(Part 2) Best electrical outlet switches according to redditors

door openers are not cheap.

if you want to open doors that have knobs, you also need to add an electric strike, or electrify the trim... which i've recently learned is what locksmiths call door knobs.

​

here's an opener on amazon, that is about 1/3 the price of a commercial unit.

https://www.amazon.com/Olide-SW100-Electric-Automatic-Operator/dp/B00VJXBCIG/

​

and an electric strike to release w/standard interior knob, this is about 1/3 the price of a commercial unit.

https://www.amazon.com/UHPPOTE-Electric-Strike-Fail-Secure-Control/dp/B00V45GWTI/

​

you will need to provide power for the opener.

depending on the complexity of the controller for the door opener, it may be able to directly control the strike.

​

once you have the opener and the strike, you just need any smart relay to use your phone.

such as, https://www.amazon.com/dp/B078GDFYTY/.

i don't know anything about the different ecosystems, i'm sure apple homekit has a relay as well.

Heatsinks $11
Sonoff switch $14.00
N-Channel MOSFET $8.88
Stickable Breadboard $9.99
LED lights $11.25
Google AIY Voice Kit $12
HDMI $6.99
5V Power Supply $7.99
12V Power Supply $9.99
Raspberry Pi $38
Monitor $69.99
Mirror $129.99

Total : ~$330

2 for $25

https://www.amazon.com/gp/aw/d/B0746G946P?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2

Why you would pay more and splice your own wires is beyond me. Crazy advice in this thread.

I use a hue dimmer switch and this plug. https://www.amazon.com/dp/B07BRSMFP8/ref=cm_sw_r_cp_apa_i_TRQFDb472ZVFW

The plug shows up as a light on the hue bridge. I just labeled it Outdoor String Lights on the Hue app and google home. And set the hue dimmer switch to control it. Works great. Its much nicer than manually plugging and unplugging the string lights every time.

I got a set of these before I went into the hospital (one event is not connected to the other BvD ), and didn't get much time with them. They seem pretty warm and bass-heavy compared to my 2.1 Monsoon flat-panel speakers I've been using for over a decade. Unpleasantly so, but after so many years listening to the electrostatic speakers, perhaps I'm just used to that sound profile now. The Klipsch also seemed to get pretty damn warm when plugged in.

They looked good and weren't too big. And that's the extent of what I know about them.

Edit: I got a wireless remote control electrical outlet switch to make up for its lack of an on/off switch.

[Onvis Smart motion] (https://www.amazon.com/dp/B07KY6747N/ref=cm_sw_r_cp_api_i_htnHDb5AZW23N)

[IDevices Plug] (https://www.amazon.com/dp/B00U31IO3Q?ref=ppx_pop_mob_ap_share)

[Vocolinc Plug] (https://www.amazon.com/dp/B07LDTJZ8R?ref=ppx_pop_mob_ap_share)

You can buy a two pack of the Vocolinc Smartbar for about $30: https://www.amazon.com/VOCOlinc-HomeKit-Assistant-Required-Smartbar/dp/B07LDTJZ8R/ref=sr_1_1?keywords=vocolinc+smartbar&qid=1569811594&sr=8-1

Some stuff:

1. Decent networking gear shouldn't need regular restarts. This is especially true if you keep it on a surge protector and/or UPS.
   
2. You can have multiple wireless access points(wAP or AP) for WiFi (e.g. TP-Link EAP225 or Ubiquiti AC Lite)
   
3. ISP -> Modem -> Router -> Switches/wAPs -> devices; many consumer routers have integrated switches and wAPs, some even have the modem integrated. If anything early in the chain goes down then everything after it will NOT have an internet connection. More often than not consumer grade wireless routers are flaky, which is why the "Ubiquiti EdgeRouter-X + AC Lite" combo suggestion is made on this subreddit - those things just don't need to be reset for months on end (do make sure they're in a surge protector to filter out unclean power that might damage them).
   
   One inexpensive hack to your internet situation (note that tons of hard power cycles are not good for a device but it's a relatively minor issue vs constant dirty power) - you can do a hard power cycle by flipping the controller on/off.
   https://www.amazon.com/Century-Wireless-Electrical-Household-Appliances/dp/B01NASZ0UM/

Just bought these when they were on sale for $3 and they worked great:

https://www.amazon.com/gp/product/B07LGSBFNJ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

See:

https://www.reddit.com/r/homeassistant/comments/dhtf5e/wifi_smart_plugs_with_energy_monitoring_16a_up_to/

Electrical tape. Permanent marker. there are also wireless plus switches on amazon.

Like this.

I'd go low tech with this.

Get a plug in appliance control module. Something like this (but whichever one will work with your system; if you have no smart hub get a mechanical timer like this one).

Wire the 24vac transformer that feeds your doorbell in through it.

Result- doorbell does nothing for the hours you specify, for under $50.

Alternatively, get a double pole relay and a small interval timer. During the day, pushing the doorbell rings the chime. During the night, pushing the doorbell opens an electronic valve that feeds a sprinkler head pointed at your front door for several seconds. If drunk college students are ringing your doorbell at night, they will quickly learn not to.

A heater/air vent in each bathroom. My buddy put one in his bathroom and it's really cool to just stand there for a minute and let your hair dry completely.

I'd wire everything to connect to a smart home so you can control it from your phone or with voice commands. Check out these wifi switch packs. https://www.amazon.com/Sonoff-Electrical-Household-Appliances-Compatible/dp/B0773DFQJ9/ I'm working on this now in my remodel.

