(Part 3) Best cell phone screen protectors according to redditors

I got this one and it's been great so far. No haloing and it works with the spigen liquid air case.

https://www.amazon.com/OMOTON-Tempered-Protector-Compatible-6T/dp/B07KCTJLF2

Yup Fakespot saved me many times. The only legit glass screen protector thus far seems to be this one.

Ordered it and it should arrive here on Wednesday :)

Edit: whoops, turned out it was a plastic protector :/

LPT: Use a cell phone screen protector to avoid scratching your screen in the first place.

I ordered the Orzly screen protector. It's one of the few that curves around the edges. It takes awhile to ships since I think it comes from the UK, but it's cheap enough to just try out.

https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LWSHNC5/ref=sxts_k2p_hero2?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=2668835622&pd_rd_wg=14XC6&pf_rd_r=Y05M56WJ4M58ZCRQKB41&pf_rd_s=desktop-sx-top-slot&pf_rd_t=301&pd_rd_i=B01LWSHNC5&pd_rd_w=MT9q5&pf_rd_i=orzly+pixel+xl&pd_rd_r=CFQ2BE3958N2YG54ANF0&ie=UTF8&qid=1478707438&sr=2

i bought the yootech

https://www.amazon.com/gp/product/B01LY8LVSB

Skinomi Amazon

This isn't a recommendation for a screen protector but a suggested application method. Most of you on this sub probably already do something similar. I always had trouble getting the screen/protector 100% dust and fingerprint free. Not sure where I heard it but I decided to apply the protector in the bathroom after letting a hot shower steam up the room for a few minutes with no exhaust fan. This weighs down any dust particles and will create a clean work environment.

On a side note I looked for a good tempered glass protector for the wife's pixel 2 and couldn't find one that had full coverage and allowed for a case due to rounded and tiny bezel. For $8 I ended up going with IQ Shield LiQuidSkin Full Coverage Screen Protector for Google Pixel 2
https://www.amazon.com/dp/B073RV1T6R/ref=cm_sw_r_cp_apa_Oi5WBbQMF15ME

She isn't picky but has had no complaints after a year of use. It has had many drops, 8 month old baby.

I got these cheap ones until I find a better option like the Whitestone Dome.
Honesty I've had one of them on for the past two weeks and have had no issues at all - there's even four of them and it's super cheap.

[4 Pack] OMOTON Google Pixel 4 XL... https://www.amazon.com/dp/B07VCJHS76?ref=ppx_pop_mob_ap_share

Edit: Spelling

Was only planning to use it for mouse and keyboard, but all ports are USB 3.0 so thought I'd future-proof myself in case anything more went in there.

It's an extra three cables on top of everything else, but it's powered by the USB dock that sits on top of my desk (which is mains powered).

I've got an incredibly similar setup to OP, I just love the ease of pressing a single button and it's done within a second. Just wished it changed my monitors as well!

Sits alongside an HDMI switcher as I also have a PS4 hidden away as well

I got this and love it.

OMOTON Nexus 6P Screen protector [2 Pack] - [9H Hardness] [Crystal Clear] [No-Bubble] Tempered Glass Screen Protector for Huawei Google Nexus 6P [5.7 Inch] https://www.amazon.com/dp/B014SL8BWU/ref=cm_sw_r_cp_apa_unnAzbGZD803C

I bought this when I got my 4xl

https://www.amazon.com/dp/B07VCJHS76/ref=cm_sw_r_other_apa_i_2ED2DbQXQ2Y05

Comes in a 4-pack and with an alignment tray (I've been skeptical of these in the past but it really worked perfect) plus Omotion has a pretty good track record on Amazon. The first one I tried had a bubble, so I took it off and tried again and still had a bubble but decided I'd live with it and save the other 2 for just in case. Within 24 hours the bubble worked itself out and it's now flawless, I probably could have left the first one I tried. I use it with a Spigen clear case and it's been perfect so far. For less than $10 bucks I'm extremely satisfied

Spigen iPhone X Screen Protector Tempered Glass 2 Pack [ Edge to Edge Protection ] for Apple iPhone X (2017) https://www.amazon.com/dp/B079H5M5VN/ref=cm_sw_r_cp_api_i_kIa4AbEEPKS3F

Skinomi edge to edge. It’s a wet instal type and you need to let it dry, preferably overnight. I got it aligned the first time but you get six covers. This is my first watch so I don’t have experience with any others.
https://www.amazon.com/Skinomi-Protector-TechSkin-Coverage-Anti-Bubble/dp/B07HNR2JML/ref=sr_1_5?ie=UTF8&qid=1539864135&sr=8-5&keywords=skinomi+apple+watch+series+4

AmFilm film Ultra Glass finger print scanner performance is much better than the 3 other brands I have tried. Like a naked screen good.

https://www.amazon.com/dp/B07QF3B12P/ref=cm_sw_r_other_apa_i_sscMDb9G5EW3Q

https://youtu.be/EcSht_KwJJY

I'll post it below. If you decide to give it a shot don't be intimidated by the contents of the box. There are alot of parts in the box but the instructions are really clear on how to install it. Another neat thing that I like about this screen protector is that it doesn't really attract fingerprints. I had read that before I bought it not thinking anything of it but they really weren't kidding it does a good job at repelling fingerprints. I bought this one cause every plastic protector for me ended up getting dirt under it and ever other glass protector had some kind of flaw. This one was worth the slightly higher price for me but it's also not as expensive as the Whitestone or Whitestone brand.

amFilm Ultra Glass Screen... https://www.amazon.com/dp/B07QF3B12P?ref=ppx_pop_mob_ap_share

I have the intelliGLASS max coverage .2mm on my 6P. I bought my wife the same one but for her 5X, and it saved her screen already. Easy application, installation videos are available, and I feel it's a great price for the quality

Rainbow edge effect. So annoying and took me many before staying with iCarez [Full Coverage Tempered Glass] Screen Protector for iPhone X (Case Friendly) Highest Quality Easy Install [2 Pack 0.3MM 9H 2.5D] with Lifetime Replacement Warranty - Retail Packaging https://www.amazon.com/dp/B074H1MX1Z?ref=yo_pop_ma_swf

They make it just right. It fits in my Caseology Legion and girlfriends Otterbox Symmetry with no rainbow effect or case edge lifting.

Thank me later...

Best iPhone X Screen Protector

Also go for a dbrand skin if you want your back glass and sides to stay scratch-less... It’ll make holding the phone while naked much more enjoyable.

dBrand Skin

Got this one with great reviews. I checked the reviews on fakespot and it says the reviews are 90% genuine. https://www.amazon.com/Protector-Maxboost-Tempered-Protectors-Accurate/dp/B073DLZWX7

I messed up the first one, but then I with the second figured out how to do it and get it to look perfect. No bubbles and a 99% perfect fit. Still have one extra since it’s a 3 pack.

I prefer to have a cutout for the camera area and I’ve been using iPhones and screen protectors since the iPhone 4S. I’ve never had any damage to the camera area. That way there aren’t any light reflections or etc messing with the light sensor, Face ID, and the selfie camera.

I would avoid this one because the cut out for the notch is wrong. https://www.amazon.com/iPhone-Protector-amFilm-Tempered-Installation/dp/B074ZNLM9J

They are all pretty much the same when it comes to quality. Don’t spend more than $10 for one. I have this one but you’ll find plenty like this one for less. I had a full coverage one but my case lifted up the screen protector :(

For what it's worth, I just put on a screen protector I'm very happy with. I didn't want to spend the $40 for the Whitestone Dome since I'll get the Note 9 in a few months.

I found this tempered glass one on Amazon. It installed really simple, no bubbles and looks great. Only knock on it is it's pretty reflective but other than that, it stuck really well.

