(Part 2) Best recording studio acoustical treatments according to redditors
We found 823 Reddit comments discussing the best recording studio acoustical treatments. We ranked the 173 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
Hi, my dude. I have advice you need.
Dig how The Golden Voice guy speaks when doing his street bit. He gets how to speak - it's not just the voice, he changes his tone and inflection as he does his 'impression'. Tone, pacing, and inflection are big tools you can use to leave people engaged in your videos, in ways where they'll leave them on in the background, and rack up views. The way you're doing it now, there's obvious passion and interest, but once I've got your info, that's going to be it.
The all-time greatest at this is Casey Kasum - that's actually a link to his blooper reel, and you can hear how the way he talks shifts between his professional voice, and his more casual way of speaking (and also it's just really interesting hearing the voice of Shaggy from Scooby Doo going off in a profanity-laced tirade over a "fucking dog"). When you're done with the gag reel, take a listen to his short ABC Special. He actually gives some great voice performance tips in it, and it shows the level he puts in.
A really brilliant example is the Forgotten Realms videos. His voice is similar, but he takes the time to pace things out, control his words, and draw people in with the inflection. It's classic radio voice, and I've got to tell you, I have put these videos in the background and forgot about them. So often I'd actually threw him cash. The guy gets it - it's a shame the videos aren't getting the return he values his time at, because the quality is top notch.
Consider getting a good mixer, and then just playing with it's volumes, getting used to how the adjustments sound. You want to sound clean and clear off your microphone - a mixer can help with that. You might also consider constructing a soundproof box for your mic, or investing in a (relatively inexpensive) booth shield for your mic. That'll take a lot off the fuzz in your voice, and give you cleaner, crisper recordings. I'd also take the time to look into a pop filter. It' a low-cost product that'll help you get crisp, clean enunciation (and correct emphasis) with your "B"s, your "P"s, and your "T"s. Trust me - being to fire off B, P, and T words cleanly and crisply will draw people in. There's something alluring about the pop letters, but for recording, those same words can throw you off completely.
I'd also take a look into playing with your recording software - a lot have features built-in that can compensate for what I've been suggesting, because most people are just amateurs who want quality-sounding audio. They'll never sound as good as the physical solutions I'm offering (and I'd really suggest sticking to those), but it'll improve the tone of your videos by a lot (and net you views) if you take the time to go for polish.
Content-wise? I hate to say it, but I never, ever play black. :D
I'd be the wrong guy to make suggesting on your takes on the cards. But I hope that studio advice helps a bit.
OP gave the link in a comment not far below this one: https://www.amazon.com/dp/B07CGWHFZM/ref=cm_sw_r_cp_awdb_t1_TmCZDbHGA8Q6J
Personally, I record my vocals using my headphones built in microphone and then process with Neutron. You'd think it'd sound terrible but heres what you do. You set up your mic, you put on the headphones, you set the audio input to be very low, you put a thick blanket over you and your laptop. The blanket helps stop reflection and keeps out quite a bit of ambient noise. Now youre not going to get a perfect recording doing this but I've never had anybody ever tell me that my vocals sounded poor. You'll get a good enough recording where processing will make it sound pretty great tbh.
heres a sample of my vocals: https://soundcloud.com/qpeakmusic/unmastered-vocal-snippet
or you could buy a microphone, an interface, and one of those cheap portable vocal booths: https://www.amazon.com/Pyle-PSIB27-Recording-Soundproofing-Isolation/dp/B0117DB5TI/ref=sr_1_4?s=musical-instruments&ie=UTF8&qid=1524684120&sr=1-4&keywords=portable+recording+booth
Thanks man, please see; https://www.amazon.com/dp/B07CGWHFZM/ref=cm_sw_r_cp_awdb_t1_TmCZDbHGA8Q6J
"Fire Retardant: CA Technical Bulletin 117"
https://www.amazon.com/gp/product/B07CGWHFZM/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
🤷🏼♀️
​
Fine, I'll get some mineral wool.
Maybe try some of these on the sides. Cut down on MAWP, and one of these for more comfort for the truck when you are prone on it.
I highly recommend getting some foam isolation pads. These work great with my Elac B6.2: https://www.amazon.com/Rockville-RRS190S-Studio-Monitor-Isolation/dp/B01DP0HI4C/ref=sr_1_1?keywords=Rockville+RRS190S&qid=1551292619&s=musical-instruments&sr=1-1
Not sure if anyone has made any comments about your monitors sitting on the desk, though I'd highly recommend both getting some isolation foam for them, as well as moving them away from the wall as they have a rear-facing bass port. You'll also want to angle the cones at your ears in your normal seating position to get the best sound quality out of them. Here's an article from E-Home Recording Studio with some rough recommendations on the subject.
Studio monitors are great speakers, but they're designed for a very-specific use case. If you aren't using them for production in some capacity, you can still take advantage of their rich sound quality if you set them up correctly. For example, I have a pair of KRK RP5G2s on my desk. While these do have a thin layer of isolating foam under them, I've still opted to place 2pair of that auralex foam under them. This way, I've got them angled right at my ears from where they are on the desk--and how low it is compared to my seating position. I've not done any additional treatment to my room, though I can only really hear major bass collection in the corners when I really crank the gain.