Outlets with both regular three prong plugs, and USB fast chargers.

Dimmer switches on every light. Also smarthome controllable.

A saferoom for any apocalypse scenarios, but make sure your local fire department knows about it so if you're every trapped in there they know where to look.

Wifi cameras to watch the outside because eventually someone's going to do something stupid to your property.

Two wall ovens. I always wanted two.

​

These definitely exist. I used to have some but I totally forget what brand they were. Should be easy to find on google.

Edit: after 10 seconds on google: Century Wireless Remote Control Electrical Outlet Switch for Household Appliances (3 Pack) https://www.amazon.com/dp/B01NASZ0UM/ref=cm_sw_r_cp_api_i_Clk1BbFSSV02D

What everybody else has said - wireless light switch. I bought one just a couple weeks ago for some LED strips. Originally it likely had the receiver end which plugged into an outlet and was what you plugged whatever electrical appliance into.

https://smile.amazon.com/Dewenwils-Wireless-Control-Electrical-Interference/dp/B07DT9QP8P?crid=14APMF1PANUQW&keywords=wireless+light+switch&qid=1540643851&sprefix=wireless+light+%2Caps%2C273&sr=8-11&ref=sr_1_11

There are also some which the receiver is a standard light socket base instead.

https://smile.amazon.com/Wireless-Remote-Control-Switch-Fixtures/dp/B016N7VNJ0?crid=14APMF1PANUQW&keywords=wireless+light+switch&qid=1540643948&sprefix=wireless+light+%2Caps%2C273&sr=8-9&ref=sr_1_9

There are power supplies you can get that come with a power button on the cord. I have personally had bad luck with those, resulting in low voltage warnings despite having a properly sized power supply. If you put a switch before the power supply you don’t have to worry about any of that.

Here are a couple of options that would accomplish this:

GE Grounded On/Off Power Switch, Plug-In, White, Energy Efficient, Space Saving Design, UL Listed, 15A, 120VAC, 1800W, 25511 https://www.amazon.com/dp/B0113VTPSW/ref=cm_sw_r_cp_api_USbaCb1YJNQ9Z

Master Electrician 6-Feet Indoor Extension Cord with 3 Outlets and On/Off Switch , Black https://www.amazon.com/dp/B000W65LO2/ref=cm_sw_r_cp_api_7VbaCb9Q114BB

There are a few options. They range from basic wireless plugin switches to full wifi varieties.

Basic: https://www.amazon.com/dp/B01N23GRYD/ref=dp_prsubs_1

Advanced: https://www.homedepot.com/b/Smart-Home-Smart-Lighting-Smart-Plugs/Z-Wave/N-5yc1vZc7ciZ1z0kb2t

I agree with you that "Yet another Pi" or "Yet another arduino" is getting rather old. I'm also not a fan of using someone else's cloud to control my house.

There is replacement firmware for the Sonoff https://www.amazon.com/Sonoff-Remote-Control-Compatible-Android/dp/B078GDFYTY here https://github.com/arendst/Sonoff-Tasmota My only problem right now with the Sonoff is the low current values of the relays. I like how it has the AC-DC converter and the wifi all in one.

This guy here https://www.youtube.com/channel/UC2gyzKcHbYfqoXA5xbyGXtQ has a bunch of videos about this stuff.

I'm pretty old school, about 80 / 20 Insteon in-wall switches and Insteon outlets, being controlled with Misterhouse.

I am looking to expand my system, and I'll be using a combination of ESP8266 and ESP32 to do things like garage door sensors and garage door button pressing. I also intend to use the capacitive switch pins on the ESP32 to keep my end users from turning off the floor lamps.

I use sonoff switches, have had extremely good luck with them. The sonoff basic is made to be wired inline. I just take and make a small pig tail out of an extension cord instead of cutting cords on lamps and fans. I currently have 7 of them running thru out my house.

They work with assistant and ifttt. They are inexpensive also. You can get a 3 pack off Amazon for $21.90.
sonoff 3 pack

Plus they are fun to play with. Pisses my wife off when I shut the lights off on her when I’m at work lol.

I've used theseon lamps. They work well enough with the stock firmware, but are wifi. They are extremely hackable too.

If I understand correctly, you're looking for outlets with the usual US shape and voltage (NEMA 5-15 etc.) but with a switch that controls power to each socket.

The closest thing I've seen are single switch/outlet pairs like this one, where the switch can be wired to control a separate circuit or the attached outlet. I've never seen units with two sockets and switch for each one, though I suppose you could just mount two of these side-by-side.

Another alternative would be a power-strip. I've seen several models that have a separate switch for each outlet in the strip, if that's your main goal. There's also inline switch/socket units that might meet your needs.

Log into the Apex dashboard and drag the slider to "off." /s

(Kidding, an Apex would probably be overkill for a tank of that size)

For water changes I have some little remote control plugs that work really, really well. THIS is the one I use.

You could get one of these to do it iHome Smart Plug, Wi-Fi, Works with Amazon Alexa https://www.amazon.com/dp/B010ACFEI0/ref=cm_sw_r_cp_api_WY4EybYNY115N

But honestly, I think you should get a wink hub 2 if you can and use Ethernet instead of wifi.