Galaxy S9 Plus Screen Protector Glass, amFilm 3D Curved Dot Matrix Full Screen Samsung Galaxy S9 PLUS Tempered Glass Screen Protector (6.2") 2018 with Easy Application Tray (NOT S9) (Case Friendly) https://www.amazon.com/dp/B079YC1TRH/ref=cm_sw_r_cp_apa_ey9VAbRQX42PY

Skinomi Apple Watch Series 4 Screen Protector (44mm)(Edge to Edge)(6-Pack), TechSkin Full Coverage Screen Protector for Apple Watch Series 4 (44mm) Clear HD Anti-Bubble Film https://www.amazon.com/dp/B07HNR2JML/ref=cm_sw_r_cp_api_i_09X3Bb1XN5A6F

I got these the other day, cheap for a pack of four and they cover the entire display while still leaving enough space for a case.

Leaves the top cameras/face unlock/Soli unprotected however, but I’ve found screen protectors that cover this portion tend to get dust underneath or make picture quality worse.

Would definitely recommend these.

[ 4 Pack ] OMOTON Pixel 4 XL Screen Protectors

I just bought this one (seems to be on a sale, hooray). It should arrive tomorrow so I'll edit this to see if it worked. Otherwise I'm gonna have to return the Yeti.

I use this one and the hinge method that they use makes it easier to install. Comes with a installation video too!

• Orzly are based in the UK and sell on Amazon (next day delivery with prime). I have one of these on my fathers Nexus 9 and would definitely recommend them, good fit and the oleophobic coating resists fingerprints well - http://www.amazon.co.uk/dp/B016ONT0RK
  
  
  
• Intelliarmour are getting a lot of good feedback. They they don't have any stockists in the UK so you have to wait/pay for delivery but that being said - they're currently doing a 2 pack for 12.95USD & when coupled with their "intelli6p" coupon, means you can get 4 (2x2packs) for around £13 (gbp) delivered to the UK - http://www.intelliarmor.com/intelliglass-nexus-6p-the-smarter-real-glass-screen-protector.html
  
  
• Spigen also do a TGSP but they don't provide an edge-to-edge version - I actually cancelled my pre-order as they changed the design without letting anyone know. I really wouldn't recommend this due to the fact that this will probably begin lifting off of the screen easily, and the fact that parts of the screen are still susceptible to damage - www.amazon.co.uk/dp/B016CBF5VO/
  
  
• Ringke - I've never used their TGSP's but their cases are great so I don't see why their other products would be any different - http://www.amazon.co.uk/dp/B006MMHBNY/
  
  
• Casebase - I have also never used these, but have heard good things on XDA - http://www.amazon.co.uk/dp/B016Y6RPR4/
  
  Hope this helps!

Nexus 6P intelliGLASS HD Max Coverage (0.2mm) - https://www.amazon.com/dp/B0197TU662/ref=cm_sw_r_cp_apa_IEgMzb5WNB9EZ

I have reviewed many screen protectors, and ended up going back to IQ Shield and Skinomi. Both of them use high quality materials, and both of them have a lifetime warranty.

There are some tempered glass screen protectors, but I have not had a lot of good experience with them.

If you are using a case, you might want to use the cornerless screen protectors in order to prevent the corners from being pushed up.

Here is a link:

http://www.amazon.com/Protector-Shield%C2%AE-LiQuidSkin-Coverage-Anti-Bubble/dp/B01BG2EJYS

Make sure any protector you get says it's 2.5D glass, this is the one I use and it doesn't do that.

https://www.amazon.com/gp/product/B073RV1T6R/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

You have to watch a little youtube video of how to up it on but it's by far the best one I've used and it's cheap.

I use the iCarez for a while now and I am super Happy. The price is great too and it is usable with most cases. https://www.amazon.com/iCarez-Coverage-Tempered-Protector-Replacement/dp/B074H1MX1Z/ref=sr_1_3?ie=UTF8&qid=1519034562&sr=8-3&keywords=icarez+iPhone+X

These are the ones I use and they’re fantastic. You can hardly tell theyre on the phone.

iCarez [Full Coverage Tempered Glass Screen Protector iPhone X iPhone Xs 5.8-Inch (Case Friendly) Easy Install [2 Pack 0.3MM 9H 2.5D] Lifetime Replacement Warranty https://www.amazon.com/dp/B074H1MX1Z/ref=cm_sw_r_cp_api_YzN0BbE0MVER8

Honestly, I think most are pretty comparable these days. Especially when looking at Amazon reviews.

This is the one I am currently using and am very happy with it.

And this is the one I plan to try out as well. I’m hoping the extra bit around the edges will get rid of that odd gab most screen protectors are designed with to accommodate cases. I will probably post on this sub the results when I do.

Also, these things are so cheap now that I would recommend buying several to try out if you can afford it. The extras they come with are handy so once you decide which one you like you don’t have to reapply the same one!

If you find one you like reply here and let me know which one and why:)

I got this one as recommended by the Wirecutter. It comes with an alignment tool but it’s tricky to get right. I haven’t dropped my phone or anything to tell you how durable it is but it seems great and I forget it’s there when using the phone

Depends on what type of case you’re looking for. For screen protectors I use this.

It is exactly like the Tethys one but costs more and comes with less screen protectors...

​

https://www.amazon.com/dp/B07FQZ8Y1V/ref=psdc_2407781011_t3_B07H8FNKJ7

https://www.amazon.com/gp/product/B07FQZ8Y1V/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 I ordered this one now, it has a good review so will see how long it will last. It's just funny that I payed 40$ for a single screen protector and on amazon, I pay 5$ for three...

Dirt doesn't get stuck under thin film screen protectors and they don't come off when swimming. You're thinking of those ugly condom cases.

I've got the 'Skinomi Apple Watch Series 4 Screen Protector', both on my 44mm and my Wife's 40mm series 4. Work like a champ. I also have the Spigen Rugged Armor case on order, it should be delivered here in a few days. That along with apple care, should all but a car wreck, protect it!

​

Skinomi:

https://www.amazon.com/gp/product/B07HNR2JML/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B07HSS4KYJ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

​

Spigen:

https://www.amazon.com/gp/product/B07HSS4KYJ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

https://www.amazon.com/dp/B07HSK96MZ/ref=psdc_11591908011_t3_B07HSS4KYJ

I'm pretty sure you couldn't damage the watch with these type of install. I mean the watch is water proof, right?

I was more talking about how the install can be tedious. You have to move slowly to make sure the screen protector ends up in the right position. A slight nudge of a finger at the wrong moment can throw it all off. Ended up messing up my first attempt for this reason.

It's also a pain to make the edges stay put since the film itself isn't curved. The trick that worked for me was to use a hair dryer on the screen protector for a few second after applying it to the face of the watch. Then I wrapped the watch in a microfiber cloth, and applied pressure in the palm of my hand for a few minutes. That did the trick.

Also, these screen protectors need time to set and dry. It looked really rough with micro bubbles and clouding last night after the install, but this morning pretty much all those issue were gone.

Here's the Amazon link: https://www.amazon.com/gp/product/B07HNR2JML

OMOTON Tempered Glass Screen... https://www.amazon.com/dp/B07KCTJLF2?ref=ppx_pop_mob_ap_share

I like it. Fingerprint sensor works. It even came with a plastic 'guide' to make the screen go on perfectly. I love it. Also hilarious that on the backing for it it said 'Better than you expect', which is hilarious and true.
Only downside is that it seems to collect dust and fuzzies on the sides, almost as if there is adhesive on the side too and I have to clean it occasionally. Starting to get better though.