All-in-all, though, you setup looks great. The table is especially attractive...though if only it was in black (or something)...
I actually bought the cheaper box looking one https://www.amazon.com/Sound-Isolation-Recording-Shield-Box/dp/B0117DB5TI/ref=mp_s_a_1_5?keywords=sound+proof+box+for+recording&qid=1566233341&s=gateway&sprefix=sound+proof+box&sr=8-5 and put it in my closet - so far so good, gets the job done for me.
Something like this will work well. You want it firm enough to provide a stable base, but not so firm that it transmits the kinetic energy/vibrations of the speaker to the desk.
Sounds like you've chosen poorly.
Try this. https://www.amazon.com/Loaded-Vinyl-Square-Acoustic-Barrier/dp/B007N3356S
Here you go!
I would ask. Maybe even let the neighbor run on the treadmill while I went upstairs to see what it sounds like (choose a quiet time of morning or night, because without ambient city noise, the treadmill will sound much louder).
If there's noise coming from the treadmill making the house shake, buy a couple of these:
http://www.amazon.com/Auralex-GRAMMA-Monitor-Isolation-Charcoal/dp/B0002D0B4U
which I use to keep my musicians' amplifiers from broadcasting sound through the floor of our house.
I disagree with some of the comments. There's options you have to limit the soundwaves traveling through the walls. If you're in the cellar, there's a few things you can do to help the noise.
Mass Loaded Vinyl: https://www.amazon.com/Loaded-Vinyl-Square-Acoustic-Barrier/dp/B007N3356S
Subwoofer Pad: https://www.amazon.com/Auralex-Acoustics-SubDude-HT-Subwoofer-Isolation/dp/B00DI5AXNI/
Bass Traps: https://www.amazon.com/Column-Acoustic-Studio-Studios-Theater/dp/B01C9F83QQ/
Acoustic Panels (would recommend 2"): https://www.amazon.com/Pack-Charcoal-Acoustic-Absorption-Treatment/dp/B01KKNO9QW/
Now, the acoustic panels and bass traps are sound absorbers, not sound deadeners. In my opinion, however, if you get those last, it will improve the acoustics and accuracy of the sound you're hearing in your cellar, so maybe you wouldn't have to play it as loud.
I think the best thing you can do at first is get the subwoofer pad, followed by some mass loaded vinyl. Depending on the size of your speakers/monitors, you might want pads for those, as well. You're looking at reducing vibrations, which is what the pads and vinyl is made for. The foam and bass traps will just give you a more accurate sound.
best way is to get rid of the things that are making the noise in the first place.
get a ssd if possible to get rid of the drive noise, use rubber vibration dampeners between any moving parts and your case(fans,hdd), get better case fans like the noctua NF-A14 PWM fans.
and if that does not help you, you will want mass to dampen noise, so go get some mass loaded vinyl
don't get the foam stuff it wont help as much as you think
hope this helps
Acoustic Foam Egg Crate Panel Studio Foam Wall Panel 48" X 24" X 2.5" (4 Pack) https://www.amazon.com/dp/B07CGWHFZM/ref=cm_sw_r_cp_apa_D.V-Bb2ZC5N0M
In your choice of colours.
These are the typical ones:
https://www.amazon.com/KING-DO-WAY-Isolator-Isolation/dp/B017UC162Q/ref=sr_1_4?ie=UTF8&qid=1501542145&sr=8-4&keywords=speaker+pads
Kinda pricey for what they are, though. You can likely just buy the foam yourself at a craft store and cut to size for a lot cheaper.
I don't anticipate either of those options making an impact. I think your need is coming from behind (i.e. the room). Below is a link to Warren Huart discussing vocal recording in general. Skip to around the 4:40 mark give or take, and he has a great explanation of where to buffer reflections for home recording https://youtu.be/x_Zsn8wq5Js
As it stands, I think you might be better off getting something like this: https://www.amazon.com/dp/B01GAMP2S6/ref=cm_sw_r_cp_awdb_y9CRzbRC3YZ7X
That way you could mount them on the walls to kill some of the reflections. I glued them on some foam board from Hobby Lobby and nailed the boards on the walls. This drastically deadens the space. That way, I'm getting clear recordings. Remember, you can always add an effect in post, but it's harder to reduce or remove a printed effect. Hope this helps.
After a quick Google search, seems like they are speaker isolation pads like this: https://www.amazon.com/dp/B01B6ZIGBC/ref=cm_sw_r_cp_apa_i_dLN6Ab1TMYEXD
Have had a pair of JBL LSR305s for years and they are probably my favorite audio purchase ever.
That being said, getting some foam blocks like these to angle them made a HUGE difference.
Generic Amazon Panels:
https://www.amazon.com/gp/product/B01JNAXIII/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I'm not quite sure how much they're actually doing.. .but it looks cool at least..
Martin Logan Motion 35XT and https://www.amazon.com/gp/product/B07CGWHFZM
The KEFs are dope! I have an employee discount at BBY so the Martin Logans were an easy choice but KEF is great from what I've heard.