What's your hub? Sonoff stuff is super cheap if your hub can control it: https://www.amazon.com/dp/B075CC9J2W/

I'd guess that you should definitely leave the Battery out of this one, as if they DO light up, they are above the Batteries 2A max, so the battery could well be overheating. Is it a LiPo/LiIon?
pulling a cable through the wall would be one possibility, the other being just chipping a small piece out of the edge of the door (unless you have an airtight/metal door)

You have the RC in Serial to the LEDS, not in Parallel, right? What make/type is your (apparently RC?) LED controller?

wouldn't it be simpler to use this sort of thing? You can usually get them pretty cheap, and if you want a bigger button you could hack it?
https://www.amazon.com/JTD-Auto-programmable-Electrical-Household-Appliances/dp/B013F9JJ72/

Let's look at what you need here. Obviously a wifi capable board. Enough processor and such to handle simple commands, it has to be able to talk to your app, and run the wifi stack. A relay (I am going to assume 110V)

I'm not much into circuit design, I like to paste together off the shelf stuff, so I would go with a raspberry pi (with 8 IO ports) and something like this for the relay.

Or something like this and you don't even have to write the app.

If you just want to control the power to devices from anywhere, then this would work fine. They are super easy. Takes like 5 min to set up hardware and software. There is a free app that allows you to control it. If you have Alexa or google home then they will also control them.

Here you go: iHome Smart Plug, Wi-Fi, Works with Amazon Alexa https://www.amazon.com/dp/B010ACFEI0/ref=cm_sw_r_cp_api_BzNAybE0Q6C9X - at my local Home Depot they're $29.99 each.

Get one of these ... OMOTON [2 Pack] Mini Wifi Smart Plug compatible with Amazon Alexa,Google Home, IFTTT, 15A Wireless Socket Outlet Remotely Controls your Devices from anywhere,No Hub Required(Android/IOS) https://www.amazon.com/dp/B0746G946P/ref=cm_sw_r_cp_apa_tT9UBbD5KV8XF

If you're comfortable splicing some electrical wires, look into the Sonoff smart switches. They're relatively cheap (~$6) and great for controlling lights/small low current electronics. https://www.amazon.com/Sonoff-Electrical-Household-Appliances-Compatible/dp/B0773DFQJ9

Yup it is. Its also pretty easy and cheap. Just get a sonoff rf bridge, and some rf switches or plugs.
With the sonoff rf bridge you can just "learn" the rf codes, and combine that with alexa, and now alexa can control the rf plugs/rf switches.

Pro: cheap. very reliable. If internet/wifi is gone, you can still control the plugs with an rf remote.
contra: theyre oneway, so you dont get any information back from the plugs. (like power usage, running time, whatever)

Sonoff rf bridge:
https://www.amazon.com/SONOFF-Wireless-Controllers-Automationb-Compatible/dp/B07CWTT8R1

RF Outlet Plugs (you can get anything that works with 433mhz):
https://www.amazon.com/Century-Wireless-Electrical-Household-Appliances/dp/B01N23GRYD/

But sonoff has also wifi outlet plugs, ao you need no bridge:
https://www.amazon.com/Sonoff-Wireless-control-Compatible-Anywhere/dp/B07DDGVC7B/ref=mp_s_a_1_26?ie=UTF8&qid=1541506877&sr=8-26&pi=AC_SX236_SY340_QL65&keywords=sonoff+wifi

And the famous sonoff wifi switches, which you can connect directly to appliances, such as an 3D-Printer. Or a lamp. ;-) Also dont need a bridge.
https://www.amazon.com/Sonoff-Remote-Control-Compatible-Android/dp/B078GDFYTY/

I for myself have like 50 rf plugs and switches at home since ages, and as alexa moved into the home 2 years ago, the sonoff rf bridge moved with alexa into the house, and is since then controlling everything in the house. ;-)

Menards has them in there stores but not online. I ordered three online and they shipped smart+ but was able to find lightify versions in 2 different stores.

Also there is this.
https://www.amazon.com/dp/B07BRSMFP8/ref=cm_sw_r_cp_awdb_t1_F3B3Bb60CNZGJ

I just did this a couple weeks ago. Took it off and put this https://www.amazon.com/dp/B00ZYLTJ16/ . Wifi, not Z Wave. Just downloaded the app and set the timers.

Interesting choice of words though... it's a timer, it's already automated. You set the pins and it turns on and off accordingly, set and forget. You just don't have remote control, which technically is the opposite of automation.

Edit, because I juat saw your other comment about wanting Alexa or Smartthings control. There are ZWave boxes like this. But honestly so far the only reason I've seen you give is to tie the timing to sunset. If that's it I think it may not be worth it for you to not stick with what works, as sunset doesn't change much every day. I replaced mine because the timer stopped working, plus I wanted more complex schedules and I often turn the pump on or off on demand, from out on the deck away from this box.

In the past I had assumed I'd be buying ZWave too, but nowadays I've come to not put that much trust in Smartthings and Zwave. Wifi seems to be the future.

Here’s a dual voltage (120/240/277V) WiOn smart “switch”.