OMOTON Tempered Glass Screen Protector Compatible with OnePlus 6T 6.41 inch [2 Pack], Not Full Coverage https://www.amazon.com/dp/B07KCTJLF2/ref=cm_sw_r_cp_apap_CUPqOaHlgsNlr

I had the same issues as you with screen protector I had. I purchased this one after seeing a few others on Reddit talking about it. I've only had it for a few days, but it seems fine.

https://smile.amazon.com/gp/product/B07KCTJLF2/ref=ppx_yo_dt_b_asin_title_o01__o00_s00?ie=UTF8&psc=1

This one fits right to the edge of the screen, not the glass and works well. Comes with an alignment tool.

https://www.amazon.com/gp/product/B07KCTJLF2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

> I read that you can't use a glass screen protector without losing the in screen fingerprint scanner !

There are several screen protectors that work with the S10+ fingerprint reader. AmFilm Ultra Glass and Whitestone Dome Glass are the two most popular, however many companies are starting to offer similar kits.

I got the AmFilm tempered glass screen protector one.

It's really nice! It covers 99% of the front glass surface, save for about 1mm of the edges so that there aren't incompatible cases (some cases are so tight that they push the screen protector off the screen). I can confirm that the fingerprint sensor works with the AmFilm protector, and no decrease in touch sensitivity was noted even with Touch Sensitivity deactivated.

Just make sure that you clean off ALL dust before installing. The glass will crack if you try to remove the protector, so you basically get one try. The nice thing is that they've got a warranty so you get a 2-pack replacement.

I purchased the omoton, easy to put with the alignment frame and it looks perfect. Not pricey and you get 4 for only 10 dollars.


https://www.amazon.com/gp/aw/d/B07VCJHS76?psc=1&ref=ppx_pop_mob_b_asin_title

Mocha

This, this, this, this, AND this all add up to $7.41 from mu $15 & under list. :) I needs to protect my new phone.

Don't worry! Your cold will pass! :)

sick as a dog

Thanks for the contest!

Congrats! Make good art.

[This] (http://www.amazon.com/iPhone-Anti-Glare-Anti-Scratch-Anti-Fingerprint-Finishing/dp/B0042FV2SI/ref=wl_it_dp_o_pd_nS_nC?ie=UTF8&colid=GSDXMIUT23M4&coliid=I25LUSOW8XPHUA) much needed phone cover please.

Sorry for the late reply,

It's this one.

https://www.amazon.co.uk/Anker%C2%AE-PowerIQ-Charging-Samsung-Motorola/dp/B00VE4UJD4/ref=sr_1_1?ie=UTF8&qid=1466736695&sr=8-1&keywords=anker+usb+3+powered+hub

I'd shop around a bit as I paid less than the one in the link is listed for, but it works fine.

https://www.reddit.com/r/oculus/comments/4pcx0b/oculus_sensor_and_usb_30_hub_does_it_work/

https://www.amazon.co.uk/Anker%C2%AE-PowerIQ-Charging-Samsung-Motorola/dp/B00VE4UJD4/ref=sr_1_1?ie=UTF8&qid=1466736695&sr=8-1&keywords=anker+usb+3+powered+hub

I'm a fan of the [Omoton] (http://www.amazon.com/protector-Tempered-Protector-Hardness-No-Bubble/dp/B014SL8BWU) tgsp. On my second one because my first got crushed in my car door (no damage to phone). I promptly ordered a second set. 2 for less than $10.

Guys it's the Omoton TGSP. Surprisingly streamlined for a two pack for $9. Here is the link.

This looks like the one you're after.

Check out either the Spigen Rugged Armor or the Unicorn Beetle Pro. The first one is more of a slim/sleek option and the second is more akin to an Otterbox. I own both and I prefer the Unicorn mostly because I'm clumsy and it'll protect from drops. It's a fair amount thicker than the Rugged Armor however. As for glass screen protectors, check out the Spigen Glass Screen protector. It's a perfect fit and I've had my screen saved once by it. Smooth to the touch as it should be.

Links
Spigen Tough Armor- https://www.amazon.com/gp/aw/d/B016CBFBVI

Unicorn Beetle- https://www.amazon.com/SUPCASE-Holster-Full-body-Protective-Protector/dp/B015X9UR2S?th=1&psc=1

TSGP- https://www.amazon.com/Protector-Tempered-Glass-Cutout-Proximity-Easy-Install/dp/B016CBF5VO

Sorry for the late response. I'm a 20something year old female student so I'm not sure my app needs will be the same as yours - generally any of the apps you've been enjoying on your iPhone will be available for your 6P too. I have a DBrand skin on mine (the dark mahogany finish) which is nice for minimal case-less use, but I also have a Spigen case and gorilla glass screen protector for optimal protection that I would highly reccommend(things tend to get scuffed easily going in and out of purses/pockets etc).

I usually find app recommendations on r/Nexus6P.

I'm using the Spigen Rugged Armor (http://amzn.com/B016CBFBVI) and it really is a nice case. I haven't put it to the test yet but after putting the 6P into it I do know I felt a lot more comfortable with where I lay the device and so on. That said the rhino shield bundle setup Evolutive Labs is coming out with looks like a for sure winner. I even placed an order for their full bundle but it's going to be January sometime before it's even suppose to be out. So till then I'll gladly sport Spigen's case. I might even pick up their screen protector. They have a tempered glass one out now (http://amzn.com/B016CBF5VO)

intelliGLASS HD Max Coverage this is my exact step up and it fits like glove you will not be disappointed. If you look at the photos at the reviews section one of them is with the blue supcase that should give you an idea.

https://smile.amazon.com/gp/product/B0197TU662/ref=s9_dcacsd_dcoop_bw_c_x_1_w

Here's what I'm working with:

• [Screen Protector] (https://www.amazon.com/gp/aw/d/B01BG2EJYS/ref=ya_aw_od_pi?ie=UTF8&psc=1)
  This was the first screen protector I have applied to any phone. Even with the curved edges, I have had zero problems! This has been on my phone since March. 10/10 would recommend.
  
  
• [Case] (https://www.amazon.com/gp/aw/d/B01A7IDNWQ/ref=sxl1?ie=UTF8&qid=1466686220&sr=1&pi=AC_SX236_SY340_FMwebp_QL65)
  Have not run into any issues, and I'll drop my phone once a week onto hardwood. Kick stand is fairly durable.
  
  
• [Earbuds] (https://www.amazon.com/Plantronics-BackBeat-Wireless-Earbud-Headphones/dp/B00DIOALPE)
  On the expensive side, but they come with 3 sets of rubber covers to fit any ear shape.
  
  I do not have a powerbank and my battery life is still as incredible as Day 1. For any cables, I use www.monoprice.com

I have this one and it works fine with GearVR.

IQ Shield® LiQuidSkin - Samsung Galaxy S7 Edge Screen Protector [Full Coverage] & Lifetime Warranty - HD Ultra Clear Film - Protective Guard - Extremely Smooth / Self-Healing / Bubble-Free Shield https://www.amazon.com/dp/B01BG2EJYS/ref=cm_sw_r_other_awd_Xbh5wb7J255YS

True that. I just settled with the Shield IQ LiquidSkin because I've heard the tempered glass never fit the S6E properly. The screen protector is nice and I can't even tell it's there. Would feel safer with tempered glass, however.

All the screen protectors people listed look like crap when you don't cover the entire screen. I'm using this one.. it is edge to edge, full coverage. My ONLY complaint is the little dots you can see in sunlight. But, love the coverage. Google Pixel XL Screen Protector, Orzly 2.5D Pro-Fit Tempered Glass Screen Protector for Google Pixel XL (5.5 inch model - 2016) - Transparent with CHARCOAL BLACK Rim https://www.amazon.com/dp/B01LWSHNC5/ref=cm_sw_r_cp_apa_nmnsybDT49J78

For a glass protector, I have the Yootech one and I'm happy.