Good eye - I actually have 3 different types. The blue and black ones that I already linked, 4 of the corner pieces, and 20 of the bigger, higher quality foam that I didn't buy from Amazon. Let me see if I can dig up the details of what they were.
Nice! Those Yamahas are exactly what is sitting on those exact stands in my setup...with some isolation pads in between. How big are your monitors? https://www.amazon.com/gp/product/B01DP0HI4C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
You're probably aware, but might want to put some isolation pads under those monitors, since currently the cardboard boxes are adding their own vibrations to the mix. I use these and it honestly makes a huge difference for me. Everything just sounds so crystal clear with them.
I've been with them since my first build and no complaints. In my rookie years I flashed the BIOS from Windows and bricked it. Of course flashback worked and fixed it. At work, I a crappy fan that shorted and blew the regulator on the board (literally put a hole in it) and the system still works - just not the fan header. So forgiving.
I'm not the biggest on the microphone side myself, however case fans are no good either but I think there could be ways to notch out the sound. How silent is your case? Another cool thing you may like are acoustic panels for your wall. They come in different verity to suit your taste. Also you have isolation shields and boxs but it's a little clunky. Cutting the wall reflections help.
Yeah true enough, you'd be surprised the things you hear coming across peoples mic's. Keyboard clack is the least of the worry.
Hmm maybe you can try putting some of those foam sound proof tiles on your ceiling to help absorb some of the sound coming from your office?
This is sexy as fuck. I'd recommend getting some foam isolation pads for the speakers that can angle them a bit upwards, and then point the speakers at you a bit.
Nice setup. All you need, really. Consider getting some foam to tilt the monitor right at your ears: https://www.amazon.com/KING-DO-WAY-Isolator-Isolation/dp/B017UC162Q
I found them on Amazon. Very affordable!
Pair Rockville RRS190S Foam... https://www.amazon.com/dp/B01DP0HI4C?ref=ppx_pop_mob_ap_share
DaVinci resolve (free) should work.
Since you are doing voiceovers use your resources first to get a USB microphone, I have not used this model but I looked for something under $150. You can record direct to your computer.
If your budget allows look into shock-mount/pop filter and a sound isolation shield
> I'm using a Blue Yeti mic ...
Well, there's your problem, or at least a chunk of it. Condenser mics like the Yeti are simply more sensitive and will pick up more ambient sound in common use. You can try getting closer and turning down the gain a bit but the mic is simply designed this way. A dynamic mc like the ATR2100 collects less ambient sound and less echo.
You can build or buy a mic booth like this
https://www.amazon.com/Pyle-PSIB27-Recording-Soundproofing-Isolation/dp/B0117DB5TI/
though I have no personal experience with one.
!
Acoustic Foam Bass Trap Studio Soundproofing Corner Wall 12" X 12" X 12" (4 PACK) https://www.amazon.com/dp/B00TT7BGQM/ref=cm_sw_r_cp_api_5rk2xb1GWX23C
I plan on also buying these bass traps. Do I put them at the bottom of the corners? And also is just one per corner needed or more
The Knu CLD is a good choice. You may want to order an additional 14 sq ft just in case; you don't want to gut your interior then get stuck waiting for more CLD for a week. You can always throw the driver's seat back in and get to work with no interior though.
For CCF I'd recommend ensolite peel and stick from raam audio. I used this along with their BXT-II CLD tiles in my install and it's easy to work with. You'll probably need around 8 or 9 yards.
Finally for MLV I'd take the easy route and just buy this from Amazon. Should be more than enough.
Now, as an alternative, just contact the guy that runs sounddeadenershowdown.com. I've read that he is a nice guy and will help you select all of the stuff you need. The products he sells are top notch but I've heard shipping is costly. You don't seem that sensitive to price so this may be the way to go to ensure you get the right materials the first time.
Lastly, take a long look at your current install. If you don't have 1/0 gauge running to the back, 6 channel RCAs, two sets of wires run to each door, etc. consider spending the extra cash and doing all that stuff while you have the interior out.
It would be better than blocking a port, but still not great. Ideally, ported speakers want at least a foot to breathe (in a perfect world).
Isolation pads like these usually work very well: https://www.amazon.com/Sound-Addicted-Isolation-Dampening-Bookshelfs/dp/B07BRPM8K8/ref=mp_s_a_1_1?ie=UTF8&qid=1541452909&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=angled+isolation+pads+bookshelf&dpPl=1&dpID=51doJvLTaZL&ref=plSrch
I don't blame you, that's kinda an odd height. If these are just going on a desk, consider something like this to angle them towards your ears. You can find a decent variety of these things, or even just make one yourself, I just linked the first one.
The only other option I can think of is these stands, but from what I remember they're dumb expensive.
Thanks for the advice! I could get a subwoofer pad like this.
Do you have any experience with these products? Do you think it might help reduce shaking walls?
