a lot neater. Get the feed-through ends if your eyes aren't great as they make it a lot easier to get the wires in the right slots.
&#x200B;
Another option are the new thin Ethernet cables, I have these in 1, 3, 7 and 10 foot lengths and they seem to be working fine.
https://smile.amazon.com/gp/product/B01BGV2C7U/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
OK NEVERMIND
I FIGURED IT OUT
I BOUGHT CAT6 HEADS BY ACCIDENT https://www.amazon.com/gp/product/B01K9Z4C3G/
Get some Cat6 heads, they'll work perfectly with the monoprice cables. My bad man!
Make your own Ethernet Cable then.
Buy transparent/see through CAT6 ends. https://www.amazon.com/CableCreation-Connector-Ethernet-Connectors-Transparent/dp/B01K9Z4C3G
Then buy some pvc coated 23AWG Copper Wire. Cut it into 8 pieces. Then twist half of them into the other half. Two by two. You should be left with 4 pieces of twisted wire. Then hook them into the CAT6 ends. You can even wrap the twisted double strands of Copper Wire in Tinfoil to make it EM & RF shielded.
Thanks yeah im in the process of buying this ethernet cable from amazon. Yes its a long ethernet cable because my fiber optic otn box which my modem is connected to is at the other side of the house and we cant really move it elsewhere.
I did test out my speeds with an ethernet cable I borrowed from a friend and it reaches to my advertised speeds, but for me Im mostly on wifi with my phone and laptop. Its ok if Idont reach the advertised speed with wifi but Im just looking for a way to at least push my speeds a little higher if possible?
Not sure if adding these links is allowed but I looked on amazon and couldn't really find good infrastructure wiring. Could I buy these three things, cut the end off the cable, feed it through, put another connector on and crimp it?
Connector: https://www.amazon.com/CableCreation-100-PACK-Connector-Connectors-Transparent/dp/B01K9Z4C3G/ref=sr_1_3?keywords=ethernet%2Bcat6%2Bconnector&qid=1554753267&s=gateway&sr=8-3&th=1#customerReviews
Crimper: https://www.amazon.com/TRENDnet-RJ-45-RJ-12-RJ-11-TC-CT68/dp/B0000AZK4G/ref=sr_1_8?crid=1UGT8TER83M2A&keywords=ethernet+cat6+crimper&qid=1554753078&s=gateway&sprefix=ethernet+cat6+cr%2Caps%2C132&sr=8-8
Ethernet: https://www.amazon.com/KabelDirekt-Ethernet-Connector-High-Speed-Corrosion-Resistant/dp/B016A910N0/ref=sr_1_14?keywords=ethernet%2Bcat6%2B50ft&qid=1554752929&s=gateway&sr=8-14&th=1
You'll probably see terminology like CAT5, CAT5e, CAT6, maybe even CAT7. Those don't matter to you. Colors don't matter either. Just get the right length, and the cheapest one you can find is good.
Edit: like for example, I would just get this one if I need 25ft: https://www.amazon.com/Cable-Matters-Snagless-Ethernet-Black/dp/B007NZGPAY/ref=sr_1_7?keywords=network+cable+25ft&qid=1571625240&sr=8-7
What about this Monoprice Cat6 Bulk Bare Copper Ethernet Cable, UTP, Solid, Riser Rated (CMR), 23AWG?
Yes, there are some rather significant differences between CAT5 and CAT7, but effectively, the higher the number, the faster/better/newer the cable is, so I would get the highest one you can afford, in order to "future proof" the setup, in case you upgrade other things in the future that may be able to make use of the higher speed CAT cable.
Look for an outdoor-rated CAT cable. Something like this: https://www.amazon.com/Outdoor-Shielded-Waterproof-Ethernet-trueCABLE/dp/B01JAVN1C8 (though likely not QUITE so long haha)
Also make sure you get proper cable clips that won't squash or otherwise damage the cables, as even a tiny pinch can theoretically damage the tiny copper cables inside, thereby rendering the whole thing useless. Things like these tend to work very well: https://www.alliedelec.com/product/hellermanntyton/211-60003/70400243/
Note: I am in no way recommending those specific products, merely showing you what kinds of things are out there for what you're trying to do.
same modem just connected with Ethernet instead of WiFi
Get a flat cable with cable clips, this one is 75ft and $16. The holes are small and won't be noticed when you move.
https://www.amazon.com/dp/B01F4XBTH0/ref=cm_sw_r_cp_apa_i_BtRdBb1SKRVRM
I got this from Amazon. But I tried a random Cat6 cable that I had laying around and had similar results.