I just ordered a Yotech Tempered Glass kit, I'll post results and PM you if it's better. https://www.amazon.com/gp/product/B01LY8LVSB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

i have Skinomi's and they are excellent. $7 for 2. and they'll replace them for free if you apply them wrong. fits perfect. no bubbles.

https://www.amazon.com/Protector-Friendly-Skinomi-Anti-Bubble-Application/dp/B071RFGSBF/ref=sr_1_1?ie=UTF8&qid=1519048365&sr=8-1&keywords=skinomi+s8+plus

$42 seems a bit much for one screen protector, but from what I've seen, the Whitestone Dome is an excellent screen protector because the adhesive glues the entire panel, rather than just the sides.

Personally, I recommend any TPU screen protector. They tend to be a lot cheaper (like $3-8 on Amazon). A TPU protector is a rubbery layer that doesn't offer quite as much protection, but it gets the job done if you pair it with a case that has a lip.

I've been using this one from Amazon for about two and a half years which came in a two-pack, but I'm still on the first one: https://www.amazon.com/Protector-Friendly-Skinomi-Anti-Bubble-Application/dp/B071RFGSBF
and the case I use with it is the Spigen Tough Armor: https://www.amazon.com/Spigen-Tough-Armor-Designed-Galaxy/dp/B06XP4FP8N

I haven't had any good glass ones yet. But I love the one I have now

Galaxy S8 Plus Screen Protector[2-Pack] https://www.amazon.com/dp/B071RFGSBF/ref=cm_sw_r_cp_apa_cs0LAb0H9ST6M

I bought the g-color case-friendly version, and The sides did not stick well on that one. And my case peeled them up.

Just email their customer service line, send a pic and they'll refund you.

I ordered [these]
(https://www.amazon.com/gp/product/B071RFGSBF/ref=oh_aui_detailpage_o00_s02?ie=UTF8&psc=1) and it works great! The instructions mentioned pushing the liquid out the sides, and then waiting about 15-20 minutes before trying to push down the sides. This worked great for me. Been going 3 weeks now with no peeling up.

I use the Supcase Unicorn Beetle.

The Whitestone Dome is the only tempered glass protector I've found that works worth a damn.

These are the best TPU wet install screen protectors I've tried. Better than the Spigen Neoflex by far.

I ended up getting this one: https://www.amazon.com/gp/product/B073RV1T6R/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

I had a few others before this and I had to return the few because of dot matrixes and other issues. This one, since it's not tempered glass, fits the phone very well. Only negative is that it is rubbery-feeling and I usually can't stand screen protectors that have this feel. But check it out if you're desperate like I am.

I didn't like any of the tempered glass options, so I went with the IQShield liquidskin

I just found this one and reviews say it does not impact faceID. I ordered it, I’ll report back when i get a chance to use it.

I have a spigen protector on now (2 pack for like $10) and I just don’t like the cutout for the notch.

Hey, sorry for the late response.

It’s this one
iCarez [Full Coverage Tempered Glass] Screen Protector for iPhone X (Case Friendly) Highest Quality Easy Install [2 Pack 0.3MM 9H 2.5D] with Lifetime https://www.amazon.com/dp/B074H1MX1Z/ref=cm_sw_r_cp_apip_TlfOFlReFm3ZM

Yes, it’s good. There’s also one which is 3D (they call it that because it extends to the sides of the screen) but I wouldn’t recommend that. There have been reports of dust and lint getting trapped between the protector and causing scratches.

I also found a video of this protector and I based my purchase off it: https://youtu.be/yoSapSTW2vI

This is the best one I’ve found.

I like the iCarez one. Just has a little hole cutout at the top.

this is the one i have, as long as you put it on absolutely perfectly it shouldnt cut out the edges.

amFilm Glass Screen Protector for iPhone XS / X (5.8 Inch)(3 Pack) iPhone 10s / 10 Tempered Glass with Easy Installation Tray https://www.amazon.com/dp/B074ZNLM9J/ref=cm_sw_r_cp_api_i_bLwADbX0F74PJ

I've used amFilm Glass Screen Protector on my XS and now my 11 Pro, in my opinion they're the best glass screen protector I've ever used and I've used quite a few.

amFilm Glass Screen Protector

You get 3 in this pack which is just a steal for the quality and price. The screen protector also covers a wider range of the actual screen itself so there's no rainbow effects as far as I can see. The edges are also very smooth so you won't really even feel them as you glide your fingers them.

​

Now as far as case goes I'm using the Razer Arctech Slim case for my 11 Pro and the fit, finish and look is just killer. I also like the fact that it does indeed cool down your phone if it ever heats up. My screen used to dim when I was outside smoking and the sun was beaming down on it. With this case that doesn't happen anymore. I'm extremely pleased with the case and it's one of the best ones I've had on any of my iPhones.

Razer Arctech Slim Case

I have a Mous case. But I use a ProClip phone holder in my car, so I don’t have the magnet issue. Previously, I also used it with an iOttie OneTouch which worked well too. I have a Spigen Edge to Edge Screen Protector with it. You can’t even tell its there, since the case covers up the sides and the bezels.

Front Facing Pic

Spigen Comes with 2, and you don't even notice that it's even there

Spigen iPhone X/XS Tempered Glass: https://www.amazon.ca/Spigen-Tempered-Protector-Protection-Friendly/dp/B079H5M5VN/ref=sr_1_3?ie=UTF8&qid=1538748092&sr=8-3&keywords=spigen+iphone+x+screen+protector

I just bought this spigen one and it’s great.

Spigen iPhone X Screen Protector [ Tempered Glass x 2 ] [ Edge to Edge Protection ] 2 Pack for Apple iPhone X (2017) https://www.amazon.com/dp/B079H5M5VN?ref=yo_pop_ma_swf

Yep, this is the tempered glass one I was talking about.

https://www.amazon.com/gp/product/B079YC1TRH/ref=ppx_yo_dt_b_asin_title_o06__o00_s01?ie=UTF8&psc=1


While, it's ridiculously easy to put the screen protector on, you will more than likely end up with something that resembles an oil stain. Mine was not bad, but it was dead center on the screen protector and became very noticeable sometimes. If you scroll down to the images on amazon, some users show some pretty extreme examples of what I'm talking about.

From what I understand, it's a result of the screen protector only having adhesive around the edges underneath it.

The more expensive ones that I was talking about uses a liquid adhesive. I think white dome or something like that is what a lot of people recommend, but I'm not going to pay that much for a screen protector.

I use this one

https://www.amazon.com/gp/product/B079YC1TRH/

TETHYS Glass Screen Protector Designed for iPhone XR (6.1") [3-Pack] [Edge to Edge Coverage] Full Protection Durable Tempered Glass Apple iPhone XR w/ Guidance Frame Included (Pack of 3) https://www.amazon.com/dp/B07FQZ8Y1V/ref=cm_sw_r_cp_api_i_omR2Cb4QGEXM5

I personally use the iPhone X version, and I absolutely love them.

3 pack w/alignment tool for $7

TETHYS Glass Screen Protector Compatible iPhone XR (6.1") [3-Pack] [Edge to Edge Coverage] Full Protection Durable Tempered Glass Apple iPhone XR w/Guidance Frame Included (Pack of 3) https://www.amazon.com/dp/B07FQZ8Y1V/ref=cm_sw_r_cp_api_i_SgwTCbKCF2K5J

If you're looking into protection that won't add too much bulk, I went with this case and couldn't be happier. I've always bought Spigen in the past and they offer solid protection (usually go with a non-clear case but how could I not show off the beautiful color of this thing??)

As for screen protector I went with this. Fits perfectly with the case and seems to be good quality. Came with a plastic frame insert to guide installation and everything.

https://www.amazon.com/gp/product/B07FQZ8Y1V/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

really nice mate, barely notice its on there, installation was super easy. I had to use more than 1 because i didnt read the instructions and got air bubbles. but my 3rd one came out perfect. if you arent a fuck up like me you wont need more than 1.