Sound Addicted - Studio Monitor Isolation Pads for 3-4.5 inches Small Speakers, Pair of 2 High Density Dampening Acoustic Stands Foam which Fits most Bookshelf's and Desktops | SMPad 4 https://www.amazon.com/dp/B07BRPM8K8/ref=cm_sw_r_cp_api_i_OCfSDb9QXRB5A
Here are some I bought a few weeks ago. They were perfect for my setup. They are small so don’t stick out, and are pitch black. I think they’d really help keep your aesthetic with your setup while also helping erase any micro vibrations.
Mounting the turntable is imho the better option:
Probably also easier/safer to do since the turntable is not that heavy.
But you can also use some cheap foam pads https://www.amazon.com/dp/B01DP0HI4C - these should do a pretty good job
I got these and love them https://www.amazon.com/dp/B00TT7BGQM/ref=cm_sw_r_cp_api_i_s43LDbDFN5YJ9
Your mic is great in soundproof rooms. https://www.amazon.com/Microphone-Soundproofing-Griffin-Soundproof-Insulation/dp/B0082DAL3S
Pyle Studio Monitor Speaker... https://www.amazon.com/dp/B07PCSQHG9?ref=ppx_pop_mob_ap_share
2 Pack Acoustic Isolation Pads,... https://www.amazon.com/dp/B07H1D66GT?ref=ppx_pop_mob_ap_share
Yes, you can get something cheap like these foam pads.
https://www.amazon.com/Speaker-Monitor-Isolation-Dampening-Stabilizer/dp/B01B6ZIGBC/
You can also use all kinds of things laying around that are similar in height, like text books, tuna cans and bananas.
It also looks like one speaker is toed in more than the other, you can play around with that a bit but try to keep them on a similar angle to each other as a proper position will give you a good center image.
Noise cancelling head phones (with or without music playing) and a white noise machine or fan may really help. Maybe move your bed to a wall farther away from the source of the noise, if it isn't already as far as possible.
Other than that, there's not much you can do. I know your pain, though. Growing up with noisy siblings and neighbors, paired with thin walls, was a living nightmare. I regularly daydreamed about bombing their stereos and televisions just so I could imagine getting some peace and quiet.
Edit: You can put up some soundproofing foam panels like this or hang thick quilts on the walls as well. This should help insulate from a fair amount of outside noise. :)
https://www.amazon.com/Acoustic-Foam-Studio-Soundproofing-Corner/dp/B00TT7BGQM/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1506553162&sr=1-3&keywords=bass+trap
https://www.amazon.com/Acoustic-Isolation-Pads-Studio-Monitor/dp/B07H1D66GT/ref=sr_1_3?crid=1AYCWMX6CR9SH&keywords=foam+speaker+wedge&qid=1556323928&s=gateway&sprefix=foam+speaker%2Caps%2C147&sr=8-3
these little guys will serve you well
Something like these may help. Not sure if you'll need more, but there's also a 48 pack for less than double the price. Not sure about the effectiveness of 1 inch vs 2 inch pads though
I'm the first to recommend a small mixer or audio interface and dynamic cardioid microphones for your setup, but let's save that recommendation for later.
You are going to have an incredibly difficult time eliminating cross talk and attempting to record on two tracks with your setup. The reason for the crosstalk issue is that the Blue Yeti is a condenser microphone which means the diaphragm which captures the sound is powered and very sensitive. This is actually a great thing given an audio controlled environment such as a sound booth where room echo or reverb and ambient sounds can be controlled. In your average home this is a nightmare and people end up spending hundreds if not thousands of dollars for room treatments when a simple hardware purchase of a dynamic microphone can solve most of those issues without redecoration your recording space. One way to combat this is to make a microphone vocal box. You can DIY a vocal sound box like this one. Or you can spend a few hundred dollars one. You can also just use a pillow fort around your microphones to test it out. This probably won’t eliminate your crosstalk issues but it might help control it some.
The other issue with two USB microphones can be solved as /u/BangsNaughtyBits stated but just beware, these solutions have a tendency to break at inopportune moments.
Now I'm going to return to a hardware solution. If you are recording in the same room I'll often recommend a Zoom H4nPro, a Zoom H5 or a Zoom H6 recorder and two XLR Microphones. I started with the Behringer XM1800s which if you are cash strapped I'd still recommend. However, if you can afford a bit better microphone I'd suggest a Blue enCore 100 or a sE Electronic V7 for each person in the sub $100 range.
I don't have this problem, but you could go to a hardware/crafts store, buy some cheap foam, cover it with fabric (so it doesn't look like crap), then hang it on your walls. Should do well to dampen the sound your neighbors are hearing.
If you don't want to spend the time making them, you could spend the money
Put sound panels on it
https://www.amazon.com/gp/product/B01JNAXIII/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Got them from Amazon https://www.amazon.com/gp/product/B01GAMP2S6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
To mount them I just bought a can of spray adhesive. It all went up pretty easily.
Here's our space: https://i.imgur.com/BcBpnEv.png
I prioritized room treatment to minimize echoing since we're recording an audio drama (improv comedy sci-fi) and quality vocals are a must. The sound panels behind each seat are these acoustic panels from Amazon mounted to tri-fold foam core display boards from the dollar store.