This is what I ran: https://www.amazon.com/gp/aw/d/B019OM4VOA/ref=ya_aw_od_pi?ie=UTF8&amp;psc=1
There are decent cables that are very flexible and minimally visible. I use some of this stuff to wire my upstairs office. A small switch there connects the two PCs.
https://smile.amazon.com/gp/product/B01F4XBTH0/
Here is what I did - https://www.reddit.com/r/homelab/comments/bcihk1/am_i_doing_this_right_pt2/
&#x200B;
https://smile.amazon.com/gp/product/B076H6LGLS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 - low voltage 3 gang bracket
https://smile.amazon.com/gp/product/B0045LNHJQ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 - 3 gang cover (cheaper at HomeDepot)
https://smile.amazon.com/gp/product/B000U3I3LA/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 - 6 port keystone faceplate (order 3 of these)
https://smile.amazon.com/gp/product/B01JJ46JX4/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 - f/f keystone rj45 ports
https://smile.amazon.com/gp/product/B018NQ37F2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 - keystone blanks
&#x200B;
Any questions just ask!
https://www.amazon.com/dp/B000HZI348
https://www.amazon.com/dp/B0745WYJ6N/ref=sspa_dk_detail_1?psc=1
https://www.amazon.com/Monoprice-SlimRun-Cat6A-Ethernet-Patch/dp/B01BGV2C7U/ref=mp_s_a_1_1_sspa?keywords=cat6a+patch+cable&amp;qid=1563018174&amp;s=gateway&amp;sprefix=cat6a+&amp;sr=8-1-spons&amp;psc=1#aw-udpv3-customer-reviews_feature_div
I’m talking about some of the amazon reviews. Obviously have to take them with a grain of salt but it’s enough to make me avoid them for now.
You have a 100FT cat5 cable which is significantly slower than a cat6 cable. You won't find a wireless card to give you what you want especially from 2 floors below. Many things can interfere with Wi-Fi. If you really are set on going to Wi-Fi you need to get a better router first. Which for the speeds you want is going to cost over $100 if not over $200. But you're still going to get interference and the ping is still gonna be around 100Ms. Your best bet is to get a cat6 cable and some cable covers. Basically what you're asking for isn't possible without spending a significant amount of money. Even if you did shell out the $500 you're still probably going to get some interference.
I didn't quite understand what you're trying to say,
Is what you're saying that basically even though I am connecting Ethernet with my extender it is still similar to a wireless connection as my PC isn't directly connected to the router?
Well what can I possibly do then? Would you recommend I buy a very long Ethernet cable that will run through my living to my room & will connect to my PC & Router. Like this
You already have good answers for the power question. As for the short mic cable, I ordered one of these to extend my cable. The 3 ft was good enough for me, but longer ones are available.
Could always pull yourself, if you aren't comfortable with terminating they sell pre-made patch cables in as long as you can use. If you aren't comfortable going up in ceilings a simple wall conduit wouldn't look bad with only a couple runs.
Case in point, here's a 200 footer for $17
https://www.amazon.com/200FT-Networking-Ethernet-Patch-Router/dp/B01GTKF8FG
http://www.amazon.com/HDE-Ethernet-Adapter-Nintendo-Wii-Port/dp/B003XWD1G2/ref=sr_1_1?s=videogames&amp;ie=UTF8&amp;qid=1397853439&amp;sr=1-1&amp;keywords=wii+ethernet+adapter
http://www.amazon.com/Cmple-Ethernet-Cable-CAT6-30-48/dp/B000QZ0036/ref=sr_1_2?s=electronics&amp;ie=UTF8&amp;qid=1397853515&amp;sr=1-2&amp;keywords=cat6+cable
boom fast internet.
Plug them all into a Pass through patch panel. Label it one for one with the labels on the cables. Should be pretty enough and functional. Then use patch cables and a nice 2u cable manager. Be nice of you to put some j-hooks on those shit studs about 2ft up and separated the cables from the power that its probably running on top of.
Heres a parts list.
Patch Panel
2u Cable Manager
J-Hooks
Patch Cables
Wall Rack Enclosure
"My question is, is there a way to take that one Ethernet connection that is going straight to the PC and put it into a splitter or something that allows me to have multiple Ethernet ports so I could hook up one to the desktop"
You can get a Switch. Yes like the person below stated. Think of it this way, if you want more then ONE computer to that area, why not have this person run 4 lines and then get a 4 Gang Wall Plate to the end of it.
So :
MODEM in room to >>>> Switch 4 port >>>> CABLE LINES RUN TO ROOM TO >>>>> $ Gang Wall Plate and 4 rj45 ends.
Also use for Cat 6 cable.