I think it’s this one... https://www.amazon.com/ArmorSuit-Screen-Protector-Coverage-MilitaryShield/dp/B07HCNHYGW/

A good second choice would be https://www.amazon.com/Skinomi-Protector-TechSkin-Coverage-Anti-Bubble/dp/B07HNR2JML

won't prevent impact damage...like tile floors, but lessens the scratching substantially

https://www.amazon.com/gp/product/B07HNR2JML/

amFilm Ultra Glass Screen... https://www.amazon.com/dp/B07QF3B12P?ref=ppx_pop_mob_ap_share

amFilm Ultra Glass Screen... https://www.amazon.com/dp/B07QF3B12P?ref=ppx_pop_mob_ap_share

Here is good working screen protector for the s 10 that works with the in screen fingerprint sensor

Galaxy S10 Screen Protector, [Dome Glass] Full 3D Curved Edge Tempered Glass [Exclusive Solution for Ultrasonic Fingerprint] Easy Install Kit by Whitestone for Samsung Galaxy S10 (2019) - 1 Pack https://www.amazon.com/dp/B07NQ2MBSW/ref=cm_sw_r_cp_apa_i_RZLgDbXWM5R1M

Here is one for the s 10+


amFilm Ultra Glass Screen Protector for Galaxy S10 Plus, (2 Pack) UV Gel Application, Tempered Glass, Compatible with UltraSonic Fingerprint Scanner for Galaxy S10 Plus (2019) https://www.amazon.com/dp/B07QF3B12P/ref=cm_sw_r_cp_apa_i_AVLgDb6RT9SYQ

I've heard a bunch of love on this particular screen protector, I just noticed it's on sale. It's normally around or over $50. Not sure exactly what you're wanting to spend. But an option.

amFilm Ultra Glass Screen Protector for Galaxy S10 Plus, (2 Pack) UV Gel Application, Tempered Glass, Compatible with UltraSonic Fingerprint Scanner for Galaxy S10 Plus (2019) https://www.amazon.com/dp/B07QF3B12P/ref=cm_sw_r_cp_apa_i_7QdjDb8J69XB1

Also, on mobile and sorta new to Reddit. Sorry about the long link.

https://www.amazon.com/dp/B07VCJHS76/ref=cm_sw_r_em_apa_i_7cf1DbX18XPTD

(screen protector)[http://www.amazon.com/dp/B0042FV2SI/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3F24DWLBJGEW0&coliid=I1NHCGBZ9TZWZG&psc=1]

Thanks for this contest

http://www.amazon.com/iPhone-Anti-Glare-Anti-Scratch-Anti-Fingerprint-Finishing/dp/B0042FV2SI/ref=br_lf_m_1000908331_1_3_ttl?ie=UTF8&s=wireless&pf_rd_p=1566964302&pf_rd_s=center-3&pf_rd_t=1401&pf_rd_i=1000908331&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1N1QJ8Q777K1PHCSXVYY

Sorry long link. I always needed one! Also bacon pancakes, which sound really good right now.

That's weird, my friend just told me about how he cut himself. He's been using it with the cracked screen for a while now, even playing fruit ninja on it and he has finally hurt himself! http://imgur.com/BDbOS

I suggested that he buy a screen protector - not sure if it will stick correctly to the cracked screen but I don't see why not! :)

Edit: grammar

[Done!] (http://www.amazon.com/iPhone-Anti-Glare-Anti-Scratch-Anti-Fingerprint-Finishing/dp/B0042FV2SI/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=19XIKAS79AJYG&coliid=I2RNV24WQXDUVD) Happy birthday!!

Happy birthday! Here's my least expensive item

And here's the second-least expensive too because the first is a functional, practical thing and sometimes you feel like gifting something fun instead.

This was already on my wishlist at 1.15.

peanut butter and jelly sandwich minus the peanuts since I'm allergic. Congrats on all the karma :)

My Case:

Beautiful Matte Black

And let's not forget the matte screen protector:

unnnnffffff

$16 for a snazzy case and screen protector. You're welcome.

woohoo

thanks for the contest :D

I use this hub: Anker 10 Port 60W Data Hub with 7... https://www.amazon.co.uk/dp/B00VE4UJD4?ref=ppx_pop_mob_ap_share

You’ve given me a thought about cable management and using the profile slot. Could I get away with covering it with some of the plastic slot colour SimLabs have on their site.

There is a powered USB3 hub with a PSU by Anker which is really good -

https://www.amazon.co.uk/gp/product/B00VE4UJD4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Their customer support is good too.

I've had 4 portable drives running off it so it's got the power and well made.

There's not a TB>USB hub like you describe as far as I know. But maybe a TB3 aka USB type C version out there. Not sure if TB 1 or 2 can provide that level of power though... So make sure you get one with a PSU.

Drive storage... I've seen places just use units with drawers or another place uses lockers with keys which I guess adds some security. Either way it's a fucking nightmare.

Good point. I have a USB3 hub that provides power only (no data) to 3 of the ports and that seems to charge ok but of course there's no data over that link which makes Duet impossible.

I'm using this for everything on my PC at the moment:

https://www.amazon.co.uk/gp/product/B00VE4UJD4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

It's got external power so that's not a worry, and it's handling my mouse, keyboard, headset dock, webcam, microphone, etc just fine.

Also just fyi, the word in English is "peripherals" :)

Like you I quickly found all hubs to just be complete fail for my audio equipment. Never thought USB hubs and cables were shit until I started trying to plug music hardware into them, some would intermittently disconnect, some would cause ghost 'buttons' to be pressed all sorts of malfunctions.

For some reason it seems music hardware is very sensitive to shitty cables and/or cheap hubs.

I had a push2 an Akai Advance 61, and a keystation mini and have had many issues running these through with cheap hubs and cables.

I tossed out all my crappy USB hubs and got this.

https://www.amazon.co.uk/d/USB-Hubs/Anker-PowerIQ-Charging-Ports-iPhone-Samsung-Motorola/B00VE4UJD4/ref=sr_1_2?s=computers&ie=UTF8&qid=1482171290&sr=1-2&keywords=usb+hubs+powered

This is what I use now, everything has worked great for me since even after adding more hardware. A hub with mains powered ports is a must.

Like this? http://www.amazon.com/protector-Tempered-Protector-Hardness-No-Bubble/dp/B014SL8BWU

I've got the spigen armor and it's great... but I keep switching between that one and the supcase pro... I highly recommend the spigen case.
As a matter of fact, I skipped the diztronic case because this spigen is TPU also.

I bought these screen protectors: https://www.amazon.com/gp/aw/d/B014SL8BWU/

https://www.amazon.com/gp/aw/d/B014SL8BWU/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1 I bought this it's two for a good price. Quality is also.amazong

https://www.amazon.com/gp/product/B014SL8BWU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

works perfect

I've been using the OMOTON TGSP since last January. It's fared well until now, where the oleophobic coating is starting to wear down and I can see more fingerprints. It's a two-pack for the same price as some individual ones, so I'd probably buy it again.

I've tried several and finally got this and was very impressed: https://www.amazon.com/gp/product/B014SL8BWU

I have a Spigen TGSP that I love. My buddy has the Intellliarmor and it's very nice too. Both are very fingerprint resistant, easy to apply, and both have been able to handle all the cases we've tried - Spigen Rugged Armor, Diztronic TPU, Spigen bumper case, and the official Adopted case.

I've loved the Spigen Glas.tR SLIM screen protector. https://www.amazon.com/Protector-Tempered-Glass-Cutout-Proximity-Easy-Install/dp/B016CBF5VO It has a bevel on the edge and is case friendly, and has all if the cutouts. Absolutely love this, no complaints, especially at that price.

I grabbed a Spigen screen protector to go with my Spigen Rugged Armor Case:

http://www.amazon.com/Protector-Tempered-Glass-Cutout-Proximity-Easy-Install/dp/B016CBF5VO?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_search_detailpage

I would recommend getting a Tempered Glass Screen Protector. I have this Spigen one and it's been great.