Sonoff?


edit: see: https://www.reddit.com/r/HomeKit/comments/7pxcsv/custom_firmware_now_allows_the_sonoff_basic_to_be/

SmartThings Version 3 Hub (I have the Version 2 Hub...you will have to look around for this one):
https://www.amazon.com/Samsung-SmartThings-Generation-GP-U999SJVLGDA-Automation/dp/B07FJGGWJL/ref=sr_1_1_sspa?ie=UTF8&qid=1540989501&sr=8-1-spons&keywords=smartthings+hub+2nd+generation&psc=1

GE Z-Wave Plus On/Off Light Switch:
https://www.amazon.com/GE-Repeater-Required-Works-SmartThings-14291/dp/B01M1AHC3R/ref=sr_1_3?ie=UTF8&qid=1540989582&sr=8-3&keywords=z-wave+switch

GE Z-Wave Plus Dimmer Switch:
https://www.amazon.com/GE-Repeater-Required-Works-SmartThings-14291/dp/B07361Y54Z/ref=sr_1_3?ie=UTF8&qid=1540989582&sr=8-3&keywords=z-wave%2Bswitch&th=1

GE Add On Switch (if you have a 3-way or 4-way switch):
https://www.amazon.com/GE-Bluetooth-Wireless-STANDALONE-12723/dp/B00RKJS8MQ/ref=sr_1_3?ie=UTF8&qid=1540989718&sr=8-3&keywords=z-wave+add+on+switch

ZigBee Motion Sensors:
https://www.amazon.com/gp/product/B07F8ZHBLS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

ZigBee Door Sensors:
https://www.amazon.com/gp/product/B07F956F3B/ref=oh_aui_detailpage_o01_s00?ie=UTF8&th=1

ZigBee Leak Sensors:
https://www.amazon.com/gp/product/B07F951JDP/ref=oh_aui_detailpage_o01_s00?ie=UTF8&th=1

ZigBee Outlet Plug (you will need to replicate your ZigBee mesh, I use to motion activate lamps, turn lamps on/off at sunset/sunrise, etc.):
https://www.amazon.com/gp/product/B07F96JB63/ref=oh_aui_detailpage_o01_s00?ie=UTF8&th=1

Z-Wave Thermostat:
https://www.amazon.com/gp/product/B005EJ7YO2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

ZigBee RGB Landscape RGB LED Strips:
https://www.amazon.com/gp/product/B00R1PB2ZY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

ZigBee RGB Lightbulbs:
https://www.amazon.com/gp/product/B073ZBYXKQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Z-Wave Deadbolt:
https://www.amazon.com/Kwikset-SmartCode-Electronic-SmartThings-featuring/dp/B004F1B24I/ref=sr_1_12?s=hi&ie=UTF8&qid=1540990126&sr=1-12&keywords=z-wave+lock

Z-Wave Garage Door Opener:
https://www.amazon.com/GoControl-Linear-GD00Z-4-Z-Wave-Controller/dp/B00M75TEIU/ref=sr_1_4?s=hi&ie=UTF8&qid=1540990160&sr=1-4&keywords=z-wave+garage+door+opener

Sonos One Speakers (Great music, and talking through SmartThings):
https://www.amazon.com/gp/product/B074XN1LH3/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Amazon Echo Show (for Voice Control...an Echo Dot will work just fine too):
https://www.amazon.com/All-new-Echo-Show-2nd-Gen/dp/B077SXWSRP/ref=sr_1_1?s=electronics&ie=UTF8&qid=1540990254&sr=1-1&keywords=echo+show

That's about all I can think of at the moment.

If you are going to do this, do it in stages. Z-Wave and ZigBee are mesh networks...meaning that the reliability of the network gets much better the more devices you have. Also, with these mesh networks:

• Battery operated devices DO NOT reinforce the mesh
  
• The only devices that reinforce the mesh are devices that are always powered from the mains
  
  I see so many people complaining about how the Z-Wave or ZigBee devices don't work, when they are relying on too many battery operated devices.
  
  For Z-Wave devices, choose Z-Wave Plus over Z-Wave...it's the newest standard, and has much better range.
  
  In the US, Z-Wave operates in the 900 MHz spectrum and ZigBee in the 2.4 GHz spectrum. Personally, I "prefer" Z-Wave devices as there is a lot of "junk" in the 2.4 GHz spectrum right now. However, the ZigBee devices are operating reliably as I have a strong mesh setup (with non-battery operated devices).
  
  Two great application for the Leak Sensors:
  
  
• Near your hot water heater (when they go, they always leak)
  
• Under your A/C drip pan (if you have central air)
  
  Great applications for door open/close sensors:
  
  
• Turn closet lights on/off when the door opens or closes
  
• Turn on entry and hallway lights when an entry door opens, but only when it's dark (30 minutes before sunset or after sunrise)...turn off 1 minute later
  
• Notify me when my gun safe is opened
  
  Great Application for Motion Sensors
  
  
• Turn on outside ceiling fans (but only if the temp is above 72 degrees)
  
• Turn on lamps while motion is active when it's dark
  
  The motion sensors I linked above are the new ones...the magnetically mount. What's cool is that the magnet is in the sensor, and it's strong enough to attach the sensor to a dry wall screw (no need to mount the adapter bracket).

Nice! I got this one from Ankuoo that I use with my Gaggia Classic that has similar features.

These might work better for some.

Any machine can do that, with this: https://www.amazon.com/Ankuoo-Smart-Plug-Wi-Fi-White/dp/B00NAX2GVU

some machines will not turn on with a timer, but most hx or dual boilers will. Check your model first.

You could get something like this and have a remote to turn the lights on and off.

https://www.amazon.com/Wireless-Fosmon-Electrical-Weatherproof-Included/dp/B072F9DGRL

I'm using Sonoff basic's flashed with Tasmota. This overwrites the crapware that they ship with, enabling MQTT and offer the option to emulate Belkin WeMo as well as Philip's Hue, which I think should work with Home.

