(Part 2) Best automotive lighting conversion kits according to redditors
We found 295 Reddit comments discussing the best automotive lighting conversion kits. We ranked the 133 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
I did very basic upgrades. To start, I just upgraded the headlights to LED’s, of course it makes it look better and lights up the road more. I bought these on Amazon for about $50 (LASFIT 9012 HIR2 7600LM LED... https://www.amazon.com/dp/B07BRQTP8V?ref=ppx_pop_mob_ap_share)
Then I did a mod so the day running lights (DRL’s) will be on when the headlights are on. Basically it keeps the DRL’s on at night too. And during the day I just turn on the headlights cause they look cool. I followed this video here by Just Vlad, (https://youtu.be/9_fFrB4KOYk). Using a 1N5408 Rectifier Diode on eBay.
Then I changed the grill to black by simply using carbon fiber vinyl on most of the trim pieces throughout the car, and the inside as well. I’m sure anything will work, but this is what I have used and has lasted for several months in hot, cold and storms. Just an ebay item, (https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F131708477112) I chose 10ft by 5ft and chose 3d. It looked best for the paint on my car. The higher “d’s” makes it more reflective.
And lastly I upgraded those orange turn signal lights to LED switch backs (the most painful part of the upgrade.) Following videos on YouTube and forums gave me the best results. This is the first video I saw that made me want to upgrade, (https://m.youtube.com/watch?v=7fMm7ZCmxek). I used these LEDs with nothing but replacing the bulbs was done, there is no hyperflash btw. (http://syneticusa.com/Shop/index.php/led-lights/switchback-dual-color/7443-super-bright-switchback-33-led-build-in-load-resistor-version3.html)
And thats pretty much it.
So it is actually a 3 part ordeal.
The actual fog lights since my car didn't come with them, and the stalk. Then I did some c-shaped drl since I have leds in my high beams and the factory drl doesn't work with leds, but then the c-shaped drl didn't work for a little bit so I bought the drl turn signals, and then the previous c-shaped ones started working again. I will just post all of my mods below:
Fog lamps with brackets : https://www.amazon.com/dp/B01FL8DPWU?ref=ppx_pop_mob_ap_share
Light stalk : https://www.amazon.com/dp/B00AWO7XOK?ref=ppx_pop_mob_ap_share
C-shaped DRL : https://www.amazon.com/dp/B014P7LPEI?ref=ppx_pop_mob_ap_share
Sequential LED Turn signals with DRL : https://s.click.aliexpress.com/e/5veD22k
9005 LED High Beam : https://www.amazon.com/dp/B075J9S4DT?ref=ppx_pop_mob_ap_share
H11 55W HID Low Beam : https://www.amazon.com/dp/B07CMKT2F4?ref=ppx_pop_mob_ap_share
7440 7443 LED Brake/Tail Light : https://www.amazon.com/dp/B07GTKLF32?ref=ppx_pop_mob_ap_share
7440 LED Turn Signal (rear) : https://www.amazon.com/dp/B07Q8RZRZV?ref=ppx_pop_mob_ap_share
194 LED License plate/used as side markers in the front/a couple other places : https://www.amazon.com/dp/B07BT23WVC?ref=ppx_pop_mob_ap_share
194 LED side marker bulbs (not used but the correct ones if you want yellow, I liked the white and it was what I had when the originals burnt out but didn't ever change them from the above link) : https://www.amazon.com/dp/B01KY7GCXW?ref=ppx_pop_mob_ap_share
License plate smoke : https://www.amazon.com/dp/B007LICQ9M?ref=ppx_pop_mob_ap_share
Grille : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F254096211721
K&N 33-2480 Air Filter : https://www.amazon.com/dp/B00CR9WVPE/ref=cm_sw_r_cp_api_i_VfS6CbNBD59AQ
I had my rims done by a local company, they are the factory 16" painted gloss black. My mazda emblem is actually a long story, but essentially it is just scuffed up with sand paper ready to be painted but I liked the look and stuck it back on the way it is. I have also installed car play, and 3D printed a shift knob. The factory bose system was a little lacking and put a small under seat sub in to help fill the sound, but am still not happy with it, so that's a future project.
Some near future plans for the car include the aero kit, and I'll post the links to those here too:
Front Bumper Lip Air Dam : https://www.amazon.com/dp/B01FTUE8EY/ref=cm_sw_r_cp_api_i_bdS6Cb2X8Y22M
Black Mirror caps : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283050942561
Side skirts : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F391544070112
And the rear diffuser : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F113007041503
I installed these high-beam babies on mine:
9005/HB3 LED Headlight Bulbs High Beam Conversion Kit, Marsauto M2 Series Super Bright Headlamp with Fan, CANbus-Ready IP67 CSP Chips 10000LM 6000K Xenon White 2-Pack https://www.amazon.com/dp/B07GNCMNCH/ref=cm_sw_r_cp_api_i_aO8hDbJ0A965Q
You bet. Not sure of the OEM Projector Housing part #, but they are GM. Bought them used on FB Marketplace. Brand new with only 3k miles on them. $300 total.
