Heavy-Duty Lifting Capacity for Heavier Items
The PHL-1R is both tough and durable, and it’s built to handle heavier items up to 250 pounds. The heavy-duty steel support beams and 4-by-4-foot platform are made from high-quality materials that are made to handle tough loads and provide years of consistent performance. The unit is built to lower 8 feet from the ceiling, accommodating storage spaces with taller ceilings. The drill driver attachment allows you to raise and lower the platform using your own drill.
The unique pulley system makes it easy to raise and lower heavy items with minimal effort on your part. With a durable winding axle that works in conjunction with the pulleys and strong nylon cables, the PHL-1R handles the brunt of the weight so you don’t have to, while raising or lowering the platform quickly and smoothly.
Safety Lock Ensures Safety and Stability
The innovative safety lock ensures that the load stays locked into place when fully raised to the ceiling. Simply use the winding crank to engage the safety lock when the platform is raised to its highest position, and use the winding crank’s integrated hook to disengage the safety lock and safely lower the platform.
An Additional 16 Square Feet of Storage Space for Your Garage
The PHL-1R’s tough 4-by-4-foot platform gives you an additional 16 square feet of valuable storage space in your garage or storage area. This allows you to store your lawn mower out of the way during the winter or to store your snow thrower during the summer months, clearing valuable floor space and creating tidier, more useful quarters.
The RacorPro PHL-1R HeavyLift Storage Rack measures 49.25 x 17.5 x 7.25 inches (packaged) and weighs 74 pounds (packaged). It comes in a smooth black finish and includes all necessary hardware. Additional tools required for installation include: stud finder (for drywall ceilings), adjustable or box end wrench, socket wrench, cordless drill/driver, Phillips screwdriver, pencil, and a 4-foot straightedge or chalkline.
What’s in the Box
Winding crank assembly, two arm assemblies, two cable assemblies (including nylon cables), three wire grids, two wire beam supports, center spindle square end, center spindle round end, gear drive, Allen wrench, four end caps, 20 hex bolts, four Allen head screws, two hex head screws, two fender washers, eight long machine bolts, 16 washers, eight nuts, 12 “J” hooks, 12 washers, 12 nuts.