Using MQTT, the modules are very quick, I'd guess less than 500ms.

The basic modules have one extra pin that can be used as a generic digital input, connecting to temp/hum sensors, IR diodes, etc.

These are the plugs (Smart Plug Compatible With Alexa, Echo, Google Home and IFTTT, FREECUBE Smart Socket Remote Control Your Home Appliances from Anywhere 16A 2 Pack https://www.amazon.com/dp/B07LGSBFNJ/ref=cm_sw_r_cp_api_i_KKdTDb0P3HFEW) same exact feature set. The power monitoring was actually closer to actual on these before calibration. The Zoozee were way off.

Here’s the guide I used. You don’t replace your original file with third party, you add the third party as an option. When flashing use third party instead of original.


https://github.com/kueblc/tuya-convert/blob/master/README.md

Something like this should solve your issue: https://www.amazon.com/Century-Wireless-Electrical-Household-Appliances/dp/B01NASZ0UM/

​

Wireless (RF) remote to hard power reset just the outlet that has the network infra plugged into it.

may be you are looking for something like this

https://www.amazon.com/Etekcity-Household-Appliances-Unlimited-Connections/dp/B00DQ2KGNK/

https://www.amazon.com/JTD-Auto-programmable-Electrical-Household-Appliances/dp/B013F9JJ72

It is US though and it smart plug.

Amazon offers these wired in line switches. They're good for 10 amps. Similar switches sold by others on Amazon.

Agoal Sonoff Wifi Switch Wireless Remote Control Electrical for Household Appliances,Compatible with Alexa DIY Your Home Via Iphone Android App 2-Pack https://www.amazon.com/dp/B074N22WFT/ref=cm_sw_r_cp_apa_i_OCE8AbW7FDE9Y

Just wanted to chip in about the cheap ones that you mentioned. I picked up a 3 pack of these for $30. I will say, they will satisfy all of your needs. I use the app to schedule, my wife can press a physical button on them, the app on my iphone works well, and I am able to use Alexa/Google Home to control them.

I have had 2 issues with them:

-Once in a while (not more than once a month) I need to unplug one of them and plug it back in because it loses wifi connectivity

-Can't use it with IFTTT or Stringify. This limits my automations to the scheduler within the app, and I can't create more advanced routines using location/other things.

Overall, they were worth the money for my needs (turning on/off some Christmas lights), but if you want to get more advanced or have something 10000% reliable you should spend the extra $.

I'm using cheap 4" Sewer pipe, the thinner lighter pvc piping along with Whye and 45deg elbows. Picked them up at Lowes because they had the brighter white pipe compared to the sun-tinted stuff they had at HD. Since i was simply hanging them from the ceiling, i wanted them to look "nice".


Few things i'm doing which i'm not sure is fully necessary...

1. Once cut and ready to assemble (i went one piece at a time, slowly measuring along the way) i lightly wax the inside of the pipes to keep things flowing nicely. No joinery, just pressed to fit by hand which allows me to expand easily like i did for this 3rd drop. I just wax as far as my arm can reach, not really worrying too much on the longer pipes.
   
2. I have simple plastic blast gates... https://www.amazon.com/gp/product/B005VRPQ92
   
3. Remote controlling the DC via https://www.amazon.com/gp/product/B072F9DGRL
   
4. All of my drops have these quick-connectors.. https://www.amazon.com/gp/product/B009AY5ET4 . On the hose side i use their male connector https://www.amazon.com/gp/product/B009AY5E94
   
5. Since i installed a 4" piping and such, i reduce to 2.5" just after the blast gate/quick-connector... https://www.amazon.com/gp/product/B002DSDSY2
   
6. Then extremely flexible 2.5" hose to the dust boot... https://www.amazon.com/gp/product/B01M35BE8D
   
7. Lastly into the SuckIt dust boot... https://www.suckitdustboot.com/product-page/suckit-dust-boot-for-shapeoko-3-xl-and-xxl?categoryId=7b98942b-ae43-e2ff-7e50-014f08c9ff6b
   
   1-5 work perfectly with my other tools... miter saw, table saw, router table, etc... Since i don't have it yet, i can't attest to how well all this will work the SO3 (:fingerscrossed:).

Bought these OMOTON brand ones off amazon. Never heard of the brand, so I took a bet on these hoping they'd work with my google home, and lo and behold, i was surprised they actually work pretty well. Have to go through their app to add them to your list of devices, but aside from that, fairly well designed app, and good response.

Go for these 2 pack of 16A (instead of the 10A linked above) with Power Monitoring for $11.99 - 10% clip coupon - 50% coupon code 3A6NB97H = ~$3 per plug with tax. I bought 5 packs (10 plugs) for $30.87.

And yes the current Tuya-convert works fine on them to get them off the cloud. I'm using ESPHome.

These one's are really cheap and were pretty dang easy to use tuya convert on. Somebody actually posted a coupon for them not too long ago. Came out to about $3.5 a pop

The sensors don't need to be in range of the hub - they need to be in range of any mains-powered Z-Wave device. Z-Wave is a mesh system, and all plugged-in or wired devices act as repeaters. Z-Wave radio range is 100 meters over open air, but 20 feet or less with dense or metallic construction.

Plug in a lamp module midway between sensor and hub and add it to your network. That might fix things. Generally, the more wired Z-Wave devices you have, the better everything works.