Our show is Dispatches from the Multiverse, if you're interested to hear how it sounds ;)
https://www.youtube.com/watch?v=W2SBmvBbIYI
PM me your address again so I can send you some of the square panels that are clogging up my closet -- I was able to hang a couple of them out of my asshole cat's reach, but I still have a bunch that are doing absolutely nothing but collecting dust at the moment
---------------------
square foam panels:
https://www.amazon.com/gp/product/B074JK1GKJ
mainly chose them since they had four stars across 50+ reviews, and had 2.5 inches of depth (vs. the majority on amazon that only push out 1 inch)
huge difference in sound quality -- much less reverb, way easier to make accurate decisions when mixing, not nearly as much random bullshit getting picked up when recording vocals
honestly felt similar to when I made the jump from 60hz monitors to 144hz monitors a couple years ago
------------------------
how to treat a room:
https://www.youtube.com/watch?v=ZitBGg9zGfg
https://ehomerecordingstudio.com/acoustic-treatment-101
https://www.youtube.com/watch?v=6-dOSD1KoNU
----------------------
bass traps:
just as important as the square panels
https://www.amazon.com/gp/product/B00TT7BGQM
https://ehomerecordingstudio.com/bass-traps/
tl;dr: if you have a square room, buy 8 bass traps, and hang two in each corner (one touching the ceiling, one touching the floor)
side note, these things are huge: https://i.imgur.com/YNuuobB.png
-------------------------
hanging everything up:
https://www.amazon.com/gp/product/B074KR7LZ1
-------------------
cc: /u/iamtheamaznazn
This may look familiar, I posted my setup briefly a couple weeks ago but deleted it. I’ve since made some changes and took better photos. Now I’m ready to share!
I switch between the PC & Mac with a USB switch that’s connected to a hub with my keyboard/mouse/mic/webcam/etc, and then change the input source on the monitor. The TV above me isn’t normally on, I really only use it when on the couch behind me.
I use the MacBook 90% of the time, but when it’s time to do video editing or rendering I fire up the big boy:
16-Core AMD Ryzen Threadripper 1950X 3.4GHz
NVIDIA GeForce GTX 1080
32GB DDR4
500GB SSD + 3TB HDD
---
The rest:
LG 34” Monitor
https://www.amazon.com/gp/product/B074JKT894/
ATS Acoustic Panels
https://www.amazon.com/gp/product/B00QH2RJW2/
Table Lamp
https://www.amazon.com/gp/product/B074XPNS3Z/
Monitor Stand
https://www.amazon.com/gp/product/B01NBVBQKZ/
And of course the usual IKEA KARLBY countertop & ALEX drawers. The floor lamp is also IKEA: HEKTAR.
Thanks for the reply! I've got regular 1ft by 1ft auralex tiles (96 of them) and then I've got these bass traps.
None of them are in frames. I've just got the tiles and traps. I also have some OC703 about 6 inches thick but I can handle the hanging of those. It's just these flimsy foam panels giving me an issue. I've got enough of them that the damage free hangars are gonna be a serious pain in the ass. The inverted shelf strip does seem like a good idea acoustically, i haven't seen that before. Thanks again for the ideas.
Thank you! I purchased these, and these for the corners:
https://www.amazon.com/gp/product/B01C9F83QQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/Acoustic-Foam-Studio-Soundproofing-Corner/dp/B071XNPW6G/ref=pd_sbs_267_1?_encoding=UTF8&pd_rd_i=B071XNPW6G&pd_rd_r=A1CPFEV7C5JFMCAHZFM8&pd_rd_w=dhXGn&pd_rd_wg=4sqPT&psc=1&refRID=A1CPFEV7C5JFMCAHZFM8
Honestly it's 99% decoration. You'd want to order a thicker model in higher quantity.
https://www.amazon.com/A2S-Protection-Acoustic-Insulation-Quality/dp/B01GAMP2S6/ref=sr_1_1?ie=UTF8&qid=1474819839&sr=8-1&keywords=sound+dampening+foam+48 a couple sets of these might work.
Happy humping ;)
you would likely need an additional power source, IE, solar panels and a deep cell battery, an isolator, or else a generator. Sound proofing it wouldn't be difficult since its a small space. You would have to start from the bottom with proper sound proof material like some [rattle trap] (https://www.amazon.com/dp/B00DYAF9FY/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=28XYGYZEEI9GN&coliid=I3FV8PPDJWQ5BU&psc=1) and or thicker panels in the build then once the walls are in you could get some sound [foam panels] (https://www.amazon.com/Charcoal-Acoustic-Panels-Studio-Wedges/dp/B01JNAXIII/ref=sr_1_1?ie=UTF8&qid=1474918666&sr=8-1-spons&keywords=acoustic+foam+panels&psc=1) and such to hang up inside. Its possible with the knowledge and the proper funds to do it.
is this what you mean by a diffuser? https://www.amazon.com/Microphone-Diffuser-Isolation-Absorber-Griffin/dp/B0082DAL3S?ie=UTF8&*Version*=1&*entries*=0
if so, that's what i was referring to when i said 'reflection filter'! i wasn't sure what they were called and by googling random words i found someone refer to it as reflection filter a couple times so i just posted that. but yeah a diffuser is exactly what i was thinking of. i'm not the best at articulating myself with regards to these things but yeah basically it seemed to me like i was recording and the sounds would echo and bounce off of different parts of the room (it's a large-ish room in which i record) and come back to the mic and just give it a muffly sound, so maybe isolating the mic off with some sort of padding behind it might be useful so that sounds aren't bouncing around like that. based on your and cesarjulius' responses though i'm wondering if maybe i have the wrong idea about what's actually going on when i record
You don't need a completely silent PC for music production. Don't keep the extra hardware in the same room you're recording in and the mic simply won't pick it up.