Low Beam/Daytime Running Lamps (bulb): H11/H8/H9 LED Headlight Bulbs Low... https://www.amazon.com/dp/B07HCZ7RZ6?ref=ppx_pop_mob_ap_share
High Beam bulbs: HIKARI LED Headlight Bulbs... https://www.amazon.com/dp/B07GKC818Q?ref=ppx_pop_mob_ap_share
DO NOT WORK. Turn Signal bulbs: iBrightstar Newest 9-30V Super... https://www.amazon.com/dp/B06XK4PL33?ref=ppx_pop_mob_ap_share
Side marker light bulbs: 194 LED Bulb 3030 Chipset T10 194... https://www.amazon.com/dp/B07L8CVPCX?ref=ppx_pop_mob_ap_share
EDIT: THE SIGNAL LIGHT LEDS DO NOT WORK!
Aukee 9005 LED Headlight Bulbs,... https://www.amazon.com/dp/B07FXP4KRS?ref=ppx_pop_mob_ap_share
Aukee H11 LED Headlight Bulbs,... https://www.amazon.com/dp/B07GWF2JXZ?ref=ppx_pop_mob_ap_share
Alla Lighting 5202 LED Fog Light... https://www.amazon.com/dp/B07H6TMSXF?ref=ppx_pop_mob_ap_share
30inch CREE Curved LED Light Bar... https://www.amazon.com/dp/B07QMS27BN?ref=ppx_pop_mob_ap_share
No flickering or flashing. All lights were plug and play.
I used the ones linked below. I think they are ok not great. No canceller or resisters needed. They display a proper beam pattern (if properly installed) and won't dazzle drivers in other cars. I love the whiteness and clarity of LED, but honestly these aren't much brighter than stock halogens. What I'm saying is you can do better but these are pretty cheap.
Cougar Motor H11 Led headlight bulb, 9600Lm 6500K (H8 H9) Fanless All-in-One Conversion Kit - 3D Bionic Technology https://www.amazon.com/dp/B07HNKRM56
EDIT: I have 3 pairs of these in mine, low beam high beam and fog.
Low Beam
High Beam
I upgraded to Sealight bulbs from Amazon and I got a big improvement on my 2001. I don't have before/after pictures, but I feel much more comfortable driving at night now.
LED low beams
I got these for the ambers. Still kickin since 2017. Can't say the same for the tag light or interiors tho.. Avoid big packs of cheap LEDs, they're just waiting to flicker.
Low Beam I'm quite happy with these although they don't really fit inside. You'll need something like this and optionally a pair of these to seal it up, but a lot of ppl don't.
I replaced my stock bulbs with these LEDs SEALIGHT 9007 HB5 led headlight bulbs Hi/Lo Beam,Smallest Size,Super Bright 12xCSP Chips Conversion Kit Dual beam Bulb 6000LM 6000K White(Pack of 2) https://www.amazon.com/dp/B07GT5G6V7/ref=cm_sw_r_cp_taa_KyNwCb1QNKARJ
They are super bright and easy to replace.
Not wanting to deal with drilling holes and splicing cables I purchased some h11 led bulbs and replaced my exisiting fog lights, they aren't nearly as good as a led bar would be, but they are far better than just using the stock headlight/fog light combo my fist came with.
The exact model I purchased are these:
https://www.amazon.com/gp/aw/d/B07C1LTQ92?psc=1&ref=ppx_pop_mob_b_asin_image
I have these and I find them fine with no glare issues
I want to mimic the OEM ford color temperature, that’s why I went so blue
I cant speak for this led headlight below so I would double check reviews. But assuming you have an regular bulb installed currently, this would be a much better option. Led offers much brighter lumen levels and are low power/heat output.
I swapped to Led for my 2018 Boom bd50qt-9a 50cc scooter and I'm able to safely drive at night in the country side and city now that I can see.