Best of both worlds, since most ISP router modems have like 4 ports in the back for multiple connections. Also if you hire this CABLE LAYER, tell him you will buy the cable (like the one above) and save yourself a surcharge. U bet you'd pay 150$ a box or more if they come in with it.
any disadvantage to a flat cat 6? what do you think of this?
I just bought some of this:
https://www.amazon.com/Dripstone-Solid-1000ft-Network-Ethernet/dp/B00QJGG4IG/ref=sr_1_5?ie=UTF8&amp;qid=1493238541&amp;sr=8-5&amp;keywords=cat6+cable
I've also used this in the past:
https://www.monoprice.com/product?c_id=102&amp;cp_id=10234&amp;cs_id=1023402&amp;p_id=2270&amp;seq=1&amp;format=2
If you're paying $ per foor, then you're vastly overpaying.
You don't need to go any higher than Cat 5E for gigabit ethernet. Likely Cat 5 would do. That said, there shouldn't be that much price difference.
Here is 25 feet for $7.99, working out at 32c per foot. You could likely get cheaper.
Go wired.
Maximm Cat6 Outdoor Ethernet Cable (150ft – Black) Zero Lag Pure Copper 550Mhz, Waterproof Ethernet Cable Suitable for Direct Burial Installations. https://www.amazon.com/dp/B0745WYJ6N/ref=cm_sw_r_cp_apa_i_Mz2CCbXTKZTH1
If you want the best speed, run a Network cable directly from your PC to your router:
https://www.amazon.com/Cable-Matters-Snagless-Ethernet-Black/dp/B007NZGPAY/
I noticed your router only support 802.11N (WiFi 4). When you get a new router, make sure it supports at least 802.11AC (WiFi 5).
As far as your current wifi adapter problems go, make sure you have current drivers, also make sure they match the hardware version of your adapater (V3, V4, V5, or V6).
https://www.tp-link.com/us/support/download/tl-wn821n/#Driver
If you decide to not get the network cable, or you want to stay wireless, here would be a good upgrade for your wireless adapter:
https://www.amazon.com/ASUS-USB-AC68-Dual-Band-Adapter-Included/dp/B01I7QFR10/
I was planning to route the cables down the gaps in the side of the rack, but I have fewer cables than you. One thing you could look into is monoprice slim run ethernet cables. They are about half the wideth (or 1/4 the volume) of normal ethernet cables. Might make it take up less space in your rack.
Cat 6 Ethernet Cable 25 ft White:https://www.amazon.com/Cat-Ethernet-Cable-White-Flat/dp/B018BCJKE0/ref=sr_1_9?s=pc&ie=UTF8&qid=1541157832&sr=1-9&keywords=ethernet+cable [amazon.com]$4.50 w / promo code: R6MC97FH
Cat 6 Ethernet Cable 50 ft White:https://www.amazon.com/Cat-Ethernet-Cable-White-Connectors/dp/B00WD017GQ/ref=sr_1_6?s=pc&ie=UTF8&qid=1541157832&sr=1-6&keywords=ethernet+cable [amazon.com]$5.70 w / promo code: TNCGPIWU
Cat 6 Ethernet Cable 100 ft White:https://www.amazon.com/Ethernet-Internet-Network-Computer-Connectors/dp/B00WD017BG/ref=sr_1_11?s=pc&ie=UTF8&qid=1541157832&sr=1-11&keywords=ethernet+cable [amazon.com]$10.50 w / promo code: QVQVA2LO
Cat 6 Ethernet Cable 10 ft Black-5pack:https://www.amazon.com/Cat-Ethernet-Cable-Connectors-10Ft-10pack-White/dp/B01N5QNPMH/ref=sr_1_23?s=pc&ie=UTF8&qid=1541158560&sr=1-23&keywords=ethernet%2Bcable%2B10%2Bft&th=1 [amazon.com]$10.50 w / promo code: 2UO8XUI7
Cat 6 Ethernet Cable 10 ft White-5pack:https://www.amazon.com/Cat-Ethernet-Cable-Connectors-10Ft-10pack-White/dp/B01MR7B3EF/ref=sr_1_23?s=pc&ie=UTF8&qid=1541158560&sr=1-23&keywords=ethernet%2Bcable%2B10%2Bft&th=1 [amazon.com]$10.50 w / promo code: 8QD63NCW
&#x200B;
Taken from Slickdeals
Yes, it's possible. You'll need something like this: https://www.amazon.com/Maximm-Outdoor-Ethernet-Cable-150ft/dp/B0745WYJ6N
It needs to be direct burial or outdoor rated cable. You could get away with using a normal ethernet cable for a while, but the elements will eventually break down the plastics/vinyl and make the cable brittle.