When I did production in home honestly I just kept my pc 6 feet away from my recording "booth" and my booth was insulated drywall framed with 2*4's that were reinforced in wall with screws.
Out some of these (https://www.amazon.com/dp/B01EIHFOTM/ref=cm_sw_r_other_apa_AaJwxbPEQVYX1) in the booth and on the outside of the booth
Hope that helps
www.flagz.net for samples.. Anything post 2014 is in an even worse embodiment with no sound proofing sitting right next to my gaming pc.
I had a similar situation but I bought some isolation pads (https://www.amazon.com/dp/B07BRPM8K8?ref=ppx_pop_mob_ap_share) and use them in a way that angles the center at a slight upward angle.
12 Pack- Charcoal Acoustic Panels Studio Foam Wedges 2" X 12" X 12" (12PCS, Black) (30305cm, Black) https://www.amazon.com/dp/B076NSFQ75/ref=cm_sw_r_cp_apa_i_Y0RxDb4VMJY8W
This is really all I can think of but its not very visually appealing.
https://www.amazon.com/Acoustic-Isolation-Pads-Studio-Monitor/dp/B07H1D66GT/ref=sr_1_3?crid=2H3LELXDZA2KF&keywords=speaker+isolation+pad&qid=1564558703&s=gateway&sprefix=speaker+isol%2Caps%2C199&sr=8-3
Thanks!
Sound absorbing (or in some cases, diffusing) pads. When I ripped the carpet out if this room and installed the solid floor it threw the acoustics way out of whack, so I definitely had to do a little treatment. The rug helps, too.
Example:
https://www.amazon.com/dp/B076NSFQ75/ref=asc_df_B076NSFQ755425474/?tag=hyprod-20&creative=395033&creativeASIN=B076NSFQ75&linkCode=df0&hvadid=198093834376&hvpos=1o2&hvnetw=g&hvrand=4672421092785182867&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9031686&hvtargid=pla-390387946052
It's pretty much exactly 130hz. I played a sine wave at different pitches and that frequency sticks out as the loudest alongside 180hz as well.
In that case would something like this do the job? I certainly can't afford anything else.
I will try out EQing though, see how it goes.
https://www.amazon.com/Auralex-Acoustics-MOPAD2PK-Acoustic-Isolation/dp/B009EPP1EM
These Auralex foam pads are designed exactly for this. There's probably a cheaper knockoff out there or you could diy with some foam or some wood cut in similar shapes. They also mitigate vibration. I'd recommend adding a piece of rubber or dense foam to the top of the stands either way to reduce vibration and movement of the speakers on your stands.
Yeah man you can use blankets n stuff if you don’t have the money or option to buy foam panels and put them on the walls.
here’s a good option too. This paired with hanging thick blankets around the room will probably be your best bet.
Try hang rugs or tapestries if you don’t want to do anything permanent. You could also put sound proofing foam on the walls too. Something like this
https://www.amazon.com/48-Acoustic-Panels-Studio-Wedges/dp/B00TP52HCK/ref=asc_df_B00TP52HCK/?tag=hyprod-20&linkCode=df0&hvadid=241985258521&hvpos=1o1&hvnetw=g&hvrand=1921050125587974333&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9005904&hvtargid=pla-617623670824&psc=1
If you have to make what you have work, I'd highly recommend some isolation pads at least. I used these for over a year before I upgraded to stands and could tell a difference! https://www.amazon.com/Sound-Addicted-Isolation-Dampening-Bookshelfs/dp/B07BRPM8K8/ref=mp_s_a_1_4
These are what I have, for both my speakers sets in my bedroom and my computer room.
Isolation pads (Amazon)
You'd need to buy enough foam and broadband absorbers, and don't forget the corners to cover everything but the prices seem ok.
To cancel all the noise you'd need a much more expensive professional solution but you're not going to be playing music, are you?
I've used mass loaded vinyl. I've used it personally. I bought so much of it, that it was delivered freight on a pallet and I needed a friend to help me transport the roll inside. It. Doesn't. Work.
If you want to buy it, knock yourself out. I even went through the trouble of finding a supplier for you. Enjoy.
https://www.amazon.com/Soundproofing-Acoustic-Eggcrate-Studio-Wedges/dp/B01EIHFOTM/ref=sr_1_4?ie=UTF8&qid=1499445396&sr=8-4&keywords=acoustic+tile
Yes it is feasible, but I think you're overthinking it. A single sheet of plywood slightly larger than the window opening with weatherstripping around its perimeter will do just as well at making an airtight seal, then you can cover the plywood with some egg carton style acoustic foam. Basically you're making one of these acoustic panels, then sealing it over the window opening. To get the most out of it you'll need to hold the panel tight against the wall, which means screws or glue. Depending on the wall material screw holes are very easy to patch when the time comes.