Also check the output to the headlight so you can match it to the new one. You dont want a DC headlight if you scooter outputs AC power to the headlight, or vise versa.
https://www.amazon.com/DZG-Motorcycle-Headlight-Conversion-Warranty-1/dp/B07BTTFN1S/ref=mp_s_a_1_4?keywords=hs1+bulb&qid=1572981494&sprefix=hs1&sr=8-4
Yes both the h7 and h4 bulbs are LED
Links
H4: DZG H4 Motorcycle LED Headlight... https://www.amazon.com/dp/B07BTTFN1S?ref=ppx_pop_mob_ap_share
H7: H7 LED Fog Light Bulb Newest... https://www.amazon.com/dp/B07FPS35LN?ref=ppx_pop_mob_ap_share
Have had them for about a year and they work great! Easy install too. https://www.amazon.com/dp/B079KCGWLM?ref=ppx_pop_mob_ap_share
I went with the Hikari Ultra LEDs from Amazon. Has a fan built into the back of the bulb so it’s too long to fit the stock bulb cover over it—I’m currently modifying mine so they fit for my 2015. They are super bright and the beam pattern, since we have projector lenses, retain the sharp cutoff line.
https://www.amazon.com/dp/B077B5NXPY?ref=ppx_pop_mob_ap_share
Do you live in a city or rural area? If city, I would only upgrade fogs and highbeams, leave the low beams halogen. Philips makes the best halogen bulbs.
LED bulbs don't play as nice with headlights compared to halogen or hid bulbs. They tend to have a less focused beam, resulting in more glare, and equal or less beam distance.
The 2014 Civic has 9005 high beam, 9006 low beam, and h11 fogs.
You can upgrade your highbeam to led, and get that new white led drl, along with a brighter, more floody highbeam.
I have this bulb in my 2006 Civic high beams, and love it. It has a fan, but it's only noticeable when you're stopped, and the radio isn't playing. Plus, it's only on with the high beams. About 2x brighter than stock highbeams, and a little more distance.:
https://www.amazon.com/dp/B01KHUYQ34/ref=cm_sw_r_cp_awdb_2RibAbBDNMV56
For fog lights, he's a kit off Amazon. I'd recommend yellow fog light lenses, as the lower color tempature helps with rainy roads. Reflects better off wet surfaces. Also looks cool. You will have to do some diy wiring with this kit though. An independent shop should be able to install the kit within a few hours.
https://www.amazon.com/gp/aw/d/B01015EF9U/ref=mp_s_a_1_1?ie=UTF8&qid=1510247318&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=2014%2Bcivic%2Bfog%2Blight%2Bkit&dpPl=1&dpID=51fJLrEIC4L&ref=plSrch&th=1&psc=1
For led bulbs, I have these in my car also. Not super bright, but definitely a little brighter compared to halogens. No fan to fail, and are more reliable than halogen bulbs.
https://www.amazon.com/gp/aw/d/B074GX852M/ref=mp_s_a_1_5?ie=UTF8&qid=1510247478&sr=8-5&pi=AC_SX236_SY340_FMwebp_QL65&keywords=h11+led&dpPl=1&dpID=51zNCZD1E%2BL&ref=plSrch
And finally, just get these for low beams. Brighter, slightly whiter, and a bit more beam distance:
https://www.amazon.com/dp/B00U1OLM1Q/ref=cm_sw_r_cp_awdb_b1ibAbA2RJ29F
What do you think between these three options:
LASFIT
Aukee
Hikari
These will fit. I just installed them and they fit within the weather cap:
9005 HB3 LED
https://www.amazon.com/dp/B07HCZ4VCH/ref=cm_sw_r_cp_apa_sr36BbQPNBNTB
For sure
Here's what I've had since May, and they work great and I'm happy with:
Amazon link
I tried these first, and thought it was an overall regression on the stock halogens: Amazon link
edit: If it didn't link automatically, 9005/HB3 is your guy
This style vs the ones that have 3 sided bulbs.
https://www.amazon.com/gp/aw/d/B07GT5G6V7?psc=1&ref=ppx_pop_mob_b_asin_title
9005/HB3 LED Headlight Bulbs High Beam Conversion Kit, Marsauto M2 Series Super Bright Headlamp with Fan, CANbus-Ready IP67 CSP Chips 6000K Xenon Whit https://www.amazon.com/dp/B07GNCMNCH/ref=cm_sw_r_cp_apap_QFBnMTSFap48H
Low beams
High beams
Fog lights
Here is the link to some images:
https://imgur.com/a/NPEsWKB
I bought this LED light from amazon:
HIKARI LED Headlight Bulbs... https://www.amazon.com/dp/B07GKRKN5B?ref=ppx_pop_mob_ap_share
LED headlight bracket
LED Headlights
Auxillary Light LED
Integrated Tail Light
Bar End Mirrors
Radiator Guard
Rear Swingarm Spools
Mirror Mount Block off
Frame Sliders
This company sells a larger set of spools & sliders that is great!