Keep in mind, that typically ISP's do not allow sharing of an internet connection with neighbors. It's difficult to enforce this, so most instances go unnoticed. But a warning; Don't tell your ISP about it.
Wrapping up my shopping list, is this cable appropriate for my needs?
https://www.amazon.com/Monoprice-Copper-Ethernet-Cable-114768/dp/B019OM4VOA/ref=sr_1_1?ie=UTF8&amp;qid=1498835828&amp;sr=8-1&amp;keywords=250ft+cat6
And a simple patch panel to keep things tidy?
https://www.amazon.com/Cable-Matters-12-Port-Vertical-Bracket/dp/B00UVQI8B6/ref=sr_1_1?ie=UTF8&amp;qid=1498835951&amp;sr=8-1&amp;keywords=mini%2Bpatch%2Bpanel&amp;th=1
DO NOT BUY PATCH CABLES FOR KEYSTONE STYLE CONNECTions!
Keystones are meant for solid core cable only. It is considered “structured cabling” since it’s installed and not moved ideally, ie in a wall behind a faceplate.
Try this , it’s 250ft but you will have extra!
Monoprice Cat6 Ethernet Bulk Cable - Network Internet Cord - Solid, 500Mhz, UTP, CMR, Riser Rated, Pure Bare Copper Wire, 23AWG, 250ft, Blue https://www.amazon.com/dp/B016YS8FZS/ref=cm_sw_r_cp_api_i_-0ORDbNRX938N
I have no experience with some of these specific items but I wouldn't hesitate to buy them from what I've seen:
The cable:
https://www.amazon.com/Outdoor-Shielded-Waterproof-Ethernet-trueCABLE/dp/B01JAVN1C8/
The "ends" -- these are keystone jacks. You could put RJ45 plugs on, but I think keystone jacks are more forgiving, plus it's more flexible since you can plug a patch cable into this. Also, putting RJ45 ends on this direct bury cable will be tricky since it will have thicker shielding.
https://www.amazon.com/10-Pack-Cat6-Keystone-Jack-Compatible/dp/B07JRD69V6
The punchdown tool -- you could get by with a cheaper/simpler one like this -- you'll probably want this for stripping the jacket (it does both), though a razor blade will work too:
https://www.amazon.com/Mini-Wire-Stripper-Rj45-Cat5-Cable/dp/B07MQB7STL/
This is kind of a basic middle of the road example of a proper punchdown tool, though the previous one is fine for a small amount of work.
https://www.amazon.com/TRENDnet-Storage-Interchangeable-Reversible-TC-PDT/dp/B0000AZK4D/
Once punched down, you can plug those keystone jacks into wall plates like these:
https://www.amazon.com/Cable-Matters-10-Pack-Profile-Keystone/dp/B074HGPH18
Or surface mount boxes:
https://www.amazon.com/Monoprice-2-Port-Surface-Mount-107089/dp/B0069MDB9U/
You could even find a small patch panel.
Passthrough (feedthrough) patch panel.
https://www.amazon.com/Tripp-Lite-Rackmount-Feedthrough-N254-024/dp/B000HZI348
If you need any decent number of them, and/or will need more in the future.... Buy a spool like this, some ends, a crimper and make them yourself.
if you need a new cable, order the flat cat6 ones by Jadaol:
https://www.amazon.com/Cat-Ethernet-Cable-White-Connectors/dp/B018BCJKE0/ref=pd_lpo_vtph_147_lp_tr_t_2/138-0243435-0431555?_encoding=UTF8&amp;psc=1&amp;refRID=K91A2V4P89XQVHPSAC55
they are the best.
> i bought a 25 foot ethernet cable from best buy
Go onto Amazon and get one. When it gets there, take that one back to Best Buy and then go get something to eat with the money you just saved.
Really Inexpensive One
Really Nice One
Lots of other options that won't rape your wallet
Both are probably cheaper than what you paid for that 25 footer from BB. They make a TON off of things like cables, chargers, etc. Those Monster Gold super bad ass "PRO" HDMI cables for $100+ are a complete joke. They're no better than $10 HDMI cables from Amazon.
Source: Ex-Best Buy tech.
100ft of cat6?
https://www.amazon.ca/Ethernet-Higher-Bandwidth-Internet-Network/dp/B017R12KF2
You just need a long ethernet cable running from your Genexis Tundra Titanium to the ethernet port on your computer. Quake Live over WiFi isn't recommended.
http://www.amazon.com/Cmple-Ethernet-Cable-CAT6-30-48/dp/B000QZ0036
https://www.amazon.com/Accessbuy-Ethernet-Network-Strain-Connector/dp/B01LYLGWSY/
Something like Ethernet Cable Extension might a bit more pricy but isn't too clunky, relatively secure and just look ugly.