I'm still undecided on a case. I tried the Microfiber one from the Google store and it doesn't work well with a glass screen protector and the buttons were kinda mushy so I sent it back. I may just go naked with the screen protector since I have Nexus Protect.

Also, I'm a Dad of almost 2 year old twins so I can relate to your lack of free time.

Same.

I have this screen protector: http://www.amazon.ca/gp/product/B016CBF5VO?psc=1&redirect=true&ref_=oh_aui_search_detailpage

I have this case (I removed the built in screen protector):
http://www.amazon.ca/gp/product/B0198TFQ66?psc=1&redirect=true&ref_=oh_aui_search_detailpage

I didn't and wish I had... Had it in the same pocket as my keys and now has a small scratch on the screen... Went on amazon and bought a spigen glass cover for 9.99... Love it so far and can't notice the scratch underneath anymore.

https://www.amazon.com/gp/product/B016CBF5VO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

This or this?

I don't see anything on either of them about being "case-friendly".

I absolutely love my supcase. The frosted back is a great way to show off the nexus back without being completely translucent and tacky looking. I've dropped it several times, because I suck, and have yet to drop it. I have the max coverage intelliglass and it works well with the supcase.

Nop, This one

This one right? http://www.amazon.com/gp/product/B0197TU662?redirect=true&ref_=s9_simh_gw_p107_d0_i1

Because I dont see the cutout for the sensor =/

https://www.amazon.com/dp/B01BG2EJYS/ref=cm_sw_r_other_awd_M7qkxb81XYBXV

It's easy to apply and you won't have to worry about scratches on the screen.

So far for me only two screen protectors have worked, otterbox alpha glass and iq shield which has a lifetime warranty. There are tons of other good options but almost none of them will fit with a case.

iQ Shield
https://www.amazon.com/Galaxy-Protector-LiQuidSkin-Coverage-Anti-Bubble/dp/B01BG2EJYS

Otterbox Alpha glass
https://www.amazon.com/gp/aw/d/B00Z7RMJ1O/ref=mp_s_a_1_1?ie=UTF8&qid=1487701283&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=otterbox+alpha+glass+s7+edge

I have had this after a few days of owning it, it's been over 6 months and it's holding great, it's starting to peel on the bottom left edge from taking it out of the case but I'm. Very happy with it! I got the matte version but I suggest anyone to buy the clear version. I got the back also, it must be flawless if I ever decide to remove them

I just put this one on mine. https://www.amazon.com/gp/product/B01BG2EJYS

It went on super easy. But the sides around the curved part didn't stay down at first. But I have this case on it https://www.amazon.com/gp/product/B01BLI4FOG which the front green part is actually a separate piece and it held the sides down while they set/dried.

No bubbles/dust specs etc. I do feel I lost some sensitivity though not much but once in awhile i have to swipe down a few times for the notification bar to come down. (Could also be me getting used to the phone also since I've had it for not even a week.)

This is the one with the bad dot matrix:
https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LWSHNC5

There are a few others too, but I don't believe the Intelliarmor has a dot matrix.

ORLZY tempered glass!

Pixel
https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LYQRKMG

XL
https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LWSHNC5

It took a couple minutes to apply correctly, but it comes with some tools like a sticker that is used to remove dust beforehand. I love mine and plan to leave it on for the foreseeable future, but it's worth noting that some people find the following problematic:

• there's a grid of dots that can be seen in certain light or using Daydream VR. I think this props the protector up over the screen

• there's a slight rainbow haze from a certain light

For me those are very minor, and I'm glad that my Pixel has a more black look, especially for watching videos I find it more immersive. The dot issue might be more noticeable if you use a XL in VR mode though.

I've checked out the reviews for the Orzly and it seems like it has issues too.

The Orzly 2.5D screen protector is on sale on Amazon right now for $7.99 for the Pixel and Pixel XL

Pixel
Pixel XL

I like this case from Orzly. Had problems with the halo effect on others but this one covers even the chin. Wasn't too hard to get on the phone, either. Just be careful if you're using a case not to place it where the screen protector will get pushed off. I have just a basic silicone case and I placed the screen protector with the case on, just to be safe.

I dropped my pixel XL about 5 feet and it landed on the screen side. This was only 48 hours after receiving it. Looked at the screen and it looked cracked. I peeled the screen protector and it absorbed the fall. The screen is fine. This is the protector I have on it (it comes with two of them). This is the case I've been using, got it for 3 bucks on a sale a few weeks ago.

Yootech has really good reviews.

Yoooooooooootech

I have this one. I would recommend it. https://www.amazon.com/dp/B01LY8LVSB/ref=cm_sw_r_cp_apa_NC2gyb46SNG41

Edit: this is the updates version that's a bit wider to cover screen better https://www.amazon.com/gp/product/B01M69PTSV?tag=viglink20238-20

When you mentioned about the Rhinoshield screen protector, I went to Amazon to take a look at the reviews on it, and almost all of them say that the screen protector either goes right to the edge of the AMOLED display, or is a bit shy and still exposes it.

https://www.amazon.com/Google-Pixel-Screen-Protector-Impact-Resistant/dp/B01MDNWN9D/ref=sr_1_2?ie=UTF8&qid=1477981487&sr=8-2&keywords=rhinoshield+pixel+xl

The best one that I've tried is the Yootech TGSP, and they've even released a newer version that would cover slightly more than the viewable display itself.

https://www.amazon.com/XL-Protector-Tempered-Featuring-Anti-Scratch/dp/B01LY8LVSB/ref=sr_1_2?ie=UTF8&qid=1477980685&sr=8-2&keywords=yootech+pixel+xl

It's the Yootech 2.5D Glass Screen Protector (Amazon Link) There should be an updated version, this one isn't available anymore

I just got mine today and installed one and had the same issue, sent an email to support.

Hopefully they'll refund me too.

This is the one I got: https://www.amazon.com/gp/aw/d/B01LY8LVSB/ref=yo_ii_img?ie=UTF8&psc=1

For full coverage, the one I've heard the most good things about is the Intelliarmor Intelliglass Pro screen protector. You can find that one on www.intelliarmor.com.

Edit: Disregard. I am so sorry, thought they had the IG Pro for the Pixel, but it appears to only be for the Pixel XL. In that case, the only one with full coverage that isn't absolutely dismal is the Google Pixel Screen Protector, Orzly 2.5D Pro-Fit Tempered Glass Screen Protector for Google Pixel Phone (5 inch model - 2016) - Transparent with CHARCOAL BLACK Rim

I had the Orzly:
Google Pixel Screen Protector, Orzly 2.5D Pro-Fit Tempered Glass Screen Protector for Google Pixel Phone (5 inch model - 2016) - Transparent with CHAR https://www.amazon.co.uk/dp/B01LYQRKMG/ref=cm_sw_r_cp_apap_sBiFbDLKCVV3A

Pros: Fantastic fit, and edge to edge cover
Cons: Seemed to be a finger print magnet. The bezel colour was black rather than dark grey

Edit: I actually remembered it did get weird rainbow effect under certain lighting

Sorry I'm travelling for a while so I didnt get to do it yet (my phone looks hideous in this transition phase, living with a terrible screen protector) I did find some good screen protectors that are easy to apply and have as much coverage as possible without sacrificing usage.

These 2 should be good to try it out on:

Link 1
Link 2

These 2 are good but theres some sacrifice involved, the first one creates a layer in between your finger and the touch screen which would look ugly and MIGHT affect responsiveness to touches, the second one involves a tricky way of applying (waiting 24 hours or something) and is more expensive as well.

Link 1
Link 2

I'm not sure where to begin to be quite honest with you, I was going to get the one with the black bits on the bezel but now I'm unsure, should I manage to do it I'll post again here and maybe even make a separate post about it, but for now this is all I know, I think that there are ways to get this done easier soon like companies are making full screen Tempered Glass protectors for the Pixel and IntelliGlass might have done a good job but it doesnt look like the problem has been fully solved.