This still work better.
48 Pack Acoustic Panels Studio Foam Wedges 1" X 12" X 12" https://www.amazon.com/dp/B00TP52HCK/ref=cm_sw_r_cp_apa_i_qsBBDbP4P74CK
I have http://www.amazon.com/Auralex-GRAMMA-Amplifier-Acoustic-Isolation/dp/B0002D0B4U/ref=pd_cp_MI_1, and a 12" Klipsch.
Haven't gotten complains yet, but our floors are concrete so that may play into it. I don't blast it either and just occasionally watch movies that are loud enough to the point where the sub is really noticeable.
Awesome, thanks for the response. Looks like I'll be picking one of these up. There seems to be one dedicated to subwoofers whereas yours is for amps and loudspeakers, is there any reason or is one higher quality?
Edit: These are the two i'm talking about
http://www.amazon.com/Auralex-Subwoofer-Isolation-15x15x3-inch-Charcoal/dp/B001140OZ0/ref=sr_1_7?ie=UTF8&qid=1376941401&sr=8-7&keywords=Auralex
http://www.amazon.com/Auralex-GRAMMA-Monitor-Isolation-Charcoal/dp/B0002D0B4U/ref=sr_1_8?ie=UTF8&qid=1376941401&sr=8-8&keywords=Auralex
I'm no expert on this, but have you looked into mass loaded vinyl? For example, https://www.amazon.com/Loaded-Soundproofing-Barrier-Highest-Quality/dp/B007N3356S
Sure thing!
It's these: 12 Pack- Ice Blue/Charcoal Acoustic Panels Studio Foam Wedges 1" X 12" X 12" https://www.amazon.com/dp/B01JNAXIII/ref=cm_sw_r_cp_apip_u8qdwpHWEOjYA
Attached to this: Privacy Room Divider https://www.amazon.com/dp/B00CKR1TOC/ref=cm_sw_r_cp_apip_CH9flAoVyTGaE
Using this: Acoustic Foam Spray Adhesive Glue Can https://www.amazon.com/dp/B00WJ1AV0W/ref=cm_sw_r_cp_api_tAfPzb52D37JY
Those are sound dampening panels, they're used to improve the audio quality of your recordings, not for fireproofing - though if they're anything like these they have a Class A flame spread rating, which is pretty good (i.e. doesn't burn easily).
Thick blackouts and acoustic panels are 100% correct. Also one of these guys for your sub would help tighten the bass up: http://www.amazon.com/Auralex-GRAMMA-Amplifier-Acoustic-Isolation/dp/B0002D0B4U
https://www.amazon.com/dp/B076NSFQ75/ref=asc_df_B076NSFQ755411530/?tag=hyprod-20&creative=395033&creativeASIN=B076NSFQ75&linkCode=df0&hvadid=198093834376&hvpos=1o3&hvnetw=g&hvrand=2952694566961028205&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9025430&hvtargid=pla-390387946052
Also get some foam pads, they make a big, big difference. The low end will tighten up a lot. https://www.amazon.com/Auralex-Acoustics-Acoustic-Isolation-Charcoal/dp/B009EPP1EM?th=1
You could try acoustic panels on the shared wall.
If you can, pick up a mic surround, it will make a huge difference in the source recording quality and allow you to "add back in" the right level of effect (levels, reverb). Like this: http://www.amazon.com/Microphone-Diffuser-Isolation-Absorber-Griffin/dp/B0082DAL3S but you can make one for like 1/10 that price with eggcrate foam.
Since they are unidirectional (cardioid) mics then I would suggest facing them away from each other as much as possible. That what they record less of the other person and more of your voice. Putting something in between you two to shield the sound from the other person's mic might help a bit as well. Possibly a mic shield like this one or this one (if you can get them in Canada).
The thought is to get as much of your sound into your mic and to shield as much of Lynn's voice from your mic as possible. Therefore I would put the mic shield close to your mic but directly facing away from Lynn and vice versa.
Something similar to these:
2 Pack Acoustic Isolation Pads, Studio Monitor Speaker Isolation Foam Pads, Pair of Two High Density Studio Monitor Isolation Pads Pair For 5 Inch Monitors
https://www.amazon.com/dp/B07H1D66GT/ref=cm_sw_r_cp_apa_i_VYp4DbYVZ16SY
You may try soundproof regular cabinet, with something like this https://www.amazon.com/ATS-Wedge-Acoustic-Panels-Charcoal/dp/B00QH2RJW2
It could be a Behringer C1? But that giant bulbous black thing with blue on the inside is clearly some type of add-on that could probably be used with many mics.
... Which I think is trying to be a cheap version of one of these:
Pyle PSMRS08 Compact Microphone Isolation Shield, Studio Mic Sound Dampening Foam Reflector https://www.amazon.com/dp/B0117E33PG/ref=cm_sw_r_cp_apa_jPAYzbX204F48
I don't have exp. with it but have heard mass loaded vinyl is good. Not sure how it compares to just hanging an exra sheet of drywall or layering a brick facade though.