I have an LTE hotspot and reception isn't an issue in my hangar, will probably go with a WiFi switch: http://amzn.com/B00NAX2GVU. Then hook up all my other WiFi enabled stuff to it... not sure how the hotspot will stay connected 24/7 but we'll see.

You could plug your PS4 into one of these.

https://www.amazon.com/dp/B0113VTPSW/ref=cm_sw_r_sms_awdb_t1_wedIAbA73V885

You'd be able to kill power to it completely while PC gaming.

FWIW, I have a few Tuya plugs, and I've had no issue with the smart life app/integration at all, and I use GH with them several times a day... but, obviously, ymmv.


as a 'cheap' replacement, maybe look at the sonoff wifi switches, but you'll need to do a little snip snip with an electrical cable https://www.amazon.com/Sonoff-Remote-Control-Compatible-Android/dp/B078GDFYTY

If they're for plug in type lamps I've had good luck with this plug. I've got 2 and they just synch right with my bridge. No dimming option but they come on/off via the app just fine

Smart Plug Socket for Smart Home Automation Compatible with Echo Plus and Standard Bridge Hub Needed for Amazon Alexa and Google Assistant Voice Control https://www.amazon.com/dp/B07BRSMFP8/ref=cm_sw_r_cp_apa_i_q-VyDb8C1SCZN

which one do you have? I heard the old did but the 2018 does not. This is the 2018 - https://www.amazon.com/Samsung-SmartThings-Outlet-GP-U999SJVLDAA-Smart/dp/B07F96JB63/ref=sr_1_8?keywords=samsung+smartthings+plug&qid=1565648213&s=gateway&sr=8-8

The WiOn Outdoor WiFi box. It's got an ESP8266 so it can be flashed with Tasmota or your choice of firmware instead of using the crappy WiOn app. (does require soldering but you can find the pinouts online). It's less than 1/2 the price of the GE Z-Wave box. I've got two of them, one for my pool pump and one for the sprinkler pump.

Looks like Amazon is sold out now but it was ~$60 last month.

https://www.amazon.com/WiOn-50054-Outdoor-Wireless-Switch/dp/B00ZYLTJ16/ref=sr_1_6

Cool stuff. Thanks! Did a quick research. My findings:

• Sonoff smart switches on Amazon: https://amazon.com/dp/B074N22WFT - 8x switch for $51 - that's only $7/pc!
  
• reddit confirms
  
• some custom firmwares
  
  • https://github.com/KmanOz/KmanSonoff
    
  • https://github.com/arendst/Sonoff-Tasmota)
    
• guide on tricking Sonoff into connecting to a local server instead of cloud without flashing - https://blog.ipsumdomus.com/x-1b2d6632c01
  

Nah, skip all that. Do a wifi switch (~$30) and then just write a python script that triggers the OEM software for it.

For someone who doesn't know anything about hardware/software, a pre-built solution would work better than trying to piece together an arduino stackup from some tutorials.

Here's a 3-pack for $20, they're only good for 10a though, so I'd be leery using them with a heater.

>Sonoff 4ch relay module

Cool thanks.

Something like this:

https://www.amazon.com/Sonoff-Electrical-Household-Appliances-Compatible/dp/B0773DFQJ9/ref=pd_sbs_60_t_1/146-3964738-5196644?_encoding=UTF8&pd_rd_i=B0773DFQJ9&pd_rd_r=62da1566-83b3-4d42-b860-1cb6a22acb7a&pd_rd_w=lYC42&pd_rd_wg=ruklu&pf_rd_p=5cfcfe89-300f-47d2-b1ad-a4e27203a02a&pf_rd_r=T04XN1S1FTQ6TSFZT8AF&psc=1&refRID=T04XN1S1FTQ6TSFZT8AF

That would solve Alexa being able to control it.

Is that relay able to be seen by Wink?

Just so I'm clear:

> connect each relay to legs of a button

Am I hard wiring to the remote?

there’s many!

Etekcity Remote Control Outlet Kit Wireless Light Switch for Household Appliances, Unlimited Connections, Up to 100 ft. Range, FCC Certified, ETL Listed, White (Learning Code, 5Rx-2Tx) https://www.amazon.com/dp/B00DQELHBS/ref=cm_sw_r_cp_api_i_QxEDDbQ2E9H2J

Wireless Remote Control Outlet, Kasonic Smart Home Remote Control Multi Purpose Combo Set [3 Electrical Outlets + 1 Remote] Perfect for Household Appliances and Devices; ETL-Listed https://www.amazon.com/dp/B07BH5S222/ref=cm_sw_r_cp_api_i_FyEDDbS64CY6X

DEWENWILS Wireless Wall Control Outlet, Electrical Remote On Off Light Switch for Lamp, No Interference, 15 AMP Heavy Duty, 100' RF Range, Compact Side Plug, White https://www.amazon.com/dp/B07DT9QP8P/ref=cm_sw_r_cp_api_i_ozEDDbJQH2TZ8

Mine was cheaper because I bought my hub and a bunch of sensors as a kit, used.

But, something like this mulitpurpose sensor and this smart outlet.

I have all of my automations run through webcore so that's what I used.

I don't use them myself (since I have the Hook). The Sam's Clubs near me have a 2 pack of the iHome plugs for $50. Amazon is currently flooded with these wifi outlets. They're being listed under many different brand names, but they all look alike and are priced ~$20. I've heard good things about the TP Link plugs too...those are very popular.