If you have any updates though let us all know! :)

Orzly do one that covers the 2.5D edge, I was looking for one too and had bought a pixel case from them and stumbled upon the screen later so haven't received it yet:

https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LYQRKMG

This is the one i ordered

https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LYQRKMG/

My pixel is still processing so i can't tell you how it feels yet.

https://www.amazon.ca/gp/aw/d/B01LYQRKMG/ref=yo_ii_pd_dx_gr_2?ie=UTF8&psc=1&refRID=7QZE1WAGTF9X25JD0268

Orzly

Had no issue with this one at all, complete coverage, only slight complaint would be the finger marks, but it's kind of expected

https://www.amazon.com/Protector-Friendly-Skinomi-Anti-Bubble-Application/dp/B071RFGSBF/ref=sr_1_2?ie=UTF8&qid=1505768551&sr=8-2&keywords=galaxy+s8+screen+protector+skinomi

That's the one I use on my S8+. You basically spray this water/soap solution they provide you onto the screen protector, then you put it on your phone and let it dry. I've dropped my phone several times with this on and a good case and haven't had any issues. That being said if there was really good quality glass screen protector I would get it. People say that the Whitestone Dome Glass is really good, just too expensive for me so I use these instead and like them. I did use glass screen protectors when I had the S5 and will say they provide better screen protection. Just so many of the ones for the S7 Edge, S8, and S8+ only have adhesive on the sides and that ruins touch sensitivity.

Weird. Every phone I've ever had, except the one that i put a huge otterbox on, it was a cutout on the edge. Like this protector, currently on my phone.

I am trying out the new spigen tempered glass screen protector, but the skinnomi tech skin was extremely tight and slim. Will probably protect from things like keys and stuff crating the screen. Hopefully better drop protection than nothing. But obviously it won't offer the same protection that a tempered glass will.
https://www.amazon.com/gp/aw/d/B071RFGSBF/ref=yo_ii_img?ie=UTF8&psc=1


I use the speck Presidio grip case with my s8 plus; not sure if that would leave the edges open enough for you. I need the protection.

I'm referring to these two:

Pixel 2: https://smile.amazon.com/Google-Protector-LiQuidSkin-Coverage-Anti-Bubble/dp/B073RV1T6R/

Pixel 2 XL: https://smile.amazon.com/dp/B073RV6PQD

Case: Ringke Fusion

Screen protector: IQShield

I ordered these from Amazon. Cheap and hopefully don't interfere/look shitty.

What did you go with? I went with this IQ Shield
https://www.amazon.com/gp/product/B073RV1T6R/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

but I'm one of those who fell into the 'best avg. customer review' trap. :(

I normally go with this brand (iCarez) for all my glass shields, but the full coverage tempered glass is by far my favorite. Can’t even tell it’s on and comes close to the edge.

iCarez [Full Coverage Tempered Glass] Screen Protector for iPhone X (Case Friendly) Highest Quality Easy Install [2 Pack 0.3MM 9H 2.5D] with Lifetime Replacement Warranty - Retail Packaging https://www.amazon.com/dp/B074H1MX1Z/ref=cm_sw_r_cp_api_YgKgAb3W50FXR

Speaking from experience, you’re not gonna like it after a couple of weeks. It will eventually collect dust around the clear border and will become increasingly distracting.

I eventually ended up trying to find an edge to edge screen protector with a black border but clear notch area:

iCarez [Full Coverage Tempered Glass Screen Protector for iPhone X/Xs 5.8-Inch (Case Friendly) Easy Install [2 Pack 0.3MM 9H 2.5D] https://www.amazon.com/dp/B074H1MX1Z/ref=cm_sw_r_cp_api_i_NM8UCbDE53JHM

I use this brand for both my X and Switch. As long as you put it on straight without any lint or bubbles it looks and feels like it's not even there. Highly recommend from someone who never used screen protectors before.

I bought this for my and the lady’s phones. 3 pack for under $10 is a killing and they’re very nice!

iPhone X Screen Protector Glass (3-Pack), amFilm iPhone X Tempered Glass Screen Protector with Easy Installation Tray for Apple iPhone X / iPhone 10 ( https://www.amazon.com/dp/B074ZNLM9J/ref=cm_sw_r_cp_apip_q9y27qMtaZLrx

iPhone XS/X Screen Protector Glass (3-Pack), amFilm iPhone XS/X Tempered Glass Screen Protector with Easy Installation Tray for Apple iPhone XS, iPhone 10S (3-Pack) https://www.amazon.com/dp/B074ZNLM9J/ref=cm_sw_r_cp_tai_RC9UBbPAAHHZS


Check this out I actually loved this and it looks great. Best part is it has a case to help you apply the protector perfectly ! Edit read this wrong my apologies. This is front.

I got this screen protector and it's perfect.

https://www.amazon.com/gp/product/B074ZNLM9J/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I don’t have that case, but I like these screen protectors:

Spigen iPhone X Screen Protector
https://www.amazon.com/dp/B079H5M5VN/

I use the Spigen Tempered Glass one and it only has one cut and black edges. You can’t even notice it with either of the Apple cases on.

https://www.amazon.ca/dp/B079H5M5VN/ref=cm_sw_r_cp_api_J.U4BbE6VQJXN

Protectors without cutouts also just look way cleaner. Here are some products from amazon:

https://www.amazon.ca/dp/B07G3QC7P6/ref=cm_sw_r_cp_api_i_ek.7Cb9YT5K3Z

https://www.amazon.ca/dp/B079H5M5VN/ref=cm_sw_r_cp_api_i_Om.7Cb0H8SPPJ

https://www.amazon.ca/dp/B07RWXDRLP/ref=cm_sw_r_cp_api_i_kn.7CbY3A0FS9

https://www.amazon.ca/dp/B07RWBFXLR/ref=cm_sw_r_cp_api_i_Op.7Cb71XEAY6

These protectors don’t impact image quality at all, and I personally prefer them as they prevent anything from coming into contact with the glass above the camera directly. That, and I don’t have to worry about dust and other stuff being in those holes for cameras that other protectors use.

This is what I’m using for my 11 pro. Works great and almost invisible.

Spigen Screen Protector

I have two s9+ and this brand works fantastic. Supcase and a caseology case both like otterbox defender and commuter.Amazon link

Been using this:

Galaxy S9 Plus Screen Protector Glass, amFilm 3D Curved Dot Matrix Full Screen Samsung Galaxy S9 PLUS Tempered Glass Screen Protector (6.2") 2018 with Easy Application Tray (NOT S9) (Case Friendly) https://www.amazon.com/dp/B079YC1TRH/ref=cm_sw_r_cp_apa_pncZAb7CXMF1S

Pretty damn happy with it!

I'm using this case, I love it

Samsung Galaxy S9 Plus Cases Covers with Full TPU Soft Edges & Art Cloth and Full-Edge Protection Shock- Absorbing & Great Grip Fully Compatibale for Samsung Galaxy S9 Plus(Black). https://www.amazon.com/dp/B07B459J3H/ref=cm_sw_r_cp_apa_wAd-Bb8C9ECRW

And this is my screen protector, extremely easy to apply and their warranty is great. It cracked once and they sent me a new one with a few days

Galaxy S9 Plus Screen Protector Glass, amFilm 3D Curved Dot Matrix Full Screen Samsung Galaxy S9 Plus Tempered Glass Screen Protector (6.2") 2018 with Easy Application Tray (NOT S9) (Case Friendly) https://www.amazon.com/dp/B079YC1TRH/ref=cm_sw_r_cp_apa_EBd-BbR2YAQZE

I got [this] (https://www.amazon.com/gp/product/B079YC1TRH). It's alright, but it is very reflective. There is a rainbow effect on it which kinda sucks, but it's not that noticeable. A bunch of people have also received their protectors cracked, but you can get a replacement if that does happen. I wouldn't 100% recommend it, but the only reasons why I got it was because it was cheap and that I felt like I needed something more to protect my screen. If you want something with good quality, a bunch of people on here like the Whitestone Dome

So... this is working very well for me with a case.
https://www.amazon.com/gp/product/B079YC1TRH

as far as feel, its been perfect. But, it must be centered perfectly with their alignment frame. When I laid it down and was sure it was centered, I pushed out from the middle to the edges, both left and right. It made the middle sit uniformly and the sides adhere well. You probably don't have many reapplications before the glue gets weak, so be sure before really pushing the edges down. I do have touch input sensitivity increased, but its not really been needed. If the glue fails, techmatte will respond and replace in my experience.