Speaker stands are custom built utilizing various Lego and Megablox bricks and plates.
Micca isolation pads are here
I've used these Audiolex GRAMMA isolators - it was expensive but worth it in my case - much less 'rattle'. You may want to try it and return it if it doesn't help that much.
Take this with a grain of salt, but I think so. I will be purchasing these soon. I can let you know how it works out. https://www.amazon.com/gp/product/B01GAMP2S6/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=AZDBGW3MVFF0M
These are the ones I bought:
https://www.amazon.com/gp/product/B009EPP1EM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Yeah I know these aren't REAL bass traps or broadband absorbers, but considering the benefit that this simple kit gives, its a pretty good value:
http://www.amazon.com/gp/aw/d/B00TT7BGQM/
and
http://www.amazon.com/gp/aw/d/B010GPFRUQ/
I made my own bass traps which outperform these and cost less. But if you were on a budget and wanted a noticable improvement, I would buy these.
> gik art panel acoustic
those look expensive, but really nice. Is there a cheap alternative if you don't care how the wall looks? Something like this: https://www.amazon.com/gp/product/B01GAMP2S6/ref=ox_sc_act_title_1?smid=AZDBGW3MVFF0M&psc=1 ?
If you're referring to the traps in the corners, they're actually not very high quality. I got them pretty cheap on Amazon. They're not bad for the price though.
The panels on the ceiling and side walls are from GIK Acoustics.
​
https://www.amazon.com/gp/product/B071XNPW6G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
​
https://www.gikacoustics.com/product/gik-acoustics-242-acoustic-panel/
Bought these isolation pads for the micca mb42x speakers. Makes a huuuge difference. So thanks everyone who told me I was an idiot for not having them before
I posted about a month ago my "standing" setup, a couple of people wanted to see how it looks in regular "sit" mode.
Didn't mention previous post, but this monitor is amazing for sit/stand setups. The arm moves up and down with just 2 fingers, virtually no wobble too! So I have it on the lowest setting in sit mode, and extend it all the way in stand mode. Here is a more direct comparison https://imgur.com/a/XB71Iik.
I had good results on a full-sized van for about $350 using a box of Dynamat for $150 and a roll of MLV for $200. I was able to reuse the foam already on the floor.
I tried to get about a 30% coverage with the dynamat, focusing a little more on panels that sounded louder when I tapped them (like the wheel wells). I know in cost-is-no-object installs they go for, like, 120% coverage, but a more conservative approach seemed to work just fine for me.
I did 100% of the floor and up the firewall with the MLV, and then hung it most of the way up inside the walls. I didn't do inside the front doors because lazy, and also because on this vehicle the thin single-barrier door seals are the main source of cabin noise.
Good results for the money IMO, it makes my 1991 van sound a lot more like a modern vehicle. Road and exhaust noise is greatly reduced. I still get a lot of wind noise from those damned door seals, but you won't have that issue on relatively modern Excursion.
Would some angled isolation pads like these be a decent alternative to stands/cinder blocks? https://smile.amazon.com/gp/product/B017UC162Q/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=A3I4IYVZFDM8T
If you want to charge people use the studio yes.
Cheaper alternatives:
A sound isolation box
A closet filled with clothes. This works very well and is free
A smaller room. Larger rooms is where echos really start to be noticed.
Hang blankets around the room. Sometimes this is hard to do without nailing in to walls, but if you can figure it out, this will help too
https://www.amazon.com/gp/product/B01JNAXIII
These here. you gotta get some command strips or double sided tape of some kind to affix them to the wall though.
Looks good. I suggest wall mounting the TV to raise it up a little bit so you can put the center speaker below the TV on top of the TV stand. This would put the 3 front speakers at the same height.
Place the center speaker on a foam isolation pad, angled up towards the main seating position. A couple of these:
Monitor Isolator Pads Studio Monitor Speaker Isolation Foam https://www.amazon.com/dp/B017UC162Q/ref=cm_sw_r_cp_apa_4S0yybVD6BGBE
I suggest spreading out the front speakers a little more as well (6" more on each side) and angle them in slightly towards the main listening position.
I'd swap out those curtains and shades for light blocking ones as well.
There are some good movies on that 2nd shelf for demoing the setup, some of my favorites.
I'm honestly not sure... In my personal experience, it helps to have something to absorb the sound, like a carpet. I have a drum kit in my room, and I moved a carpet in there some time ago, which definitely made a difference in the sound resistance.
I'm also pretty sure acoustic wedges like this are generally a standard in soundproofing a room. Hope this helps!
I ended up buying two packs of [these] (https://www.amazon.com/gp/aw/d/B00TP52HCK/ref=ya_aw_od_pi?ie=UTF8&psc=1) after my roommate started complaining about hearing me stream during the night. Covered my wall with these and now she says she can't hear anything when I stream.
As Zeeall said, get them off of whatever they'll be on. You can get some cheap foam on amazon. I'd also recommend getting some foam panels to put on the wall. Put them on the wall behind the speakers as well as the wall where your neighbors are. A bunch of bass traps for the corners would also be good.