Like this?

Well if your bedside table just plugs into the wall you could get one of these.

http://www.amazon.com/iHome-Smart-Apple-HomeKit-Amazon/dp/B010ACFEI0/ref=sr_1_1?s=hi&ie=UTF8&qid=1458751940&sr=1-1&keywords=ihome+smart+plug

I would only bother with a switch for a hardwired fixture that I could not get a smart bulb for.

It may be worthwhile to take a look into consumer options for the tvs and small devices.

Ankuoo NEO Smart Plug, Wi-Fi, White https://www.amazon.com/dp/B00NAX2GVU/ref=cm_sw_r_cp_api_sZ4QybZ6RWDQ8

Wemo also has a few other options.

These are minimal install/config once you connect them on the network. Though they can also grow legs and walk off easily.

Hey something I use all the time are my plugins that have a remote! In the basement I lived in, I used Christmas lights (bought half off after the holiday) plugged into the remote plugs and i loved it!

Here's an example:
https://www.amazon.com/dp/B01NASZ0UM/ref=cm_sw_r_cp_awdb_t1_jXxSBbNEGF3XA

Thank you for the reply, after doing some research yesterday I came to the same conclusion. I would think that an app or phone could bridge the divide between two smart devices but i guess we aren't there yet.

I ended up going with one of these:
https://www.amazon.com/dp/B072F9DGRL/?coliid=IR8E466WS784J&colid=2NZBR3EQDND0I&psc=0&ref_=lv_ov_lig_dp_it

I don't really need the extra ability to control via my phone although it would be nice. Also I wish this thing had a physical button on the outlet itself in-case of remote failure or dead batteries but at that point I can just bypass it and go straight to the wall.

You might want to mention your country. There are literally many products like these: https://www.amazon.com/dp/B07313TH7B/ref=cm_sw_r_sms_c_api_Cdh2Bb1JSTE9X which do have start and end time functionality via the associated phone app, but no clue if these work out for wherever on the planet you happen to be....

Got it. I don't know if you can use a switch to control a smart plug without having a hub. If you have a voice assistant (e.g. Alexa, Google) there are plenty of smart plugs you could use, but it sounds like you want a physical switch on the wall (and I don't blame you).

So I guess you're stuck with either getting a hub, or the modern 'clapper equivalent' as mentioned below. There are tons available. Can't speak to this one, just the first that came up in a search.

If you’re not wanting to add app/Siri/amazon control of the lamp, they make options that are far cheaper.

Wireless Wall Switch Remote Control Outlet https://www.amazon.com/dp/B07DT9QP8P/ref=cm_sw_r_cp_api_i_09kDCbNE404GX

Look here.

https://www.amazon.com/WiOn-Outdoor-Wireless-Switch-50054/dp/B00ZYLTJ16

Just looks like it's for stuff like pool pumps or fans or other stuff that's not strictly a smart outlet. I've heard of Wion before and they make smart outlets.

https://www.amazon.com/KMC-Monitoring-Compatible-Required-Function/dp/B07313TH7B/ref=sr_1_2?m=A1BRJKB12CAV7X&s=merchant-items&ie=UTF8&qid=1537859659&sr=1-2

For WiFi, I would use this WiOn unit, for z-wave, this GE unit

I just flashed 4 of these smart plugs with Tuya-convert. The Tasmota firmware shows the power monitoring and it integrated easily into home assistant. I didn’t have to open/modify the smart plugs. Just powered them and flashed them over WiFi.


Smart Plug Compatible With Alexa, Echo, Google Home and IFTTT, FREECUBE Smart Socket Remote Control Your Home Appliances from Anywhere 16A 2 Pack https://www.amazon.com/dp/B07LGSBFNJ/ref=cm_sw_r_cp_api_i_Iq8XDbZ5D5WZG

I have a lot of different Smart outlets being used around the home. It really depends on what your use is going to be.

For a cheap outlet where space is not an issues, these from KMC have worked well for me. They are pretty dependable even in areas with weak WiFi signal and the energy monitoring is nice for things like air filters or fans.

KMC also makes a nice multi outlet plug. I personally use this to control the multiple led light strips at my garage workbench.

For anything 15A, I would say TP-Link is the way to go. These have been great for me, but the newer HS105 does have a better form factor. I have used these for my garage fridge, windows AC unit, and tools at my workbench. There is an energy monitoring variant as well, the HS110

You may see that there are a ton of the cheap round shaped smart plugs on Amazon and other sites. I have found all of these to be almost exactly the same, no matter what company they come from. They work well enough for simple devices like lamps, but they have tended to have issues in anywhere, but perfect WiFi signal areas.

Let me know if you have any questions on this or any other devices. After a few years of upgrades, I am at over 110 smart devices, so I can tell you what not to get...

https://smile.amazon.com/dp/B0773DFQJ9?colid=&coliid=I39TKYUXCPBPCB&ref_= no hub required

I think this would work

My first HomeKit product was an iHome SmartPlug. I initially purchased it out of curiosity, and now I can't believe I ever lived without it. I've plugged in my bedroom lamp to it and the convenience is amazing. At night, when I'm ready to go to bed I simply tell Siri "Good night" on my watch and she turns off the lamp. In the morning it turns on automatically about half an hour before I want to wake up, helping me wake up.