CS Escapamentos Exhaust
Wind Screen
Levers
Block off plate substitute this is for when you get a full exhaust, youtube "block off plates z900" for more info
The prices all vary and there's PLENTY of options elsewhere. I just happened to get these over time. I also bought an engine guard/cage on Amazon but never could get it to fit properly.
here you go
Sampino H11/H8/H9 LED Headlight Bulbs Headlights All-in-One Conversion Kit 2Packs (DOT Approved) Low Beam/Fog Light Bulb 8000LM 5500K 12xCSP Chips Cool White https://www.amazon.com/dp/B07DLT4Y59/ref=cm_sw_r_cp_apa_lTIXBb9TNCDT3
It's not SUPER bright but it's a great improvement over stock halogen. I compared them my mothers 2012 Acura MDX, and there are very close in brightness
Amazon link
I'm pretty satisfied with these. Make sure you select the correct size. Also, note that LED / HID lights are more reflective on wet roads (in the rain) and feel less effective even though they're much better otherwise, in my experience.
Precisely these: BEAMTECH H11 LED Headlight Bulbs, 6500K 8000 Lumens Extremely Super Bright H8 H9 COB LED Chips Conversion Kit,Xenon White https://www.amazon.com/dp/B073ZDQ8BK/ref=cm_sw_r_cp_api_blF.BbVG6FPJF
The biggest difference between the bulbs I purchased and the ones you linked are the fans/lack of fans. The ones you linked don’t have fans, but the bulbs I purchased do have fans, so whenever my lights turn on, they make a quiet whirring noise. It doesn’t really bother me though. The ricer in me found it kinda cool when I turned them on for the first time lol.
Since the bike already has two connectors, couldn’t I just use this bulb with one of the connectors on the bike and leave the other one alone? That way I can switch between hi and low beam and not do any cutting. Or will this method not work?
led bulb
H4/9003 LED Motorcycle Headlight bulbs- SEALIGHT Hi/Lo Beam Replacement Conversion Kit Headlamp Single Bulb 6000LM 12V HID White 6000K https://www.amazon.com/dp/B07C6B94TF/ref=cm_sw_r_cp_apa_i_ybCDCbANJ5XTR
Worth the change over! I did a headlight restore kit and then added these. The vision is so much better at night. I don't know how I had even seen before. Only downside is that people think they are your high beams. I tried switching the high beams but the ones I got never worked. It's a clear white light now so even without the high beams, these are awesome. They have a mininfan built in so when the lights run, the fans run.
https://www.amazon.com/dp/B07BRQTP8V/ref=cm_sw_r_cp_api_hDY9BbVWASKSR
I’m on mobile so I’m not sure if this is going to work.
I just replaced my bulbs with these. No new housing.
The brightness is MUCH better. Compared to these, the stock was like holding a bic lighter in a dark room.
It has been 4 months and going strong so far.
Not quite cheap, but I put these on my bike and they are phenomenal. Used them almost every day for close to a year and they are still flawless. I wasnt going for cheap, I was going for best I could find.
I bought a pair of these and these for both low and high beams and have not had one issue with my backup camera.
For my 2015 EX I used these;
https://www.amazon.com/Auxbeam-Headlight-Headlights-Conversion-8000lm/dp/B074GZ3S4P/ref=pd_sbs_263_t_1/137-5469318-8879802?
They are very bright, white not blue, and install easily. Better still, no moving parts, unlike most LED headlights which have a heatsink fan.
Auxbeam LED Headlight Bulbs NF-S1 Series LED Headlights with 2 Pcs of H4 9003 HB2 P43T PHILIPS CSP LED Headlight Conversion Kit 50W 8000lm 6500K Hi-Lo Beam - 1 Year Warranty https://www.amazon.com/dp/B074GZ3S4P/ref=cm_sw_r_cp_apa_i_nl13AbMWZN4S7
They have more expensive options, but I went with these. Just plug in and go!
Hey I have a 15 as well I added these LED’ to mine and they look awesome
Auxbeam H11 LED Headlight Bulb NF-S1 Series LED Headlights with 2 Pcs of High Brig... https://www.amazon.com/dp/B074GX852M/ref=cm_sw_r_sms_c_api_i_PoMVCbE025ZFB
I also added the fog light LED’s as well
are you talking about plug and play leds like these?
https://www.amazon.com/dp/B01H6NZ7D8/ref=sspa_dk_detail_3?psc=1
https://www.amazon.com/dp/B073ZDQ8BK/ref=sspa_dk_detail_4?psc=1
what brand did you use, and would you recommend it.
also ferrit beads like this?
https://www.amazon.com/eBoot-Pieces-Ferrite-Suppressor-Diameter/dp/B01E5E5IY4/ref=sr_1_4?ie=UTF8&qid=1527192099&sr=8-4&keywords=ferrite+beads&refinements=p_72%3A2661618011