For many years I disdained cases, Manufacturers make beautiful phones and users ugly them up. I rarely dropped a phone, maybe because unlike some people I don't normally walk around holding my phone in my hand. The few times I dropped my HTC phones they didn't break!


Until one did, and I now own a Samsung Galaxy. Beautiful but insanely slippery. Came with a "free" case of a type I NEVER would have imagined using - a bulky, gnarly, "I can take anything" design by Pelican - the "Voyager".

I then ordered this screen:
https://www.amazon.com/gp/product/B079YC1TRH/

I am surprisingly very happy with the combo.

https://www.amazon.com/gp/aw/d/B079YC1TRH/ref=mp_s_a_1_2?ie=UTF8&qid=1521782060&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=galaxy+s9+amfilm&dpPl=1&dpID=51HpxWJzuML&ref=plSrch

Reviews are up and down. I haven't experienced the rainbow effect, but I've only had it for a day.

I bought this one today.
https://www.amazon.com/gp/product/B079YC1TRH/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/Protector-Designed-Coverage-Protection-Tempered/dp/B07FQZ8Y1V/ref=mp_s_a_1_2?ie=UTF8&qid=1540312921&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=tethy+iphone+xr+screen&dpPl=1&dpID=51KSV925IrL&ref=plSrch

This is only for the IPhone Xr

I'v had iphones since the 4S and never used one but have heard that with screens getting harder they are scratching easier. So I got my first one for my Xr and it is pretty nice. I did this one: https://www.amazon.com/gp/product/B07FQZ8Y1V/ref=oh_aui_detailpage_o00_s00 and although it was a little fussy (took me two out of the 3 to get it right) I honestly don't even notice it is there now.

I cannot recommend this one enough. I asked the same question on here a few months back as I was struggling with having a screen protector stay on my watch. I've tried others off of Amazon, and multiple Zagg styles. I've been the happiest with this. You do need to be persistent on getting the edges pushed down when you first apply the screen protector, and you need to let it sit undisturbed overnight.

>https://www.amazon.com/gp/product/B07HNR2JML

Is there a link or video that can possibly show the process?

I enjoy the one's that have a frame to clip over your phone before you put the glass on.

I have been extremely happy with this buy. It works well with my spigen phone case

OMOTON Tempered Glass Screen Protector Compatible with OnePlus 6T 6.41 inch [2 Pack], Not Full Coverage https://www.amazon.com/dp/B07KCTJLF2/ref=cm_sw_r_cp_apa_i_gXnrDbMZXQQXF

Really its the frame that helps centering the glass.

OMOTON Tempered Glass Screen Protector Compatible with OnePlus 6T 6.41 inch [2 Pack], Not Full Coverage https://www.amazon.com/dp/B07KCTJLF2/ref=cm_sw_r_sms_apa_i_WWlzCbZRA9NDY

Got this one from Amazon and so far it's been pretty good. It comes with an alignment tool which is super helpful, and doesn't have that annoying black border that many 6T protectors seem to have

OMOTON Tempered Glass Screen... https://www.amazon.com/dp/B07KCTJLF2?ref=ppx_pop_mob_ap_share

OMOTON Tempered Glass Screen Protector Compatible with OnePlus 6T 6.41 inch [2 Pack], Not Full Coverage https://www.amazon.com/dp/B07KCTJLF2/ref=cm_sw_r_cp_apa_i_FyQ5CbZG3K43E

Yup I saw
OMOTON OMOTON Tempered Glass Screen Protector Compatible with OnePlus 6T 6.41 inch [2 Pack], Not Full Coverage https://www.amazon.in/dp/B07KCTJLF2/ref=cm_sw_r_cp_apa_i_.PQ5CbEPQ91GD

No, I put this one on.

I like the amfilm ultra. Case friendly, great instructions that are easy to follow. My fingerprint scanner works fine. https://www.amazon.com/amFilm-Application-Compatible-UltraSonic-Fingerprint/dp/B07QF3B12P

amFilm Ultra Glass Screen Protector for Galaxy S10 Plus, (2 Pack) UV Gel Application, Tempered Glass, Compatible with UltraSonic Fingerprint Scanner for Galaxy S10 Plus (2019) https://www.amazon.com/dp/B07QF3B12P/ref=cm_sw_r_cp_apa_i_NuVyDbZZBJ2VS


Mine works.

I've tried many different thin screen protectors and glass ones, I really like amFilm https://www.amazon.com/amFilm-Application-Compatible-UltraSonic-Fingerprint/dp/B07QF3B12

edit:fingerprint works like a charm

The Speck Presidio Grip on my P4 XL solves the slippery problem for me 100%. 😍 this case!

https://www.amazon.com/Speck-Presidio-Google-Pixel-Black/dp/B07Z8PTC75/

I paired the case w/ this tempered glass screen protector.

https://www.amazon.com/dp/B07VCJHS76/

I've been using this one for a week and its perfect

https://www.amazon.com/dp/B07VCJHS76/ref=cm_sw_r_sms_apa_i_53SUDbM9BV83T

This one's keeps the sensors uncovered 👍

[4 Pack] OMOTON Google Pixel 4 XL Screen Protector, Tempered Glass Screen Protector for Google Pixel 4XL 2019 Released with/Alignment Frame/Scratch Resistant/Bubble Free https://www.amazon.com/dp/B07VCJHS76/ref=cm_sw_r_cp_apa_i_zH4QDbHGR93YM

>https://www.amazon.com/gp/product/B07VCJHS76/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Thank you! I have a suspicion that my tempered protector that only leaves the light sensor uncovered is the cause of my unlock delay.

I do, but it is this one from Amazon: https://www.amazon.com/gp/product/B07VCJHS76/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

So it doesn't block any of the sensors and my phone is always unlocked as soon as it starts scanning. Not the best screen protector, but it is a 4 pack and works until some better reviews come out.

dbrand skins are amazing. You can barely tell they are even a skin they look like part of the phone. Also, IntelliGLASS HD is an amazing screen protector. They make two sizes. One that fits the maximum space on the screen and another that leaves space for a case.

It doesn't have to be exactly sand. It can be something as simple as dust.

The only one I know of and am currently using is the Orzly one. Beware that there are problems with it though. https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LWSHNC5

It's hard for manufacturers to make good tgsps without that halo'd edge because the glass itself on the pixel is curved on the edges. The only, from what I've seen so far, manufacturer that makes one that covers the whole screen is Orzly.

https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LYQRKMG < Pixel

https://www.amazon.com/Google-Protector-Orzly-Pro-Fit-Tempered/dp/B01LWSHNC5 < Pixel XL

Have you tried the Orzly screen protectors?

https://www.amazon.com/gp/product/B01LYQRKMG/

I've used them when I had my 1+1 and it has saved me from 2 drops. I have the Rhinoshield one right now on my Pixel and it does bother me that there's a mm space on both ends of the screen.

https://www.amazon.com/gp/product/B01BG2EJYS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I am extremely happy with this screen protector on my S7 Edge