If you can think of one situation where having something plugged into HomeKit would be even slightly more convenient, I'd recommend trying out the SmartPlug. It's cheap (The Home Depot near me had them on sale for $30) and it's an easy way to test out HomeKit without committing a lot of money.

Edit: Links

Amazon: http://www.amazon.com/iHome-Control-featuring-Compatibility-ISP5WW4TC/dp/B010ACFEI0/ref=sr_1_1?ie=UTF8&qid=1452295158&sr=8-1&keywords=IHome+smart+plug

Home Depot: http://www.homedepot.com/p/iHome-SmartPlug-iSP55WWTC/206450167

I really hate to make excuses for your poor experiences with the dock, buuuuut, if that's your solution, you might as well invest in one of these GE Grounded On/Off Power Switch, Plug-In, White, Energy Efficient, Space Saving Design, UL Listed, 15A, 120VAC, 1800W, 25511 https://www.amazon.com/dp/B0113VTPSW/ref=cm_sw_r_cp_api_mO.Kzb7Y36DC0

Not sure but I personally use the KMC brand ones. I also have a couple TpLink but prefer the others due to the app and being able to see more information such as energy used and a better time frame / graph. The TP link basically just showed hours on last I checked.

Below is a link to a 3 pack, currently about 22 bucks



KMC 3 Pack Wi-Fi Smart Plug with Energy Monitoring, Compatible with Amazon Alexa Google Home, No Hub Required, Remote Control Outlet with Timing Function, ETL Listed https://www.amazon.com/dp/B07313TH7B/ref=cm_sw_r_cp_apa_i_8Wl4DbPS7SC38

>smartthings zigbee outlets

This one? https://www.amazon.com/Samsung-SmartThings-Outlet-GP-U999SJVLDAA-Smart/dp/B07F96JB63

I use these in my studios:

BN-LINK Wireless Remote Control Electrical Outlet Switch for Lights, Fans, Christmas Lights, Small Appliance, Long Range White (Learning Code, 3Rx-1Tx) 1200W/10A https://www.amazon.com/dp/B01NASZ0UM/ref=cm_sw_r_cp_tai_9viTDbBGWT0ZS

I’m really not a fan of having everything in my house rely on internet connectivity. My internet is pretty good but it goes down more often than the power does. Its already inconvenient when it happens, no reason to make it more so.

You missed the new VOCOlinc SmartBar smart plugs.

They have the higher 1800W and have the skinny design like iDevices and WeMo, Wi-Fi, but are only $20.

I am not sure of what they do after a power failure though...(but their old model remembers the state)

I got one of these remote power switches: https://smile.amazon.com/gp/aw/d/B013F9JJ72/ref=mp_s_a_1_5?ie=UTF8&qid=1509643165&sr=8-5&pi=AC_SX236_SY340_FMwebp_QL65&keywords=remote+power+switch&dpPl=1&dpID=31Uk3ULDU4L&ref=plSrch

Vocolinc smart bar: https://www.amazon.com/gp/product/B07LDTJZ8R/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1

supports devices up to 1800 watts.
https://reddit.com/r/HomeKit/comments/aklk9c/review_vocolinc_smartbar_smart_outlet/

Any experience with this?

https://smile.amazon.com/gp/product/B07BRSMFP8?pf_rd_p=c2945051-950f-485c-b4df-15aac5223b10&pf_rd_r=BA5FK6XRNCJHYNNT7WPQ

May need to get another app activated on off switch to go in line. http://www.amazon.com/gp/aw/d/B00NAX2GVU/ref=mp_s_a_1_1?qid=1459362618&sr=8-1&pi=SY200_QL40&keywords=wifi+power+outlet&dpPl=1&dpID=313N2yxNvcL&ref=plSrch

I was having the same issue. My zWave devices were all battery powered, same with the Zigbee, so they wouldn't work as repeaters. I purchased a couple zWave repeaters and a couple of the ST Zigbee plugs, and put them in my weak areas, rebuilt the networks and it solved my issues.

I bought these a while back which also use Tuya, and I was able to open them semi-ok (they were glued), but they have a ESP8266 inside. I reprogrammed them with ESPurna and they work great. However I had to create a new model in ESPurna, based it off of the Maxcio W-US002S, but without the S since that is for power monitoring. The GPIO pins were a little different, so I had to do some reverse engineering there. And just applied a little superglue around the rim to seal it back up.

tengo este sonoff que me permite manejar 3 luces (living, porche y una de adelante), aparte compré estos otros switches para meter en lámparas / ventiladores, etc.

Thanks! I don't mind if the settings stay the same. I want to setup something for an elderly relative that can act as a kill switch and on switch

A version of this but for a matching plug

https://www.amazon.com/gp/aw/d/B013F9JJ72

Maybe an adapter between them?

I used this for an extender (plus it gives me a smart plug to control a lamp):
https://www.amazon.com/gp/product/B07P889L8M/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

I also bought a few Peanut plugs for Zigbee.

This $25 thing will get you halfway there!

Century Wireless Remote Control Electrical Outlet Switch for Household Appliances, White (Learning Code, 5Rx-2Tx) https://www.amazon.com/dp/B01N23GRYD/ref=cm_sw_r_cp_apa_Zhp2Bb7B3RB99

Maybe something like this?

3-Pack Sonoff WiFi Switch Wireless Remote Control Smart Switch Module ABC Shell Socket For DIY Smart Home https://www.amazon.com/dp/B075CC9J2W/ref=cm_sw_r_cp_apa_i_CoSuDbX751ZQP